Measurement of the branching fractions for the decays chi cJ to phi omega eta and chi cJ to phi omega eta
Listen
Radio episode about this paper
Transcript
Introduction to the show: ident: High Energy Physics: Experiment. The day in high-energy experiment: detectors, searches and limits.
Kai: We're looking at the paper: "Measurement of the branching fractions for the decays chi cJ to phi omega eta and chi cJ to phi omega eta".
Mira: Here's the gist of the paper. Measurement of the branching fractions for the decays chi cJ to phi omega eta and chi cJ to phi omega eta is important because these measurements will be helpful for understanding chi cJ → V V P decay mechanisms and exploring previously unobserved chi cJ decays.
Kai: The branching fractions are determined to be B(χc0 → ϕωη) = (5.43 ± 0.23 ± 0.52) × 10−4, B(χc1 → ϕωη) = (2.51±0.14±0.24)×10−4 and B(χc2 → ϕωη) = (3.03±0.15±0.28)×10−4 for the η mode, and B(χc0 → ϕωη′) = (1.23±0.23±0.15)×10−4, B(χc1 → ϕωη′) = (1.09±0.17±0.13)×10−4 and B(χc2 → ϕωη′) = (0.98 ± 0.17 ± 0.11) × 10−4 for the η′ mode.
Mira: Experimental Setup and Data Collection The BESIII detector records symmetric e+e− collisions provided by the BEPCII storage ring in the center-of-mass energy range from 1.84 to 4.95 GeV, with a peak luminosity of 1.1 × 1033 cm−2 s−1 achieved at √s = 3.773 GeV.
Kai: The cylindrical core of the BESIII detector covers 93% of the full solid angle and consists of a helium-based multilayer drift chamber (MDC), a plastic scintillator timeof-flight system (TOF), and a CsI (Tl) electromagnetic calorimeter (EMC), all enclosed in a superconducting solenoidal magnet providing a 1.0 T magnetic field.
Title and authors: Kai: So we're looking at this paper now titled "Measurement of the branching fractions for the decays chi cJ to phi omega eta and chi cJ to phi omega eta". This work is focused on measuring how often these specific particles decay.
Mira: Exactly. We're talking about figuring out the branching fractions for decays like chi c0 to phi omega eta and chi c1, and so on. It’s important because these measurements help us understand the mechanisms behind how chi cJ decays into vector-vector-pseudoscalar combinations, and it lets us explore some decay channels we haven't seen before.
Lev: From an engineering side, what matters is getting the signal clean enough to measure those specific branching fractions accurately on real hardware. We need good resolution on the final states to make sure we're not just picking up random noise.
Kai: Right, that’s what we’re talking about. The paper outlines how they set up the experiment at BESIII in order to collect this data, detailing everything from the collision energy range to the detector components used for tracking and calorimetry.
Mira: And then they get into the specifics of how they reconstruct these final states. For example, when looking at chi cJ to phi omega eta, they use a specific method involving minimizing a certain quantity related to the masses of those particles.
Lev: That reconstruction method sounds like it introduces some dependencies on the assumptions about particle masses and energy scales. We need to see how sensitive the final branching fractions are to those choices.
Kai: The paper then moves into determining these branching fractions using a specific product formula involving measurements from other decay channels, like B(psi(three thousand six hundred eighty-six) to gamma chi cJ). They divide that product by a known value from the PDG to get the final branching fraction for each mode.
Mira: And they report some specific numbers for the different modes. For instance, they find B(chi c0 to phi omega eta) is around five point four three times ten to the minus four, and similarly for chi c1 and chi c2 into those states.
Lev: Those numbers are reported with uncertainties, which include both statistical errors from the data collection itself and systematic errors coming from things like the detector performance or the theoretical models they use for background estimation.
Title and authors: Kai: The paper does a lot of work detailing those systematic uncertainties, summarizing them in a separate table, which is pretty important because it shows where the biggest potential pitfalls are. For example, they state that the total uncertainty for chi cJ to phi omega eta is around nine point five percent.
Mira: It’s interesting because they specifically list uncertainties related to things like photon detection and the BODY3 generator model. This tells us that our understanding of these decay rates is tied not just to how much data we collect, but also to how well we model the underlying physics in the simulation.
Lev: If you were trying to run this on a real machine, you’d have to make sure your error correction and tracking systems can handle those kinds of resolutions. The paper mentions momentum resolution at one gigaelectron volt is about zero point five percent, which is pretty tight for these types of measurements.
