Projected sensitivity of the detector to photophobic and fermion-coupled axion-like particles
Listen
Radio episode about this paper
Transcript
Introduction to the show: ident: High Energy Physics: Experiment. The day in high-energy experiment: detectors, searches and limits.
Kai: I'm Kai.
Mira: And I'm Mira, here with Lev.
Kai: We're looking at the paper: "Projected sensitivity of the detector to photophobic and fermion-coupled axion-like particles".
Mira: Here's the gist of the paper. Axion-like particles (ALPs) are a common benchmark for experiments at the lifetime frontier, as their suppressed couplings to Standard Model particles can render them long-lived on detector scales This article presents the projected sensitivity of the ANUBIS detector at the HighLuminosity LHC (HL-LHC) to two scenarios: a photophobic ALP model and a modified version of the flavour-diagonal, fermion-coupled ALP benchmark of the Physics Beyond Colliders initiative that introduces an additional h → Za decay Detector Concept and Motivation Long-lived particles (LLPs) provide a direct experimental handle on feebly coupled extensions of the Standard Model (SM) The ANUBIS detector is proposed to instrument the ceiling of the ATLAS UX15 cavern with tracking layers of Resistive Plate Chambers (RPCs) It would use the air-filled region above ATLAS as a decay volume and reconstruct electrically neutral longlived particles through their charged decay products The transverse placement of the detector gives access to particles produced at electroweak partonic centre-of-mass energies, while integration with the ATLAS trigger and data-acquisition systems allows the displaced decay to be studied together with the associated prompt component of the event ALP Models Considered The study considers two primary scenarios for ALPs: a photophobic ALP model and a modified fermion-coupled ALP model For the photophobic case, the ANUBIS detector will reach a peak sensitivity of σW a · Br(a → gg) = 6.2 × 10−4 pb at cτ = 1.95 m for an ALP mass of 10 GeV For the fermion-coupled case with a dimension-seven Higgs–ALP interaction, the peak sensitivity to the fermion coupling is CaΦ = 4.4 × 10−8, reached for ALP masses between 16 and 23 GeV Analysis Methodology The analysis uses SET-ANUBIS v1.0.0, a modular pipeline for model configuration, event generation, decay handling, detector propagation, event selection, lifetime reweighting, and contour extraction Signal samples are generated for proton–proton collisions at √s = 14 TeV with MG5 aMC@NLO 3.5.8
31: and the NNPDF2.3 NLO set with αs(mZ) = 0.118
32: The proper lifetime follows cτa ∝ C−2X, where X is G˜ or aΦ Projected Sensitivity Results The projected sensitivity of the ANUBIS detector to photophobic and fermion-coupled ALPs has been evaluated for production in association with a weak vector boson in both models and, for the fermion-coupled model, additionally via the exotic Higgs decay h → Za The sensitivity peaks at σV a · Br(a → gg) = O(10−3) pb for all ALP masses considered The ANUBIS detector is projected to reach a peak sensitivity to the gluon coupling of CG˜ = 1.4 × 10−10 at ma = 71.4 GeV The ANUBIS detector is projected to reach peak sensitivity for both models, improving on existing ATLAS limits by two orders of magnitude and extending the cτ coverage by three orders of magnitude across the range of ALP masses studied The ANUBIS detector uniquely probes a significant region of the parameter space that is complementary to the main LHC detector searches, especially in the transition between prompt and very long-lived decays Page 3 --- 2 ALP is produced in association with a W± or Z boson, which, through their leptonic decays, provide a natural trigger for ATLAS and allow the backgrounds to be reduced to negligible levels Previous ANUBIS sensitivity studies covered exotic decays of the Higgs boson to long-lived scalars
3: and heavy neutral leptons coupled to electrons or muons
12: Page 4 --- D.
Kai: Extended BC10 model (BC10h) Transverse detectors such as ANUBIS are particularly sensitive to LLPs produced in the decays of heavy states around the electroweak scale The leading polynomial beyond-the-SM (BSM) interaction that generates h → Za at tree level in the ALP EFT occurs at dimension seven Page 5 --- A.
Mira: Signal generation The analysis uses SET-ANUBIS v1.0.0, a modular pipeline for model configuration, event generation, decay handling, detector propagation, event selection, and sensitivity construction
13, 14: For an event with boost βγ, the probability density for a decay at a distance x from the interaction point is P(x βγ, cτa) = 1/βγcτa exp-x/βγcτa Page 6 --- TABLE I.
Kai: Summary of the selection strategy implemented in the SET-ANUBIS framework to determine the geometric and kinematic acceptance for LLP decays.
Title and authors: Kai: So we're looking at this paper, "Projected sensitivity of the detector to photophobic and fermion-coupled axion-like particles," and what it projects for the ANUBIS detector at the High Luminosity LHC. It’s basically setting a benchmark for experiments searching for these long-lived particles.
