Projected sensitivity of the ANUBUIS detector to tau-coupled Heavy Neutral Leptons
Listen
Radio episode about this paper
Transcript
Introduction to the show: ident: High Energy Physics: Experiment. The day in high-energy experiment: detectors, searches and limits.
Kai: We're looking at the paper: "Projected sensitivity of the ANUBUIS detector to tau-coupled Heavy Neutral Leptons".
Mira: Here's the gist of the paper. Heavy Neutral Leptons (HNLs) provide a minimal and well-motivated extension of the Standard Model neutrino sector, and are naturally long-lived for small mixing angles between SM neutrinos and HNLs The present article extends that work to the complementary BC8 scenario, in which the HNL couples exclusively to the tau lepton As the tau lepton is itself unstable and because charged-current HNL decay modes become available only above the kinematic tau lepton production threshold, the production, decay and event-selection characteristics of this scenario cannot be obtained by rescaling the electron- or muon-coupled results in flavour The analysis is carried out end to end, from signal-sample generation through acceptance evaluation to sensitivity extraction, with the released SET-ANUBIS v1.0.0 framework.
Kai: Tau-Coupled HNL Benchmark The model considered here is the same minimal Majorana HNL scenario used in Ref.
9: A single righthanded neutral fermion, N1, is added to the SM and interacts only through its mixing with the SM neutrinos For the BC8 benchmark, the flavour structure is fixed to V1e: V1µ: V1τ = 0: 0: 1 This leaves the HNL mass, mN1, and the mixing magnitude, V1τ squared, as the two free parameters of the phenomenological study.
Kai: The direct electroweak production modes retained from the previous study are qq¯' → W∗± → N1τ±: CCDY, qq¯ → Z∗ → N1ντ /ν¯τ: NCDY, and qγ → q' τ±N1: W γ fusion.
Paper summary: Mira: To summarize this paper, they are extending the previous sensitivity projections for single electron or muon coupled heavy neutral leptons over to the complementary BC8 scenario where the HNL couples exclusively to the tau lepton.
Kai: The central thesis is that because we can't just scale up results from electron or muon couplings, we have to treat this tau-coupled case separately because of the unstable nature of the tau lepton and its resulting decay modes.
Lev: They focus on a specific model where a single righthanded neutral fermion N1 is added to the Standard Model, interacting only through its mixing with SM neutrinos for this benchmark scenario.
Mira: For this BC8 benchmark, they fix that flavour structure to zero, zero, and one for electron, muon, and tau couplings respectively. This leaves the two free parameters that drive the whole study: the mass of N1 and the square of the tau mixing magnitude term.
Kai: The analysis is structured end to end using a framework called SET-ANUBIS version one point zero.zero which handles everything from generating signal events for proton-proton collisions at one hundred forty teraelectron volts to extracting the final sensitivity contours <ref:2611.14170#pg1>.
Lev: The workflow they describe involves several steps: model configuration, generator steering, handling HepMC events, particle propagation through the decay volume, kinematic selections based on tau lepton thresholds, and finally aggregating the acceptance data to get that sensitivity extraction.
Mira: They generate signal events using MG5 aMC@NLO three point five four with the NN23LO one PDF set and the SM HeavyN NLO UFO implementation, focusing on production channels like quark-quark annihilation into a W boson, quark annihilation into a Z boson, and W gamma fusion.
Kai: When it comes to HNL decays, they use MadSpin followed by parton showering and hadronization with Pythia eight for the unstable particle decays. They make sure to assign zero weight automatically to those kinematically forbidden on-shell tau lepton decay modes that aren't allowed at a given mass.
Lev: What this means for us in terms of execution is that they are accounting for the fact that as N1's mass changes, the available decay channels around mN1 equal to mtau shift rapidly, which impacts both the proper lifetime and the branching fraction.
Mira: It highlights how important it is to model these threshold effects when calculating anything related to HNL production or decay rates in a realistic detector setup.
Kai: So, for this segment, we see they are setting up the simulation infrastructure and defining exactly what physical processes they are modeling for this tau-coupled case. Next up, we'll look at what the actual projected sensitivity numbers look like.
Conclusion: Mira: Looking at the title "Projected sensitivity of the ANUBUIS detector to tau-coupled Heavy Neutral Leptons," it really emphasizes that this work is specifically about how well ANUBUIS can probe this unique coupling channel compared to what they've done before.
Kai: I think the implication here is that we are now getting a concrete picture of the limits of what this specific detector configuration can tell us about physics beyond the Standard Model involving tau leptons.
Lev: What it means simply is that they are providing a projected sensitivity curve based on their analysis, showing where ANUBUIS can realistically look for evidence of this tau-coupled heavy neutral lepton across different mass and mixing values.
Mira: The authors are extending the previous study to provide this complementary view, meaning we get a more complete picture of the search space for these new physics scenarios.
Kai: So, the main point is that they have moved from looking at simpler couplings to tackling a more complex scenario with direct tau coupling and provided a robust framework for that analysis.
Lev: The limitation they state is that charged-current HNL decay modes only become accessible above their kinematic thresholds, which means the visible branching fraction and lifetime calculations are highly dependent on where N1 sits in relation to the tau mass.
