Interacting Boson System at Finite Temperatures: The treatment of the lattice QCD results

arXiv:2611.06697 · nucl-th · Submitted 2026-11-04 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Nuclear Theory. The day in nuclear theory: structure, reactions and the models behind them.

Kai: I'm Kai.

Mira: And I'm Mira, here with Lev.

Kai: We're looking at the paper: "Interacting Boson System at Finite Temperatures".

Mira: Here's the gist of the paper. Interacting relativistic systems of charged bosons at finite temperature and fixed isospin density are studied using a thermodynamically consistent mean-field approach to compare against lattice QCD results.

Kai: The paper investigates how repulsive phi4 and phi6 self-interactions generate a density-dependent effective mass and excess pressure, leading to the selection of the better model for describing lattice data.

Mira: Thermodynamic Framework The thermodynamics are formulated within the Extended Canonical Ensemble (ECE), which is derived from the grand canonical description via a Legendre transformation from the isospin chemical potential to the conserved isospin density.

Kai: In this ECE, for purely repulsive interactions, the chemical potential in the condensed phase is constrained by Bose-condensation condition as µI = M(σ), where M(σ) is determined self-consistently by the scalar density.

Title and authors: Mira: So, what’s the main point of this paper about the "Interacting Boson System at Finite Temperatures: The treatment of the lattice QCD results"? It’s essentially trying to bridge that gap between theoretical models and what we actually measure in those high-density, high-temperature regimes in QCD.

Kai: Yeah. They use a mean field approach with repulsive phi four and phi six self interactions to see how they generate a density dependent effective mass for the bosonic quasiparticles.

Lev: That means they're not just looking at an ideal gas; the interactions are modifying how the particles behave, which is where things get complicated on real systems.

Mira: And they frame this using the Extended Canonical Ensemble, which comes from taking a Legendre transformation from that isospin chemical potential to the conserved isospin density. That’s a specific way to handle these systems when you fix the density instead of fixing the chemical potential directly.

Kai: It sounds like they are setting up a framework where they can compare their results against lattice data by looking at pressure, energy density, and trace anomaly.

Lev: If we were running this on hardware, we'd have to worry about how stable that mean field approximation is across the thermal-to-condensed transition when the chemical potential is constrained by the Bose condensation condition.

Mira: Right. They are also clarifying a key difference in convention for those isospin chemical potentials used for pions versus quarks, which they say is important for making a consistent comparison with lattice QCD results.

The paper's summary: Kai: So, summarizing the paper, they formulate a self-consistent description of the thermal and Bose condensed phases of an interacting relativistic boson system at a fixed isospin density.

Mira: They apply this to a pion-like system and use it to test two specific mean field models: one with phi four interactions and one with phi six interactions.

Lev: So, the goal isn't just to get an equation of state; it’s to see which interaction gives us a better description of what the lattice simulations actually found for things like pressure and energy density.

Kai: They investigate pressure, isospin density, energy density, and trace anomaly specifically to determine which interaction provides a more adequate description of the lattice results.

Mira: The paper finds that both models reproduce the main features of the lattice data at temperature one hundred twenty MeV. But when they compare them systematically, they conclude that the phi six interaction provides a better description for those lattice calculations.

Lev: That’s interesting because it suggests that even at these relatively low hadron temperatures, the vast majority of quark configurations reflect pion structure with equal up and down quarks, meaning nd equals nu and nu bar equals nd.

Kai: So they use the Extended Canonical Ensemble to treat systems across the thermal-to-condensed transition where the chemical potential is constrained by Bose condensation. This gives them a consistent way to look at both phases simultaneously.

The paper's improvements: Mira: One improvement they suggest is making sure they are treating the effective mass correctly, which they do by defining it as M of sigma plus U of sigma for both interactions.

Kai: They also define the excess pressure Pex of sigma plus the derivative of that excess pressure with respect to sigma, which helps characterize how density changes affect the system.

Lev: From an engineering standpoint, that density dependent effective mass is critical because it means the quasiparticle mass itself isn't a constant; it depends on how dense you are.

Mira: And they introduce a specific way to normalize the isospin chemical potential by clarifying the difference between conventions, specifically using µ lat I equals one over two of µ u minus µ d for lattice calculations versus a convention that leads to the ideal pion gas condensation condition of µ I equals m pi <ref:2611.06697#pg1>.

Kai: That normalization step is important because it sets up how they compare their results with the lattice data which uses one specific convention.

Lev: If we were building an error correction system, this would be like having to adjust your gates for every different type of particle interaction; you have to account for those different physical realities.

Conclusion: Kai: So, wrapping up the paper "Interacting Boson System at Finite Temperatures: The treatment of the lattice QCD results", it confirms that both the phi four and phi six models reproduce the main behavior of pressure, isospin density, energy density, and trace anomaly in lattice QCD data at temperature one hundred twenty MeV.

Mira: But when they compare them, they find that the phi six model describes better those lattice calculations. This suggests that at hadron temperatures around one hundred twenty MeV and the considered isospin densities, most quark configurations reflect pion structure with equal up and down quarks.

Lev: From my side, it's interesting because this phenomenological model works well enough to suggest that for these specific conditions, we can use an interacting boson model as an effective description of finite isospin hadronic matter across the Bose condensation transition.

Kai: So they used the Extended Canonical Ensemble to treat systems across the thermal-to-condensed transition where the chemical potential is constrained by Bose condensation.

Mira: That’s right, and their success suggests that these types of interacting pion-like models are a good way to describe what's happening when you have finite isospin density in hot, dense matter.

Lev: We have to remember that this whole thing relies on the assumption that the interactions are repulsive phi four and phi six self-interactions, which is what they modeled.

Kai: So, the final word on "Interacting Boson System at Finite Temperatures: The treatment of the lattice QCD results" is that it’s a strong case for using this type of thermodynamically consistent interacting-boson model to describe finite isospin hadronic matter.