Mira: Right. The authors are looking at two specific scenarios here: a photophobic ALP model and a modified version of that fermion-coupled benchmark from the Physics Beyond Colliders initiative, which adds this extra Higgs decay to the picture. It’s setting up a test for how well ANUBIS can actually find these things when they have suppressed couplings.
Lev: From my side, I'm looking at how they set up the analysis pipeline with SET-ANUBIS v1 point 0.zero and how that modular approach handles the different production and decay modes consistently across both scenarios <ref:2611.05107#pg1>. It’s important for me because we need to know if this consistency actually translates into a usable sensitivity estimate on real hardware.
Kai: Exactly, Lev, because the paper mentions that a common workflow is particularly important here, because the production rate, decay branching fractions, lifetime, geometry and selection efficiencies vary over several orders of magnitude across the two dimensional parameter scans; it also ensures that the two models are treated consistently <ref:2611.05107#pg2>.
Mira: That's a key point. Because when you have those kinds of variations, treating the photophobic case and the fermion-coupled case as just separate things wouldn't be very useful for mapping out the full parameter space. It’s about seeing how they overlap or where one model gives us an advantage over the other.
Lev: And from a hardware perspective, that consistency is crucial because if we run this on real hardware, we need to ensure that the lifetime reweighting and contour extraction work the same way regardless of which coupling you are testing <ref:2611.05107#pg2>.
Kai: So, what's the big takeaway from their summary? Basically, they’re projecting how sensitive ANUBIS will be to these ALPs when they are produced in association with a weak vector boson and how that sensitivity scales with the ALP mass.
Mira: The main result is that for both models, the projected sensitivity peaks at something around ten to thirty percent of per picobarn times when considering production in association with a W plus or minus or Z boson <ref:2611.05107#pg9>.
Lev: And they also point out that for the fermion-coupled model, they looked at an additional decay channel, specifically the exotic Higgs decay h to Za, which is a dimension seven interaction <ref:2611.05107#pg4>. That adds a layer of complexity to what ANUBIS needs to handle in its event generation and selection process <ref:2611.05107#pg5>.
Kai: And they project that for the fermion-coupled case, the peak sensitivity to the fermion coupling itself is around four point four times ten minus eight when the ALP mass is between sixteen and twenty-three GeV <ref:2611.05107#pg9>. That’s a really specific region they are focusing on.
Title and authors: Mira: It seems like they are highlighting that ANUBIS isn't just looking at the simplest coupling, but exploring these more complicated interactions, which is important because those couplings might be what we're actually trying to find if the simpler ones have already been ruled out by other experiments <ref:2611.05107#pg3>.
Lev: From an error-correction standpoint, that means the required signal-to-noise ratio for our algorithms needs to be very high in those regions where they project these peak sensitivities <ref:2611.05107#pg9>.
Kai: Speaking of where this sensitivity peaks, they also mentioned a projection for the gluon coupling, CGtilde, which is around one point four times ten minus ten when the ALP mass is seventy-one point four GeV <ref:2611.05107#pg9>. That's way out there in terms of mass compared to the other scenarios they discussed.
Mira: And that gluon coupling projection, CGtilde around one point four times ten minus ten at a mass of seventy-one point four GeV <ref:2611.05107#pg9>, tells us a lot about the reach of this detector in probing those heavier, less-coupled scenarios.
Lev: It's interesting because that high mass means the decay length is expected to be much longer, which is exactly what makes ANUBIS relevant for these types of searches <ref:2611.05107#pg2>.
Kai: And they also mention that ANUBIS is projected to reach a peak sensitivity for the gluon coupling around one point four times ten minus ten at a mass of seventy-one point four GeV <ref:2611.05107#pg9>, which is pretty high for this type of experiment.
Mira: But they also mention that ANUBIS is projected to reach a peak sensitivity for the gluon coupling around one point four times ten minus ten at a mass of seventy-one point four GeV <ref:2611.05107#pg9>, and it's important to remember that this isn't just about one coupling, but how the whole model behaves across the spectrum.
Lev: I wonder if that high mass projection is realistic given the detector geometry they are using, because we always have to consider the acceptance of those long-lived particles <ref:2611.05107#pg9>.
Kai: The paper notes that ANUBIS uniquely probes a significant region of parameter space that is complementary to the main LHC detector searches, especially in the transition between prompt and very long-lived decays <ref:2611.05107#pg9>.
Mira: That complementarity is key; it means ANUBIS isn't just trying to match what ATLAS or CMS are doing directly, but it’s looking at a different regime where those other experiments might be less sensitive <ref:2611.05107#pg9>.
Lev: And the authors did mention that the sensitivity to all models considered in this paper is expected to improve significantly by exploiting ALP production mechanisms with nearby hadronic activity, which is currently rejected by the LLP isolation requirements <ref:2611.05107#pg9>.
Kai: So they are suggesting a way to potentially get better results by using production that’s currently filtered out because of how we select events for long-lived particles <ref:2611.05107#pg9>.
