Multi-approach Standard Model Effective Field Theory analyses of top-quark associated production in leptonic final states at sqrt s =13 TeV with the ATLAS detector

arXiv:2611.16347 · hep-ex · Submitted 2026-11-12 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: High Energy Physics: Experiment. The day in high-energy experiment: detectors, searches and limits.

Kai: I'm Kai.

Mira: And I'm Mira, here with Lev.

Kai: We're looking at the paper: "Multi-approach Standard Model Effective Field Theory analyses of top-quark associated production in leptonic final states at sqrt s =13 TeV with the ATLAS detector".

Mira: Here's the gist of the paper. The paper presents a study on Standard Model Effective Field Theory (SMEFT) interpretations of top-quark associated production processes in leptonic final states at sqrt s = 13 TeV, utilizing the full Run 2 proton–proton collision dataset from the ATLAS detector with an integrated luminosity of 140 fb-1.

Kai: The analysis focuses on a simultaneous likelihood fit across a wide range of final states sensitive to tt gamma bar, tZ nu bar, tW nu bar, tH nu bar, t tilde t tilde t bar t bar (assuming tt notation), and various other processes including tzq, WZ, WH, and THq production.

Mira: Two complementary analysis strategies are investigated: an Object-Based (OB) approach, which relies on generic event categorization based on counting reconstructed objects, and a Process-Based (PB) approach, which employs more complex orthogonal regions specifically optimized to identify individual processes.

Kai: Constraints are obtained on the Wilson coefficients of dimension-six SMEFT operators affecting top-quark interactions, encompassing top-boson, four-quark, and top-lepton operators, as well as complex operator contributions.

Paper summary: Kai: So, looking at the paper "Multi-approach Standard Model Effective Field Theory analyses of top-quark associated production in leptonic final states at sqrt s = thirteen TeV with the ATLAS detector", what's the big picture for us <ref:2611.16347#pg1,Multi-approach Standard Model Effective Field Theory analyses of top-quark associated>? It’s about using high energy collisions to test the Standard Model structure through precision measurements involving the top quark.

Mira: Essentially, they are showing how you can use a broad set of data from one experiment, like ATLAS at thirteen tera electron volts, to probe potential new physics effects by looking at the top quark and its associated particles in various final states.

Lev: It's important because it’s not just about finding new particles directly; deviations from the Standard Model predictions in these measurements can give us indirect evidence for new phenomena that we might not see elsewhere.

Kai: The paper highlights that how you structure your analysis matters a lot, showing the trade offs between generic object counting and more specialized process-based regions when fitting to data.

Mira: It underscores that even with a massive dataset like one hundred forty femtobarns, designing the right analytical strategy is crucial for extracting meaningful constraints on those dimension six operators.

Lev: The main implication for us in terms of real hardware or simulations is that you can't just run a single analysis pipeline; you need to be ready to compare how different methods handle those systematic uncertainties and what kind of statistical tension they generate.

Kai: So the authors are giving us tools—these two complementary strategies—to get a more complete picture of the top quark sector physics at these energies.

Mira: It’s about making sure we don't miss signals because we only look in one specific corner of the data space when searching for new physics beyond the Standard Model.

Conclusion: Kai: So, this paper is about taking data from thirteen tera electron collisions at the ATLAS detector and using it to test how new physics might affect how top quarks interact in certain final states.

Mira: Yeah, specifically looking at things like top quark plus a photon or a Z boson, and they're using that information to constrain these new ways the Standard Model could be modified.

Lev: From my side, I’m thinking about how much data you actually need to pull off these kinds of precision measurements on real hardware.

Kai: Well, the authors are showing two different ways to analyze the data—one based on just counting events in general regions and another one that tries to be super specific about identifying individual processes.

Mira: It seems like the process-based approach is generally stronger when you have a lot of different new physics operators to pin down.

Lev: That makes sense, but I wonder how much overhead you’re adding to your simulation when you go for those really complex orthogonal regions.

Kai: The paper shows that the process-based method gives better sensitivity for most of the operators, especially those affecting top quarks and their interactions with bosons or leptons.

Mira: But then they also point out that for some specific types of operators, like those involving top leptons, the object-based approach actually gives a better result by about fifteen to twenty percent.

