On the Method of Projection onto Localized States for Describing Reactions and Clustering

arXiv:2611.12711 · nucl-th, physics.atom-ph, physics.chem-ph, physics.comp-ph · Submitted 2026-11-09 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Nuclear Theory. The day in nuclear theory: structure, reactions and the models behind them.

Kai: We're looking at the paper: "On the Method of Projection onto Localized States for Describing Reactions and Clustering".

Mira: Here's the gist of the paper. The method of projection onto localized states intended for describing reactions and clustering is examined This method offers a simple extension of the no-core shell model to continuum- and clustered bound states The approach approximates continuum-spectrum wave functions using an ansatz of the form given by Equation (1) Here, localized functions are denoted as LF χk, while non-localized "channel" functions are denoted as ψ(0)i and ψ(1)q The wave functions Ψi of Equation (3) form should approximate true continuum wave functions, and the coefficients c ik must be found to ensure this approximation This procedure leads to a system of P + Q linear equations for P + Q coefficients c ik Abnormal Solutions and Convergence Issues In some cases, eigenfunctions of a Hamiltonian in a finite-dimensional space are taken as LF χk in Equation (1) When specific choices of χk and ¯χj are made, solutions to Equations (3) exhibit singularities for some sets of energies Specifically, when the energy E coincides with one of the Ej values, the determinant of the system vanishes because the j-th column where j ≤ P consists entirely of zeros This leads to a pole in c ij(E) at E = Ej Unitary S Matrix Construction To obtain an exactly unitary and symmetric S matrix from a dynamical calculation, the simplest possibility is to choose ψ(0)i and ψ(1)q such that the coefficients c ik with k > P are elements of K matrix The true K matrix is symmetric and real, so its symmetrization can be done directly to yield an exactly unitary and symmetric S matrix Optimization of Parameters for Accuracy The functions of relative motion entering the channel functions from Equation (1) include parameters that need optimization The values of parameters like r lcut are chosen by minimizing the quantity ∇c ik / c ik with k > P This procedure seeks parameter values that minimize this dependence, which is done by adopting the values that minimize these quantities as optimal ones Scattering Results and Convergence The method is tested in one- and two-channel np scattering problems with the Daejeon NN interaction Excellent convergence can be reached even when only oscillator states with low number of excitation quanta are retained in the calculations For instance, in one-channel scattering, excellent convergence is attained although only LF with low numbers of excitation quanta are retained in Equation (1) The results presented indicate that the present method has significant potential for ab initio studies of low-energy reactions Two-Channel Scattering Analysis For two-channel scattering, the S matrix is obtained from the calculated K matrix using S = (iI − K)(iI + K)−1 The localized functions χk from Equation (1) have the form given by Equation (11) with J = S = 1 and l = 0 and 2 The results obtained in this case are shown in Fig.

Kai: 3 It is seen that convergence of the results is very stable and it is excellent for the phase shifts δ0 and δ2 Parameter Dependence in Two-Channel Calculations At moderate N values, the results are rather sensitive to the choice of the parameters r 0cut and r 2cut entering the g0 and g2 regularizing factors from Equation (15) The "optimal" values of these parameters are found by minimizing ∆(i, j) For the choice

tanh(r/rlcut): 2l+1 of the gl factors, at an energy of E = 2 MeV, the values obtained are (r 0cut, r 2cut) = (2.25, 3) fm for all Kij matrix elements For E = 50 MeV, r 0cut = 2.5 fm for K11 and K12, and r 0cut = 2.75 fm for K21 and K22 Slow Convergence at Low Energies The reason for slow convergence in the case of g0(r) =

1 − exp(−r/r0cut): 3 is probably the following At low energy, for such a choice of g0(r), the contribution tan δ·g0(r) cos(kr)/kr varies inside the potential from the large value of about-a/R to zero, whereas the true wave function varies little inside the potential This incompatibility in describing the wave function both inside and beyond the potential can be overcome only when the number of LFs is sufficiently large Convergence Improvement Strategy In Refs.

2, 8: a specific choice of the function f has been made to improve convergence by modifying matrix elements Vnn' to Vnn'f(n, N)f(n', N) In this work, a more direct and natural way to improve convergence would be a proper modification of the relative-motion functions, i.e., of the gl factors The results presented in this section, along with those of Ref.

6: for many-body matrix elements, indicate that the present method has significant potential for ab initio studies of low-energy reactions Final Parameter Choices For the choice

1 − exp(−r/rlcut): 2l+3 of the gl factors, the final calculations below have been performed using the same r 0cut = 2 fm and r 2cut = 1.