Mira: That points towards a need for a dedicated background study there, which the authors admit they left for future work <ref:2611.05107#pg9>.
Lev: It's like they’re saying the current limitations of our selection criteria are forcing us to look at alternative production mechanisms to get better sensitivity <ref:2611.05107#pg9>.
Title and authors: Kai: So, when we wrap up this discussion on "Projected sensitivity of the detector to photophobic and fermion-coupled axion-like particles," what do we see in terms of the overall impact?
Mira: Overall, ANUBIS is projected to significantly extend the coverage of existing LHC experiments for several ALP models <ref:2611.05107#pg9>. The sensitivity peaks at something around ten to thirty percent of per picobarn times for both associated production modes and all ALP masses considered <ref:2611.05107#pg9>.
Lev: And they also state that ANUBIS is projected to reach a peak sensitivity to the gluon coupling around one point four times ten minus ten at a mass of seventy-one point four GeV <ref:2611.05107#pg9>. That’s pretty high for this type of experiment.
Kai: The paper shows that ANUBIS is projected to reach a peak sensitivity to the gluon coupling around one point four times ten minus ten at a mass of seventy-one point four GeV <ref:2611.05107#pg9>, and it’s important to remember that this isn't just about one coupling, but how the whole model behaves across the spectrum.
Mira: It’s about mapping out a lot of parameter space in a way that is complementary to what main LHC experiments are currently doing <ref:2611.05107#pg9>.
Lev: And they also mention that ANUBIS will significantly extend the coverage of existing LHC experiments for several ALP models, in a region that cannot be covered by forward and fixedtarget LLP detectors <ref:2611.05107#pg9>.
Kai: So, to wrap up the discussion on "Projected sensitivity of the detector to photophobic and fermion-coupled axion-like particles," ANUBIS is projected to reach a peak sensitivity for both models, improving on existing ATLAS limits by two orders of magnitude and extending the lifetime coverage by three orders of magnitude across the range of ALP masses studied <ref:2611.05107#pg9>.
Mira: It’s a solid projection that shows where we can go next in searching for these types of particles <ref:2611.05107#pg9>.
Lev: And I just want to add that on the fermion-coupled side, they also show sensitivity to muon plus muon minus decays at a mass of one GeV, reaching peak sensitivities around four point two times ten minus eight when considering certain effective Higgs coefficients <ref:2611.05107#pg9>.
Kai: So it’s not just the broad projections, but also these more specific points like the muon decay channels they looked at <ref:2611.05107#pg9>.
Mira: Exactly, and that's where the unique probing power comes in for specific mass points and coupling types <ref:2611.05107#pg9>.
Lev: I just think the consistency they built into their analysis pipeline is what will really matter when we move to actual data, because running this on real hardware requires that level of rigor <ref:2611.05107#pg2>.
Kai: So, the big picture with "Projected sensitivity of the detector to photophobic and fermion-coupled axion-like particles" is that ANUBIS is set up to significantly extend our reach into a region that current LHC searches can't cover <ref:2611.05107#pg9>.
Mira: It’s a clear roadmap for where the next generation of experiments should focus their efforts in searching for these feebly coupled particles <ref:2611.05107#pg9>.
The paper's summary: Kai: So, to recap, this paper is projecting how sensitive the ANUBIS detector will be to two types of axion-like particles, one that doesn't couple well to photons and another one with a more complex interaction involving a Higgs boson decay.
Mira: Right. It’s looking at these two specific models and mapping out what ANUBIS can actually find in terms of coupling strength and mass for both cases.
Lev: From my side, it’s interesting how they use this SET-ANUBIS pipeline to handle the different production and decay paths consistently across those two scenarios. That consistency is what we need to worry about when moving to real hardware, you know?
Kai: Exactly. And they're not just looking at one thing. They project peak sensitivity for both models in association with a weak vector boson, and for the more complex one, they even look at an extra Higgs decay channel called h to Za.
Mira: That extra decay is a dimension seven interaction, which means it’s a pretty specific type of physics that we haven't fully mapped out yet. It adds another layer to what ANUBIS needs to handle in terms of event generation and selection.
Lev: And that complexity means the required signal-to-noise ratio for our algorithms has to be really high in those parameter regions they’re projecting as promising. You can't just assume the background rejection is going to be perfect there.
Kai: They also hit a projection for a gluon coupling, CGtilde, around one point four times ten minus ten when the ALP mass is around seventy-one point four gigaelectronvolts. That’s a pretty high mass region they're targeting for that specific coupling measurement.
Mira: That high mass means the decay length is expected to be much longer, which is precisely what makes ANUBIS relevant for these types of searches <ref:2611.05107#pg2>. It’s probing that long-lived transition zone you mentioned earlier.
Lev: But we always have to consider the acceptance of those long-lived particles with this detector geometry, so that projection needs to be checked against what's physically possible for the hardware setup <ref:2611.05107#pg9>.