Lev: So it’s a trade off—you get better overall coverage with the process approach but you lose sensitivity on certain sub-components with it.

Kai: Exactly. And after they fit all the data, the process approach starts showing more statistical tension for some of those specific operators, which means their confidence intervals look a bit wider in some cases compared to the object approach.

Mira: It shows that even when you have plenty of data from a large experiment like ATLAS, choosing your analytical tool is really important for what you actually learn about new physics.

Lev: So it's not just about the raw number of events; it’s about how well your method separates the signal from all those background noise sources.

Kai: It sets up a clear path for future work where we can use these two methods to double-check each other’s results and get a clearer picture of what might be going on at this energy scale.

The ATLAS Collaboration

EUROPEAN ORGANISATION FOR NUCLEAR RESEARCH (CERN)

hep-ex

Submitted: 2026-11-12

Updated: 2026-11-12

Comments: 105 pages in total, author list starting page 88, 26 figures, 25 tables, submitted to JHEP. All figures including auxiliary figures are available at https://atlas.web.cern.ch/Atlas/GROUPS/PHYSICS/PAPERS/TOPQ-2023-34/

License: http://creativecommons.org/licenses/by/4.0/

Importance score: 77/100

The gist: The paper presents a study on Standard Model Effective Field Theory (SMEFT) interpretations of top-quark associated production processes in leptonic final states at sqrt s = 13 TeV…

Key concepts

SMEFT
This is a theoretical framework used to search for physics beyond the Standard Model by adding higher-dimensional operators to existing Standard Model equations. These operators describe potential new interactions involving particles like the top quark, allowing physicists to quantify deviations from known physics.
Object-Based (OB) Approach
This analysis strategy categorizes events based on generic features, such as counting specific reconstructed objects like jets or leptons. It is a simpler method for grouping data but might miss subtle differences between closely related physical processes.
Process-Based (PB) Approach
This more complex strategy uses highly optimized, orthogonal regions specifically designed to isolate and identify individual production processes, such as $tZar{ u}$ versus $ttar{t}ar{t}$. This method is better at separating distinct physical signals but requires more sophisticated modeling.
Wilson Coefficients (WC)
These are the numerical parameters that quantify the strength of new physics interactions described by SMEFT operators. By fitting data to these coefficients, researchers determine whether new physics effects are present and how strong they might be.

Terminology

Summary

The paper presents a study on Standard Model Effective Field Theory (SMEFT) interpretations of top-quark associated production processes in leptonic final states at sqrt s = 13 TeV, utilizing the full Run 2 proton–proton collision dataset from the ATLAS detector with an integrated luminosity of 140 fb-1. p. 0

Where the paper says it

EUROPEAN ORGANISATION FOR NUCLEAR RESEARCH (CERN) Submitted to: JHEP CERN-EP-2026-270 13th November 2026 Multi-approach Standard Model Effective Field Theory analyses of top-quark associated production in leptonic final states at √ 𝒔 = 13 TeV with the ATLAS detector The ATLAS Collaboration Standard Model Effective Field Theory (SMEFT) interpretations of measurements of top-quark associated production processes in leptonic final states are presented using the full Run 2 proton–proton collision dataset recorded by the ATLAS detector at the Large Hadron Collider at √ 𝑠 = 13 TeV, corresponding to an integrated luminosity of 140 fb−1 . A simultaneous likelihood fit is performed across final states sensitive to 𝑡𝑡𝛾¯ , 𝑡𝑡𝑍¯ , 𝑡𝑡𝑊¯ , 𝑡𝑡𝐻¯ , 𝑡𝑡𝑡¯ 𝑡¯, 𝑡𝑍𝑞, 𝑡𝑊 𝑍, 𝑡𝐻𝑞, and 𝑡𝐻𝑊 production, with harmonised reconstructed final-state objects and a coherent treatment of detector-level SMEFT effects across all contributing processes.