D. Anchishkin, V. Gnatovskyy, D. Zhuravel, V. Karpenko

Bogolyubov Institute for Theoretical Physics

nucl-th

Submitted: 2026-11-04

Updated: 2026-11-04

Comments: 21 pages, 12 figures, LaTeX

License: http://creativecommons.org/licenses/by/4.0/

Importance score: 77/100

The gist: Interacting relativistic systems of charged bosons at finite temperature and fixed isospin density are studied using a thermodynamically consistent mean-field approach to compare against lattice QCD…

Key concepts

Extended Canonical Ensemble (ECE)
This is a thermodynamic framework used to describe systems where the conserved quantity is the isospin density rather than the chemical potential. It's essential for treating systems across phase transitions, like when bosons condense, by constraining the chemical potential based on Bose-condensation conditions.
Mean-Field Approximation
This method simplifies complex many-body interactions by assuming each particle interacts with an average field created by all other particles. This allows researchers to calculate density-dependent properties like effective mass and excess pressure, which are crucial for modeling the system's behavior.
Isospin Chemical Potential Conventions
The paper clarifies that different conventions exist for isospin chemical potentials used in lattice QCD versus particle models. Understanding the difference between conventions, such as $\mu_I = m_{\pi}/2$ and $\mu_I = m_{\pi}$, is vital for correctly comparing theoretical predictions with experimental lattice data.
Effective Mass and Excess Pressure
The repulsive self-interactions ($\\phi^4$ or $\\phi^6$) generate a density-dependent effective mass ($M(\sigma)$) for the bosons. This mass, along with the excess pressure ($P_{ex}(\sigma)$), are key parameters derived from the mean-field model that determine how the system responds to changes in density.

Terminology

Summary

Interacting relativistic systems of charged bosons at finite temperature and fixed isospin density are studied using a thermodynamically consistent mean-field approach to compare against lattice QCD results. p. 0

Where the paper says it

Zhuravel,1 and V. Karpenko1 1Bogolyubov Institute for Theoretical Physics, 03143 Kyiv, Ukraine Abstract We study an interacting relativistic system of charged bosons at finite temperature and fixed isospin density within a thermodynamically consistent mean-field approach.

The paper investigates how repulsive phi4 and phi6 self-interactions generate a density-dependent effective mass and excess pressure, leading to the selection of the better model for describing lattice data. p. 1
Where the paper says it

A thermodynamically consistent mean-field treatment of interacting scalar bosons with repulsive self-interactions was developed in Refs. In this approach the interaction generates a scalar-density dependent effective mass and an excess-pressure contribution, whose relation guarantees thermodynamic consistency.

Thermodynamic Framework

The thermodynamics are formulated within the Extended Canonical Ensemble (ECE), which is derived from the grand canonical description via a Legendre transformation from the isospin chemical potential to the conserved isospin density. In this ECE, for purely repulsive interactions, the chemical potential in the condensed phase is constrained by Bose-condensation condition as µI = M(σ), where M(σ) is determined self-consistently by the scalar density. p. 0

Where the paper says it

We formulate the thermodynamics in the Extended Canonical Ensemble, obtained from the grand canonical description by a Legendre transformation from the isospin chemical potential to the conserved isospin density. In the condensed phase the chemical potential is constrained by the Bosecondensation condition and is therefore determined self-consistently through the effective mass.

The free energy in this ensemble is given by F(T, NI, V) = NIµI (T, nI) − T ln Tr n e −β[H−µI (T,nI)NˆI]o. p. 8
Where the paper says it

From now on, the statistical operator ˆρ and the corresponding partition function in the ECE are defined as ρˆ = e −β[HMF−µI (T,nI )Nˆ I ] , Z(T, nI ) = Tr ˆρ . (39) And in place of the connection between the partition function and the free energy in the Canonical Ensemble, F = −T ln Tr e −βH, in the Extended Canonical Ensemble in accordance with transformation (38) the free energy is given by F(T, NI , V ) = NIµI (T, nI ) − T ln Tr n e −β[H−µI (T,nI )Nˆ I ] o , (40) where µI = µI (T, nI ) is solution of eq.

Mean-Field Approximation

The interaction is represented by repulsive phi4 and phi6 self-interactions which generate a density-dependent effective mass of the bosonic quasiparticles. The mean-field approximation defines the Lagrangian density as LMF = L0 + LMFint, leading to an effective mass M(σ) = m2 + U(σ) and an excess pressure Pex(σ) = Lint(σ) − σ∂Lint(σ)/∂σ. p. 3

Where the paper says it

Following this procedure we define Lint(ˆσ) ≈ LMF int (ˆσ) = Lint(σ) + ∂Lint(σ) ∂σ (ˆσ − σ), (6) where ˆσ = ϕˆ† (x)ϕˆ(x) is the operator of the scalar density. The mean-field approximation Let us consider the mean-field (MF) Lagrangian density L ≈ LMF = L0 + L MF int , (7) where L0 is defined in eq.

For the two interactions considered, U(σ) = λσ for the phi4 model and U(σ) = bσ squared for the phi6 model. p. 4
Where the paper says it

easy to check that in accordance with definitions (9) and (10) we get the following relation: σ(∂U/∂σ) = ∂Pex/∂σ, which is a necessary attribute to provide the thermodynamic consistency of the model. For the two interactions considered here, U(σ) = λσ for the φ 4 model and U(σ) = bσ2 for the φ 6 model.

Lattice Comparison and Model Selection

The purpose of this work is to apply the resulting equations of state to finite-isospin lattice-QCD data and compare the performance of the phi4 and phi6 mean-field models. The comparison involves investigating pressure, isospin density, energy density, and trace anomaly to determine which interaction provides a more adequate description of the lattice results. p. 2

Where the paper says it

Second, we apply the resulting equations of state to finite-isospin lattice-QCD data and compare the performance of the φ 4 and φ 6 mean-field models. In particular, we investigate the pressure, isospin density, energy density, and trace anomaly and determine which interaction provides the more adequate description of the lattice results.

Both models reproduce the main features of the lattice data, with the phi6 interaction providing the better description. p. 0
Where the paper says it

With one constant fitted to the lattice pressure, each model reproduces the lattice isospin density, energy density, and trace anomaly. Both the φ 4 and φ 6 models reproduce the main features of the lattice data, with the φ 6 interaction providing the better description.