Title and authors: Kai: So, focusing on the title of this paper, "On the Method of Projection onto Localized States for Describing Reactions and Clustering," what does that actually mean in plain English?

Mira: It means they're using localized states as a way to build up descriptions for reactions and clustering. They are essentially taking a complex problem and breaking it down into simpler pieces that are easier to handle.

Lev: Breaking things down is key, but when you’re dealing with reactions, those pieces need to accurately reflect the true physics of how particles interact in motion.

Kai: Exactly, so they’re using these localized functions as building blocks for the wave functions describing what happens in a reaction or when things cluster together.

Mira: They extend something that was already used before, specifically the no-core shell model, to include continuum and clustered bound states which is a big step.

Lev: Extending it to continuum physics is always tricky because you lose some of the simple boundary conditions you had with just bound states.

Kai: And this paper provides a critical analysis of how that previous version was done, showing where it fell short in describing things properly.

Mira: So they're not just presenting a new method out of nowhere; they are refining an existing idea by showing the flaws in its earlier realization.

Lev: That’s important because it means we need to understand the limitations of what we were doing before we can build something better on top of it.

Kai: And they offer specific ways to minimize the number of basis functions required for convergence, which is a practical improvement for real calculations.

Mira: So they're not just showing a theory; they are giving us tools that can actually make the calculations run faster and more reliably without needing an impossibly large basis set.

Lev: That’s what I need to hear, because if we keep needing massive basis sets, it doesn't translate to any practical application on real hardware.

Kai: Right, so they are giving us a way to manage the complexity of these many-body systems better for future work.

The paper's summary: Mira: Now let’s talk about the summary section of "On the Method of Projection onto Localized States for Describing Reactions and Clustering." What are they actually saying in terms of what this method achieves?

Kai: They are describing a procedure where they approximate continuum-spectrum wave functions using an ansatz given by some equation, which involves localized functions denoted as LF chi k, channel functions psi zero i and psi one q.

Mira: They also state that the trial reaction wave function Psi i must approximate the true continuum wave functions, and finding the coefficients c ik is necessary to make this approximation accurate.

Lev: Finding those coefficients c ik involves solving a system of P plus Q linear equations for those coefficients, where P and Q are related to some channel numbers.

Kai: And they found that in some cases, when you pick specific choices for chi k and the ansatz for Psi, there are singularities in the solutions at certain energies E Ej.

Mira: That means if you hit one of those energies E Ej, the determinant of that system vanishes because a whole column where j is less than or equal to P is just zeros.

Lev: That singularity means there’s a pole in the c ij coefficient as you approach that energy E Ej, which is not good for stability.

Kai: They also describe how the wave functions are formed: LF chi k and channel functions psi zero i and psi one q contribute to Psi i.

Mira: But at larger distances, those Ψ i's are made exclusively by the channel functions psi zero i and psi one q.

Lev: So it means that beyond a certain distance, you're mostly dealing with just those two types of functions describing the motion in the average interfragment Coulomb potential or free motion.

Kai: The goal is for these Psi i's to approximate the true continuum wave functions, and finding those c ik coefficients is what makes that happen.

Mira: That whole setup is about finding a way to ensure that you get these correct approximations of the true physics.

Lev: So they are setting up a mathematical framework where they have to solve for these coefficients to make the approximation work across the spectrum.

The paper's improvements: Kai: Let’s move on to what specific improvements this paper suggests in terms of making the method better.

Mira: First, they suggest a way to minimize the number of basis functions required for convergence, which we talked about earlier, which is a key practical improvement for efficiency.

Lev: They also point out an easy way to obtain an exactly unitary and symmetric S matrix directly from the dynamical calculation instead of having to do some post-hoc symmetrization later on.

Kai: That’s a structural improvement because it makes the resulting S matrix inherently physical without relying on approximations for unitarity.

Mira: And they discuss optimizing those nonlinear parameters in the trial functions Psi, which we talked about earlier, where you minimize that gradient of c ik with respect to c ik for k greater than P.

Lev: That optimization is aimed at making the method more robust so it doesn't break down when you are only using a smaller set of localized functions.

Kai: It’s a way to make the method work even under those tighter constraints, which is exactly what we need for practical application.

Mira: And they also discuss how to improve convergence by modifying the relative-motion functions instead of just changing the parameters in ways that we talked about before.

Lev: Modifying those functions seems like a more fundamental way to address the slow convergence at low energies when using certain functional choices.

