Extending indoor airborne infection risk modelling to 3D, with local surface deposition
Listen
Radio episode about this paper
Transcript
Introduction to the show: ident: Genomics Radio. Generated commentary on the latest computational biology and genomics papers.
Ines: We're looking at the paper: "Quantifying the impact of 3D diffusion and local versus global removal by surface deposition on indoor airborne transmission".
Marcus: Here's the gist of the paper. The study extends the Viral Infection Risk Indoor Simulator (VIRIS) by modeling airborne transmission in three dimensions and replacing global removal with a local surface deposition condition to provide a more realistic assessment of infection risk and transmission rates Model Extensions The authors developed VIRIS-3D-L by extending the airborne transmission model in VIRIS (a reaction–diffusion equation) to three dimensions (3D) and replacing global removal with a Robin boundary condition representing localised removal due to surface deposition.
Ines: This extension addresses limitations in the original VIRIS model where the 2D formulation leads to underestimation of aerosol concentrations at individuals’ mouth level and cannot represent variations in aerosol transport due to differences in people and furniture heights.
Marcus: Specifically, they represented each agent as a point source or sink at a height of 1.8m, with (x, y) coordinates following the agent trajectory.
Ines: Furthermore, they removed the first-order global removal term, γ, from Eq.
Paper summary: Ines: To wrap up this work on "Quantifying the impact of three dee diffusion and local versus global removal by surface deposition on indoor airborne transmission," it's clear that moving from a two-dimensional model to a three-dimensional one with localized surface deposition is fundamentally changing the output <ref:2611.13372#pg1,Quantifying the impact of 3D diffusion and local versus global removal by>.
Marcus: The authors are showing that this extension addresses key limitations in how we used to calculate infection risk, specifically concerning the spatial variation of aerosols and concentrations at different heights within an indoor space >
Yuki: It seems like the biggest implication for us in population genetics and public health is that if our models don't account for vertical gradients, we're missing a lot about where people are actually getting infected in a building >
Ines: Right. And the authors conclude that VIRIS-three dee-L is preferable for prediction and assessment because it predicts higher breathing zone concentrations and greater spatial variation in risk > <ref:2611.13372#pg1>
Marcus: They also admit that while this model is more accurate, they acknowledge that the simulation time increases significantly, which means there's a trade-off between accuracy and speed >
Yuki: So what's the final word on this paper? It’s about using more complex physics to get a better picture of transmission dynamics in indoor settings >
Ines: Exactly. And they recommend VIRIS-three dee-L for infection risk prediction and intervention assessment, especially in situations with varying people and furniture heights or frequent movement > <ref:2611.13372#pg1>
Marcus: They suggest that VIRIS remains useful for rapid screening of simple single-storey buildings when lower computational cost is essential >
Conclusion: Ines: So we've been digging into how changing the model to three dimensions and focusing on surface removal actually shifts the numbers for infection risk in indoor settings, and now we're getting to what this paper is actually trying to tell us about that whole process.
Marcus: They’re looking at this model called VIRIS-three dee-L, which takes a 2D thing and makes it three dimensions, so they can see how aerosols move up and down in the space > <ref:2611.13372#pg1>
Yuki: I think what's interesting here is how they change the removal part. Instead of just removing all the germs globally at once, they make it local surface deposition, which is much more realistic for real life >
Ines: Exactly. It changes the math from a simple removal term to something that depends on where you are physically located in relation to surfaces >
Marcus: And they used this new model across three different buildings—a courtroom, a care home, and a supermarket—to see how much more accurate it is compared to the older VIRIS version >
Yuki: The results show that the old model really underestimates the actual risk by up to fifty percent in all those buildings >
Ines: That underestimation comes from assuming uniform aerosol concentrations everywhere, which isn't true when you have different people and furniture heights >
Marcus: And they used a statistical test, a Wilcoxon signed-rank test, and it confirmed that this systematic underestimation is real across all three building types >
Yuki: So what does this mean for us? It means if we only use the simpler model, we're severely miscalculating how dangerous certain indoor spaces are for transmission >
Ines: It tells us that when planning interventions, you need a model that captures that vertical movement and those surface effects to get a better picture of where risk is actually highest >
Marcus: But they also noted the trade-off. This more realistic model takes about four times the computation time compared to the original one, which is something we have to consider when we're trying to run these simulations frequently >
Yuki: Yeah, so while this new model gives us a much better picture of risk in terms of spatial variation, we still have that computational hurdle when we try to apply it widely across many different scenarios >
Cardiff University
q-bio.PE, math.DS, stat.OT
Submitted: 2026-11-09
Updated: 2026-11-13
License: http://creativecommons.org/licenses/by/4.0/
Importance score: 92/100
The gist: The study extends the Viral Infection Risk Indoor Simulator (VIRIS) by modeling airborne transmission in three dimensions and replacing global removal with a local surface deposition condition to…
Key concepts
- VIRIS-3D-L
- This is an extended version of the original VIRIS model. It incorporates three dimensions (3D) and replaces global removal with a local surface deposition condition. This aims to create a more realistic simulation of airborne disease spread by accounting for spatial variations in air movement and removal.