Isospin Chemical Potential Normalization

A key point is clarifying the relation between isospin chemical-potential conventions used for pion and quark degrees of freedom. The convention adopted in lattice-QCD calculations uses µlatI = 1/2(µu − µd) (2), which corresponds to the physical condensation condition µlatI = mπ/2. p. 2

Where the paper says it

calculations commonly employ instead the convention (see Refs. [6–10]) µ lat I = 1 2 (µu − µd), (2) for which the same physical condensation condition is expressed as µ lat I = mπ/2.

This differs from the convention used for pion degrees of freedom where µI = µu − µd, leading to the ideal pion gas condensation condition of µI = mπ. p. 1
Where the paper says it

For the pion degrees of freedom, consistency of the isospin number and the corresponding chemical potential gives µ (π) I = µ (q) I = µu − µd . (1) With this convention the condensation condition is µI = mπ for an ideal pion gas.

Quark Content Correspondence

The aim in this section is to put in correspondence the definitions of the isospin chemical potentials for pion and quark degrees of freedom. Assuming pions are the lightest entities, it is concluded that µ(q)I = µ(π)I = µI. p. 1

Where the paper says it

At sufficiently high temperature and density, QCD-motivated effective models and lattice simulations predict substantial modifications of hadronic properties associated with chiral symmetry restoration and deconfinement. In the hadronic phase, pions constitute the lightest degrees of freedom and, because they are bosons carrying isospin, their system can undergo Bose–Einstein condensation at sufficiently large isospin density.

The condensation of pions in terms of quark content begins at µ(q)I = mπ. p. 1
Where the paper says it

At sufficiently high temperature and density, QCD-motivated effective models and lattice simulations predict substantial modifications of hadronic properties associated with chiral symmetry restoration and deconfinement. In the hadronic phase, pions constitute the lightest degrees of freedom and, because they are bosons carrying isospin, their system can undergo Bose–Einstein condensation at sufficiently large isospin density.

Conclusion and Findings

The results show that the phi4 and phi6 models reproduce the main behavior of the pressure, isospin density, energy density, and trace anomaly in lattice QCD data at T = 120 MeV. The comparison leads to the conclusion that the phi6 model describes better the results of the lattice calculations. p. 0

Where the paper says it

Using the convention adopted in lattice-QCD calculations, we compare the pressure, isospin density, energy density, and trace anomaly with lattice results at T = 120 MeV. With one constant fitted to the lattice pressure, each model reproduces the lattice isospin density, energy density, and trace anomaly.

This success suggests that at “hadron” temperatures, at least at T = 120 MeV, and at the considered isospin densities, the vast majority of quark configurations reflect pion structure. p. 0
Where the paper says it

We apply the formalism to a pion-like system at finite isospin and clarify the relation between the isospin chemical-potential conventions used for pion and quark degrees of freedom. Using the convention adopted in lattice-QCD calculations, we compare the pressure, isospin density, energy density, and trace anomaly with lattice results at T = 120 MeV.

The study supports the use of a thermodynamically consistent interacting-boson model as an effective description of finite-isospin hadronic matter across the Bose-condensation transition. p. 2
Where the paper says it

The present approach is complementary to it: it is not a systematic low-energy expansion, but a thermodynamically consistent meanfield model with a single interaction constant, applied at finite temperature across the Bosecondensation transition. Another widely used description of hadronic matter is the hadron resonance gas model [13– 15], which includes the full spectrum of hadrons and resonances.

The results are presented in Fig. p. 0
Where the paper says it

Interacting Boson System at Finite Temperatures: The treatment of the lattice QCD results D. Anchishkin,1 V.

4, showing the dependence of pressure, energy density, and trace anomaly at T = 120 MeV on the isospin density nI calculated for phi4 and phi6 models. p. 0
Where the paper says it

We apply the formalism to a pion-like system at finite isospin and clarify the relation between the isospin chemical-potential conventions used for pion and quark degrees of freedom. Using the convention adopted in lattice-QCD calculations, we compare the pressure, isospin density, energy density, and trace anomaly with lattice results at T = 120 MeV.

The red segment of the curve corresponds to the thermal phase and the blue segment to the condensed phase. p. 4
Where the paper says it

For the two interactions considered here, U(σ) = λσ for the φ 4 model and U(σ) = bσ2 for the φ 6 model. The condensed phase In what follows we use the Bogolyubov’s decomposition of the boson field operator [16] ϕˆ = Φ0 + ψˆ with ψˆ = 0 , (11) where Φ0 is the wave function which is responsible for the condensate creation in the system and ψˆ is the field operator that describes the thermal (kinetic) particles.

The calculation of all thermodynamic quantities was carried out using the interaction constants λ ≈ 0. p. 7
Where the paper says it

(33) Note, the C-number contributions to the Hamiltonian (25) and particle-number operator (28) associated with the presence of the condensate do not affect the mean value of some operator Aˆ in comparison with the statistical averaging of this operator in the thermal phase. After calculation of the partition function one can write the thermodynamic potential Ω = −T lnZ(T, µI ; σ) in a homogeneous thermal system and in condensate system, respectively, Ω(T, µI , V ) = Ωth(T, µI , V ) − V Pex(σ), thermal phase (34) Ω(T, µI , V ) = Ncond(M − µI ) + Ωth(T, µI , V ) − V Pex(σ), condensed phase (35) where Ωth(T, µI , V ) = V T Z d 3k (2π) 3 ln 1 − e − ωk(σ)−µI /T + ln 1 − e − ωk(σ)+µI /T .

4934 and bm2π ≈ 0.5673 obtained by fitting the pressure. p. 0
Where the paper says it

The interaction is represented by repulsive φ 4 and φ 6 self-interactions, which generate a density-dependent effective mass of the bosonic quasiparticles. We formulate the thermodynamics in the Extended Canonical Ensemble, obtained from the grand canonical description by a Legendre transformation from the isospin chemical potential to the conserved isospin density.

The results of the calculation at T = 120 MeV of the energy density in the form of ∆ε(T, µI) = ε(T, µI) − ε(T, 0) and trace-anomaly I = ε − 3p = I(T, 0) + ∆I(T, µI) are shown in Fig. p. 0
Where the paper says it

We apply the formalism to a pion-like system at finite isospin and clarify the relation between the isospin chemical-potential conventions used for pion and quark degrees of freedom. Using the convention adopted in lattice-QCD calculations, we compare the pressure, isospin density, energy density, and trace anomaly with lattice results at T = 120 MeV.