Kai: So it’s a three-pronged approach: optimizing basis selection, optimizing parameters, and modifying the functions themselves for better convergence.

Mira: That covers the main takeaways regarding how to make this method work better in practice.

Conclusion: Kai: So wrapping up this discussion on "On the Method of Projection onto Localized States for Describing Reactions and Clustering," what are the big implications we should take away?

Mira: The method is promising because it can describe reactions and clustering, especially when tested with realistic interactions like the Daejeon NN interaction.

Lev: It’s promising because it shows excellent convergence in two-channel scattering problems, which is a crucial benchmark for real system simulations.

Kai: So the key points are that they found ways to manage basis set size and improve parameter choices to get better convergence even at low excitation quanta levels.

Mira: And they provided a way to get an exactly unitary and symmetric S matrix from the dynamical calculation itself, which is a big deal for physical consistency.

Lev: For me, this method has significant potential for ab initio studies of low-energy reactions because it’s being tested with real interactions and shows good convergence under certain conditions.

Kai: So that’s the method of projection onto localized states for describing reactions and clustering, with improvements focused on parameter optimization and basis selection.

V.D. Efros

National Research Centre Kurchatov Institute

nucl-th, physics.atom-ph, physics.chem-ph, physics.comp-ph

Submitted: 2026-11-09

Updated: 2026-11-09

Comments: 20 pages, 4 figures

License: http://creativecommons.org/licenses/by/4.0/

Importance score: 74/100

The gist: The method of projection onto localized states intended for describing reactions and clustering is examined This method offers a simple extension of the no-core shell model to continuum- and…

Key concepts

Projection onto Localized States
This technique approximates complex continuum wave functions by using a set of localized functions (LF $\chi_k$) to build the full description. This simplifies the problem by focusing on specific, manageable states rather than the entire energy spectrum, making it useful for describing reactions and clustering.
Unitary S Matrix Construction
The method allows for an exactly unitary and symmetric scattering matrix (S matrix) to be obtained directly from a dynamical calculation. This is achieved by ensuring the underlying K matrix is real and symmetric, which guarantees the resulting S matrix adheres to fundamental physical constraints without needing extra approximations.
Parameter Optimization
The accuracy of the method depends on optimizing parameters within the localized functions, such as $r_{lcut}$. These values are chosen by minimizing a specific quantity related to the gradient of coefficients ($ abla c_{ik} / c_{ik}$). This procedure helps find optimal settings that improve convergence and stability.
Abnormal Solutions
In some cases, using finite-dimensional eigenfunctions as localized states can lead to singularities in the calculation. Specifically, when an energy matches a specific eigenvalue ($E_j$), the system of equations breaks down because certain columns become zero, resulting in a pole in the calculated coefficients.

Terminology

Summary

The method of projection onto localized states intended for describing reactions and clustering is examined This method offers a simple extension of the no-core shell model to continuum- and clustered bound states

Methodology Outline

The approach approximates continuum-spectrum wave functions using an ansatz of the form given by Equation (1) Here, localized functions are denoted as LF χk, while non-localized channel functions are denoted as ψ(0)i and ψ(1)q The wave functions Ψi of Equation (3) form should approximate true continuum wave functions, and the coefficients c ik must be found to ensure this approximation This procedure leads to a system of P + Q linear equations for P + Q coefficients c ik

Abnormal Solutions and Convergence Issues

In some cases, eigenfunctions of a Hamiltonian in a finite-dimensional space are taken as LF χk in Equation (1) When specific choices of χk and ¯χj are made, solutions to Equations (3) exhibit singularities for some sets of energies Specifically, when the energy E coincides with one of the Ej values, the determinant of the system vanishes because the j-th column where j ≤ P consists entirely of zeros This leads to a pole in c ij(E) at E = Ej

Unitary S Matrix Construction

To obtain an exactly unitary and symmetric S matrix from a dynamical calculation, the simplest possibility is to choose ψ(0)i and ψ(1)q such that the coefficients c ik with k > P are elements of K matrix The true K matrix is symmetric and real, so its symmetrization can be done directly to yield an exactly unitary and symmetric S matrix

Optimization of Parameters for Accuracy

The functions of relative motion entering the channel functions from Equation (1) include parameters that need optimization The values of parameters like r lcut are chosen by minimizing the quantity ∇c ik / c ik with k > P This procedure seeks parameter values that minimize this dependence, which is done by adopting the values that minimize these quantities as optimal ones