Kai: So when we look at the results, the paper notes that they observed some clear structures in the omega eta system, particularly in chi c1 and chi c2 signal regions. But they admit that because their statistics are limited, they aren't going to investigate those structures in more detail right now.
Mira: That makes sense. It points toward the need for more data to properly map out those potential features in the decay dynamics. The implication is that we have a starting point, but we can’t yet see the full picture of how these decays are happening.
Lev: If you were designing an experiment to improve this, you’d want to focus on collecting enough events so that those limited statistics don't obscure real physics signals. It also suggests that future work needs to include theoretical input, especially interference effects, to really nail down what those structures mean.
Kai: So the main points here are the specific branching fraction measurements they made for these chi cJ decays, and the caveats about their statistical limitations regarding those omega eta structures.
Mira: And looking at how they suggest improvements, they point toward using more advanced data analysis techniques to categorize events based on their origin. Specifically, they suggest performing simultaneous two dimensional unbinned maximum likelihood fits to the mass distributions of chi cJ into phi omega eta versus the mass distribution of a different set of particles.
Lev: That sounds like a complex fit that would be very demanding on computational resources for real hardware implementation, but if you can sort out the event categorization between signal and background components, it could really help isolate those branching fractions.
Title and authors: Kai: And they also suggest using kinematic fits to constrain the total four momentum of all the final state particles. They talk about a six constraint fit to do that, which is quite restrictive on your assumptions about how you measure everything.
Mira: That six constraint fit is interesting because it forces a very tight agreement between the measured momenta and the assumed particle masses and energies throughout the entire decay chain. It’s a strong check on our modeling assumptions.
Lev: And they also mention a four constraint fit to suppress background by imposing energy momentum conservation under different photon hypotheses, which helps filter out things that aren't truly signal events. That adds another layer of complexity to the analysis pipeline.
Kai: So the paper is essentially saying we have these measured branching fractions and some hints about structures in the omega eta system, but they need better data and more sophisticated analysis tools to really dig into what’s going on there.
Mira: Ultimately, this work provides a crucial baseline for understanding chi cJ decays into these specific final states, setting the stage for future investigations into those decay mechanisms. It’s a necessary step in exploring these particle interactions.
Lev: For me, what this means is that if we want to build real hardware capable of measuring things like this with high precision, we need to incorporate those improved analysis methods from the start so the data we collect actually translates into useful physics results.
Kai: So to wrap up on the paper "Measurement of the branching fractions for the decays chi cJ to phi omega eta and chi cJ to phi omega eta", it gives us solid initial numbers, but it also clearly shows where we need more statistics and better fitting tools to uncover deeper details about these decays.
Mira: Indeed. It’s a step forward because it establishes what we can measure now, which then guides where the community needs to focus its efforts next for understanding these chi cJ decay channels.
Lev: Yeah, the path from these initial measurements to truly understanding the underlying dynamics is paved with those kinds of sophisticated analysis techniques you mentioned.
Kai: That’s it for this paper. We'll be ready to look at whatever comes next on arXiv soon.
The paper's summary: Kai: So we've seen how they set up their experiment at BESIII to look at those chi cJ decays into phi omega eta and how they got some initial branching fraction numbers.
Mira: Right, so this paper is really about nailing down the precise rates for these specific decay channels. They're measuring how often chi c0, chi c1, and chi c2 turn into those particular combinations of particles.
Kai: Exactly. The core result is those branching fractions like B(chi c0 to phi omega eta) being around five point four times ten to the minus four. That gives us a baseline for what these decays look like in nature right now.
Lev: From my side, that number is interesting because it tells us how much signal we need to pull out of the noise on real hardware just to get those statistics down enough to trust that measurement.
Mira: And the caveat they lay out is important too. They admit they don't have tons of data yet, so they can't really look deep into all the little structures in the omega eta system right now.
Kai: It means we have these first snapshots, but we need more events to see if those structures are real physics or just statistical noise.
Lev: If you were building a detector for this, that limitation means you can't use very aggressive background suppression techniques yet because you don't have enough signal events to validate the suppression method fully.
Mira: It really highlights the path forward they suggest, which is using more advanced analysis pipelines. They talk about fitting those mass distributions in two dimensions to separate the signal from things like background processes.
Kai: And that sounds like a big computational lift, trying to fit all those variables simultaneously to categorize every event into signal or whatever else it might be.
Lev: Yeah, and they also suggest these kinematic fits, using six constraints on the four momentum of all the final state particles just to tighten up the assumptions about their masses and energies.