2. The agreement is nontrivial because the quantities shown in the different panels are not independently fitted. For parametrization of the pressure, energy density, and trace anomaly, one can use the real physical quantity – isospin density nI. p. 0
Where the paper says it

Using the convention adopted in lattice-QCD calculations, we compare the pressure, isospin density, energy density, and trace anomaly with lattice results at T = 120 MeV. With one constant fitted to the lattice pressure, each model reproduces the lattice isospin density, energy density, and trace anomaly.

The results of the calculation for phi4 and phi6 models are shown in Fig. p. 2
Where the paper says it

Second, we apply the resulting equations of state to finite-isospin lattice-QCD data and compare the performance of the φ 4 and φ 6 mean-field models. In particular, we investigate the pressure, isospin density, energy density, and trace anomaly and determine which interaction provides the more adequate description of the lattice results.

p. 2
Where the paper says it

Second, we apply the resulting equations of state to finite-isospin lattice-QCD data and compare the performance of the φ 4 and φ 6 mean-field models. In particular, we investigate the pressure, isospin density, energy density, and trace anomaly and determine which interaction provides the more adequate description of the lattice results.

4. In this figure the beginning of dependencies on every panel starts from the following values p(T, µI = 0) = p(T, nI = 0) ≈ 8.2 T 4, ε(T, µI = 0) = ε(T, nI = 0) ≈ 25. p. 1
Where the paper says it

For the pion degrees of freedom, consistency of the isospin number and the corresponding chemical potential gives µ (π) I = µ (q) I = µu − µd . (1) With this convention the condensation condition is µI = mπ for an ideal pion gas.

p. 1
Where the paper says it

For the pion degrees of freedom, consistency of the isospin number and the corresponding chemical potential gives µ (π) I = µ (q) I = µu − µd . (1) With this convention the condensation condition is µI = mπ for an ideal pion gas.

8 T 4, I(T, µI = 0) = I(T, nI = 0) ≈ 1. p. 1
Where the paper says it

For the pion degrees of freedom, consistency of the isospin number and the corresponding chemical potential gives µ (π) I = µ (q) I = µu − µd . (1) With this convention the condensation condition is µI = mπ for an ideal pion gas.

2 T 4. The value of the bare mass of particles in both approaches is approximately two times smaller than the pion mass mπ = 135 MeV. p. 8
Where the paper says it

The first equality, i. a zero effective mass of the quasiparticles, cannot be realized for the system with only a repulsion between particles, M2 = m2 + U(σ), where U(σ) ≥ 0, see eq.

The condensation threshold for the phi4 model occurs when µI = mπ/2, which means that at this temperature the effective (thermal) mass M of pions is M(σcr) = 1/2 mπ. p. 2
Where the paper says it

A systematic low-energy description of QCD at finite isospin density is provided by chiral perturbation theory, which predicts the onset of pion condensation and the equation of state close to the threshold at low temperatures [1, 2, 11, 12]. The present approach is complementary to it: it is not a systematic low-energy expansion, but a thermodynamically consistent meanfield model with a single interaction constant, applied at finite temperature across the Bosecondensation transition.

This value of σcr can be found from self-consistent equation (50) when ncond = 0. p. 8
Where the paper says it

the component that carries the positive isospin charge and enters with +µI (for the pion system these are the π + mesons), for which the first equation in (43) is valid, µI = M(σ) in the condensed phase. The latter means that the antiparticles (π − mesons) exist only in the thermal phase for all temperature range, hence, they cannot be found in the condensed phase, i.

The value of the effective mass M = mπ/2 at T = 120 MeV is used in eq. p. 0
Where the paper says it

We apply the formalism to a pion-like system at finite isospin and clarify the relation between the isospin chemical-potential conventions used for pion and quark degrees of freedom. Using the convention adopted in lattice-QCD calculations, we compare the pressure, isospin density, energy density, and trace anomaly with lattice results at T = 120 MeV.

(65) to transform the formula for the numerical calculation of the critical scalar density σcr. p. 7
Where the paper says it

(33) Note, the C-number contributions to the Hamiltonian (25) and particle-number operator (28) associated with the presence of the condensate do not affect the mean value of some operator Aˆ in comparison with the statistical averaging of this operator in the thermal phase. After calculation of the partition function one can write the thermodynamic potential Ω = −T lnZ(T, µI ; σ) in a homogeneous thermal system and in condensate system, respectively, Ω(T, µI , V ) = Ωth(T, µI , V ) − V Pex(σ), thermal phase (34) Ω(T, µI , V ) = Ncond(M − µI ) + Ωth(T, µI , V ) − V Pex(σ), condensed phase (35) where Ωth(T, µI , V ) = V T Z d 3k (2π) 3 ln 1 − e − ωk(σ)−µI /T + ln 1 − e − ωk(σ)+µI /T .

The relations M squared = m2 + U(σ) give a connection between the value of the bare mass m∗ and the interaction constant λ or b, respectively. The condensation threshold for the phi4 model is when µI = M(T, nI), where M is determined from coupled condensate equations. p. 2
Where the paper says it

A systematic low-energy description of QCD at finite isospin density is provided by chiral perturbation theory, which predicts the onset of pion condensation and the equation of state close to the threshold at low temperatures [1, 2, 11, 12]. The present approach is complementary to it: it is not a systematic low-energy expansion, but a thermodynamically consistent meanfield model with a single interaction constant, applied at finite temperature across the Bosecondensation transition.

The condensation threshold for the phi4 model occurs when µI = mπ/2. p. 2
Where the paper says it

A systematic low-energy description of QCD at finite isospin density is provided by chiral perturbation theory, which predicts the onset of pion condensation and the equation of state close to the threshold at low temperatures [1, 2, 11, 12]. The present approach is complementary to it: it is not a systematic low-energy expansion, but a thermodynamically consistent meanfield model with a single interaction constant, applied at finite temperature across the Bosecondensation transition.