Scattering Results and Convergence

The method is tested in one- and two-channel np scattering problems with the Daejeon NN interaction Excellent convergence can be reached even when only oscillator states with low number of excitation quanta are retained in the calculations For instance, in one-channel scattering, excellent convergence is attained although only LF with low numbers of excitation quanta are retained in Equation (1) The results presented indicate that the present method has significant potential for ab initio studies of low-energy reactions

Two-Channel Scattering Analysis

For two-channel scattering, the S matrix is obtained from the calculated K matrix using S = (iI − K)(iI + K)−1 The localized functions χk from Equation (1) have the form given by Equation (11) with J = S = 1 and l = 0 and 2 The results obtained in this case are shown in Fig. 3 It is seen that convergence of the results is very stable and it is excellent for the phase shifts δ0 and δ2

Parameter Dependence in Two-Channel Calculations

At moderate N values, the results are rather sensitive to the choice of the parameters r 0cut and r 2cut entering the g0 and g2 regularizing factors from Equation (15) The optimal values of these parameters are found by minimizing ∆(i, j) For the choice [tanh(r/rlcut)]2l+1 of the gl factors, at an energy of E = 2 MeV, the values obtained are (r 0cut, r 2cut) = (2.25, 3) fm for all Kij matrix elements For E = 50 MeV, r 0cut = 2. p. 9

Where the paper says it

The oscillator energy is ¯hω(2n + l + 3/2), where ω is the oscillator frequency. The Daejeon16 NN interaction [9] we employ is constructed in the form of matrix elements between oscillator functions (11) with ¯hω = 25 MeV.

5 fm for K11 and K12, and r 0cut = 2.75 fm for K21 and K22

Slow Convergence at Low Energies

The reason for slow convergence in the case of g0(r) = [1 − exp(−r/r0cut)]3 is probably the following At low energy, for such a choice of g0(r), the contribution tan δ·g0(r) cos(kr)/kr varies inside the potential from the large value of about-a/R to zero, whereas the true wave function varies little inside the potential This incompatibility in describing the wave function both inside and beyond the potential can be overcome only when the number of LFs is sufficiently large

Convergence Improvement Strategy

In Refs. [2, 8] a specific choice of the function f has been made to improve convergence by modifying matrix elements Vnn' to Vnn'f(n, N)f(n', N) In this work, a more direct and natural way to improve convergence would be a proper modification of the relative-motion functions, i.e., of the gl factors The results presented in this section, along with those of Ref. p. 3

Where the paper says it

(4) The matrix elements of the first type are standard within the framework of the ncsm. The calculation procedure for the matrix elements of the second type is presented in Ref.

[6] for many-body matrix elements, indicate that the present method has significant potential for ab initio studies of low-energy reactions

Final Parameter Choices

For the choice [1 − exp(−r/rlcut)]2l+3 of the gl factors, the final calculations below have been performed using the same r 0cut = 2 fm and r 2cut = 1.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Optimized basis selection for localized functions can be implemented to ensure that excellent convergence is attained even when only low-excitation oscillator states are retained in the calculations, improving efficiency while maintaining accuracy for low-energy reactions.

  2. Implementation of a way to minimize the number of basis functions required for convergence will allow AI systems to reach stable results with fewer computational resources, especially in complex many-body problems like those involving reactions and clustering.

  3. A method is provided to obtain exactly unitary and symmetric S matrix from dynamical calculation, enabling AI systems to calculate reaction parameters that are inherently physically consistent without relying on post-hoc approximations for unitarity.

  4. The procedure for choosing nonlinear parameters can be optimized by seeking parameter values that "minimize the quantity |nabla c i k / c i k| with k > P," ensuring better convergence even when only a smaller number of localized functions is retained.

  5. The method allows for the calculation of exact unitary and symmetric S matrices in two-channel scattering problems by using a real and symmetric K matrix derived from Eqs. (3), which ensures that the resulting S matrix will be exactly unitary and symmetric.

Abstract

The method of projection onto localized states intended for describing reactions and clustering is examined. In particular, the method offers a simple extension of the no-core shell model to continuum- and clusterized bound states. A critical analysis of a previous realization of the method is provided. A way to minimize the number of basis functions required for convergence is given. An easy way to obtain exactly unitary and symmetric S matrix from calculations is pointed out. The method is tested in one- and two-channel np scattering problems with the Daejeon NN interaction. It is shown that excellent convergence can be reached even when only oscillator states with low number of excitation quanta are retained.

Sources

Related papers