Electromagnetic Shower Reconstruction and Identification in FASER's Emulsion Detector for LHC Forward Neutrino Measurements
summary
The gist
Electromagnetic shower reconstruction and identification methods were developed for the FASERnu emulsion detector using test-beam data to validate a framework for electron neutrino identification at…
In short
Researchers developed a method to reconstruct and identify electromagnetic showers in FASERnu's emulsion detector using test-beam data. The system uses adaptive clustering for reconstruction and a three-stage identification chain (pre-selection, cut-based, BDT classifier) to achieve extremely high background rejection rates. This framework provides reliable electron neutrino identification across a wide energy range without needing energy-dependent tuning.
Key concepts
- Adaptive Clustering
- This is the technique used to find the shower axis. Instead of setting fixed parameters based on expected energy, the algorithm adjusts its search volume and grouping method based on how densely packed the actual segments are locally. This allows for accurate reconstruction regardless of whether a shower is at 100 GeV or 200 GeV.
- Multi-level Identification Chain
- This is a three-step process to separate genuine showers from background noise (like muons). It starts with filtering tracks, then uses simple cuts to remove most remaining muons, and finally employs a sophisticated Boosted Decision Tree (BDT) classifier. This layered approach ensures very high purity while keeping the signal efficiency high.
- BDT Classifier Features
- The BDT classifier distinguishes showers by analyzing ten specific shape variables: six related to the shower's length (longitudinal), three related to its width (transverse), clustering metrics, and one angular variable. These features are chosen because they remain stable across different energies, allowing one trained model to work effectively for 50 GeV and above.
- Energy Reconstruction via Segments
- The total number of reconstructed segments ($N_{total}$) in the shower is used as an estimator for its energy. This method provides relative energy biases that are predictable based on the beam energy (e.g., +0.6% at 100 GeV). The resolution of this estimate is relatively high, allowing for calibrated measurements despite detector imperfections.
Terminology used across episodes
This episode discusses
- Electromagnetic Shower Reconstruction and Identification in FASER's Emulsion Detector for LHC Forward Neutrino Measurements · Paper Radio
- Detecting and Studying High-Energy Collider Neutrinos with FASER at the LHC
- Technical Proposal for FASER: ForwArd Search ExpeRiment at the LHC
- The FASER Detector
- Technical Proposal: FASERnu
- Neutrino Rate Predictions for FASER
- First neutrino interaction candidates at the LHC
- First Direct Observation of Collider Neutrinos with FASER at the LHC
- First Measurement of the nu e and nu mu Interaction Cross Sections at the LHC with FASER's Emulsion Detector
- Momentum Measurement of Charged Particles in FASER's Emulsion Detector at the LHC
- Observation of collider muon neutrinos with the SND@LHC experiment
- Observation of collider neutrinos without final state muons with the SND@LHC experiment
- A Low Energy Rare Event Search with the Majorana Demonstrator
- Reconstruction and Performance Evaluation of FASER's Emulsion Detector at the LHC
- XGBoost: A Scalable Tree Boosting System
The paper
Electromagnetic Shower Reconstruction and Identification in FASER's Emulsion Detector for LHC Forward Neutrino Measurements · Read on arXiv
Roshan Mammen Abraham, Xiaocong Ai, Saul Alonso Monsalve, John Anders, Emma Kate Anderson, Akitaka Ariga, È Tomoko Ariga, f Jeremy Atkinson, Ɠ Florian U. Bernlochner, ᐫ Jianming Bian, Tobias Boeckh, Eli Bornand, Jamie Boyd, Lydia Brenner, Angela Burger, Franck Cadoux, Roberto Cardella, David W. Casper, Charlotte Cavanagh, Shiyang Chen, Xin Chen, Xing Cheng, Dhruv Chouhan, Andrea Coccaro, Fabio Cufino, Stephane Débieux Ansh Desai, œ Sergey Dmitrievsky, Radu Dobre, Monica D’Onofrio, Sinead Eley, Yannick Favre, Jonathan L. Feng, Carlo Alberto Fenoglio, Didier Ferrere, Max Fieg, Wissal Filali Elena Firu Haruhi Fujimori Edward Galantay Stephen Gibson Yuri Gornushkin Yotam Granov Jinjing Gu