Constructive Reuse of Free-Surface Ghost Wavefields in Marine Seismic Data: A Propagation-Based Framework
summary
The gist
Constructive Reuse of Free-Surface Ghost Wavefields in Marine Seismic Data: A Propagation-Based Framework is a study that proposes a propagation-based framework where decomposed free surface ghost…
In short
This study proposes a propagation-based framework to treat decomposed free surface ghost wavefields as physically meaningful components that can be constructively reused to enhance seismic data. By using a finite inverse expansion, it allows for recursive decomposition and restoration of wavefields, suggesting a unified approach where acquisition geometry and ghost processing are jointly optimized.
Key concepts
- Free Surface Ghosts
- These arise from seismic waves reflecting off the sea surface, which acts like a pressure-release boundary. They appear in the observed data as periodic spectral notches and can attenuate low-frequency energy, limiting usable bandwidth.
- Finite Inverse Expansion
- This is a mathematical method derived from the ghost operator that expresses its inverse as a finite sum rather than an infinite filter. This allows for recursive decomposition of ghost components by terminating after a specific number of terms related to the recording interval.
- Constructive Reuse Strategy
- Decomposed ghost wavefields are transformed using polarity reversal and propagation correction. Superimposing the corrected ghost estimate with the direct estimate results in a final signature that shows improved signal strength and better reflector continuity compared to using only the direct estimate.
Terminology used across episodes
This episode discusses
- Constructive Reuse of Free-Surface Ghost Wavefields in Marine Seismic Data: A Propagation-Based Framework · Paper Radio
The paper
Constructive Reuse of Free-Surface Ghost Wavefields in Marine Seismic Data: A Propagation-Based Framework · Read on arXiv
Arc Geo Support Co., Ltd. · Kyoto University
Recent advances in marine seismic acquisition and processing have substantially improved the decomposition of free surface ghost wavefields. Building upon these developments, this study proposes a propagation-based framework in which decomposed ghost wavefields are treated as physically meaningful components that can be constructively reused as additional wavefield components. Starting from a finite inverse expansion of the ghost operator, a recursive formulation is derived and implemented through adaptive predictive decomposition. The formulation is subsequently extended to multidimensional wavefields through wavefield extrapolation and reciprocity, enabling decomposition into components associated with real and mirrored sources and receivers. The decomposed wavefields are then restored to a common acquisition geometry by survey sinking and combined through wavefield superposition, forming a preprocessing module that can be incorporated into conventional marine seismic processing workflows. Synthetic examples demonstrate increased signal strength through ghost reuse, spectral amplitude recovery of ghost-related notches including frequencies near DC, and clear decomposition of ghost-related wavefield components. Field-data examples acquired using a conventional shallow-towed airgun survey further demonstrate improvements in reflector continuity and coherent reflection energy, together with partial restoration of spectral amplitudes degraded by the free surface ghost, supporting the practical applicability of the proposed framework. The proposed framework therefore provides a processing-based complement to conventional ghost decomposition technologies and suggests a unified approach in which acquisition geometry and ghost processing are jointly optimised to maximise the usable wavefield information.
Transcript
Introduction to the show: ident: Physics. The day in general physics: instruments, methods and results across the field.
Kai: I'm Kai.
Mira: And I'm Mira, here with Lev.
Kai: We're looking at the paper: "Constructive Reuse of Free-Surface Ghost Wavefields in Marine Seismic Data".
