Aquatic locomotion by an elastically mounted flexible foil actuated by an oscillating force

summary

The gist

An analytical formulation of the fluid-structure interaction of a flexible foil driven by an oscillating force actuating on its elastically mounted leading edge, so that it can heave…

In short

This study developed an analytical model for a flexible foil driven by an oscillating force to investigate its aquatic locomotion. The model uses a virtual rigid body carrying mass and drag, allowing for passive heave, pitch, and deformation. Findings show that including flexibility expands the optimal operating range and identifies new local maximum performance points near the translational spring branch.

Key concepts

VB-OF Model
This model treats the aquatic body as a virtual rigid body that is self-propelled by a rear oscillating foil. It is used because it enables an analytical solution for how the fluid forces interact with this structure, simulating muscle flexibility in the foil.
Euler-Bernoulli Beam Equation
This equation describes the bending of the flexible foil along its chord length. By solving this equation using a small displacement approximation, researchers can derive the fluid forces and moments acting on the foil based on its deformation.
Non-dimensional Parameters
These are parameters like frequency and stiffness that are scaled to make equations simpler and easier to solve. Redefining them with a 'hat' symbol simplifies the system of linear equations, allowing for an iterative process to find optimal performance values.
Translational Spring Branch
This specific branch in the spring resonance analysis is identified as a location where optimal self-propulsion performance occurs. The study found that better locomotion is achieved when operating near this branch, especially when the foil's stiffness is not too rigid.

Terminology used across episodes

This episode discusses

The paper

Aquatic locomotion by an elastically mounted flexible foil actuated by an oscillating force · Read on arXiv

R. Fernandez-Feria

Fluid Mechanics Group, IMEC, University of Malaga

An analytical formulation of the fluid-structure interaction of a flexible foil driven by an oscillating force actuating on its elastically mounted leading edge, so that it can heave, pitch and deform passively with the hydrodynamic forces, is used to investigate the aquatic locomotion of a body, responsible for the whole drag and thrusted by the oscillating flexible foil. The small-amplitude theoretical model is validated with previous theoretical and experimental results for a body propelled by a rigid plate oscillating with a prescribed heaving motion and passive pitch. The inclusion of passive heave and deformation allows to expand the parametric ranges for optimal self-propulsion conditions in terms of length travelled by flapping cycle (stride length) and locomotion efficiency. In addition to the known optimal locomotion condition localized near the resonance of the torsional spring on which the foil is elastically mounted, which here is modulated by its coupling with the resonances of the translational spring and of the structural deformation of the foil, another even better local optimal locomotion condition is found near the translational spring branch of the elastic support resonance that occurs at lower stiffnesses of both springs. Unlike the local maximum of efficiency close to the natural frequency associated with the torsional spring branch, which increases with the stiffness of the foil, being the highest for a rigid foil, the larger local maximum associated with the translational spring branch increases as the stiffness of the foil decreases.

DOI: 10.1016/j.jfluidstructs.2026.104750

Transcript

Introduction to the show: ident: Physics. The day in general physics: instruments, methods and results across the field.

Kai: We're looking at the paper: "Aquatic locomotion by an elastically mounted flexible foil actuated by an oscillating force".

Mira: Here's the gist of the paper. An analytical formulation of the fluid-structure interaction of a flexible foil driven by an oscillating force actuating on its elastically mounted leading edge, so that it can heave, pitch and deform passively with the hydrodynamic forces, is used to investigate the aquatic locomotion of a body responsible for the whole drag and thrusted by the oscillating flexible foil.

Kai: Model Development The study focuses on modeling aquatic locomotion using a virtual rigid body carrying most of the mass and drag, self-propelled by a rear oscillating foil that generates thrust.

Mira: The VB-OF model is used because it allows for an analytical solution of the flow-structure interaction.

Kai: This model differs from undulatory locomotion by modeling the oscillating foil as elastically connected to the virtual body, simulating muscle flexibility.

Title and authors: Kai: So let's talk about the title itself, "Aquatic locomotion by an elastically mounted flexible foil actuated by an oscillating force," and what it tells us right off the bat.

Mira: It immediately points to a system where flexibility and oscillation work together to drive movement in water.

Lev: And from what I can gather, it's not just about one thing happening, but how the foil deforms passively alongside the body as well.

Kai: They mention that this setup lets the foil heave, pitch, and deform passively with the hydrodynamic forces acting on it.

Mira: Which means they are exploring a much broader range of motion than if you just had a rigid plate oscillating in place.

The paper's summary: Kai: The paper summarizes their model as using this virtual rigid body carrying most of the mass and drag, which is then self-propelled by a rear oscillating foil that generates the thrust needed for locomotion.

Mira: They use what they call the VB-OF model, and they emphasize that this specific setup is different from undulatory locomotion you see in many real fish.

Lev: Undulatory motion involves a traveling wave along the whole body or fins to push fluid backward, whereas this paper models a distinct mechanism.

Kai: This model allows for passive heave and pitch plus the passive flexural deformation of the foil itself, all driven by an oscillating force that mimics muscle action.

Mira: And they use a small displacement approximation to derive the equations for those forces and moments by integrating them along the chord length of that foil.

The paper's improvements: Kai: The paper suggests that including this passive heave and deformation opens up a much wider parametric range when searching for optimal self-propulsion conditions.

Mira: They found a new local optimum condition near the translational spring branch of the elastic support resonance, which happens at lower stiffness values.

Lev: That's interesting because it suggests that for certain conditions, being less rigid isn't necessarily bad for performance; it actually helps find a better spot on the performance curve.

Kai: They also found that the best propulsion performance occurs near the translational spring branch when the non-dimensional frequency and stiffness values are small.

Mira: So, they’re saying that this flexibility really enhances stride length and efficiency associated with that translational spring mode for both small frequencies and stiffnesses.

Conclusion: Kai: So wrapping up, the main point is that this analytical model helps characterize the best self-propulsion performance for any set of given parameters, provided those resulting pitch, heave, and deformation amplitudes stay small.

Mira: They really highlight how including passive heave and deformation expands the parametric space available to search analytically for better locomotion conditions.

Lev: The conclusion is that the best propulsion performance is found near the translational spring branch for small non-dimensional frequency and stiffness values.

Kai: It points towards a not too rigid foil being optimal when you're looking at small non-dimensional frequency and stiffness values located around that translational branch of the springs resonance.

Mira: They also state that this flexibility lets you get the same thrust with smaller pitch and heave amplitudes than you would for a rigid foil, even up to an amplitude of one point two eight on that foil.

Lev: From an engineering standpoint, it's valuable because it gives them a solid approximation to analyze these fish-like robots, even for those larger heave amplitudes.

Kai: So the paper with this title shows that by adding flexibility, you can explore a better region for optimal locomotion conditions around the translational spring branch of the springs resonance.

More episodes

← Home