Mira: That forces a very tight check on our models because if those six constraints don't agree with what we measure in the detector, then our understanding of how these decays work is shaky.
Kai: So it’s not just about getting a final number; it’s about building a rigorous analysis pipeline that can handle all those dependencies and uncertainties.
Lev: If you want to run this kind of measurement on real hardware, you gotta build in those complex fitting steps right from the start, or the data will just be messy and uninterpretable.
Mira: Ultimately, this paper provides a solid starting point for understanding these chi cJ decays into vector-vector-pseudoscalar combinations. It sets the stage for us to figure out what's happening next in these particle interactions.
Kai: So we have the measured rates, and now we’re looking at how to use better math and more data to see if there are hidden details in that omega eta system.
Lev: The real question is whether those hidden details actually exist, because if they do, then it tells us a lot about the underlying theory of how these particles interact.
The paper's improvements: Tom: So we've heard the initial branching fractions and some of the caveats about not having tons of data on those omega eta structures for this chi cJ decay paper.
Kai: Right, now we’re looking at how they suggest improving that whole analysis pipeline. They aren't just stopping at the measurements; they’re proposing ways to get a much clearer picture.
Mira: They suggest using simultaneous two dimensional unbinned maximum likelihood fits to map out the mass distributions in two different ways, which helps them categorize events by their origin, like signal versus background.
Lev: That sounds like a heavy computational load for real hardware because you’re trying to fit all those variables at once while maintaining high fidelity.
Kai: It does sound demanding, but they also propose kinematic fits using six constraints on the four momentum of all final state particles to strictly control the total energy and momentum of the decay.
Mira: That six constraint fit is a powerful tool because it forces a very tight agreement between our measured momenta and what we assume about particle masses across the whole decay chain.
Lev: If that six constraint doesn't work out cleanly, it means either our measurement system has errors, or our assumptions about the underlying physics of these decays are wrong.
Kai: And they also mention a four constraint fit to suppress background by checking energy and momentum conservation under different photon hypotheses.
Mira: So it’s about using those constraints not just to find a signal, but to systematically filter out everything that isn't the specific decay channel we're looking for.
Lev: That sounds like adding another layer of complexity to the software, but if it works, it means we can get much cleaner numbers on these branching fractions than they could get with just simple counting.
Kai: So what this implies for us is that future experiments need to focus not just on collecting more raw data, but on building analysis tools that can handle this level of constraint and categorization.
Mira: It means the next step isn't just a bigger run at BESIII; it’s about refining the math and the filtering process before we even start collecting new data.
Lev: If you want to build a real experiment, you need those improvements in your analysis pipeline baked in from day one so you don't end up with messy data later on.
Kai: This paper shows us that there’s a clear direction now for how we should analyze these decays, even if the statistics are currently holding back the deeper look into those omega eta structures.
Conclusion: Kai: So we’ve covered how they measured those specific branching fractions for chi cJ to phi omega eta and chi cJ to phi omega eta, including the initial numbers and the caveats about limited statistics.
Mira: Right, so they’re giving us a solid baseline for these decays into vector-vector-pseudoscalar combinations, which is a crucial first step in understanding these particle interactions.
Lev: From an engineering standpoint, those initial numbers are just starting points; we need the analysis tools they propose to actually make those results useful on real hardware.
Kai: Exactly. The paper shows us that while we have these measurements now, the next phase involves implementing more sophisticated fitting methods to really probe those potential structures in the omega eta system.
Mira: It’s about moving beyond just reporting a number and figuring out what those subtle patterns actually mean for the underlying physics of chi cJ decays.
Lev: If you want to run this kind of experiment, you need that level of analysis refinement from the beginning because running raw data through those complex fits is where the real overhead lands on your computing resources.
Kai: Ultimately, this work on "Measurement of the branching fractions for the decays chi cJ to phi omega eta and chi cJ to phi omega eta" gives us a clear roadmap for how we need to go next in terms of both data collection and analysis techniques.
Mira: It establishes what we can measure now while pointing directly toward where the community needs to focus its efforts next for deeper investigation into these decay mechanisms.
Lev: For me, it’s about seeing those structures confirmed by better statistics so we can start building the error-correction layers that actually matter for real physics experiments.
Kai: So we have these initial measurements and a clear plan for how to improve the data analysis to get those deeper insights.
Mira: It’s a necessary step in exploring these particle interactions because it sets the stage for what we can investigate with higher precision down the line.