- Three-Dimensional Modeling
- Instead of treating the environment as flat (2D), this approach models the indoor space in three dimensions. This allows the simulation to accurately capture how aerosols move and concentrate at different heights, which is crucial because aerosol concentration varies depending on where people and furniture are located.
- Local Surface Deposition
- This replaces the original model's global removal term with a condition that simulates local removal due to surfaces. This means aerosols are removed from the air specifically when they come into contact with surfaces, providing a more physically realistic way to account for how airborne particles are cleared from an indoor environment.
Terminology
Summary
The study extends the Viral Infection Risk Indoor Simulator (VIRIS) by modeling airborne transmission in three dimensions and replacing global removal with a local surface deposition condition to provide a more realistic assessment of infection risk and transmission rates
Model Extensions
The authors developed VIRIS-3D-L by extending the airborne transmission model in VIRIS (a reaction–diffusion equation) to three dimensions (3D) and replacing global removal with a Robin boundary condition representing localised removal due to surface deposition. This extension addresses limitations in the original VIRIS model where the 2D formulation leads to underestimation of aerosol concentrations at individuals’ mouth level and cannot represent variations in aerosol transport due to differences in people and furniture heights. p. 1 Consequently, the 2D formulation leads to underestimation of
aerosol concentrations at individuals’ mouth level and cannot represent variations in aerosol transport
due to differences in people and furniture heights. These limitations affect predicted spatial transmission
dynamics and individual infection risks. 2)
where 𝜂𝑖
is the mask efficiency of the 𝑖
th agent, ℎ is the room height, 𝐴𝑖
is aerosol emission rate of the
𝑖
th agent, 𝐹𝑣 is fraction of viral-laden aerosols, and 𝛿 is the Dirac Delta function representing a point
source. The sink due to inhalation by all the agents 𝑛 in an indoor space, 𝑅(x, 𝑡) is defined as,
𝑅(x, 𝑡) =
∑︁𝑛
𝑖=1
(1 − 𝜂𝑖)𝜌𝑖𝛿(x − xi(𝑡)), (2. First, we represent each agent as a point source or sink at a height of 1. 8m, with (𝑥, 𝑦) coordinates
following the agent trajectory. Further, in VIRIS, surface deposition of aerosols is represented as a first-order global removal term
in the reaction-diffusion equation, as in several airborne transmission models [15, 17, 11]. In reality,
aerosols deposited on surfaces such as walls, ceilings, floors, furniture, or other solid objects are required
to be removed from the domain rather than homogeneously throughout the domain. : Computation time in minutes for three single-storey buildings using the VIRIS, and VIRIS-3D-L modelling frameworks. Conclusion
In this paper, we extended VIRIS [30] by addressing its two assumptions: first, modelling airborne
transmission using a reaction–diffusion equation in a 3D domain instead of a 2D domain, and second,
replacing the global surface-deposition sink term with a Robin boundary condition representing local
aerosol removal at surfaces (VIRIS-3D-L framework).Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Comparative Results Across Buildings
The comparison of VIRIS and VIRIS-3D-L was conducted across three single-storey buildings: a courtroom, a care home, and a supermarket. The findings indicated that VIRIS underestimates the disease transmission rate and infection risks for individuals by up to 50% relative to VIRIS-3D-L in all three buildings. p. 0 We compare VIRIS and VIRIS-3D-L across three single-storey buildings with
increasing architectural and people-movement complexity: a courtroom, a care home, and a supermarket. We find
that VIRIS underestimates the disease transmission rate and infection risks for individuals by up to 50% relative
to VIRIS-3D-L in all three buildings. In Sections 3. 2, respectively, we compare the infection
risk predictions and computation times of VIRIS and VIRIS-3D-L for three single-storey buildings with
increasing architectural and people movement complexity: a courtroom, a care home, and a supermarket. Next, we describe
the VIRIS-3D-L framework. We refer to individuals as ‘agents’ in this paper; their behaviour is modelled
using an agent-based model [30], and remains the same for VIRIS-3D-L. For example, at the end of the simulation, the infection risk for 𝑃3 and 𝑃5 is
0. 5 using VIRIS and 0. Further, VIRIS significantly underestimates individuals’ infection risk by 8% to 28%
relative to VIRIS-3D-L. For example, at the end of the simulation, the infection risk for 𝑃3 and 𝑃5 is
0.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Statistical Validation