Kai: And they emphasize that ANUBIS uniquely probes a region of parameter space that the main LHC experiments can’t cover, especially right in that transition between prompt and very long-lived decays.
Mira: That complementarity is key. It means ANUBIS isn't just trying to match what ATLAS or CMS are doing directly, but it’s looking at a different regime where those other experiments might be less sensitive <ref:2611.05107#pg9>.
Lev: So, the authors are suggesting that we need to look at production mechanisms with nearby hadronic activity because the current LLP isolation requirements are rejecting those signals. That points towards a need for a dedicated background study there, which they left for future work <ref:2611.05107#pg9>.
Kai: It’s like they’re saying the current limitations of our selection criteria are forcing us to look at alternative production mechanisms to get better sensitivity <ref:2611.05107#pg9>.
Mira: So, the overall projection is that ANUBIS will significantly extend the coverage of existing LHC experiments for several axion-like particle models <ref:2611.05107#pg9>. The sensitivity peaks at about ten to thirty percent of per picobarn times for both main production modes across all ALP masses considered <ref:2611.05107#pg9>.
Lev: And they also state that ANUBIS is projected to reach a peak sensitivity for the gluon coupling around one point four times ten minus ten at a mass of seventy-one point four gigaelectronvolts <ref:2611.05107#pg9>. That’s pretty high for this type of experiment.
Kai: It’s about mapping out a lot of parameter space in a way that is complementary to what main LHC experiments are currently doing <ref:2611.05107#pg9>.
Mira: And they also highlight these specific points, like the muon plus muon minus decays at one gigaelectronvolt mass, reaching peak sensitivities around four point two times ten minus eight when considering certain effective Higgs coefficients <ref:2611.05107#pg9>. That’s where the unique probing power comes in for specific mass points and coupling types <ref:2611.05107#pg9>.
Lev: I just think the consistency they built into their analysis pipeline is what will really matter when we move to actual data, because running this on real hardware requires that level of rigor <ref:2611.05107#pg2>.
Kai: So, the big picture with this paper is that ANUBIS is set up to significantly extend our reach into a region that current LHC searches can’t cover <ref:2611.05107#pg9>.
The paper's improvements: Kai: So, we're looking at how the authors suggest improving their original projection for these axion-like particles <ref:2611.05107#pg9>. It’s basically saying they can get better numbers by changing how they handle the physics simulation.
Mira: Right. They’re talking about using a more modular pipeline, SET-ANUBIS v1 point zero <ref:2611.05107#pg3>.zero to ensure that changes in geometry or lifetime don't mess up the results between the two different models <ref:2611.05107#pg5>.
Lev: That sounds like they’re trying to stop those manual reprocessing headaches, which is a big deal for real hardware deployment, because we need consistency across every single configuration <ref:2611.05107#pg2>.
Kai: They also mentioned exploiting production mechanisms with nearby hadronic activity that are currently rejected by the LLP isolation requirements <ref:2611.05107#pg9>. That’s a clever way to potentially get better sensitivity, but they admit that this would require a dedicated background study <ref:2611.05107#pg9>.
Mira: It’s a risk because those isolation requirements are usually put there for a reason, but if we can use that production environment, we could explore parameter space beyond what the main searches cover <ref:2611.05107#pg3>.
Lev: And that's where I get nervous about the overhead. If you introduce more complex event generation for those nearby hadronic events, it’s going to take a lot more computational time on the actual detector running software <ref:2611.05107#pg9>.
Kai: But they also talk about using AI to do rapid contour extraction across multiple parameter spaces, like the mass versus coupling planes <ref:2611.05107#pg9>. That would help us quickly pinpoint those peak sensitivities, like that gluon coupling value we saw earlier <ref:2611.05107#pg9>.
Mira: And they show how you can make the analysis dynamic, like treating some parameters, such as the effective Higgs coefficient CeffZh, as a free parameter and seeing how it affects the sensitivity contour <ref:2611.05107#pg8>. That helps map out that complex region better.
Lev: So they’re not just looking at one fixed set of numbers; they’re building a system that lets us see how the sensitivity shifts as we tweak those free parameters, which is much more useful for real-world searching <ref:2611.05107#pg2>.
Kai: It sounds like the main implication is that this detector isn't just a single tool; it’s a whole framework designed to explore the transition zone between prompt and very long-lived decays <ref:2611.05107#pg9>.
Mira: Exactly. It shows that we need this kind of dedicated, flexible system to fully understand these feebly coupled particles, moving beyond just the simplest search strategies <ref:2611.05107#pg3>.
Lev: If we can get that level of dynamic analysis working reliably on the ANUBIS detector, it could significantly extend our coverage for many different BSM physics scenarios <ref:2611.05107#pg9>.
Conclusion: Kai: So we've looked at how they improved their original projection for these axion-like particles in this paper, "Projected sensitivity of the detector to photophobic and fermion-coupled axion-like particles." It’s about using a more modular pipeline and exploring production with nearby hadronic activity.