The condensation threshold for the phi4 model is when µI = mπ/2. p. 2
Where the paper says it

A systematic low-energy description of QCD at finite isospin density is provided by chiral perturbation theory, which predicts the onset of pion condensation and the equation of state close to the threshold at low temperatures [1, 2, 11, 12]. The present approach is complementary to it: it is not a systematic low-energy expansion, but a thermodynamically consistent meanfield model with a single interaction constant, applied at finite temperature across the Bosecondensation transition.

For purely repulsive interactions, the thermodynamic quantities can be presented as functions of µI, since at fixed temperature the correspondence between nI and µI is one-to-one. p. 9
Where the paper says it

(34) and (35) one can write the Legendre transformation (38) in explicit form for the thermal and condensed phases, respectively: F(T, nI ) = µI nI + Fth(T, nI ) − Pex , (44) F(T, nI ) = M nI + Fth(T, nI ) − Pex , (45) where the thermal (kinetic) contribution is Fth(T, nI ) = T Z d 3k (2π) 3 ln 1 − e − ωk−µI /T + ln 1 − e − ωk+µI /T , (46) where F(T, nI ) = F(T, NI , V )/V is the density of the free energy, and we recall that in the thermal phase µI = µI (T, nI ) and in the condensed phase µI = M(σ(T, nI )). Self-consistent equations For a closed description of the system it is necessary to formulate the self-consistent equations that determine a dependence of the thermodynamic quantities on the free variables T and nI .

The ECE formulation provides a convenient description of the system across the thermal-to-condensed transition and becomes necessary for an ideal gas or in the presence of attraction, where the value of µI does not determine the thermodynamic state uniquely. p. 9
Where the paper says it

(34) and (35) one can write the Legendre transformation (38) in explicit form for the thermal and condensed phases, respectively: F(T, nI ) = µI nI + Fth(T, nI ) − Pex , (44) F(T, nI ) = M nI + Fth(T, nI ) − Pex , (45) where the thermal (kinetic) contribution is Fth(T, nI ) = T Z d 3k (2π) 3 ln 1 − e − ωk−µI /T + ln 1 − e − ωk+µI /T , (46) where F(T, nI ) = F(T, NI , V )/V is the density of the free energy, and we recall that in the thermal phase µI = µI (T, nI ) and in the condensed phase µI = M(σ(T, nI )). Self-consistent equations For a closed description of the system it is necessary to formulate the self-consistent equations that determine a dependence of the thermodynamic quantities on the free variables T and nI .

For calculation of energy density we use eq. p. 7
Where the paper says it

(33) Note, the C-number contributions to the Hamiltonian (25) and particle-number operator (28) associated with the presence of the condensate do not affect the mean value of some operator Aˆ in comparison with the statistical averaging of this operator in the thermal phase. After calculation of the partition function one can write the thermodynamic potential Ω = −T lnZ(T, µI ; σ) in a homogeneous thermal system and in condensate system, respectively, Ω(T, µI , V ) = Ωth(T, µI , V ) − V Pex(σ), thermal phase (34) Ω(T, µI , V ) = Ncond(M − µI ) + Ωth(T, µI , V ) − V Pex(σ), condensed phase (35) where Ωth(T, µI , V ) = V T Z d 3k (2π) 3 ln 1 − e − ωk(σ)−µI /T + ln 1 − e − ωk(σ)+µI /T .

(53) and obtain for both phases ε(T, nI) = Z d 3k (2π) cubed ωk [fBE(ωk, µI) + fBE(ωk, −µI)] − Pex(σ). p. 8
Where the paper says it

(35) for the condensed phases we can rewrite eq. (37) in explicit form nI = ncond + nIth , (41) nIth(T, µI ) = Z d 3k (2π) 3 fBEωk(σ), µI − fBEωk(σ), −µI , (42) where ωk(σ) = q M(σ) 2 + k 2 , M2 = m2 + U(σ) and the Bose-Einstein distribution function is given by fBE (ω, µ) = {exp [(ω − µ)/T] − 1} −1 .

The energy density in the condensed phase is ε(T, nI) = Mncond + Z d 3k (2π) cubed ωk [fBE(ωk, M) + fBE(ωk, −M)] − Pex(σ). p. 8
Where the paper says it

(35) for the condensed phases we can rewrite eq. (37) in explicit form nI = ncond + nIth , (41) nIth(T, µI ) = Z d 3k (2π) 3 fBEωk(σ), µI − fBEωk(σ), −µI , (42) where ωk(σ) = q M(σ) 2 + k 2 , M2 = m2 + U(σ) and the Bose-Einstein distribution function is given by fBE (ω, µ) = {exp [(ω − µ)/T] − 1} −1 .

p. 8
Where the paper says it

(35) for the condensed phases we can rewrite eq. (37) in explicit form nI = ncond + nIth , (41) nIth(T, µI ) = Z d 3k (2π) 3 fBEωk(σ), µI − fBEωk(σ), −µI , (42) where ωk(σ) = q M(σ) 2 + k 2 , M2 = m2 + U(σ) and the Bose-Einstein distribution function is given by fBE (ω, µ) = {exp [(ω − µ)/T] − 1} −1 .

The energy density in the thermal phase is ε(T, nI) = Z d 3k (2π) cubed ωk [fBE(ωk, µI) + fBE(ωk, −µI)] − Pex(σ). p. 9
Where the paper says it

However, in the condensed phase the value of the chemical potential, µI = M(σ), depends on the temperature and the isospin density via a dependence on the scalar density, σ = σ(T, nI ). (34) and (35) one can write the Legendre transformation (38) in explicit form for the thermal and condensed phases, respectively: F(T, nI ) = µI nI + Fth(T, nI ) − Pex , (44) F(T, nI ) = M nI + Fth(T, nI ) − Pex , (45) where the thermal (kinetic) contribution is Fth(T, nI ) = T Z d 3k (2π) 3 ln 1 − e − ωk−µI /T + ln 1 − e − ωk+µI /T , (46) where F(T, nI ) = F(T, NI , V )/V is the density of the free energy, and we recall that in the thermal phase µI = µI (T, nI ) and in the condensed phase µI = M(σ(T, nI )).

p. 9
Where the paper says it

However, in the condensed phase the value of the chemical potential, µI = M(σ), depends on the temperature and the isospin density via a dependence on the scalar density, σ = σ(T, nI ). (34) and (35) one can write the Legendre transformation (38) in explicit form for the thermal and condensed phases, respectively: F(T, nI ) = µI nI + Fth(T, nI ) − Pex , (44) F(T, nI ) = M nI + Fth(T, nI ) − Pex , (45) where the thermal (kinetic) contribution is Fth(T, nI ) = T Z d 3k (2π) 3 ln 1 − e − ωk−µI /T + ln 1 − e − ωk+µI /T , (46) where F(T, nI ) = F(T, NI , V )/V is the density of the free energy, and we recall that in the thermal phase µI = µI (T, nI ) and in the condensed phase µI = M(σ(T, nI )).