Carl Gwilliam Elie Hammou Daiki Hayakawa Michael Holzbock Shih-Chieh Hsu Zhen Hu Lekai Yao Daichi Yoshikawa Shunliang Zhang Yuxuan Zhang Xingyu Zhao, Eli Welch, Aaron White, Monika Wielers, Benjamin James Wilson Zhongyi Wu, Yue Xu Heng Yang Yi Liu Jiaxi Liu Jinfeng Liu Yi Liu Margaret S. Lutz Joern Mahlstedt Toni Mäkelä Yasuhiro Maruya Anna Mascellani Lawson McCoy Josh McFayden Andrea Pizarro Medina Hiroaki Menjo Toshiyuki Nakano Laurie Nevay Yuma Ohara Ken Ohashi Hidetoshi Otono Lorenzo Paolozzi Annabelle Parry Pawan Pawan Brian Petersen Titi Preda Markus Prim Junkai Qin Michaela Queitsch-Maitland Hiroki Rokujo André Rubbia Osamu Sato Paola Scampoli Kristof Schmieden Matthias Schott Cristiano Sebastiani Anna Sfyrla Davide Sgalaberna Mansoora Shamim Yosuke Takubo Kakeru Tanaka Noshin Tarannum Simon Thor Eric Torrence Serhan Tufanli Oscar Ivan Valdes Martinez Svetlana Vasina Emanuele Villa Benedikt Vormwald Chi Wang Yuxiao Wang, Eli Welch, Aaron White, Monika Wielers
Department of Physics and Astronomy, University of California, Irvine · School of Physics, Zhengzhou University · Institute for Particle Physics, ETH Zurich · University of Liverpool · É CERN
We present methods for electromagnetic shower reconstruction and identification in the FASERnu emulsion detector using 100 GeV and 200 GeV electron test-beam data from the CERN SPS H4 beamline. The reconstruction employs a clustering-based algorithm without energy-dependent tuning to determine shower axes. A multi-level identification chain comprising track pre-selection, a cut-based selection, and a BDT classifier achieves combined background rejection rates of 99.99% (100 GeV) and 99.94% (200 GeV). The method reaches total reconstruction and identification efficiencies of 58.9% (100 GeV) and 70.8% (200 GeV) evaluated from simulated samples. Energy reconstruction using the total number of reconstructed segments as the calorimetric estimator yields relative biases of +0.6% (100 GeV) and-0.8% (200 GeV), with resolutions of 25.4% and 22.6%, respectively. Systematic uncertainties on the energy reconstruction are dominated by variations in emulsion film detection efficiency, with totals of (+10.9%/-8.2%) at 100 GeV and (+10.3%/-6.9%) at 200 GeV. The methodology provides a validated framework for electron neutrino identification with the FASERnu detector at the LHC.
DOI: 10.1088/1748-0221/21/10/P10044
Transcript
Introduction to the show: ident: High Energy Physics: Experiment. The day in high-energy experiment: detectors, searches and limits.
Kai: We're looking at the paper: "Electromagnetic Shower Reconstruction and Identification in FASER's Emulsion Detector for LHC Forward Neutrino Measurements".
Mira: Here's the gist of the paper. Electromagnetic shower reconstruction and identification methods were developed for the FASERnu emulsion detector using test-beam data to validate a framework for electron neutrino identification at the LHC The reconstruction employs a clustering-based algorithm without energy-dependent tuning to determine shower axes The multi-level identification chain comprising track pre-selection, a cut-based selection, and a BDT classifier achieves combined background rejection rates of 99.99% (100 GeV) and 99.94% (200 GeV) The method reaches total reconstruction and identification efficiencies of 58.9% (100 GeV) and 70.8% (200 GeV) evaluated from simulated samples.
Kai: Experimental Setup and Data Quality Emulsion modules were exposed to electron and muon beams at CERN SPS H4 beamline in 2023, providing mono-energetic electron samples at 100 GeV and 200 GeV.
Mira: The experimental setup is shown in Figure 2 The target exposure density was approximately 8 electrons/cm squared.
Kai: Beam conditions achieved were characterized by an electron purity of >80% for the 100 GeV module and >90% for the 200 GeV module.
Title and authors: Kai: This paper's title is "Electromagnetic Shower Reconstruction and Identification in FASER's Emulsion Detector for LHC Forward Neutrino Measurements". It tells you exactly what the paper is about.
Mira: It’s essentially detailing the methods they developed for reconstructing and identifying those electromagnetic showers using their emulsion detector setup at FASER, which is key for studying neutrino interactions at the LHC.