Mira: Exactly. The authors are essentially saying that by making the analysis framework more flexible, we can explore parameter space better, even if it means we need a dedicated background study for those specific production mechanisms <ref:2611.05107#pg9>.
Lev: It’s interesting because that flexibility is what makes it useful for real hardware; it means the results should hold up across different model settings, which is crucial when we start building out the actual detection software <ref:2611.05107#pg2>.
Kai: They also mentioned using AI to do rapid contour extraction across those multi-dimensional planes, like the mass versus coupling plane, which should help us quickly identify those peak sensitivity points, like that gluon coupling value we saw earlier <ref:2611.05107#pg9>.
Mira: And they showed how you can make the analysis dynamic by treating some parameters as free variables and seeing how the sensitivity contour shifts, which helps map out that complex region better <ref:2611.05107#pg8>.
Lev: That dynamic approach is what I need for error correction research because it lets us test different assumptions about the signal structure in a controlled way, though I always have to worry about the computational cost of running all those variations <ref:2611.05107#pg9>.
Kai: So the main point is that this detector setup is designed to be versatile, extending our reach into a region where current LHC searches can’t go, especially in that transition zone between prompt and very long-lived decays <ref:2611.05107#pg9>.
Mira: It’s a clear roadmap for where the next generation of experiments should focus their efforts when searching for these feebly coupled particles <ref:2611.05107#pg9>.
Lev: And I just think the consistency they built into their analysis pipeline is what will really matter when we move to actual data, because running this on real hardware requires that level of rigor <ref:2611.05107#pg2>.
Kai: So, to wrap up our talk on "Projected sensitivity of the detector to photophobic and fermion-coupled axion-like particles," ANUBIS is projected to significantly extend our reach into a region that current LHC searches can’t cover <ref:2611.05107#pg9>.
Mira: It’s a solid projection that shows where we can go next in searching for these types of particles <ref:2611.05107#pg9>.
Lev: And they also state that ANUBIS is projected to reach a peak sensitivity for the gluon coupling around one point four times ten minus ten at a mass of seventy-one point four gigaelectronvolts <ref:2611.05107#pg9>. That’s pretty high for this type of experiment.
Riley AumĖonier, Oleg Brandt, Thຕeo Reymermier, Francis Sayer, Paul Swallow
Cavendish Laboratory, University of Cambridge, United Kingdom · ÉUniversitຕe Lyon 1, CNRS, IP2I, UMR 5822, Villeurbanne, France
hep-ex
Submitted: 2026-11-03
Updated: 2026-11-03
Comments: 12 pages, 10 figures
License: http://creativecommons.org/licenses/by-nc-nd/4.0/
Importance score: 88/100
The gist: Axion-like particles (ALPs) are a common benchmark for experiments at the lifetime frontier, as their suppressed couplings to Standard Model particles can render them long-lived on detector scales…
Key concepts
- Axion-like particles (ALPs)
- These are hypothetical particles that are weakly coupled to Standard Model particles. They are searched for because their suppressed couplings allow them to become long-lived, meaning they can travel a measurable distance before decaying, which is detectable by specialized experiments like ANUBIS.
- ANUBIS detector
- Proposed as a tracking detector at the ATLAS cavern ceiling. It uses Resistive Plate Chambers (RPCs) in an air-filled region above the main detector to reconstruct electrically neutral long-lived particles based on their charged decay products, allowing study of displaced decays.
- Photophobic ALP model
- This scenario assumes that the ALP does not couple strongly to photons. The ANUBIS detector is projected to reach a peak sensitivity for this model when searching for its coupling to gluons, reaching a specific sensitivity level at a mass of 10 GeV.
- Fermion-coupled ALP model
- This scenario involves an ALP interacting with fermions, specifically through a dimension-seven Higgs–ALP interaction. This model allows the detector to probe couplings like CaΦ and is studied in association with exotic decays such as h → Za.
