Precision Measurements of the Electroweak Mixing Angle in the Region of the Z pole at the Large Hadron Collider

summary

The gist

Precision Measurements of the Electroweak Mixing Angle in the Region of the Z pole at the Large Hadron Collider reports a more precise extraction of sin2θleff via an updated analysis of CMS…

In short

The analysis used updated CMS Drell-Yan measurements at 13 TeV to precisely extract sin2θℓeff, a key electroweak mixing angle parameter. By applying advanced PDF profiling techniques using W and Z boson production data, the experiment achieved a highly precise value (0.23154 ± 0.00024), which strongly agrees with Standard Model indirect predictions and competitive with previous measurements.

Key concepts

sin2θℓeff
This is a parameter describing the mixing angle in the electroweak sector of particle physics, specifically related to how the electromagnetic and weak forces interact. Measuring it precisely tests the consistency of the Standard Model.
PDF Profiling (A4 technique)
This is a method used to constrain Parton Distribution Functions (PDFs)—which describe how quarks and gluons inside protons behave—by using specific kinematic distributions like A4. This technique significantly reduces uncertainties in the PDF inputs, leading to a more reliable final measurement.
Drell-Yan AFB Measurements
This refers to measurements made by the CMS experiment at 13 TeV involving Drell-Yan processes (producing a lepton pair). These measurements are used as input for extracting sin2θℓeff and provide complementary tests to other experimental methods.
PDF Uncertainty Reduction
The paper demonstrates how incorporating additional constraints, such as W/Z cross-section ratios, helps reduce the uncertainty associated with the underlying PDF sets. This shows a systematic way to improve the accuracy of LHC extractions.

Terminology used across episodes

This episode discusses

The paper

Precision Measurements of the Electroweak Mixing Angle in the Region of the Z pole at the Large Hadron Collider · Read on arXiv

Department of Physics and Astronomy, University of Rochester · Department of Physics and Astronomy, Seoul National University

In the Standard Model (SM), the effective leptonic weak mixing angle 2θ eff can be predicted to very high accuracy by using the experimental values of the mass of the Z boson (M Z), the Fermi constant, the fine structure constant, the mass of Higgs boson, the quark masses, and the value of the Quantum Chromodynamics (QCD) strong coupling (α s) at M Z. Therefore, deviations of measurements from SM predictions can be indications of new physics. With recent advances in experimental and analysis techniques, measurements of 2θ eff at the Large Hadron Collider (LHC), extracted from the forward-backward asymmetry (A FB) in Drell-Yan dilepton events, are now competitive with previously published measurements at e+e- collider experiments. We report on a more precise extraction of the effective leptonic weak mixing angle via an updated analysis of the CMS Drell-Yan A FB measurements at 13 TeV. We obtain 2θ eff =0.23154 plus or minus 0.00024 with additional PDF constraints from measurements of the W decay lepton charge asymmetry at 13 TeV and the W/Z cross section ratios. It is the most precise single experiment measurement to date and is in excellent agreement with the SM 2026 indirect prediction of 0.23152 plus or minus 0.00006.

Transcript

Introduction to the show: ident: High Energy Physics: Experiment. The day in high-energy experiment: detectors, searches and limits.

Kai: We're looking at the paper: "Precision Measurements of the Electroweak Mixing Angle in the Region of the Z pole at the Large Hadron Collider".

Title and authors: Kai: Moving on to the title and authors of "Precision Measurements of the Electroweak Mixing Angle in the Region of the Z pole at the Large Hadron Collider." The authors are Arie Bodek, Hyon-San Seo, and Un-Ki Yang.

Mira: I think it’s important to see who is doing this work because it shows a collaboration between different institutions, like Rochester and Seoul National University.

Lev: From an error correction perspective, having expertise from different groups means you're checking assumptions from multiple angles before committing to a result.

Kai: They are tackling the measurement of sin2 theta l eff in the region of the Z pole using data from the Large Hadron Collider, specifically looking at Drell-Yan events.

Mira: The title tells us this is about achieving high precision in measuring that effective leptonic weak mixing angle, sin2 theta l eff.

Lev: That quantity is crucial because it's a key parameter in the Standard Model that we can predict with very high accuracy using other known values like the mass of the Z boson and the fine structure constant.

Kai: So, in simple terms, they are using LHC data from Drell-Yan events to get a highly precise measurement of sin2 theta l eff.

Mira: And what's special about this paper is that they aren't just reporting one measurement; they are doing a comparison against both old electron collider results and theoretical predictions.