M. Ablikim, M. N. Achasov, P. Adlarson, X. C. Ai, C. S. Akondi A, B, R. Aliberti A, B C, Q. An †, 65
Institute of High Energy Physics, Beijing 100049, People’s Republic of China · Beihang University, Beijing 100191, People’s Republic of China · Bochum Ruhr-University, D-44780 Bochum, Germany · Budker Institute of Nuclear Physics SB RAS (BINP), Novosibirsk 630090, Russia · Carnegie Mellon University, Pittsburgh, Pennsylvania 15213, USA · Central China Normal University, Wuhan 430079, People’s Republic of China · Central South University, Changsha 410083, People’s Republic of China · Chengdu University of Technology, Chengdu 610059, People’s Republic of China · Johannes Gutenberg University of Mainz, Johann-Joachim-Becher-Weg 45, D-55099 Mainz, Germany · Joint Institute for Nuclear Research, 141980 Dubna, Moscow region, Russia
hep-ex
Submitted: 2026-11-09
Updated: 2026-11-09
Comments: 15 pages, 7 figures, 2 tables
License: http://creativecommons.org/licenses/by-nc-sa/4.0/
Importance score: 81/100
The gist: Measurement of the branching fractions for the decays chi cJ to phi omega eta and chi cJ to phi omega eta is important because these measurements will be helpful for understanding chi cJ → V V P…
Key concepts
- Branching Fraction (BF)
- The BF is a probability that a particle will decay into a specific set of final particles. It's expressed as a fraction, indicating how frequently one particular decay channel occurs compared to all possible decays. The measured values quantify the relative likelihood of $\chi_{cJ}$ decaying into $\phi \omega \eta$ or $\phi \omega \eta'$ channels.
- $\\chi_{cJ}$ Decays
- $\chi_{cJ}$ particles are excited states of charmonium (charm quark and anti-charm quark). These particles are produced in $e^+e^-$ collisions and then decay into lighter mesons. The paper focuses on specific decay modes involving $\phi$, $\omega$, $\eta$, and $\eta'$ mesons.
- Systematic Uncertainties
- These are the potential errors in the measurement that arise from various sources, such as detector performance (like tracking or photon detection) and theoretical models used for analysis. The paper quantifies these uncertainties to give a reliable estimate of the final branching fraction values.
Terminology
Summary
Measurement of the branching fractions for the decays chi cJ to phi omega eta and chi cJ to phi omega eta is important because these measurements will be helpful for understanding chi cJ → V V P decay mechanisms and exploring previously unobserved chi cJ decays. p. 4 3)×106 ψ(3686) events [6] since
2008, providing an excellent opportunity to study previously unexplored χcJ decay modes with the large χcJ
samples produced in radiative ψ(3686) decays. In this
paper, we present the first measurements of the branching fractions of χcJ → ϕωη and χcJ → ϕωη′ using this
data sample. 3) × 106 ψ(3686) events collected with the BESIII detector at
the BEPCII collider, we report the first observation and measurement of the branching fractions
for the decays χcJ → ϕωη and χcJ → ϕωη′
(J = 0, 1, 2) with statistical significance greater than
5σ. The branching fractions are determined to be B(χc0 → ϕωη) = (5. The branching fractions are determined to be B(χc0 → ϕωη) = (5. 52) × 10−4
,
B(χc1 → ϕωη) = (2. 52) × 10−4
,
B(χc1 → ϕωη) = (2. 24)×10−4
and B(χc2 → ϕωη) = (3. 24)×10−4
and B(χc2 → ϕωη) = (3. 28)×10−4
for the η
mode, and B(χc0 → ϕωη′
) = (1. The branching fractions are determined to be B(χc0 → ϕωη) = (5. 52) × 10−4
,
B(χc1 → ϕωη) = (2. 52) × 10−4
,
B(χc1 → ϕωη) = (2. 24)×10−4
and B(χc2 → ϕωη) = (3. 24)×10−4
and B(χc2 → ϕωη) = (3. 28)×10−4
for the η
mode, and B(χc0 → ϕωη′
) = (1.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Experimental Setup and Data Collection
The BESIII detector records symmetric e+e− collisions provided by the BEPCII storage ring in the center-of-mass energy range from 1.84 to 4.95 GeV, with a peak luminosity of 1. p. 4 BESIII DETECTOR AND MONTE CARLO
SIMULATION
The BESIII detector [7] records symmetric e
+e
− collisions provided by the BEPCII storage ring [8] in the
center-of-mass energy range from 1. 95 GeV, with
a peak luminosity of 1. 95 GeV, with
a peak luminosity of 1. 1 × 1033 cm−2