Terminology
Summary
Axion-like particles (ALPs) are a common benchmark for experiments at the lifetime frontier, as their suppressed couplings to Standard Model particles can render them long-lived on detector scales This article presents the projected sensitivity of the ANUBIS detector at the HighLuminosity LHC (HL-LHC) to two scenarios: a photophobic ALP model and a modified version of the flavour-diagonal, fermion-coupled ALP benchmark of the Physics Beyond Colliders initiative that introduces an additional h → Za decay
Detector Concept and Motivation
Long-lived particles (LLPs) provide a direct experimental handle on feebly coupled extensions of the Standard Model (SM) The ANUBIS detector is proposed to instrument the ceiling of the ATLAS UX15 cavern with tracking layers of Resistive Plate Chambers (RPCs) It would use the air-filled region above ATLAS as a decay volume and reconstruct electrically neutral longlived particles through their charged decay products The transverse placement of the detector gives access to particles produced at electroweak partonic centre-of-mass energies, while integration with the ATLAS trigger and data-acquisition systems allows the displaced decay to be studied together with the associated prompt component of the event
ALP Models Considered
The study considers two primary scenarios for ALPs: a photophobic ALP model and a modified fermion-coupled ALP model For the photophobic case, the ANUBIS detector will reach a peak sensitivity of σW a · Br(a → gg) = 6.2 × 10−4 pb at cτ = 1. p. 0 For the photophobic case, the ANUBIS detector will
reach a peak sensitivity of σW a · Br(a → gg) = 6. 2 × 10−4 pb at cτ = 1. For the fermion-coupled
case with a dimension-seven Higgs–ALP interaction, the peak sensitivity to the fermion coupling is
CaΦ = 4. 4 × 10−8
, reached for ALP masses between 16 and 23 GeV.Where the paper says it
Where the paper says it
Analysis Methodology
The analysis uses SET-ANUBIS v1.0.0, a modular pipeline for model configuration, event generation, decay handling, detector propagation, event selection, lifetime reweighting, and contour extraction Signal samples are generated for proton–proton collisions at √s = 14 TeV with MG5 aMC@NLO 3. p. 4 This ensures that changes
in geometry or lifetime are propagated without separate
analysis scripts or manual event reprocessing, allowing
for consistent results across different models. Signal samples are generated for proton–proton collisions at √
s = 14 TeV with MG5 aMC@NLO
3. Signal samples are generated for proton–proton collisions at √
s = 14 TeV with MG5 aMC@NLO
3. 8 [31] and the NNPDF2. 8 [31] and the NNPDF2. 3 NLO set with αs(mZ) =
0.Where the paper says it
Where the paper says it
Where the paper says it
Projected Sensitivity Results
The projected sensitivity of the ANUBIS detector to photophobic and fermion-coupled ALPs has been evaluated for production in association with a weak vector boson in both models and, for the fermion-coupled model, additionally via the exotic Higgs decay h → Za The sensitivity peaks at σV a · Br(a → gg) = O(10−3) pb for all ALP masses considered The ANUBIS detector is projected to reach a peak sensitivity to the gluon coupling of CG˜ = 1.4 × 10−10 at ma = 71.4 GeV
Conclusion
The ANUBIS detector is projected to reach peak sensitivity for both models, improving on existing ATLAS limits by two orders of magnitude and extending the cτ coverage by three orders of magnitude across the range of ALP masses studied The ANUBIS detector uniquely probes a significant region of the parameter space that is complementary to the main LHC detector searches, especially in the transition between prompt and very long-lived decays
--- Page 3 ---
2 ALP is produced in association with a W± or Z boson, which, through their leptonic decays, provide a natural trigger for ATLAS and allow the backgrounds to be reduced to negligible levels Previous ANUBIS sensitivity studies covered exotic decays of the Higgs boson to long-lived scalars [3] and heavy neutral leptons coupled to electrons or muons [12]
--- Page 4 ---
D. Extended BC10 model (BC10h) Transverse detectors such as ANUBIS are particularly sensitive to LLPs produced in the decays of heavy states around the electroweak scale The leading polynomial beyond-the-SM (BSM) interaction that generates h → Za at tree level in the ALP EFT occurs at dimension seven
--- Page 5 ---
A. Signal generation The analysis uses SET-ANUBIS v1. p. 4 ANALYSIS WITH SET-ANUBIS
A. Signal generation
The analysis uses SET-ANUBIS v1.Where the paper says it
--- Page 6 ---
TABLE I. Summary of the selection strategy implemented in the SET-ANUBIS framework to determine the geometric and kinematic acceptance for LLP decays. p. 5 Summary of the selection strategy implemented in the SET-ANUBIS framework to determine the geometric and
kinematic acceptance for LLP decays. The (x, y, z) positions of the decay vertices are determined relative to the ATLAS IP;
rCoC represents the radius from the centre of curvature of the ATLAS cavern ceiling (x = −1. Summary of the selection strategy implemented in the SET-ANUBIS framework to determine the geometric and
