Quantifying the impact of 3D diffusion and local versus global removal by surface deposition on indoor airborne transmission

summary

The gist

The study extends the Viral Infection Risk Indoor Simulator (VIRIS) by modeling airborne transmission in three dimensions and replacing global removal with a local surface deposition condition to…

In short

The study extended an indoor air transmission model by adding three-dimensional modeling and changing how removal is handled. The new model, VIRIS-3D-L, uses 3D space and local surface deposition instead of global removal. Results show that the original model significantly underestimates infection risk by up to 50% across various buildings, making the 3D approach more accurate for predicting transmission rates.

Key concepts

VIRIS-3D-L
This is an extended version of the original VIRIS model. It incorporates three dimensions (3D) and replaces global removal with a local surface deposition condition. This aims to create a more realistic simulation of airborne disease spread by accounting for spatial variations in air movement and removal.
Three-Dimensional Modeling
Instead of treating the environment as flat (2D), this approach models the indoor space in three dimensions. This allows the simulation to accurately capture how aerosols move and concentrate at different heights, which is crucial because aerosol concentration varies depending on where people and furniture are located.
Local Surface Deposition
This replaces the original model's global removal term with a condition that simulates local removal due to surfaces. This means aerosols are removed from the air specifically when they come into contact with surfaces, providing a more physically realistic way to account for how airborne particles are cleared from an indoor environment.

Terminology used across episodes

This episode discusses

The paper

Extending indoor airborne infection risk modelling to 3D, with local surface deposition · Read on arXiv

Cardiff University

The Viral Infection Risk Indoor Simulator (VIRIS) [Xue et al. 2024] combines architectural layout, people movement, and airborne transmission modelling to predict infection risk in indoor spaces. The modelling assumptions in VIRIS include: (i) uniform aerosol concentration over the building height, allowing airborne transmission to be modelled in a two-dimensional (2D) domain, and (ii) first-order global removal of aerosols to account for surface deposition. Both assumptions lead to underestimating the infectious aerosol concentration in the breathing zone. Here, we extend VIRIS to model airborne transmission more realistically and compare the impact on infection risk predictions. We develop VIRIS-3D-L by extending the airborne transmission model in VIRIS (a reaction-diffusion equation) to three dimensions (3D) and replacing global removal with a Robin boundary condition representing localised removal due to surface deposition. We compare VIRIS and VIRIS-3D-L across three single-storey buildings with increasing architectural and people-movement complexity: a courtroom, a care home, and a supermarket. We find that VIRIS underestimates the disease transmission rate and infection risks for individuals by up to 50% relative to VIRIS-3D-L in all three buildings. However, VIRIS-3D-L requires, on average, four times the computation time of VIRIS, mainly because it extends the computational domain from a 2D surface to a 3D volume. Overall, VIRIS-3D-L provides a more realistic modelling of airborne transmission than VIRIS and is particularly suited to settings with variations in people and furniture heights and frequent 3D movement. For simpler single-storey buildings, VIRIS is suitable because of its lower computational cost.

Transcript

Introduction to the show: ident: Genomics Radio. Generated commentary on the latest computational biology and genomics papers.

Ines: We're looking at the paper: "Quantifying the impact of 3D diffusion and local versus global removal by surface deposition on indoor airborne transmission".

Marcus: Here's the gist of the paper. The study extends the Viral Infection Risk Indoor Simulator (VIRIS) by modeling airborne transmission in three dimensions and replacing global removal with a local surface deposition condition to provide a more realistic assessment of infection risk and transmission rates Model Extensions The authors developed VIRIS-3D-L by extending the airborne transmission model in VIRIS (a reaction–diffusion equation) to three dimensions (3D) and replacing global removal with a Robin boundary condition representing localised removal due to surface deposition.

Ines: This extension addresses limitations in the original VIRIS model where the 2D formulation leads to underestimation of aerosol concentrations at individuals’ mouth level and cannot represent variations in aerosol transport due to differences in people and furniture heights.

Marcus: Specifically, they represented each agent as a point source or sink at a height of 1.8m, with (x, y) coordinates following the agent trajectory.

Ines: Furthermore, they removed the first-order global removal term, γ, from Eq.

Paper summary: Ines: To wrap up this work on "Quantifying the impact of three dee diffusion and local versus global removal by surface deposition on indoor airborne transmission," it's clear that moving from a two-dimensional model to a three-dimensional one with localized surface deposition is fundamentally changing the output <ref:2611.13372#pg1,Quantifying the impact of 3D diffusion and local versus global removal by>.

Marcus: The authors are showing that this extension addresses key limitations in how we used to calculate infection risk, specifically concerning the spatial variation of aerosols and concentrations at different heights within an indoor space >

Yuki: It seems like the biggest implication for us in population genetics and public health is that if our models don't account for vertical gradients, we're missing a lot about where people are actually getting infected in a building >

Ines: Right. And the authors conclude that VIRIS-three dee-L is preferable for prediction and assessment because it predicts higher breathing zone concentrations and greater spatial variation in risk > <ref:2611.13372#pg1>

Marcus: They also admit that while this model is more accurate, they acknowledge that the simulation time increases significantly, which means there's a trade-off between accuracy and speed >

Yuki: So what's the final word on this paper? It’s about using more complex physics to get a better picture of transmission dynamics in indoor settings >

Ines: Exactly. And they recommend VIRIS-three dee-L for infection risk prediction and intervention assessment, especially in situations with varying people and furniture heights or frequent movement > <ref:2611.13372#pg1>

Marcus: They suggest that VIRIS remains useful for rapid screening of simple single-storey buildings when lower computational cost is essential >

Conclusion: Ines: So we've been digging into how changing the model to three dimensions and focusing on surface removal actually shifts the numbers for infection risk in indoor settings, and now we're getting to what this paper is actually trying to tell us about that whole process.

Marcus: They’re looking at this model called VIRIS-three dee-L, which takes a 2D thing and makes it three dimensions, so they can see how aerosols move up and down in the space > <ref:2611.13372#pg1>

Yuki: I think what's interesting here is how they change the removal part. Instead of just removing all the germs globally at once, they make it local surface deposition, which is much more realistic for real life >

Ines: Exactly. It changes the math from a simple removal term to something that depends on where you are physically located in relation to surfaces >

Marcus: And they used this new model across three different buildings—a courtroom, a care home, and a supermarket—to see how much more accurate it is compared to the older VIRIS version >

Yuki: The results show that the old model really underestimates the actual risk by up to fifty percent in all those buildings >

Ines: That underestimation comes from assuming uniform aerosol concentrations everywhere, which isn't true when you have different people and furniture heights >

Marcus: And they used a statistical test, a Wilcoxon signed-rank test, and it confirmed that this systematic underestimation is real across all three building types >

Yuki: So what does this mean for us? It means if we only use the simpler model, we're severely miscalculating how dangerous certain indoor spaces are for transmission >

Ines: It tells us that when planning interventions, you need a model that captures that vertical movement and those surface effects to get a better picture of where risk is actually highest >

Marcus: But they also noted the trade-off. This more realistic model takes about four times the computation time compared to the original one, which is something we have to consider when we're trying to run these simulations frequently >

Yuki: Yeah, so while this new model gives us a much better picture of risk in terms of spatial variation, we still have that computational hurdle when we try to apply it widely across many different scenarios >

More episodes

← Home