Lev: That comparison is what makes the result meaningful, because it tells us if the Standard Model still holds up under these new experimental conditions.

Kai: It’s about seeing if our measurements match what we expect from the Standard Model at this level of precision.

The paper's summary: Mira: The summary of "Precision Measurements of the Electroweak Mixing Angle in the Region of the Z pole at the Large Hadron Collider" tells us they are using updated CMS Drell-Yan AFB measurements at thirteen TeV <ref:2508.18022#pg2,at the Large Hadron Collider>.

Kai: That means they’re looking at dilepton events produced by proton collisions where we measure how the negative lepton is distributed in a specific angle called the Collins-Soper frame.

Lev: So, the measurement itself relies on taking that polar-angle distribution and writing it as a function of rapidity and mass of the dilepton pair.

Mira: The mathematical expression they use for this distribution is d sigma d theta proportional to one plus cos two theta plus A naught squared times one minus three cos two theta plus A four cos theta.

Lev: They then mention that for full acceptance, integrating over the cosine of the angle gives them Afull FB equal to three over eight times A four.

Kai: They explain that because the incoming quark direction isn't known event by event, they estimate it from the boost direction of the dilepton pair, which is based on valence quarks carrying more momentum than sea antiquarks.

Mira: So, in short, they are extracting sin2 theta l eff at thirteen TeV from this angular distribution by using that specific formula <ref:2508.18022#pg2>.

Lev: The summary also points out that the dominant source of uncertainty in their measurement comes from the uncertainties in the proton parton distribution functions.

Kai: That’s exactly what we discussed before, and they spend a lot of time on how to handle those PDFs by using re-weighting and profiling techniques.

Mira: So, in short, they are extracting sin2 theta l eff at thirteen TeV from Drell-Yan events while explicitly showing how the PDF uncertainties impact the final result <ref:2508.18022#pg2>.

The paper's improvements: Kai: The paper highlights that their main improvement comes from incorporating additional recent CMS measurements of W and Z boson production into the PDF profiling analysis.

Lev: That’s a key methodological step because those extra constraints reduce both the PDF uncertainty and the spread among modern PDF sets.

Mira: They use these measurements—the CMS thirteen TeV W boson decay lepton asymmetry and the W to Z cross section ratios at five point zero two and thirteen TeV—to refine their input PDFs <ref:2508.18022#pg3>.

Kai: When they include those, it leads them to a final extracted value of sin2 theta l eff equal to zero point two three one five four plus or minus zero point zero zero zero two four <ref:2508.18022#pg2>.

Lev: So, the impact is twofold: first, the PDF uncertainty gets reduced because of the new constraints, and second, you get a tighter final measurement.

Mira: That final number is in excellent agreement with the two thousand twenty-six Standard Model indirect prediction for one to M Z W divided by M Z <ref:2508.18022#pg1>.

Kai: It also gives us a useful input for reducing PDF uncertainties in other LHC extractions, which is a nice cross-over benefit.

Conclusion: Mira: So wrapping up the paper "Precision Measurements of the Electroweak Mixing Angle in the Region of the Z pole at the Large Hadron Collider." The main implication is that this analysis shows a more precise extraction method for sin2 theta l eff at thirteen TeV <ref:2508.18022#pg2>.

Kai: It’s about showing how combining Drell-Yan data with W and Z production ratios can give us a much cleaner measurement by constraining the input PDFs better.

Lev: The final result is that the value of sin2 theta l eff is zero point two three one five four plus or minus zero point zero zero zero two four, which is very consistent with the Standard Model's indirect prediction <ref:2508.18022#pg2>.

Kai: This paper demonstrates that even with complex uncertainties in PDFs, smart constraint application can still lead to a result competitive with electron collider measurements.

Mira: It really shows the power of combining different types of constraints to verify fundamental parameters like sin2 theta l eff against theory.

Lev: And for us as an error correction folks, it confirms that building hardware for real hardware means you need these kinds of complex, multi-faceted analyses to get meaningful performance metrics.

Kai: So we’ve discussed the "Precision Measurements of the Electroweak Mixing Angle in the Region of the Z pole at the Large Hadron Collider" and how they use profiling to reduce PDF uncertainties.

Mira: It’s a solid piece of work that gives us confidence in our measurements when we look at fundamental electroweak parameters.

Lev: We're ready for whatever is next, but for now, we keep digging into those high-luminosity data projections.

More episodes

← Home