The statistical comparison using the one-sided Wilcoxon signed-rank test revealed that VIRIS significantly underestimates infection risk compared to VIRIS-3D-L for all three buildings. Hypothesis 3, which states that VIRIS underestimates, was supported by p-values below 0. p. 3 (𝑥𝑖(𝑡), 𝑦𝑖(𝑡), 1. Although we could use a custom height for each agent by providing the respective
values as input to the agent-based model in VIRIS, we fix all heights to be equal for simplicity. in three spatial dimensions, resulting in vertical concentration gradients and higher concentrations of
infectious aerosols in the breathing zone. Consequently, the 2D formulation leads to underestimation of
aerosol concentrations at individuals’ mouth level and cannot represent variations in aerosol transport
due to differences in people and furniture heights. This would overestimate safe exposure durations
and lead to interventions that are insufficient to reduce infection risk during an outbreak. These differences arise because VIRIS assumes uniform aerosol concentrations over the building
height and applies surface-deposition removal throughout the domain, including the breathing zone,Where the paper says it
Where the paper says it
Where the paper says it
Computational Trade-offs
While VIRIS-3D-L provides a more realistic modelling of airborne transmission than VIRIS, it requires, on average, four times the computation time of VIRIS mainly because it extends the computational domain from a 2D surface to a 3D volume. The simulation time increases significantly depending on the building complexity; for example, total computation time increased by six minutes for the courtroom and 14 minutes for the care home. p. 8 1) takes longer in a 3D domain than in a 2D domain (Table
4 in Appendix D). Specifically, total computation time increases by six minutes for the courtroom,
14 minutes for the care home, and 1. The care home simulation involved
13 hours of moving residents, compared with three hours of static individuals in the courtroom. The
increase in computation time for the supermarket is highest, reflecting its dynamic environment, 240
customers, and complex layout, compared with the care home’s six moderately dynamic residents and
10 static individuals in the courtroom.Where the paper says it
Where the paper says it
Conclusion and Recommendation
Overall, VIRIS-3D-L is preferable for infection risk prediction and intervention assessment because it predicts higher breathing zone concentrations and greater spatial variation in risk, particularly in settings with varying people and furniture heights. Although only single-storey buildings are considered here, VIRIS-3D-L can be applied to multi-storey buildings without modification. p. 9 Extending VIRIS’s
airborne transmission model to a 3D domain increases computation time by about fourfold on average. Although only single-storey buildings are considered here, VIRIS-3D-L can be applied to multi-storey
buildings without modification. Overall, VIRIS-3D-L is preferable for infection risk prediction and intervention assessment, particularly in settings with varying people and furniture heights or frequent people movement. VIRIS remains
useful for rapid screening of simple single-storey buildings when lower computational cost is essential. Overall, VIRIS-3D-L is preferable for infection risk prediction and intervention assessment, particularly in settings with varying people and furniture heights or frequent people movement. VIRIS remains
useful for rapid screening of simple single-storey buildings when lower computational cost is essential. Although only single-storey buildings are considered here, VIRIS-3D-L can be applied to multi-storey
buildings without modification. Future work could validate VIRIS-3D-L against measured aerosol
concentrations and outbreak data, investigate airflow-driven advection in well-ventilated spaces, and
quantify how local and global representations of ventilation removal affect infection risk.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Computation Time Analysis
The difference in computation time between VIRIS and VIRIS-3D-L is provided in Table 4, separated by processing steps for three single-storey buildings. The reaction–diffusion solution component showed the largest difference in computation time between the two frameworks across all three buildings. p. 8 : Computation time in minutes for three single-storey buildings using the VIRIS, and VIRIS-3D-L modelling frameworks. Conclusion
In this paper, we extended VIRIS [30] by addressing its two assumptions: first, modelling airborne
transmission using a reaction–diffusion equation in a 3D domain instead of a 2D domain, and second,
replacing the global surface-deposition sink term with a Robin boundary condition representing local
aerosol removal at surfaces (VIRIS-3D-L framework). Here, we extend
VIRIS to model airborne transmission more realistically and compare the impact on infection risk predictions. We develop VIRIS-3D-L by extending the airborne transmission model in VIRIS (a reaction–diffusion equation)