The pressure and energy density are related to the free energy density as p = nI µI (T, nI) − F(T, nI), ε = F(T, nI) − T ∂F(T, nI) / ∂T. p. 9
Where the paper says it

However, in the condensed phase the value of the chemical potential, µI = M(σ), depends on the temperature and the isospin density via a dependence on the scalar density, σ = σ(T, nI ). (34) and (35) one can write the Legendre transformation (38) in explicit form for the thermal and condensed phases, respectively: F(T, nI ) = µI nI + Fth(T, nI ) − Pex , (44) F(T, nI ) = M nI + Fth(T, nI ) − Pex , (45) where the thermal (kinetic) contribution is Fth(T, nI ) = T Z d 3k (2π) 3 ln 1 − e − ωk−µI /T + ln 1 − e − ωk+µI /T , (46) where F(T, nI ) = F(T, NI , V )/V is the density of the free energy, and we recall that in the thermal phase µI = µI (T, nI ) and in the condensed phase µI = M(σ(T, nI )).

The pressure in the thermal phase is p(T, nI) = -Fth(T, nI) + Pex(σ), where Fth(T, nI) is given in eq. p. 9
Where the paper says it

However, in the condensed phase the value of the chemical potential, µI = M(σ), depends on the temperature and the isospin density via a dependence on the scalar density, σ = σ(T, nI ). (34) and (35) one can write the Legendre transformation (38) in explicit form for the thermal and condensed phases, respectively: F(T, nI ) = µI nI + Fth(T, nI ) − Pex , (44) F(T, nI ) = M nI + Fth(T, nI ) − Pex , (45) where the thermal (kinetic) contribution is Fth(T, nI ) = T Z d 3k (2π) 3 ln 1 − e − ωk−µI /T + ln 1 − e − ωk+µI /T , (46) where F(T, nI ) = F(T, NI , V )/V is the density of the free energy, and we recall that in the thermal phase µI = µI (T, nI ) and in the condensed phase µI = M(σ(T, nI )).

(46). The energy density in the thermal phase is ε(T, nI) = Z d 3k (2π) cubed ωk [fBE(ωk, µI) + fBE(ωk, −µI)] − Pex(σ). The energy density in the condensed phase is ε(T, nI) = Mncond + Z d 3k (2π) cubed ωk [fBE(ωk, M) + fBE(ωk, −M)] − Pex(σ). The trace anomaly is I = ε - 3p = I(T, 0) + ∆I(T, µI). p. 0
Where the paper says it

We apply the formalism to a pion-like system at finite isospin and clarify the relation between the isospin chemical-potential conventions used for pion and quark degrees of freedom. Using the convention adopted in lattice-QCD calculations, we compare the pressure, isospin density, energy density, and trace anomaly with lattice results at T = 120 MeV.

The condensate itself does not produce an independent kinetic-pressure contribution. p. 9
Where the paper says it

However, in the condensed phase the value of the chemical potential, µI = M(σ), depends on the temperature and the isospin density via a dependence on the scalar density, σ = σ(T, nI ). (34) and (35) one can write the Legendre transformation (38) in explicit form for the thermal and condensed phases, respectively: F(T, nI ) = µI nI + Fth(T, nI ) − Pex , (44) F(T, nI ) = M nI + Fth(T, nI ) − Pex , (45) where the thermal (kinetic) contribution is Fth(T, nI ) = T Z d 3k (2π) 3 ln 1 − e − ωk−µI /T + ln 1 − e − ωk+µI /T , (46) where F(T, nI ) = F(T, NI , V )/V is the density of the free energy, and we recall that in the thermal phase µI = µI (T, nI ) and in the condensed phase µI = M(σ(T, nI )).

The results of the calculation for phi4 and phi6 models are shown in Fig. 4. In this figure the beginning of dependencies on every panel starts from the following values p(T, µI = 0) = p(T, nI = 0) ≈ 8.2 T 4, ε(T, µI = 0) = ε(T, nI = 0) ≈ 25.8 T 4, I(T, µI = 0) ≈ 1. p. 1
Where the paper says it

For the pion degrees of freedom, consistency of the isospin number and the corresponding chemical potential gives µ (π) I = µ (q) I = µu − µd . (1) With this convention the condensation condition is µI = mπ for an ideal pion gas.

2 T 4. The red segment of the each curve corresponds to the thermal phase and the blue segment to the condensed phase. p. 4
Where the paper says it

For the two interactions considered here, U(σ) = λσ for the φ 4 model and U(σ) = bσ2 for the φ 6 model. The condensed phase In what follows we use the Bogolyubov’s decomposition of the boson field operator [16] ϕˆ = Φ0 + ψˆ with ψˆ = 0 , (11) where Φ0 is the wave function which is responsible for the condensate creation in the system and ψˆ is the field operator that describes the thermal (kinetic) particles.

In all figures the red segment of the curve relates to the thermal phase and the blue segment of the curve relates to a condensate. p. 4
Where the paper says it

For the two interactions considered here, U(σ) = λσ for the φ 4 model and U(σ) = bσ2 for the φ 6 model. The condensed phase In what follows we use the Bogolyubov’s decomposition of the boson field operator [16] ϕˆ = Φ0 + ψˆ with ψˆ = 0 , (11) where Φ0 is the wave function which is responsible for the condensate creation in the system and ψˆ is the field operator that describes the thermal (kinetic) particles.

