Neutral kaon mass measurement with the CMD-3 detector at VEPP-2000
summary
The gist
Using more than 600 thousand K0 S → π+π− decays from the e+e− → ϕ(1020) → K0SKO L reaction…
In short
Using over 600 thousand K0S to pi+pi- decays from e+e- -> phi(1020) -> K0SKO L, the CMD-3 detector measured the neutral kaon mass as m(K O S) = 497.587 ± 0.012 MeV/c^2. This result is in good agreement with other experiments, showing better accuracy than some previous measurements.
Key concepts
- Edge Angle ($\psi_c$)
- This is a specific angle measured between pions from the K0S -> pi+pi- decay. The formula used to calculate it relates this angle to the kaon mass and pion momenta, allowing for the determination of the kaon's mass in this experiment.
- Beam Energy Calibration
- The precise energy of the electron beam is crucial. This measurement uses a calibration based on the world average phi-meson mass to control and correct for any systematic errors in beam energy, which is identified as the largest source of uncertainty.
- Monte Carlo (MC) Simulation
- GEANT4 simulations are heavily used to model how particles interact with the detector. These simulations help correct for detector response effects and use the world-average kaon mass as an input to accurately predict signal events.
Terminology used across episodes
This episode discusses
The paper
Neutral kaon mass measurement with the CMD-3 detector at VEPP-2000 · Read on arXiv
E.P. Solodova, N.A. Petrovd R.R., Akhmetshina, A.N., Amirkhanova, A.V., Anisenkova, V.M., Aulchenkoa, N.S., Bashtovoya, D.E., Berkaeva, Bondara A.E., Bragina A.V., ¡ Epifanova D.A., ∘ Epshteyna L.B., Erofeeva A.L., Fedotovicha G.V., Ignatova F.V., Ivanova D.R., Ivanova V.L., Karpova S.V., ¡ Kazanina V.F., ¡ Koopa I.A., ∘ Korobova A.A., Kozyreva A.N., Krokovnya P.P., Kuzmina A.S., Logashenkoa I.B., Lukina P.A., ¡ Mikhailova K.Yu, ¡ Obraztsova I.V., ∘ Otboeva A.V., Otboeva Yu, Pestova YuN, Perevedentseva E.A., Popova A.S., Rogovskya YuA, ¡ Rubana A.A., ¡ Ryskulov N.M., ∘ Ryzhenenkova A.E., Semenova A.V., Senchenkoa I.A, Shatunova YuM, Shebalina V.E., Shemyakina D.N., ¡ Shwartza B.A., ¡ Shwartze D.B., Timoshenko A.V., Titova V.M., Talysheva A.A., Tolmacheva S.S., Vorobiova A.I, Zemlyanskya I.M., Zhadana D.S., ¡ Yudina YuV, Navas S.¡ et al., Lysenko A.P., Koop I.A., Barkov L.¡ M., Koop I.A., Barkov L.¡ M., Zaitsev A.S., Lai A.∘ et al., Ambrosino F., Tomaradze A.∘ et al., Danilov V.V., Koop I.A., Abakumova V.¡ et al., Grancagnolo F.¡ et al., Anisyonkov A.V.¡ et al., Epifanov D., Akhmetshin R.R., Agostinelli S.∘ et al., Kuraev E.A., Arbuzov A.B.¡ et al., Achasov M.N., Abakumova V.¡ et al., Kozyrev E.A., , Budker Institute of Nuclear Physics, Novosibirsk State University, Novosibirsk State Technical University, Institute for Nuclear Research RAS Moscow, P-cure Ltd Shilat Israel
Budker Institute of Nuclear Physics SB RAS Novosibirsk Russia · Novosibirsk State University Novosibirsk Russia · Novosibirsk State Technical University Novosibirsk Russia · Institute for Nuclear Research RAS Moscow Russia · P-cure Ltd Israel
Using more than 600 thousand K S 0 toπ+π- decays from the e+e-toϕ(1020) to K S 0K L 0 reaction, the neutral kaon mass has been measured with the CMD-3 detector at the VEPP-2000 collider. Using the beam energies control by the back-scattering laser light photons, and a calibration to the world average ϕ-meson mass, the neutral kaon mass is determind to be m(K 0) = 497.587 plus or minus 0.004(stat.) plus or minus 0.008(syst.) plus or minus 0.009(calibr.), where the first uncertainty is statistical, the second is systematic, and the third is the uncertainty from the energy calibration.
Transcript
Introduction to the show: ident: High Energy Physics: Experiment. The day in high-energy experiment: detectors, searches and limits.
Kai: We're looking at the paper: "Neutral kaon mass measurement with the CMD-3 detector at VEPP-2000".