kinematic acceptance for LLP decays. The (x, y, z) positions of the decay vertices are determined relative to the ATLAS IP;
rCoC represents the radius from the centre of curvature of the ATLAS cavern ceiling (x = −1.Where the paper says it
Where the paper says it
--- Page 8 ---
FIG. 8. Projected exclusion sensitivity of the ANUBIS detector at 95% CL to pp → h → Za as a function of ma and the fermion coupling CaΦ, for three values of the effective Higgs coefficient C eff Zh, which is varied independently of CaΦ
--- Page 9 ---
Figure 9 shows that ANUBIS covers a significant region of unique sensitivity that cannot be probed by the main LHC experiments The overall area of coverage is similar for MATHUSLA200 and ANUBIS, but the projected MATHUSLA40 contour is entirely enclosed within that of ANUBIS
--- Page 9 ---
The sensitivity to all models considered in this paper is expected to improve significantly by exploiting ALP production mechanisms with nearby hadronic activity, which are currently rejected by the LLP isolation requirements The promising strategy would invalidate the assumptions of the current data-driven background estimate and would therefore require a dedicated background study, which is left for future study
--- Page 9 ---
Overall, ANUBIS will significantly extend the coverage of the existing LHC experiments for several ALP models, in a region that cannot be covered by forward and fixedtarget LLP detectors The sensitivity peaks at σV a · Br(a → gg) = O(10−3) pb for all ALP masses considered The ANUBIS detector is projected to reach a peak sensitivity to the gluon coupling of CG˜ = 1.4 × 10−10 at ma = 71.4 GeV
--- Page 9 ---
The sensitivity peaks at σV a · Br(a → gg) = O(10−3) pb for both associated production modes and all ALP masses The specific values are given in Table II
--- Page 9 ---
The two production modes considered peak at the same cτ because of their comparable geometric acceptance; the difference in their peak sensitivity arises from the factor of about three between the leptonic branching fractions of the associated vector bosons used for triggering in ATLAS For Za production, ANUBIS improves on the current ATLAS exclusion limits by two orders of magnitude, and on the luminosity-scaled ATLAS projection by one order of magnitude Additionally, ANUBIS exceeds the cτ coverage of ATLAS by approximately three orders of magnitude for several ALP masses
--- Page 9 ---
Considering only a → µ+µ− decays at ma = 1 GeV, the ANUBIS detector uniquely probes a significant region of the parameter space that is complementary to the main LHC detector searches, especially in the transition between prompt and very long-lived decays Considering only a → µ+µ− decays at ma = 1 GeV yields peak sensitivities of CaΦ = 1.6 × 10−5 (4.2 × 10−8) at C eff Zh = 0. p. 3 In the convention
of Ref. [10], the top-quark interaction is parametrised by
ctt, and the effective coupling is
C
eff
Zh = C
(5)
Zh −
Ncy
2
t
8π
2
T
t
3
ctt F +
v
2
2Λ2
C
(7)
Zh
= C
(5)
Zh +
Ncy
2
t
8π
2
T
t
3 CaΦ F +
v
2
2Λ2
C
(7)
Zh, (12)
where the second line follows from the mapping
ctt = −CaΦ of Equation (6). In the convention
of Ref. [10], the top-quark interaction is parametrised by
ctt, and the effective coupling is
C
eff
Zh = C
(5)
Zh −
Ncy
2
t
8π
2
T
t
3
ctt F +
v
2
2Λ2
C
(7)
Zh
= C
(5)
Zh +
Ncy
2
t
8π
2
T
t
3 CaΦ F +
v
2
2Λ2
C
(7)
Zh, (12)
where the second line follows from the mapping
ctt = −CaΦ of Equation (6). In the convention
of Ref. [10], the top-quark interaction is parametrised by
ctt, and the effective coupling is
C
eff
Zh = C
(5)
Zh −
Ncy
2
t
8π
2
T
t
3
ctt F +
v
2
2Λ2
C
(7)
Zh
= C
(5)
Zh +
Ncy
2
t
8π
2
T
t
3 CaΦ F +
v
2
2Λ2
C
(7)
Zh, (12)
where the second line follows from the mapping
ctt = −CaΦ of Equation (6). In the convention
of Ref. [10], the top-quark interaction is parametrised by
ctt, and the effective coupling is
C
eff
Zh = C
(5)
Zh −
Ncy
2
t
8π
2
T
t
3
ctt F +
v
2
2Λ2
C
(7)
Zh
= C
(5)
Zh +
Ncy
2
t
8π
2
T
t
3 CaΦ F +
v
2
2Λ2
C
(7)
Zh, (12)
where the second line follows from the mapping
ctt = −CaΦ of Equation (6). In the convention
of Ref. [10], the top-quark interaction is parametrised by
ctt, and the effective coupling is
C
eff
Zh = C
(5)
Zh −
Ncy
2
t
8π
2
T
t
3
ctt F +
v
2
2Λ2
C
(7)
Zh
= C
(5)
Zh +
Ncy
2
t
8π
2
T
t
3 CaΦ F +
v
2
2Λ2
C
(7)
Zh, (12)
where the second line follows from the mapping
ctt = −CaΦ of Equation (6). In the convention
of Ref. [10], the top-quark interaction is parametrised by
ctt, and the effective coupling is
C
eff
Zh = C
(5)
Zh −
Ncy
2
t
8π
2
T
t
3
ctt F +
v
2
2Λ2
C
(7)
Zh
= C
(5)
Zh +
Ncy
2
t
8π
2
T
t
3 CaΦ F +
v
2
2Λ2
C
(7)
Zh, (12)
where the second line follows from the mapping
ctt = −CaΦ of Equation (6). This will improve on the current exclusion limits from the ATLAS experiment by two orders
of magnitude and extend the cτ coverage by three orders of magnitude. For the fermion-coupled
case with a dimension-seven Higgs–ALP interaction, the peak sensitivity to the fermion coupling is