Mira: That’s a fair caveat; it tells us that if we push our search into regions where N1 is close to mtau, we need those specific threshold calculations because the physics changes so quickly there.
Kai: So, this paper provides the projected limits for this specific setup and shows exactly what kind of data you might expect to see if such a heavy neutral lepton exists and couples only to the tau.
Camilia Ben Messaouda, Théeo Reymermier, Paul Swallow, Oleg Brandt
Université Lyon 1 · Cavendish Laboratory, University of Cambridge
hep-ex, hep-ph
Submitted: 2026-11-10
Updated: 2026-11-10
Comments: 7 pages, 6 figures
License: http://creativecommons.org/licenses/by-nc-nd/4.0/
Importance score: 93/100
The gist: Heavy Neutral Leptons (HNLs) provide a minimal and well-motivated extension of the Standard Model neutrino sector…
Key concepts
- Heavy Neutral Leptons (HNLs)
- These are hypothetical, very heavy particles that are extensions of the Standard Model neutrino sector. They are Majorana fermions, meaning they are their own antiparticles. In this specific study, one HNL couples only to the tau lepton.
- BC8 Scenario
- This is a specific benchmark model used in the study where the HNL couples exclusively to the tau lepton. This coupling structure is chosen because it allows for unique production and decay signatures compared to models where HNLs couple to electrons or muons.
- SET-ANUBIS Framework
- This is a modular software tool used to simulate physics events in particle detectors. It handles everything from generating the initial collision data (signal generation) through tracking how particles move and decay inside the detector, allowing researchers to evaluate sensitivity.
Terminology
Summary
Heavy Neutral Leptons (HNLs) provide a minimal and well-motivated extension of the Standard Model neutrino sector, and are naturally long-lived for small mixing angles between SM neutrinos and HNLs The present article extends that work to the complementary BC8 scenario, in which the HNL couples exclusively to the tau lepton As the tau lepton is itself unstable and because charged-current HNL decay modes become available only above the kinematic tau lepton production threshold, the production, decay and event-selection characteristics of this scenario cannot be obtained by rescaling the electron- or muon-coupled results in flavour The analysis is carried out end to end, from signal-sample generation through acceptance evaluation to sensitivity extraction, with the released SET-ANUBIS v1. p. 0 As the tau lepton is itself unstable and because charged-current HNL decay modes become available
only above the kinematic tau lepton production threshold, the production, decay and event-selection
characteristics of this scenario cannot be obtained by rescaling the electron- or muon-coupled results
in flavour. The analysis is carried out end to end, from signal-sample generation through acceptance
evaluation to sensitivity extraction, with the released SET-ANUBIS v1. The analysis is carried out end to end, from signal-sample generation through acceptance
evaluation to sensitivity extraction, with the released SET-ANUBIS v1. 0 framework.Where the paper says it
Where the paper says it
Tau-Coupled HNL Benchmark
The model considered here is the same minimal Majorana HNL scenario used in Ref. [9] A single righthanded neutral fermion, N1, is added to the SM and interacts only through its mixing with the SM neutrinos For the BC8 benchmark, the flavour structure is fixed to V1e: V1µ: V1τ = 0: 0: 1 This leaves the HNL mass, mN1, and the mixing magnitude, V1τ squared, as the two free parameters of the phenomenological study. p. 1 The complete model definition, including the relation between the Yukawa coupling, the mass eigenstates
and the mixing between SM neutrinos and HNLs is given
in Ref. For the BC8 benchmark, the flavour structure is fixed
to
|V1e| : |V1µ| : |V1τ | = 0 : 0 : 1, (3)
leaving the HNL mass, mN1
, and the mixing magnitude,
|V1τ |
2
, as the two free parameters of the phenomenological study.Where the paper says it
Analysis Workflow
SET-ANUBIS is a modular framework for simulating LLP models in ANUBIS and for evaluating the corresponding acceptances and sensitivities Version 1.0.0 is used here for the complete BC8 workflow. p. 2 ANALYSIS WITH SET-ANUBIS
SET-ANUBIS is a modular framework for simulating LLP models in ANUBIS and for evaluating the
corresponding acceptances and sensitivities [13]. 0 is used here for the complete BC8 workflow. Model configuration, generator steering, HepMC event
handling [14], particle propagation through the decayvolume, kinematic selections, acceptance aggregation,
and sensitivity-contour extraction are all executed within
the same released pipeline. SET-ANUBIS was validated
in the BC6 and BC7 study[9], when parts of its architecture were still evolving; this is the first analysis to use
the released v1.Where the paper says it
Where the paper says it
Signal Generation
Signal events are generated for pp collisions at √s = 14 TeV using MG5 aMC@NLO 3.5.4 [15] with the NN23LO1 PDF set [16] and the SM HeavyN NLO UFO implementation. p. 2 Signal generation
Signal events are generated for pp collisions at
√
s = 14 TeV using MG5 aMC@NLO 3. 4 [15] with the
NN23LO1 PDF set [16] and the SM HeavyN NLO
UFO implementation [17–19]. 4 [15] with the
NN23LO1 PDF set [16] and the SM HeavyN NLO
UFO implementation [17–19]. The production channels
are CCDY, NCDY, and W γ fusion, as defined in Section II. The production channels
are CCDY, NCDY, and W γ fusion, as defined in Section II. HNL decays are handled with MadSpin [20], followed by parton showering, hadronisation, and unstableparticle decays with Pythia8 [21]. Tau lepton decays in
particular are simulated explicitly, so that the charged
particles and neutrinos entering the ANUBIS selection
are those of the complete final state rather than of an
undecayed tau lepton object. Samples are organised by HNL production and decay
mode. The contribution of each category is reconstructed
from the corresponding production cross-section, HNL
branching fraction, and acceptance. This treatment automatically assigns zero weight to kinematically forbidden on-shell-tau lepton decay modes and accounts for
the change in the total HNL width across the tau lepton
threshold.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.