Mira: Here's the gist of the paper. Using more than 600 thousand K0 S → π+π− decays from the e+e− → ϕ(1020) → K0SKO L reaction, the neutral kaon mass has been measured with the CMD-3 detector at the VEPP-2000 collider m(K O S) = 497.587 ± 0.012 MeV/c squared, where the first uncertainty is statistical, the second is systematic, and the third is the uncertainty from the energy calibration.
Kai: Measurement Methodology The neutral kaon mass was determined using a method based on measuring an opening angle between pions from the K0 S → π+π− decay, which is called the "edge angle", ψc m(K0 S) = r E squared K0 S sin squared ψc squared + 4m squared π cos squared ψc squared.
Mira: This method utilizes the beam energies controlled by the back-scattering laser light photons and a calibration to the world average ϕ-meson mass.
Kai: The detector's tracking system provides momentum, angles, and dE/dX for charged tracks 4.
Paper summary: Kai: So wrapping up this discussion on "Neutral kaon mass measurement with the CMD-three detector at VEPP-two thousand" <ref:2606.16779#pg1,Neutral kaon mass measurement with the CMD-3 detector at VEPP-2000>. The neutral kaon mass is determined to be four hundred ninety-seven point five eight seven MeV per c squared, with an overall uncertainty estimated as zero point zero one two four MeV per c squared.
Mira: That result is in good agreement with all high statistical experiments and has better accuracy than some of them. It shows that their method works well for getting a precise number in this context.
Lev: The precision of the measurement is really dominated by the uncertainties in the energy measurements, which we talked about earlier, specifically the beam energy calibration using the world average phi meson mass.
Kai: So when you look at what this paper implies for the future, it's that achieving even better precision will require focusing on controlling those beam energies and nailing those systematic error budgets down. It’s a practical engineering challenge as much as a theoretical one.
Mira: I think the main implication is demonstrating that this specific edge angle approach can yield results with high accuracy when you properly handle the various corrections like radiative effects and angle corrections.
Lev: And for future work, we need to look at how to build on this by developing error correction techniques that account for those energy shifts at phi resonance and maybe explore ways to reduce the impact of those radiative effects further.
Kai: So yeah, that's the essence of it—it’s a very detailed measurement where the final result is really as much about controlling how you measure things than just collecting enough data.
Conclusion: Kai: So, we've looked at how they measured that neutral kaon mass using those pion decays from the K zero S to pi plus pi minus decay, and now we're getting to the wrap-up of this paper.
Mira: They’re calling it "Neutral kaon mass measurement with the CMD-three detector at VEPP-two thousand." It sounds very specific, doesn't it?
Lev: Yeah, it is specific because they are talking about a particular detector setup and a particular measurement technique. I mean, for real hardware like what we build for error correction research, those details matter a ton for the overhead.
Kai: Exactly. The authors are essentially presenting how to get that neutral kaon mass number with this method, and it gives us a very precise value of four hundred ninety-seven point five eight seven MeV per c squared.
Mira: It's good that they managed to get a result that agrees well with all the other high statistical experiments we have done on this. It shows the consistency across different measurements.
Lev: But we gotta remember, the uncertainty budget is what really tells us how much real hardware noise or calibration error is messing with that number. The second largest source of error comes from how they calibrate their beam energy using the phi meson mass data.
Kai: Right, so even if the statistical counting of those decay events was perfect, you still have to deal with that systematic uncertainty from calibrating your energy scale against something else.
Mira: That calibration constant they mentioned, delta E send, is a key piece of information because it points to where the biggest systematic uncertainty lies in their setup.
Lev: For us on the hardware side, that means any drift or instability in the back scattering laser system will directly translate into an error in our final energy measurement for anything we try to calibrate.
Kai: So, basically, they’ve shown a successful way to get a tight number, but the next step is figuring out how to minimize that dependency on external calibrations.
Mira: That's what I think it means for the world right now—it validates this specific measurement technique as being robust for this type of particle.
Lev: It proves the methodology works, but it doesn't solve the fundamental problem of needing perfect energy control to get a result that is truly useful for real physics experiments.
More episodes
- Daily Summary for 2026-11-19
- 2512.21290-Model-independent ZH production cross section at FCC-ee
- 2610.21982-First Observation of the Radiative Decay D 0 to gamma omega
- The day in conversation for 2026-11-19
- Daily Summary for 2026-11-19
- Daily Summary for 2026-11-18
- 2512.08065-Searches for Light Dark Matter and Evidence of Coherent Elastic Neutrino-Nucleus Scattering of Solar Neutrinos with the LUX-ZEPLIN (LZ) Experiment
- Daily Summary for 2026-11-18
- 2508.18022-Precision Measurements of the Electroweak Mixing Angle in the Region of the Z pole at the Large Hadron Collider
- 2512.23992-Prospect for measurement of CP-violating parameters of B s 0 to phi gamma at the Tera Z factory