The analysis focuses on a simultaneous likelihood fit across a wide range of final states sensitive to tt gamma bar, tZ nu bar, tW nu bar, tH nu bar, t tilde t tilde t bar t bar (assuming tt notation), and various other processes including tzq, WZ, WH, and THq production. p. 0
Where the paper says it

A simultaneous likelihood fit is performed across final states sensitive to 𝑡𝑡𝛾¯ , 𝑡𝑡𝑍¯ , 𝑡𝑡𝑊¯ , 𝑡𝑡𝐻¯ , 𝑡𝑡𝑡¯ 𝑡¯, 𝑡𝑍𝑞, 𝑡𝑊 𝑍, 𝑡𝐻𝑞, and 𝑡𝐻𝑊 production, with harmonised reconstructed final-state objects and a coherent treatment of detector-level SMEFT effects across all contributing processes. Two complementary analysis strategies are investigated: an approach employing a more generic event categorisation based on counting reconstructed objects, and a more complex approach combining orthogonal regions optimised to specifically identify individual processes, as employed by previous dedicated measurements.

Two complementary analysis strategies are investigated: an Object-Based (OB) approach, which relies on generic event categorization based on counting reconstructed objects, and a Process-Based (PB) approach, which employs more complex orthogonal regions specifically optimized to identify individual processes. p. 0

Where the paper says it

A simultaneous likelihood fit is performed across final states sensitive to 𝑡𝑡𝛾¯ , 𝑡𝑡𝑍¯ , 𝑡𝑡𝑊¯ , 𝑡𝑡𝐻¯ , 𝑡𝑡𝑡¯ 𝑡¯, 𝑡𝑍𝑞, 𝑡𝑊 𝑍, 𝑡𝐻𝑞, and 𝑡𝐻𝑊 production, with harmonised reconstructed final-state objects and a coherent treatment of detector-level SMEFT effects across all contributing processes. Two complementary analysis strategies are investigated: an approach employing a more generic event categorisation based on counting reconstructed objects, and a more complex approach combining orthogonal regions optimised to specifically identify individual processes, as employed by previous dedicated measurements.

Constraints are obtained on the Wilson coefficients of dimension-six SMEFT operators affecting top-quark interactions, encompassing top-boson, four-quark, and top-lepton operators, as well as complex operator contributions. p. 0
Where the paper says it

Two complementary analysis strategies are investigated: an approach employing a more generic event categorisation based on counting reconstructed objects, and a more complex approach combining orthogonal regions optimised to specifically identify individual processes, as employed by previous dedicated measurements. Constraints are obtained on the Wilson coefficients of dimensionsix SMEFT operators affecting top-quark interactions, including top-boson, four-quark and top-lepton operators, together with complex operator contributions.

The comparison between the two strategies yields crucial insights into designing increasingly sophisticated SMEFT interpretations. p. 0

Where the paper says it

The results do not show a significant deviation from the Standard Model expectation and 95% confidence interval limits are placed in a simultaneous fit to 33 SMEFT Wilson coefficients. The comparison of the two analysis strategies provides new insight into the design of increasingly complex SMEFT interpretations.

The results indicate that for a large number of operators, the process-based approach is superior. p. 2
Where the paper says it

2 PB approach region definitions 62 C. 3 Common control region definitions 67 D Pre-fit distributions 68 E Expected results for WC sensitivity 76 1 Introduction The Large Hadron Collider (LHC) [1] enables an extensive programme of direct searches for physics beyond the Standard Model (BSM), exploiting its unprecedented energy reach.

Specifically:

  • The PB approach shows better expected sensitivity to the majority of Wilson coefficients.

  • The largest gains, up to a 40% reduction in the 95% confidence interval, are observed for four-heavy-quark operators and top-boson operators whose effects primarily manifest as normalization changes in tZ nu bar, tH nu bar, and tZq, reflecting improved process separation.

  • For top-lepton operators, the OB approach proves stronger by 15% - 20%.

  • After fitting to data, the advantage of the PB approach is diluted, as it is better for 16 out of 33 Wilson coefficients. Furthermore, the PB approach exhibits more statistical tensions and a mild preference for non-zero WC values, leading to worse 95% confidence level intervals compared to the OB approach in some instances.

The methodology involves defining signal regions using criteria such as the presence of a photon, lepton pairs consistent with an on-shell Z boson, and other specific final state requirements. p. 8

Where the paper says it

This is based on building selections from the counting of reconstructed objects and their properties that roughly separate the data into signal regions with different final states. These features include lepton, jet, 𝑏-tagged jet and photon multiplicities, lepton charges and invariant masses of the charged leptons.

