The Koto II experiment

arXiv:2611.08514 · hep-ex · Submitted 2026-10-19 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: High Energy Physics: Experiment. The day in high-energy experiment: detectors, searches and limits.

Kai: I'm Kai.

Mira: And I'm Mira, here with Lev.

Kai: We're looking at the paper: "The Koto II experiment".

Mira: Here's the gist of the paper. KL → π0νν¯ is a golden mode for flavour physics: it is highly suppressed in the Standard Model, with a predicted branching ratio of 3 × 10−11 and a theoretical uncertainty of just 2%, and is therefore extremely sensitive to new physics The KOTO Experiment The KOTO experiment at J-PARC is searching for this decay The current best upper limit on its branching ratio is 2.2 × 10−9 at 90% C.L., obtained with KOTO data taken in 2021 A next-generation experiment, KOTO II, was proposed in 2024 with the goal of observing the decay with more than 5σ significance in the 2030s at the SM value of the branching ratio Experimental Setup and Data Collection The experimental apparatus involves a 30 GeV proton beam from the J-PARC main ring extracted for 2 s every 5.2 s towards the gold target The KL flux, with a momentum distribution peaking at 1.4 GeV/c, was measured to be 2.1 × 10−7 KL’s per proton on target (POT) The KOTO detector includes a 2 m diameter cylindrical electromagnetic calorimeter (CSI) with 2716 undoped CsI crystals The total number of background events in the signal region was estimated to be 0.252±0.055stat+0.052−0.067 syst The single event sensitivity (SES) on the 2021 data was estimated to be (9.33±0.06stat±0.84syst)×10−10 The major contributions to the SES uncertainties were from kinematic cuts for KL → 2π0(KL → π0νν¯) (3.5%), shape-related cuts (4.2%), and normalization modes inconsistency (3.5%) Future Goals for KOTO II KOTO II is planned to collect tens of signal events, aiming at the measurement of the KL → π0νν¯ branching ratio through the observation of the decay A running time of 3 × 107 s with a 100 kW beam is considered for KOTO II The expected number of signal events in 3 × 107 s of running, assuming the SM BR(KL → π0νν¯) ≃ 3 × 10−11, is 35 A total of 40 background events is expected, giving a signal-to-background ratio (S/B) of 0.89 KOTO II's second phase will extend the program to KL → π0l+l− Measurement of Lepton Flavor Violation A measurement of the KL → π0l+l− decay rate with 25% precision would provide crucial complementary information for the interpretation of the K → πνν¯ measurements in terms of NP models with lepton flavour universality (LFU) violation The second phase of KOTO II will optimize the detector setup with the addition of charged-particle tracking KOTO II has received J-PARC Stage-1 approval; the collaboration has been formed, R&D is finalizing the detector design, and a TDR towards Stage-2 approval is in preparation The extension of the Hadron Experimental Facility will enable the realization of KOTO II, and its funding is being actively pursued The experiment aims to reach SES < 10−10 in 3-4 years References A.

Kai: J.

Mira: Buras, Eur.

Kai: Phys.

Paper summary: Kai: So looking at the Koto II experiment paper and what we've just discussed, the title is The Koto II experiment by Silvia Martellotti et al. It’s a proposal for a next generation search for KL to pi zero neutrino neutrino bar >

Mira: And their main point is that this decay mode is highly suppressed in the Standard Model, with a prediction of three times ten minus eleven and only a two percent theoretical uncertainty > <ref:2611.08514#pg1,is highly suppressed in the Standard Model, with a>

Lev: What this means for the world is that if they can reach their goal of observing this decay or setting a better limit than the current two point two times ten minus nine it provides essential new information about the flavor structure of the quark sector through that s to d transition > <ref:2611.08514#pg1>

Kai: And they also have this second aim with KL to pi zero l plus l minus, which is important for understanding lepton flavor universality violation in new physics models >

Mira: So in simple terms, Koto II is trying to use a much better experiment at J-PARC to see if the Standard Model prediction for this decay rate holds true or if we need new physics contributions >

Lev: And the implication is that they are building something designed to push sensitivity down toward one point zero minus ten in the next few years >

Conclusion: Kai: So we're looking at the conclusion of The Koto II experiment paper by Martellotti and others >