Improvements for AI systems
-
Improved model handling for tau-coupled HNLs allows event generation to automatically assign zero weight to kinematically forbidden on-shell tau lepton decay modes and accounts for the change in total HNL width across the tau lepton threshold, avoiding
the assumption of flavour universality for the acceptance and the application of a posteriori rescaling factors to the BC6 or BC7 samples.
-
Enhanced event selection for BC8 incorporates explicit simulation of prompt tau lepton decays, ensuring that
the ANUBIS charged-track requirement is evaluated on the stable charged daughters of that tau,
which provides aprincipal detector-level distinction from a direct e/µ → τ substitution in the previous analysis.
-
The SET-ANUBIS framework can be used to perform an end to end workflow, including
model configuration, generator steering, HepMC event handling [14], particle propagation through the decayvolume, kinematic selections, acceptance aggregation, and sensitivity-contour extraction
for all benchmarks. -
The system can project exclusion sensitivities in a parameter space defined by (mN1, V1tau 2) for the BC8 scenario with a best sensitivity of
V1tau squared = 2.5 × 10−8 at mN1 = 6.2 GeV,
which isunique among the proposed experiments considered here for mN1 ≳ 4 GeV.
Abstract
Heavy Neutral Leptons (HNLs) provide a minimal and well-motivated extension of the Standard Model neutrino sector, and are naturally long-lived for small mixing angles between SM neutrinos and HNLs. A previous ANUBIS study determined the projected sensitivity to a single Majorana HNL coupled exclusively to the electron or to the muon, corresponding to the BC6 and BC7 benchmark scenarios of the Physics Beyond Colliders initiative. The present article extends that work to the complementary BC8 scenario, in which the HNL couples exclusively to the tau lepton. As the tau lepton is itself unstable and because charged-current HNL decay modes become available only above the kinematic tau lepton production threshold, the production, decay and event-selection characteristics of this scenario cannot be obtained by rescaling the electron- or muon-coupled results in flavour. The analysis is carried out end to end, from signal-sample generation through acceptance evaluation to sensitivity extraction, with the released SET-ANUBIS v1.0.0 framework.
Sources
- Expression of Interest for the CODEX-b Detector
- FASER's Physics Reach for Long-Lived Particles
- An Update to the Letter of Intent for MATHUSLA: Search for Long-Lived Particles at the HL-LHC
- Sensitivity of the SHiP experiment to Heavy Neutral Leptons
- Proposing GRENDEL: GalleRy ExperimeNt for Decays of Exotic LLPs at the LHC
- The Present and Future Status of Heavy Neutral Leptons
- Feebly Interacting Particles: FIPs 2022 workshop report
- Phenomenology of GeV-scale Heavy Neutral Leptons
- Origins of Hidden Sector Dark Matter II: Collider Physics
- Asymmetric Dark Matter: Theories, Signatures, and Constraints
- Baryonecrosis: Displaced Vertices from $R$-Parity Violation
- ANUBIS: Proposal to search for long-lived neutral particles in CERN service shafts
- Projected sensitivity of the ANUBIS detector to heavy neutral leptons
- Physics Beyond Colliders at CERN: Beyond the Standard Model Working Group Report
- The HepMC3 Event Record Library for Monte Carlo Event Generators
- The automated computation of tree-level and next-to-leading order differential cross sections, and their matching to parton shower simulations
- Parton distributions with QED corrections
- A quantitative study on helicity inversion in Majorana neutrino decays at the LHC
- Heavy Majorana Neutrinos from $W\gamma$ Fusion at Hadron Colliders
- Fully-Automated Precision Predictions for Heavy Neutrino Production Mechanisms at Hadron Colliders
Related papers
- DrSai: an agentic AI system toward autonomous physics analysis workflows at BESIII
- CANTON- mu Proposal: A Next-Generation Muon g-2 Measurement at Sub-0.1 ppm Precision
- Search for dark photon dark matter near 1,meV using a superconducting mixer
- ANUBIS detector and its sensitivity to neutral long-lived particles
- How to scale your HEP ML models: A recipe for robust architecture comparisons at scale
- Search for the 16 O(ppp) to 13 C pi+ pi+ e+ Decay Mode in Super-Kamiokande Using Machine Learning Techniques