Mira: Here's the gist of the paper. Constructive Reuse of Free-Surface Ghost Wavefields in Marine Seismic Data: A Propagation-Based Framework is a study that proposes a propagation-based framework where decomposed free surface ghost wavefields are treated as physically meaningful components that can be constructively reused as additional wavefield components This approach provides a processing-based complement to conventional ghost decomposition technologies and suggests a unified approach in which acquisition geometry and ghost processing are jointly optimised to maximise the usable wavefield information Theoretical Foundation of Ghost Interpretation Free surface ghosts arise from the reflection of seismic wavefields at the sea surface, which acts as an approximately pressure-release boundary in marine environments From a kinematic perspective, free surface ghosts can be represented as delayed replicas of the primary wavefields In the frequency domain, the superposition of primary and ghost wavefields modulates the observed wavefield spectrum, producing periodic spectral notches whose locations depend explicitly on the towing depths of the source and receivers Decomposition Methodology The study derives a recursive formulation from the finite inverse expansion of the ghost operator, providing the theoretical basis for recursive predictive decomposition The ghost operator is formulated in terms of a propagation operator acting on finite-length seismic records, allowing its inverse to be expressed as a finite expansion rather than an infinite recursive filter This leads to the observation that the propagation operator is nilpotent when defined over the finite recording interval, meaning it terminates after a finite number of terms The resulting inverse operator is therefore a finite-duration operator and is represented by the finite expansion Constructive Reuse Strategy The decomposed ghost wavefields may be transformed into equivalent ghost-free wavefields through polarity reversal and propagation correction The final direct-signature estimate is obtained by wavefield superposition of the direct estimate and the corrected ghost estimate The stacking operation consistently exhibits a lower RMS error and a higher correlation coefficient than the direct estimate alone over the entire range of input S/N ratios examined Multidimensional Extension and Application The finite inverse expansion can be naturally extended to multidimensional wavefields by generalizing the temporal delay representation to a multidimensional wavefield-extrapolation operator The decomposition is performed in two successive stages: sourceside decomposition in the common-shot domain followed by receiver-side decomposition in the common-receiver domain Survey sinking restores a common acquisition geometry, and wavefield superposition combines the decomposed components to produce a reconstructed S-R gather Practical Outcomes and Implications Field-data examples demonstrate that the decomposed ghost wavefields can be constructively reused to enhance coherent reflection amplitudes and improve reflector continuity The proposed framework suggests that deeper towing may become advantageous because of its improved signal-to-noise ratio, enhanced operational stability, and reduced sensitivity to environmental conditions The study concludes that free surface ghosts can be interpreted not solely as unwanted noise, but as reusable physical wavefield components for coherent signal enhancement Future Directions Potential applications include variable-depth streamer surveys, over/under streamer configurations, dual-sensor streamer technologies, and future broadband acquisition systems Future developments may involve the joint optimisation of acquisition geometry, source design, and ghost processing rather than treating them as independent stages of the seismic workflow The mirror-source interpretation suggests that marine seismic acquisition and processing need not be regarded as independent stages of the exploration workflow The proposed framework provides a unified physical interpretation of ghost decomposition, restoration, and constructive reuse The study demonstrates that free surface ghosts can be interpreted not solely as unwanted noise, but as reusable physical wavefield components for coherent signal enhancement The proposed framework may also contribute to the recovery of low-frequency energy attenuated by the free surface ghost response The proposed framework is applicable to both future broadband acquisitions and legacy marine seismic datasets References Amundsen, L., Zhou, H., Reitan, A., Weglein, A.
Kai: B.
Mira: (2013).
Kai: On seismic deghosting by spatial deconvolution Berkhout, A.
Title and authors: Kai: So this paper is titled "Constructive Reuse of Free-Surface Ghost Wavefields in Marine Seismic Data: A Propagation-Based Framework". It sounds very technical, but at its core, it’s about how we can actually use the noise caused by the sea surface reflection.
Mira: Yeah, it’s tackling the idea that those ghosts aren't just junk; they might actually be physical components of the wavefield itself that we can use to make things better. It suggests a way to go beyond just cleaning up data.
Lev: From an error correction standpoint, I wonder if this framework is practical when you try to implement it on real hardware with limited resources. We’re talking about turning something that’s supposed to be noise into something we can use for actual imaging, and that's a big engineering lift.
Kai: Right, the paper proposes a propagation-based method starting from a finite inverse expansion of the ghost operator to derive a recursive formulation for this reuse. It sets up this entire process as being data-adaptive through predictive decomposition.
Mira: What’s interesting is they extend this to multidimensional wavefields by using wavefield extrapolation and reciprocity, which means you can decompose the signal based on both the source and receiver domains simultaneously. That’s a big step from just looking at a one dimension.
Lev: If it works in that multidimensional sense, it implies we could be separating real reflections from mirrored ones more cleanly before even starting the final reconstruction phase. That would significantly reduce the computational overhead on actual hardware running these kinds of algorithms.
The paper's summary: Kai: They summarize this by saying that decomposing those ghost wavefields allows you to transform them into equivalent ghost-free wavefields through polarity reversal and propagation correction. Then, you superimpose the direct estimate with this corrected ghost estimate to get a final direct signature.
Mira: The key result they point to is that when you stack the direct estimate and this corrected ghost estimate together, the stacking operation consistently shows a lower root mean square error and a higher correlation coefficient than just using the direct estimate by itself across all input signal-to-noise ratios they tested.