to three dimensions (3D) and replacing global removal with a Robin boundary condition representing localised
removal due to surface deposition. 5
Supermarket 25. : Computation time in minutes for three single-storey buildings using the VIRIS, and VIRIS-3D-L modelling frameworks. The code is available
on GitHub. Results
Here, we compare individual infection risk predictions over time and computation times for VIRIS and
VIRIS-3D-L across three single-storey buildings.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Concentration Comparison
The absolute difference between scaled spatio-temporal concentration values, M(x, y, t), was estimated to compare the two frameworks across the three buildings. Figure 7 plots the average and maximum values of these absolute differences in virus concentration between VIRIS and VIRIS-3D-L across the three buildings. p. 8 The variance in infection risk is generally higher (> 1) in VIRIS-3D-L than in VIRIS. Additionally,
the maximum bounds of the box plots are lower in VIRIS than in VIRIS-3D-L across all four entrytime intervals, indicating significant underestimation in VIRIS, ranging from 29% to 45% relative to
VIRIS-3D-L. The variance in infection risk is generally higher (> 1) in VIRIS-3D-L than in VIRIS. Additionally,
the maximum bounds of the box plots are lower in VIRIS than in VIRIS-3D-L across all four entrytime intervals, indicating significant underestimation in VIRIS, ranging from 29% to 45% relative to
VIRIS-3D-L.Where the paper says it
Where the paper says it
Infection Risk Comparison
The Wilcoxon signed-rank test results showed that the two models produce systematically different infection-risk estimates for all three buildings. The one-sided test results presented in Table 3 showed that VIRIS systematically underestimates infection risk relative to VIRIS-3D-L for all three buildings. p. 8 Further, we use a one-sided Wilcoxon [29] signed-rank test (Appendix C) for statistical comparison
of infection prediction between the two frameworks. We observe that VIRIS significantly underestimates
infection risk compared with VIRIS-3D-L for all three buildings. 2), we also find that the
more realistic airborne transmission modelling in VIRIS-3D-L predicts significantly higher infection
risk and a higher disease transmission rate. These results further strengthen the recommendation to use
VIRIS-3D-L for infection risk prediction.Where the paper says it
Where the paper says it
Summary Table of Results
Table 3 presents the Wilcoxon signed-rank test results for three single-storey buildings to compare VIRIS and VIRIS-3D-L. The two-sided p-values are below 0. p. 8 These results further strengthen the recommendation to use
VIRIS-3D-L for infection risk prediction. Further, we use a one-sided Wilcoxon [29] signed-rank test (Appendix C) for statistical comparison
of infection prediction between the two frameworks. The variance in infection risk is generally higher (> 1) in VIRIS-3D-L than in VIRIS. Additionally,
the maximum bounds of the box plots are lower in VIRIS than in VIRIS-3D-L across all four entrytime intervals, indicating significant underestimation in VIRIS, ranging from 29% to 45% relative to
VIRIS-3D-L. These results further strengthen the recommendation to use
VIRIS-3D-L for infection risk prediction. Further, we use a one-sided Wilcoxon [29] signed-rank test (Appendix C) for statistical comparison
of infection prediction between the two frameworks. We compare VIRIS and VIRIS-3D-L across three single-storey buildings with
increasing architectural and people-movement complexity: a courtroom, a care home, and a supermarket. We find
that VIRIS underestimates the disease transmission rate and infection risks for individuals by up to 50% relative
to VIRIS-3D-L in all three buildings. The variance in infection risk is generally higher (> 1) in VIRIS-3D-L than in VIRIS. Additionally,
the maximum bounds of the box plots are lower in VIRIS than in VIRIS-3D-L across all four entrytime intervals, indicating significant underestimation in VIRIS, ranging from 29% to 45% relative to
VIRIS-3D-L. 2), we also find that the
more realistic airborne transmission modelling in VIRIS-3D-L predicts significantly higher infection
risk and a higher disease transmission rate. These results further strengthen the recommendation to use
VIRIS-3D-L for infection risk prediction.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Final Recommendation
Overall, VIRIS-3D-L is preferable for infection risk prediction and intervention assessment because it predicts higher breathing zone concentrations and greater spatial variation in risk. The lower estimates of infection risk and the disease transmission rate in VIRIS are unfavourable for informing policy during an outbreak. p. 8 Moreover, VIRIS underestimated the disease transmission rate compared