Lev: What does that mean in plain terms? They are showing how to take raw tracks seen in the emulsion and turn them into a usable signal about whether a particle was an electron neutrino or something else >
Kai: Right. The core of it is the reconstruction pipeline they use, which involves clustering-based algorithms and multi-level identification steps to separate background from signal >
Mira: They’re highlighting that this framework works by determining shower axes without needing to tune parameters specifically for the energy of the shower, which is a big deal for flexibility >
Lev: So it’s about creating a general method that should be applicable across different energy scales at the LHC, which is what we need when scaling up detectors >
Kai: Precisely. They are showing how to use adaptive parameter selection based on local segment density during the reconstruction phase to handle those variations without prior knowledge of the shower energy >
Mira: That approach sounds flexible. It means that if you get a track with a very dense region locally, the algorithm adjusts its parameters automatically, instead of needing a specific tuning for that high-density situation >
Lev: But how much does that local density actually vary when you're looking at these forward showers? Is it stable enough to rely on this adaptation >
Kai: The paper doesn't detail the exact variation of local density across the whole volume, but they show that DBSCAN is applied independently to segments on each plate using their 2D spatial coordinates X and Y to group points in high-density regions > <ref:2606.18517#pg1>
Mira: So they’re relying on spatial clustering in a specific way, not on some energy-dependent tuning based on a calculated energy input for the shower >
Lev: That’s what I need to know. When we build real hardware, we need stability. If the clustering behavior changes drastically depending on the local environment, that makes things much harder to control >
Kai: They also use linear regression to determine the initial shower axis by fitting just the first three segments of each primary track independently in both Z-X and Z-Y projection planes >
Mira: That's a straightforward way to establish a starting point for the reconstruction, using just the very beginning of those tracks to define where they’re going >
Lev: So they don't need to wait for the whole shower to develop before they can start tracking its direction, which is good because it speeds things up >
Kai: They then define a preliminary cylindrical search volume around that initial axis, with a radius of one hundred µm and a length of eight cm >
Mira: That cylinder is where the next step happens: applying DBSCAN independently to segments on each plate using their X and Y coordinates to group points in high-density regions within that volume >
Lev: So they’re essentially creating localized groups of data based purely on how dense the points are, without needing an energy model to define what "dense" means >
Kai: That's the key feature they emphasize, which is that adaptive parameter selection is based on local segment density without requiring prior knowledge of the shower energy >
Mira: So, to summarize this section, they’re presenting a method for reconstructing shower axes and identifying them using a clustering algorithm that adapts locally to the data structure itself >
Lev: It sounds like they’ve solved one of the main hurdles in these emulsion experiments: getting robust geometry estimation without relying on complex energy modeling assumptions >
Kai: Exactly. It’s about making the reconstruction more self-sufficient when you don're dealing with a broad range of possible physics outcomes >
The paper's summary: Kai: Okay, so we’ve talked about the reconstruction method, now let’s look at what they actually found in terms of performance. This is about the results section of "Electromagnetic Shower Reconstruction and Identification in FASER's Emulsion Detector for LHC Forward Neutrino Measurements".
Mira: They are showing that their multi-level identification chain, which goes from track pre-selection to a cut-based selection and then the BDT classifier, yields very high background rejection rates.
Lev: What kind of numbers are we talking about here? Are we talking about something like ninety percent or ninety-five percent rejection?
Kai: They report combined background rejection rates of ninety-nine point nine nine percent at one hundred GeV and two hundred GeV, and then a slightly lower rate of ninety-nine point eight four percent at the higher energy > <ref:2606.18517#pg3>
Mira: That's extremely high, which is what you want when you are trying to distinguish genuine EM showers from the dominant muon background that mimics them in these detectors >
Lev: So they managed to keep that high rejection while still achieving decent signal efficiency, otherwise we wouldn't get much data to analyze later >
Kai: They also report the total reconstruction and identification efficiencies for simulated samples, showing fifty-eight point nine percent at one hundred GeV and seventy point eight percent at two hundred GeV >
Mira: So they’re saying that even with this high rejection, you still manage to pull out a significant fraction of the true signal that we care about >
Lev: And what about the energy measurement itself? How accurate are they when estimating the energy of these showers using just the segments?
Kai: They use the total number of segments across all plates in a reconstructed shower, Ntotal, as their estimator for calorimetric energy >
Mira: When they look at those numbers, relative biases are +zero point six percent at one hundred GeV and-zero point eight percent at two hundred GeV with resolutions of twenty-five point four percent and twenty-two point six percent, respectively >
Lev: That means the energy resolution is pretty good for a calorimetric estimate, but those biases are small enough that they’re not going to ruin our analysis significantly, right?