Lev: That improvement in RMS error is what matters for real data processing; it means cleaner results even when the signal quality is poor, which is crucial for deep ocean surveys where noise gets bad fast.
Kai: The paper also shows synthetic examples demonstrating increased signal strength through this ghost reuse, and they can recover spectral amplitude notches that were degraded by the free surface ghost response, including frequencies right near DC.
Mira: So they aren't just cleaning up the signal; they’re actually recovering information that was previously lost in those specific frequency bands due to the sea surface effect. It suggests a deeper level of data recovery than traditional deghosting.
Lev: If you can recover spectral notches near DC, that points to potentially recovering low-frequency energy that gets totally attenuated by the free surface response, which is something we’ve always struggled with in marine applications.
The paper's improvements: Kai: The authors suggest several key improvements. First, they move away from simple recursive filters by deriving a finite inverse expansion where the ghost operator is formulated through a propagation operator acting on finite-length seismic records. This means the inverse is a finite expansion, not an infinite filter.
Mira: That finiteness is crucial because it allows for recursive predictive decomposition using an auxiliary wavefield, which they define as u of z equals one I plus r P of z cubed q of z, and the update rule for q of z is u of z minus q of z. It makes the process more tractable.
Lev: But then they introduce an adaptive propagation operator estimation. They say you can estimate this using a finite-length prediction error filter from the current residual wavefield to account for noise, wavelet distortion, and local variations in the effective ghost delay. That’s where I get cautious; estimating a good predictor reliably on noisy real data is always tough for hardware implementation.
Kai: They then show how you can extend this finite inverse expansion to multidimensional wavefields by generalizing the temporal delay representation into a multidimensional wavefield extrapolation operator, which allows decomposition based on source and receiver mirroring.
Mira: And they show that survey sinking restores a common acquisition geometry, and then combining the decomposed components through wavefield superposition produces a reconstructed S-R gather. This whole workflow is framed as a unified preprocessing module.
Lev: It’s ambitious to suggest that survey sinking can be used *within* this framework for constructive combination, rather than just as an external step to fix geometry issues. That moves the optimization of acquisition geometry and ghost processing into a single joint optimization problem.
Conclusion: Kai: To wrap up, the main point is that free surface ghosts can be reinterpreted not just as unwanted noise, but as deterministic propagation phenomena we can actually use for coherent signal enhancement. It links decomposition to mirror-image interpretation and survey sinking.
Mira: So what this means for the field is that they are proposing a unified physical interpretation where ghost decomposition, mirror-image interpretation, survey sinking, and wavefield superposition all work together in one preprocessing workflow.
Lev: For the real world of quantum hardware or high-fidelity seismic processing, it means we have a structured way to see how these effects propagate through the system instead of just fighting them with post-processing filters. It’s a new way to approach signal integrity that might actually be applicable even to legacy data sets.
Kai: Exactly. This framework offers a path toward enhancing coherent reflection amplitudes and reflector continuity in field-data examples, suggesting deeper towing might become better because of the improved signal-to-noise ratio they see.
Mira: It’s about treating the ghosts as reusable physical components rather than something to be discarded, which is a fundamental shift in how we approach data quality problems in marine seismic imaging.
Lev: I think what stands out is that it suggests that marine seismic acquisition and processing don't have to be treated as completely independent stages anymore; it’s about joint optimization from the start.
More episodes
- 2611.14082-Two atoms with strong light-induced dipolar interactions
- 2611.14040-Characterization of BNLs 20 and 30 micrometer thick LGADs for the Electron Ion Collider
- 2611.13399-Lift-element-based dynamic network of vortex gust-airfoil interactions
- 2611.13476-Hopfion Superlattices in 3D Twisted Moir'e Light Fields
- 2611.13642-Investigation of the timing performance of double-sided p-type 3D silicon sensors produced by CNM
- 2611.13830-SiPM optical readout of a PICOSEC Micromegas precise timing detector
- 2611.14152-Where are the shortest-path nodes in spatial networks?
- 2611.14219-Sub-Ice: semi-automated mapping of basal channels from ice shelf surface elevation data
- 2611.16341-SUMNO: Spatially Unrolled Multigrid Neural Operator for Fluid Flow Surrogates
- 2611.16090-Multi-UTE Myelin Fraction Mapping: Repeatability and Cross-Field-Strength Reproducibility at 1.5T and 3T