to VIRIS-3D-L. The lower estimates of infection risk and the disease transmission rate in VIRIS are
unfavourable for informing policy during an outbreak. The lower estimates of infection risk and the disease transmission rate in VIRIS are
unfavourable for informing policy during an outbreak. This would overestimate safe exposure durations
and lead to interventions that are insufficient to reduce infection risk during an outbreak. Future work could validate VIRIS-3D-L against measured aerosol
concentrations and outbreak data, investigate airflow-driven advection in well-ventilated spaces, and
quantify how local and global representations of ventilation removal affect infection risk. Overall, VIRIS-3D-L is preferable for infection risk prediction and intervention assessment, particularly in settings with varying people and furniture heights or frequent people movement. Additionally, the extension to VIRIS-3D-L enables
the study of multi-storey buildings in which vertical heterogeneity and connections between floors can
affect infection risk. The paper is organised as follows. Additionally, the extension to VIRIS-3D-L enables
the study of multi-storey buildings in which vertical heterogeneity and connections between floors can
affect infection risk. The paper is organised as follows.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.
Improvements for AI systems
-
Improve airborne transmission modeling by extending VIRIS to a three-dimensional domain to account for vertical concentration gradients, which addresses limitations in predicting aerosol concentrations at individuals’ mouth level and variations due to differences in people and furniture heights.
-
Enhance surface deposition modeling by replacing the
first-order global removal term
with a Robin boundary condition representing localized removal due to surface deposition, leading to a more physically realistic representation of aerosol removal. -
Increase predictive accuracy for infection risk by using the VIRIS-3D-L framework, as it is shown to predict
significantly higher infection risk and disease transmission rates than VIRIS
across all tested buildings. -
Enable study of multi-storey buildings by extending the reaction-diffusion equation to a 3D domain, allowing researchers to investigate how vertical heterogeneity and connections between floors can affect infection risk.
-
Provide more realistic assessment tools by using the statistical comparison results, which show that
VIRIS significantly underestimates infection risk compared with VIRIS-3D-L for all three buildings,
guiding policy by avoidinginsufficient disease control measures.
Abstract
The Viral Infection Risk Indoor Simulator (VIRIS) [Xue et al. 2024] combines architectural layout, people movement, and airborne transmission modelling to predict infection risk in indoor spaces. The modelling assumptions in VIRIS include: (i) uniform aerosol concentration over the building height, allowing airborne transmission to be modelled in a two-dimensional (2D) domain, and (ii) first-order global removal of aerosols to account for surface deposition. Both assumptions lead to underestimating the infectious aerosol concentration in the breathing zone. Here, we extend VIRIS to model airborne transmission more realistically and compare the impact on infection risk predictions. We develop VIRIS-3D-L by extending the airborne transmission model in VIRIS (a reaction-diffusion equation) to three dimensions (3D) and replacing global removal with a Robin boundary condition representing localised removal due to surface deposition. We compare VIRIS and VIRIS-3D-L across three single-storey buildings with increasing architectural and people-movement complexity: a courtroom, a care home, and a supermarket. We find that VIRIS underestimates the disease transmission rate and infection risks for individuals by up to 50% relative to VIRIS-3D-L in all three buildings. However, VIRIS-3D-L requires, on average, four times the computation time of VIRIS, mainly because it extends the computational domain from a 2D surface to a 3D volume. Overall, VIRIS-3D-L provides a more realistic modelling of airborne transmission than VIRIS and is particularly suited to settings with variations in people and furniture heights and frequent 3D movement. For simpler single-storey buildings, VIRIS is suitable because of its lower computational cost.
Related papers
- From life-history model to theories of ecological diversity: the impact of Madhav Gadgil's work
- A multiscale discrete-to-continuum framework for structured population models
- Diversification under Global Competition: A Cutoff-Induced Localization Mechanism
- Drivers of periodicity in population dynamic models of long-lived, large mammals
- Mutant Fixation for a Stochastic Evolutionary Model in Fragmented Populations
- Adaptation by Cumulative Selection