Mira: It boils down to testing if this decay happens at all in a way that Standard Model physics predicts it should be almost impossible >

Kai: Right, they are looking for a specific decay, KL to pi zero neutrino neutrino bar, which the Standard Model says has a branching ratio of three times ten minus eleven >

Mira: But they're not just checking if it exists; they're trying to measure how much lower than that three times ten minus eleven it actually is >

Kai: The current limit they have from the two thousand twenty-one data is two point two times ten minus nine at ninety percent confidence level >

Lev: That limit sounds pretty tight for what we are aiming for on real hardware, which tells us how sensitive their measurement needs to be >

Mira: Exactly, and this experiment has a second goal, looking at KL to pi zero l plus l minus >

Kai: Which is important because that decay rate could give us clues about lepton flavor universality violation in new physics models >

Lev: So they're not just chasing one signal; they're setting up a whole system to look for different types of anomalies in the quark and lepton sectors simultaneously >

Silvia Martellotti

INFN Laboratori Nazionali di Frascati · J-PARC

hep-ex

Submitted: 2026-10-19

Updated: 2026-10-19

License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/

Importance score: 82/100

The gist: KL → π0νν¯ is a golden mode for flavour physics: it is highly suppressed in the Standard Model, with a predicted branching ratio of 3 × 10−11 and a theoretical uncertainty of just 2%…

Key concepts

KL → π⁰νν̄
This is a specific particle decay being searched for. It involves a kaon (KL) decaying into two neutral pions ($\pi^0$) and neutrinos ($\nu\bar{\nu}$). This decay is extremely rare according to the Standard Model, making it a key probe for physics beyond the Standard Model.
Standard Model Prediction
The Standard Model predicts a very low branching ratio for KL → π⁰νν̄, estimated at $3 \times 10^{-11}$. This extremely small value means that any observation of this decay would be a strong indicator of new, undiscovered physics influencing particle interactions.
KOTO II Goals
KOTO II is the proposed next-generation experiment designed to observe the KL → π⁰νν̄ decay with greater statistical certainty (over 5$\\sigma$) in the 2030s. It plans to collect tens of signal events, aiming for a sensitivity below $10^{-10}$ within a few years.
Lepton Flavor Violation (LFV)
Measuring the decay rate KL → π⁰$\ell^+\ell^-$ (where $\ell$ is an electron or muon) helps test models that violate lepton flavor universality. This complementary measurement provides crucial information for interpreting results from the neutrino-related KL decays in terms of new physics models.

Terminology

Summary

KL → π0νν¯ is a golden mode for flavour physics: it is highly suppressed in the Standard Model, with a predicted branching ratio of 3 × 10−11 and a theoretical uncertainty of just 2%, and is therefore extremely sensitive to new physics

The KOTO Experiment

The KOTO experiment at J-PARC is searching for this decay The current best upper limit on its branching ratio is 2.2 × 10−9 at 90% C.L., obtained with KOTO data taken in 2021 A next-generation experiment, KOTO II, was proposed in 2024 with the goal of observing the decay with more than 5σ significance in the 2030s at the SM value of the branching ratio

Experimental Setup and Data Collection

The experimental apparatus involves a 30 GeV proton beam from the J-PARC main ring extracted for 2 s every 5.2 s towards the gold target The KL flux, with a momentum distribution peaking at 1. p. 14 GeV/c, was measured to be 2. p. 11 × 10−7 KL’s per proton on target (POT) The KOTO detector includes a 2 m diameter cylindrical electromagnetic calorimeter (CSI) with 2716 undoped CsI crystals

Background Estimation and Sensitivity

The total number of background events in the signal region was estimated to be 0.252±0.055stat+0.052−0.067 syst The single event sensitivity (SES) on the 2021 data was estimated to be (9. p. 533±0.06stat±0.84syst)×10−10 The major contributions to the SES uncertainties were from kinematic cuts for KL → 2π0(KL → π0νν¯) (3. p. 55%), shape-related cuts (4. p. 52%), and normalization modes inconsistency (3. p. 55%)