The comparison of two model results leads to conclusion, that the phi6 model describes better the results of lattice calculations. p. 0
Where the paper says it

Using the convention adopted in lattice-QCD calculations, we compare the pressure, isospin density, energy density, and trace anomaly with lattice results at T = 120 MeV. With one constant fitted to the lattice pressure, each model reproduces the lattice isospin density, energy density, and trace anomaly.

At the same time, the success of the presented phenomenological interacting pion-like models suggests that, at “hadron” temperatures, at least at T = 120 MeV, and at the considered isospin densities, the vast majority of quark configurations reflect pion structure with nd¯ = nu and nu¯ = nd. p. 0
Where the paper says it

We apply the formalism to a pion-like system at finite isospin and clarify the relation between the isospin chemical-potential conventions used for pion and quark degrees of freedom. Using the convention adopted in lattice-QCD calculations, we compare the pressure, isospin density, energy density, and trace anomaly with lattice results at T = 120 MeV.

References

[1] D.T. Son and M.A. Stephanov, QCD at Finite Isospin Density, Phys. p. 0

Where the paper says it

We apply the formalism to a pion-like system at finite isospin and clarify the relation between the isospin chemical-potential conventions used for pion and quark degrees of freedom. Using the convention adopted in lattice-QCD calculations, we compare the pressure, isospin density, energy density, and trace anomaly with lattice results at T = 120 MeV.

Rev. Lett. 86, 592 (2001) [DOI: 10.1103/PhysRevLett.86.592]; [arXiv:hep-ph/0005225]

[4] I.N. Mishustin, D.V. Anchishkin, L. p. 0

Where the paper says it

Interacting Boson System at Finite Temperatures: The treatment of the lattice QCD results D. Anchishkin,1 V.

p. 0
Where the paper says it

Interacting Boson System at Finite Temperatures: The treatment of the lattice QCD results D. Anchishkin,1 V.

p. 0
Where the paper says it

Interacting Boson System at Finite Temperatures: The treatment of the lattice QCD results D. Anchishkin,1 V.

p. 0
Where the paper says it

Interacting Boson System at Finite Temperatures: The treatment of the lattice QCD results D. Anchishkin,1 V.

M. Satarov, O.S. Stashko, and H. Stoecker, Condensation of interacting scalar bosons at finite temperatures, Phys Rev C 100 022201(R) (2019) [DOI: 10. p. 1
Where the paper says it

In particular, the interaction modifies the quasiparticle mass and therefore affects simultaneously the particle density, pressure, energy density, and the condition for Bose condensation. A thermodynamically consistent mean-field treatment of interacting scalar bosons with repulsive self-interactions was developed in Refs.

1103/PhysRevC.100.022201]; arXiv: 19-5-9567 [nucl-th]

[5] D. Anchishkin, V. p. 0

Where the paper says it

Interacting Boson System at Finite Temperatures: The treatment of the lattice QCD results D. Anchishkin,1 V.

p. 0
Where the paper says it

Interacting Boson System at Finite Temperatures: The treatment of the lattice QCD results D. Anchishkin,1 V.

p. 0
Where the paper says it

Interacting Boson System at Finite Temperatures: The treatment of the lattice QCD results D. Anchishkin,1 V.

Gnatovskyy, and I. p. 0
Where the paper says it

Anchishkin,1 V. Gnatovskyy,1 D.

p. 0
Where the paper says it

Anchishkin,1 V. Gnatovskyy,1 D.

p. 0
Where the paper says it

Anchishkin,1 V. Gnatovskyy,1 D.

Kondakova, Ideal Boson Particle-Antiparticle System at Finite Temperatures, J Phys G: Nucl Part Phys 52 115002 No. p. 2
Where the paper says it

INTERACTING SCALAR MESONS: THE MEAN-FIELD APPROXIMATION Let us start with the Lagrangian density for scalar-boson charged field ϕˆ(x) L(x) = L0 + Lint = ∂µϕˆ† (x) ∂ µϕˆ(x) − m2 ϕˆ† (x)ϕˆ(x) + Lint , (3) where L0 is a free part of the Lagrangian density. The complex scalar field describes two charged states, a particle and an antiparticle, which for the pion system are identified with π + and π −; the neutral pion, which does not couple to the isospin chemical potential, is not included.

11 (2025) [DOI 10.88/1361-6471/ae-l] arXiv: 2507. p. 0
Where the paper says it

The Extended Canonical Ensemble provides a convenient framework for treating interacting particle-antiparticle systems across the transition to the Bose-condensed phase. Keywords: pion gas, phase transition, condensate, quark degrees of freedom 1 arXiv:2611.

[9] Bastian B. Brandt, Francesca Cuteri and Gergely Endr˝odi, QCD thermodynamics at non-zero isospin asymmetry, PoS LATTICE2021 132 (2022) [DOI: 10.223/396.013] arXiv: 21-10-475 [hep-lat]

[8] B.B. Brandt, G. Endr˝odi, S. Schmalzbauer, QCD phase diagram for nonzero isospin asymmetry, Phys Rev D 97 054514 (2018) [arXiv: 17-12-8] [hep-lat]

[3] D. Toublan, and J. Kogut, Isospin Chemical Potential and the QCD Phase Diagram at Nonzero Temperature and Baryon Chemical Potential (4p) Phys Lett B564 212 (2001) [arXiv:hepph/03-0-183]

[4] I.N. Mishustin, D.V. Anchishkin, L.M. Satarov, O.S. Stashko, and H. Stoecker, Condensation of interacting scalar bosons at finite temperatures Phys Rev C 100 022201(R) (2019) [DOI: 10. p. 1

Where the paper says it

In particular, the interaction modifies the quasiparticle mass and therefore affects simultaneously the particle density, pressure, energy density, and the condition for Bose condensation. A thermodynamically consistent mean-field treatment of interacting scalar bosons with repulsive self-interactions was developed in Refs.

1103/PhysRevC.100.0222] arXiv: 5-9567 [nucl-th]

[5] D. Anchishkin, V. Gnatovskyy, and I. Kondakova, Ideal Boson Particle-Antiparticle System at Finite Temperatures J Phys G: Nucl Part Phys 52 115002 No. p. 2

Where the paper says it

INTERACTING SCALAR MESONS: THE MEAN-FIELD APPROXIMATION Let us start with the Lagrangian density for scalar-boson charged field ϕˆ(x) L(x) = L0 + Lint = ∂µϕˆ† (x) ∂ µϕˆ(x) − m2 ϕˆ† (x)ϕˆ(x) + Lint , (3) where L0 is a free part of the Lagrangian density. The complex scalar field describes two charged states, a particle and an antiparticle, which for the pion system are identified with π + and π −; the neutral pion, which does not couple to the isospin chemical potential, is not included.