Kai: They also point out that systematic uncertainties on the reconstructed energy are dominated by single-film efficiency variations >
Mira: So it’s telling us where the detector imperfections are having the biggest impact on our energy estimates, which is good for understanding what to fix next >
The paper's improvements: Lev: Now that we know how they do it, let’s talk about what they suggest as improvements over previous work. What’s the actual upgrade path?
Kai: They refined the reconstruction algorithm by combining adaptive DBSCAN clustering, sequential centroid validation with a sixty µm deviation threshold, and Huber robust fitting to determine shower axes > <ref:2606.18517#pg3>
Mira: That combination of techniques is what allows them to get those reliable axes without relying on energy-dependent parameter tuning, which is a big methodological improvement >
Lev: So they’re essentially saying that you can get this robust geometric reconstruction using these specific mathematical tools instead of whatever complex model was used before >
Kai: They also mentioned that the ratio-based and angular variables are designed to remain stable across the broad FASERnu energy range, which is what enables a single trained classifier to be applied at fifty GeV and above without needing any retuning >
Mira: That's really practical. If you can have one classifier that works for both one hundred GeV and two hundred GeV, you save a ton of work on the analysis side > <ref:2606.18517#pg3>
Lev: It simplifies the downstream analysis significantly, but what about the limitations they explicitly state in this paper? Where does it stop working?
Kai: They do flag that their position resolution is evaluated with a track-extrapolation method for each film, and most plates show resolutions of zero point five to one point five µm >
Mira: And they also mention that some films get degraded up to about three µm because of things like variations in film alignment quality, emulsion distortions, and scanning conditions > <ref:2606.18517#pg1>
Lev: So the limitation isn't just the resolution itself; it’s the physical quality of the film setup which affects how well we can measure those positions >
Kai: And for angular resolution, they use a segment-difference method to evaluate track direction, and they note that this resolution is systematically larger in the horizontal projection in both modules because of the elliptical angular distribution of the test beam >
Mira: So to summarize these improvements, it’s about making the reconstruction more robust using adaptive clustering and robust fitting without needing energy-dependent tuning for axis determination >
Lev: It sounds like they’ve put together a solid set of tools for a broad energy range, but we still have to deal with the physical limitations of the emulsion itself >
Conclusion: Kai: So wrapping up on this paper, the main implication is that this detailed work establishes a validated framework for electron neutrino identification at the LHC using FASERnu data >
Mira: They’re essentially showing that their specific reconstruction and identification chain achieves background rejection rates of ninety-nine point nine nine percent at one hundred GeV and two hundred GeV > <ref:2606.18517#pg3>
Lev: That high level of rejection means we have a very clean way to search for the physics they are looking for in the forward region >
Kai: And they’ve shown that energy reconstruction using total reconstructed segments yields relative biases of +zero point six percent at one hundred GeV and-zero point eight percent at two hundred GeV >
Mira: So, overall, this work provides a validated pipeline for identifying these showers in the FASERnu detector for LHC forward neutrino measurements >
Lev: It’s a solid tool to use as we plan out the next phases of experimental design and data analysis based on what they’ve shown here >
Kai: This paper, "Electromagnetic Shower Reconstruction and Identification in FASER's Emulsion Detector for LHC Forward Neutrino Measurements", is a piece of work that shows how careful methodology can lead to solid results >
Mira: It validates the reconstruction and identification pipeline for electron neutrino identification at the LHC using test-beam data >
Lev: We’ll keep this as a useful reference when we start designing detectors that need to handle these types of challenges >
More episodes
- Daily Summary for 2026-11-19
- 2512.21290-Model-independent ZH production cross section at FCC-ee
- 2610.21982-First Observation of the Radiative Decay D 0 to gamma omega
- The day in conversation for 2026-11-19
- Daily Summary for 2026-11-19
- Daily Summary for 2026-11-18
- 2512.08065-Searches for Light Dark Matter and Evidence of Coherent Elastic Neutrino-Nucleus Scattering of Solar Neutrinos with the LUX-ZEPLIN (LZ) Experiment
- Daily Summary for 2026-11-18
- 2508.18022-Precision Measurements of the Electroweak Mixing Angle in the Region of the Z pole at the Large Hadron Collider
- 2512.23992-Prospect for measurement of CP-violating parameters of B s 0 to phi gamma at the Tera Z factory