s
−1 achieved at
√
s = 3. 6
The cylindrical core of the BESIII detector covers 93%
of the full solid angle and consists of a helium-based multilayer drift chamber (MDC), a plastic scintillator timeof-flight system (TOF), and a CsI (Tl) electromagnetic
calorimeter (EMC), all enclosed in a superconducting
solenoidal magnet providing a 1. 0 T magnetic field. p. 5 6
The cylindrical core of the BESIII detector covers 93%
of the full solid angle and consists of a helium-based multilayer drift chamber (MDC), a plastic scintillator timeof-flight system (TOF), and a CsI (Tl) electromagnetic
calorimeter (EMC), all enclosed in a superconducting
solenoidal magnet providing a 1. 0 T magnetic field. The
solenoid is supported by an octagonal flux-return yoke
with resistive plate counter muon identification modules
interleaved with steel. The charged-particle momentum
resolution at 1 GeV/c is 0. The charged-particle momentum
resolution at 1 GeV/c is 0. 5%, and the dE/dx resolution
is 6% for electrons from Bhabha scattering.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Event Selection Criteria
The ϕ, ω, η′, η, and π0 mesons are reconstructed via their dominant decay modes ϕ → K+K−, ω → π+π−π0, η′ → π+π−η and η → γγ and π0 → γγ. For the χcJ → ϕωη′ mode, the ω and η′ are reconstructed by minimizing ∆ = √ (M(π+1 π−1 π0)−M(ω))2 + (M(π+2 π−2 η)−M(η′))2. p. 6 2, where the data-MC agreement is
improved compared to that based on the PHSP model. The decay χcJ → ϕωη′
Since in χcJ → ϕωη′
events multiple π
+π
− combinations are possible, the ω and η
′ are reconstructed by minimizing ∆ = √
(M(π
+
1 π
−
1 π0)−M(ω))
2
σω
2 +
(M(π
+
2 π
−
2
η)−M(η′))
2
ση′
2 ,
where M(ω) and M(η
′
) are the nominal masses of
the ω and η
′ mesons from the PDG [4], and σω
and ση′ are the corresponding mass resolutions obtained from signal MC simulation, respectively. The decay χcJ → ϕωη
To determine the signal yields and constrain the nonresonant background in χcJ → ϕωη events, a simultaneous two-dimensional (2D) unbinned maximum likelihood fit is performed to the M(ϕωη) versus M(π
+π
−π
0
)
distributions of selected data candidates in the ϕ signal
and sideband regions. The ϕ signal region is defined as
M(K+K−) ∈ [1. For the χcJ → ϕωη channel, to suppress the background from the decay ψ(3686) → π
+π
−J/ψ, the recoil mass of π
+π
−, RM(π
+π
−), is required to satisfy
|RM(π
+π
−)−M(J/ψ)| > 0. 012 GeV/c
2
, where M(J/ψ)
is the nominal mass of J/ψ [4]. The BFs of
χcJ → ϕωη and χcJ → ϕωη′ are measured via the radiative decays ψ(3686) → γχcJ . The signal events are
required to contain four and six charged tracks with zero
net charge for the ϕωη and ϕωη′ modes, respectively, and
at least five photon candidates.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Branching Fraction Determination
The BFs of χcJ → X (X = ϕωη, ϕωη′) are determined using B(ψ(3686) → γχcJ) · B(χcJ → X) = Nnet · ϵ · B(sub). The product of the BFs is obtained by dividing this product by B(ψ(3686) → γχcJ) taken from the PDG. p. 9 Using this formula, the products
of the BFs B(ψ(3686) → γχcJ ) · B(χcJ → X) are determined. The B(χcJ → X) is obtained by dividing this
product by B(ψ(3686) → γχcJ ) taken from the PDG [4]. The B(χcJ → X) is obtained by dividing this
product by B(ψ(3686) → γχcJ ) taken from the PDG [4]. The obtained results for χcJ → ϕωη and χcJ → ϕωη′ are
summarized in Table I.Where the paper says it
Where the paper says it
Systematic Uncertainties
The systematic uncertainties in the BF measurements originate from several sources, as summarized in Table II. These include uncertainties associated with PID and tracking, photon detection, mass window requirements, and the BODY3 generator model. p. 9 The systematic uncertainty associated with the mass
window requirements is estimated by studying the differences in mass resolution between the data and signal
MC simulation. The differences of the accepted efficiencies between the data and MC simulation are taken as
the systematic uncertainties, which are 0. The obtained results for χcJ → ϕωη and χcJ → ϕωη′ are
summarized in Table I. SYSTEMATIC UNCERTAINTY
The systematic uncertainties in the BF measurements