11 (2025) [DOI 10.88/136/647] arXiv: 25-7-

[9] B.B. Brandt, F. Cuteri, and Gergely Endr˝odi, QCD thermodynamics at non-zero isospin asymmetry PoS LATTICE2021 132 (2022) [DOI: 10.2-396.0] arXiv:

[8] B.B. Brandt, G. Endr˝odi, S. Schmalzbauer, QCD phase diagram for nonzero isospin-asymmetry Phys Rev D 97 054514 (2018) [arXiv: 17-12-8] [hep-lat]

[3] D. Toublan, and J. Kogut, Isospin Chemical Potential and the QCD Phase Diagram at Nonzero Temperature and Baryon Chemical Potential (4p) Phys Lett B564 212 (2001) [arXiv:hepph/03-0-183]

[4] I.N. Mishustin, D.V. Anchishkin, L.M. Satarov, O.S. Stashko, and H Stoecker Condensation of interacting scalar bosons at finite temperatures Phys Rev C 100 022201(R) (2019) [DOI: 10. p. 1

Where the paper says it

In particular, the interaction modifies the quasiparticle mass and therefore affects simultaneously the particle density, pressure, energy density, and the condition for Bose condensation. A thermodynamically consistent mean-field treatment of interacting scalar bosons with repulsive self-interactions was developed in Refs.

p. 1
Where the paper says it

In particular, the interaction modifies the quasiparticle mass and therefore affects simultaneously the particle density, pressure, energy density, and the condition for Bose condensation. A thermodynamically consistent mean-field treatment of interacting scalar bosons with repulsive self-interactions was developed in Refs.

1-5-9567] arXiv: p. 0
Where the paper says it

The Extended Canonical Ensemble provides a convenient framework for treating interacting particle-antiparticle systems across the transition to the Bose-condensed phase. Keywords: pion gas, phase transition, condensate, quark degrees of freedom 1 arXiv:2611.

[5] D. Anchishkin, V. Gnatovskyy, and I. Kondakova Ideal Boson Particle-Antiparticle System at Finite Temperatures J Phys G: Nucl Part Phys 52 115002 No. p. 2

Where the paper says it

INTERACTING SCALAR MESONS: THE MEAN-FIELD APPROXIMATION Let us start with the Lagrangian density for scalar-boson charged field ϕˆ(x) L(x) = L0 + Lint = ∂µϕˆ† (x) ∂ µϕˆ(x) − m2 ϕˆ† (x)ϕˆ(x) + Lint , (3) where L0 is a free part of the Lagrangian density. The complex scalar field describes two charged states, a particle and an antiparticle, which for the pion system are identified with π + and π −; the neutral pion, which does not couple to the isospin chemical potential, is not included.

11 (2025) [DOI 10.88/136/647] arXiv:

[9] B.B. Brandt, F Cuteri, and Gergely Endr˝odi QCD thermodynamics at non-zero isospin asymmetry PoS LATTICE2021 132 (2022) [DOI: 10.2-396.0] arXiv:

[8] B.B. Brandt, G Endr˝odi, S Schmalzbauer QCD phase diagram for nonzero isospin-asymmetry Phys Rev D 97 054514 (2018) [arXiv: 17-12-8] [hep-lat]

[3] D. Toublan, and J Kogut Isospin Chemical Potential and the QCD Phase Diagram at Nonzero Temperature and Baryon Chemical Potential (4p) Phys Lett B564 212 (2001) [arXiv:hepph/03-0-183]

[4] I.N. Mishustin, D.V. Anchishkin, L.M. Satarov, O.S. Stashko, and H Stoecker Condensation of interacting scalar bosons at finite temperatures Phys Rev C 100 022201(R) (2019) [DOI: 10.1-5-9567] arXiv:

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Improved AI can perform self-consistent determination of thermodynamic quantities by solving coupled self-consistent equations for scalar density and isospin density in both thermal and condensed phases.

  2. The improved system can accurately predict the critical scalar density sigma cr using equation (65) derived from the condensate creation condition, which links the effective mass M to m pi over two.

  3. The AI can distinguish between different conventions for isospin chemical potentials by explicitly modeling the difference between µI = m pi and µI = m pi / 2, which is crucial for consistent comparison with lattice-QCD data.

  4. The improved system can determine the best interaction model by fitting the lattice pressure to derive interaction constants lambda and b, and then comparing how well each model reproduces pressure, isospin density, energy density, and trace anomaly.

  5. The AI can utilize the Extended Canonical Ensemble formulation to treat systems across the thermal-to-condensed transition where the chemical potential is constrained by Bose condensation.

Abstract

We study an interacting relativistic system of charged bosons at finite temperature and fixed isospin density within a thermodynamically consistent mean-field approach. The interaction is represented by repulsive phi-4 and phi-6 self-interactions, which generate a density-dependent effective mass of the bosonic quasiparticles. We formulate the thermodynamics in the Extended Canonical Ensemble, obtained from the grand canonical description by a Legendre transformation from the isospin chemical potential to the conserved isospin density. In the condensed phase the chemical potential is constrained by the Bose-condensation condition and is therefore determined self-consistently through the effective mass. We apply the formalism to a pion-like system at finite isospin and clarify the relation between the isospin chemical-potential conventions used for pion and quark degrees of freedom. Using the convention adopted in lattice-QCD calculations, we compare the pressure, isospin density, energy density, and trace anomaly with lattice results at T=120 MeV. With one constant fitted to the lattice pressure, each model reproduces the lattice isospin density, energy density, and trace anomaly. Both the phi-4 and phi-6 models reproduce the main features of the lattice data, with the phi-6 interaction providing the better description. The Extended Canonical Ensemble provides a convenient framework for treating interacting particle-antiparticle systems across the transition to the Bose-condensed phase.

Sources

Related papers