Future Goals for KOTO II

KOTO II is planned to collect tens of signal events, aiming at the measurement of the KL → π0νν¯ branching ratio through the observation of the decay A running time of 3 × 107 s with a 100 kW beam is considered for KOTO II The expected number of signal events in 3 × 107 s of running, assuming the SM BR(KL → π0νν¯) ≃ 3 × 10−11, is 35 A total of 40 background events is expected, giving a signal-to-background ratio (S/B) of 0.89 KOTO II's second phase will extend the program to KL → π0l+l−

Measurement of Lepton Flavor Violation

A measurement of the KL → π0l+l− decay rate with 25% precision would provide crucial complementary information for the interpretation of the K → πνν¯ measurements in terms of NP models with lepton flavour universality (LFU) violation The second phase of KOTO II will optimize the detector setup with the addition of charged-particle tracking

Conclusion and Approval

KOTO II has received J-PARC Stage-1 approval; the collaboration has been formed, R&D is finalizing the detector design, and a TDR towards Stage-2 approval is in preparation The extension of the Hadron Experimental Facility will enable the realization of KOTO II, and its funding is being actively pursued The experiment aims to reach SES < 10−10 in 3-4 years

References

A. J. Buras, Eur. Phys. J. C 83, 66 (2023)

M Saito et al., Phys. Rev. Accel. Beams 25, 063001 (2022)

T Shimogawa, Nucl. Instr. Meth. Phys. Res., Sect A 623, 585 (2010)

T Matsumura et al, Nucl. Instr. Meth. Phys. Res., Sect A 885, 91 (2018)

K Sato et al, Nucl. Instr. Meth. Phys. Res., Sect A 982, 164527 (2020)

D Naito et al, Prog Theor Exp Phys 2016, 023C01 (2016)

R Murayama et al, Nucl. Instr. Meth. Phys. Res., Sect A 953, 163255 (2020)

Y Tajima et al, Nucl. Instr. Meth. Phys. Res., Sect A 592, 261 (2008)

T Matsumura et al, Nucl. Instr. Meth. Phys. Res., Sect A 795, 19 (2015)

Y Maeda et al, Prog Theor Exp Phys 2015, 063H01 (2015)

M Osugi, J. Instrum. 15, C05067 (2019)

H M Kim, J. Phys Conf Ser 1526, 012032 (2020)

R Shiraishi, J. Phys Conf Ser 2446, 012051 (2023)

J K Ahn et al, Phys Rev Lett 134, 081802 (2025)

Particle Data Group, Prog Theor Exp Phys 2022, 083C01 (2022)

R D Cousins et al, Nucl. Instr. Meth. Phys. Res., Sect A 320, 331 (1992)

KOTO Collaboration, J Fry et al., arXiv:2501. p. 0

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Improved event reconstruction algorithms can precisely reconstruct photon energy and position from clusters of adjacent crystals, which is crucial for identifying KL to pi 0 nu nu bar decays as stated in The photon energy and position in CSI were reconstructed from a cluster of adjacent crystals with deposited energies larger than 3 MeV.

  2. Enhanced background suppression techniques, such as using a convolutional neural network and Fourier frequency analysis on cluster and pulse shapes, can be applied to suppress the hadron-cluster background by exploiting the timing difference between MPPC and PMT readout.

  3. The system can perform high-precision sensitivity calculations for rare decays by incorporating detailed acceptance corrections derived from Monte Carlo simulations for every selection criterion, as suggested by The single event sensitivity (SES) was obtained from Eq. 1: SES = 1 / Asig Anorm · BR(KL → 2pi0) Nnorm.

  4. The AI system can predict the expected upper limit on a branching ratio with high statistical precision by simulating the full signal and background distribution in the Pt vs Zvtx plane, as shown in Figure 7.

  5. The system can optimize detector design parameters for next-generation experiments by modeling how changes like a 5 degree KL production angle affect KL flux and momentum spectrum, as discussed in The KL production angle is 5 degrees at KOTO II instead of 16 degrees at KOTO, chosen to obtain a larger KL flux and a harder KL momentum spectrum while limiting the neutron fraction.

  6. The AI system can evaluate the feasibility of new detector technologies by modeling background reduction effects, such as how a finely segmented calorimeter can provide an angular resolution of 1-3 degrees for photons, which is expected to substantially reduce the backgrounds induced by wrongly reconstructed decay vertices.

Sources

Related papers