Reconstructed objects include electrons, muons, jets (using anti- k t algorithm), photons (with tight identification criteria), and missing transverse momentum. p. 2
Where the paper says it

5 Photons 59 B. 6 Missing transverse momentum 59 B.

Systematic uncertainties are applied rigorously across different processes, including uncertainties in parton shower/hadronization models, initial-state radiation modeling, theory uncertainties in QCD and EW production generators (ME+PS uncertainty), shape-only uncertainties, and PDF set variations. p. 3
Where the paper says it

These challenges are addressed here by harmonisation of object definitions, orthogonal event categories and correlation of systematic uncertainties including theory modelling. Additionally, consistent parameterisations of the dependence on the dimension-six WCs across the relevant processes are applied including for processes which act as backgrounds to one another.

The analysis relies on NLO/NNLO calculations and Monte Carlo generators such as MadGraph5_aMC@NLO v2.6.2 for tt t bar t bar modeling, and Sherpa 2.2.2 for diboson simulations, using PDF sets like NNPDF3.1nlo or NNPDF3.0nnlo depending on the process simulated. p. 6
Where the paper says it

The 𝑡𝑡𝑊¯ process is also separated, with the bulk 𝑡𝑡𝑊¯ (QCD) contribution isolated from the 𝑡𝑡𝑊 𝑗 ¯ EW contribution (which arises in NLO corrections at order 𝛼 3𝛼𝑠) due to the complementary sensitivity to different EFT operators from each, as done in ATL-𝑡𝑡𝑊 𝑗 ¯ EW [13]. The details of how these processes are defined and simulated are described in Appendix A.

The comparison between OB and PB approaches demonstrates that while the PB approach is generally stronger in terms of expected sensitivity, it also exposes subtleties regarding its application and can lead to more tension in data fits for certain operators.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Improved sensitivity to Wilson coefficients by employing a more complex analysis strategy, specifically combining orthogonal regions optimized to specifically identify individual processes as employed by previous dedicated measurements.

  2. Enhanced constraint on top-boson operators by utilizing the process-based approach, which can exploit the discriminating power developed in dedicated analyses to enhance the separation between individual top+X processes and improve the sensitivity to a number of EFT operators.

  3. Better discrimination between specific four-quark operators by using the process-based approach, as it is able to better separate out the effects of all three four-heavy-quark operators at once, since their impact, while similar, grows differently with energy.

  4. Tighter constraints on top-boson and top-lepton operators in the process-based approach compared to the object-based approach for specific coefficients like Re(ctH) and Im(ctH).

  5. Improved coverage properties of confidence intervals by utilizing a multi-operator fit which allows for a coherent treatment of processes that share common final states and are simultaneously sensitive to many of the same EFT operators.

Abstract

Standard Model Effective Field Theory (SMEFT) interpretations of measurements of top-quark associated production processes in leptonic final states are presented using the full Run 2 proton-proton collision dataset recorded by the ATLAS detector at the Large Hadron Collider at sqrt s =13 TeV, corresponding to an integrated luminosity of 140 fb-1. A simultaneous likelihood fit is performed across final states sensitive to t t barγ, t t barZ, t t barW, t t barH, t t bart t bar, tZq, tWZ, tHq, and tHW production, with harmonised reconstructed final-state objects and a coherent treatment of detector-level SMEFT effects across all contributing processes. Two complementary analysis strategies are investigated: an approach employing a more generic event categorisation based on counting reconstructed objects, and a more complex approach combining orthogonal regions optimised to specifically identify individual processes, as employed by previous dedicated measurements. Constraints are obtained on the Wilson coefficients of dimension-six SMEFT operators affecting top-quark interactions, including top-boson, four-quark and top-lepton operators, together with complex operator contributions. The results do not show a significant deviation from the Standard Model expectation and 95% confidence interval limits are placed in a simultaneous fit to 33 SMEFT Wilson coefficients. The comparison of the two analysis strategies provides new insight into the design of increasingly complex SMEFT interpretations. The second, more complex, approach targeting individual processes results in the best sensitivity to the majority of Wilson coefficients.

Sources

Related papers