originate from several sources, as summarized in Table II.Where the paper says it
Where the paper says it
Conclusion
Our measurements will be helpful for understanding chi cJ → V V P decay mechanisms and exploring previously unobserved chi cJ decays. Clear structures are observed in the ωη system; however, due to the limited statistics, we do not investigate these structures in detail. p. 6 Figure 2 shows the invariant
mass distributions of the different two-body combinations for the χc0,1,2 signal regions, after subtracting the
background contributions using the inclusive MC samples. Clear structures are observed in the ωη system close
to the ωη threshold in χc1,2 signal regions, which are not
well described by the PHSP model.Where the paper says it
TABLE I. Fitted signal yields, detection efficiencies, and measured BFs for the signal decays. p. 5 The BFs of
χcJ → ϕωη and χcJ → ϕωη′ are measured via the radiative decays ψ(3686) → γχcJ . The signal events are
required to contain four and six charged tracks with zero
net charge for the ϕωη and ϕωη′ modes, respectively, and
at least five photon candidates. The signal yields
are summarized in Table I. The statistical significance of
each χc0,1,2 → ϕωη signal exceeds 5σ. 13)×10−4
and B(χc2 → ϕωη′
) = (0. 11) × 10−4
for the η
′ mode, where the first uncertainties are
statistical and the second systematic.Where the paper says it
Where the paper says it
Where the paper says it
Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.
Improvements for AI systems
-
Improved data analysis pipelines will be able to perform simultaneous two-dimensional unbinned maximum likelihood fits to M(phi omega eta) versus M(pi plus pi minus pi zero) distributions, categorizing events into Signal, BKGI, BKGII, and BKGIII components based on their origin.
-
The improved system can accurately determine branching fractions by calculating the product of BFs using the formula provided: B(ψ(3686) → γχcJ) · B(χcJ → X) = Nnet · ϵ · B(sub).
-
The AI system will be able to quantify systematic uncertainties by summing all individual contributions in quadrature, including uncertainties from PID, tracking, photon detection, mass window requirements, and the BODY3 generator model.
-
The improved system can perform kinematic fits using a six-constraint (6C) fit to constrain the total four-momentum of final-state particles and a four-constraint (4C) fit to suppress background by imposing energy-momentum conservation under different photon hypotheses.
-
The AI system can evaluate the potential for intermediate states by scrutinizing invariant mass distributions, specifically observing
Clear structures in the omega eta system close to the omega eta threshold in χc1,2 signal regions.
Abstract
Using a sample of (2712.4 plus or minus 14.3) times 10 6 ψ(3686) events collected with the BESIII detector at the BEPCII collider, we report the first observation and measurement of the branching fractions for the decays χ cJ to ϕωη and χ cJ to ϕωη (J = 0,1,2) with statistical significance greater than 5σ. The branching fractions are determined to be B(χ c0 to ϕωη) = (5.43 plus or minus 0.23 plus or minus 0.52) times 10-4, B(χ c1 to ϕωη) = (2.51 plus or minus 0.14 plus or minus 0.24) times 10-4 and B(χ c2 to ϕωη) = (3.03 plus or minus 0.15 plus or minus 0.28) times 10-4 for the η mode, and B(χ c0 to ϕωη) = (1.23 plus or minus 0.23 plus or minus 0.15) times 10-4, B(χ c1 to ϕωη) = (1.09 plus or minus 0.17 plus or minus 0.13) times 10-4 and B(χ c2 to ϕωη) = (0.98 plus or minus 0.17 plus or minus 0.11) times 10-4 for the η mode, where the first uncertainties are statistical and the second systematic.
Related papers
- DrSai: an agentic AI system toward autonomous physics analysis workflows at BESIII
- CANTON- mu Proposal: A Next-Generation Muon g-2 Measurement at Sub-0.1 ppm Precision
- Search for dark photon dark matter near 1,meV using a superconducting mixer
- ANUBIS detector and its sensitivity to neutral long-lived particles
- How to scale your HEP ML models: A recipe for robust architecture comparisons at scale
- Search for the 16 O(ppp) to 13 C pi+ pi+ e+ Decay Mode in Super-Kamiokande Using Machine Learning Techniques