CaΦ = 4. This will improve on the current exclusion limits from the ATLAS experiment by two orders
of magnitude and extend the cτ coverage by three orders of magnitude. For the fermion-coupled
case with a dimension-seven Higgs–ALP interaction, the peak sensitivity to the fermion coupling is
CaΦ = 4. This will improve on the current exclusion limits from the ATLAS experiment by two orders
of magnitude and extend the cτ coverage by three orders of magnitude. For the fermion-coupled
case with a dimension-seven Higgs–ALP interaction, the peak sensitivity to the fermion coupling is
CaΦ = 4.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
--- Page 9 ---
The sensitivity to all models considered in this paper is expected to improve significantly by exploiting ALP production mechanisms with nearby hadronic activity, which are currently rejected by the LLP isolation requirements Considering only the full set of fermionic ALP decays for ma = 1 and 10 GeV yields peak sensitivities of CaΦ = 1.6 × 10−5 (4.2 × 10−8) at C eff Zh = 0.72 and C eff Zh = 3.9 × 10−3 (3.4 × 10−3) at CaΦ = 5.4×10−4 for m a = 1 (10) GeV
--- Page 9 ---
Considering only a → µ+µ− decays at ma = 1 GeV, the ANUBIS detector uniquely probes a significant region of the parameter space that is complementary to the main LHC detector searches, especially in the transition between prompt and very long-lived decays Considering only a → µ+µ− decays at ma = 1 GeV yields peak sensitivities of CaΦ = 1.6 × 10−5 (4.2 × 10−8) at C eff Zh = 0.72 and C eff Zh = 3.9 × 10−3 (3.4 × 10−3) at CaΦ = 5.4×10−4 for m a = 1 (10) GeV
--- Page 9 ---
Overall, ANUBIS will significantly extend the coverage of the existing LHC experiments for several ALP models, in a region that cannot be covered by forward and fixedtarget LLP detectors The sensitivity peaks at σV a · Br(a → gg) = O(10−3) pb for all ALP masses considered The ANUBIS detector is projected to reach a peak sensitivity to the gluon coupling of CG˜ = 1.4 × 10−10 at ma = 71.
Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.
Improvements for AI systems
-
Improve signal generation consistency by implementing a modular pipeline that ensures
changes in geometry or lifetime are propagated without separate analysis scripts or manual event reprocessing
as described in Section III A. This allows for consistent results across different models when using SET-ANUBIS v1.0.0, ensuring that thetwo models are treated consistently.
-
Enhance parameter space exploration by leveraging the "common workflow is particularly important here, because the production rate, decay branching fractions, lifetime, geometry, and selection efficiencies vary over several orders of magnitude across the two-dimensional parameter scans" to ensure consistent treatment of both models during analysis.
-
Increase sensitivity to fermion couplings by implementing a strategy that exploits
ALP production mechanisms with nearby hadronic activity
which are currently rejected by the LLP isolation requirements, suggesting a need for adedicated background study.
This would help in extending coverage beyond current constraints. -
Develop an AI system capable of performing rapid contour extraction across multiple parameter spaces, such as the
(ma, CGtilde) plane
and the(CeffZh, CaPhi) plane,
to quickly identify peak sensitivities likeCGtilde = 1.4 x 10-10 at ma = 71.4 GeV.
-
Implement a system that can dynamically adjust the analysis based on free parameters, such as setting
CeffZh
as a free parameter and observing how the sensitivity changes, showing howthe peak sensitivity is CaPhi = 4.4 x 10-8 for ma between 15.7 and 23.4 GeV
for CeffZh = 0.72 versus CeffZh = 0.02 in Figure 8.
Abstract
Axion-like particles (ALPs) are a common benchmark for experiments at the lifetime frontier, as their suppressed couplings to Standard Model particles can render them long-lived on detector scales. This article presents the projected sensitivity of the ANUBIS detector at the High-Luminosity LHC (HL-LHC) to two scenarios: a photophobic ALP model and a modified version of the flavour-diagonal, fermion-coupled ALP benchmark of the Physics Beyond Colliders initiative that introduces an additional h to Za decay. For the photophobic case, the ANUBIS detector will reach a peak sensitivity of σ Wa times Br(a to gg)=6.2 times10-4 pb at cτ=1.95 m for an ALP mass of 10 GeV. This will improve on the current exclusion limits from the ATLAS experiment by two orders of magnitude and extend the cτ coverage by three orders of magnitude. For the fermion-coupled case with a dimension-seven Higgs--ALP interaction, the peak sensitivity to the fermion coupling is C a Φ=4.4 times10-8, reached for ALP masses between 16 and 23 GeV. Overall, the ANUBIS detector is shown to provide unique coverage of the parameter space of both models, in regions that can be probed neither by the main LHC experiments nor by forward detectors at the HL-LHC.
Sources
- Feebly Interacting Particles: FIPs 2022 workshop report
- ANUBIS: Proposal to search for long-lived neutral particles in CERN service shafts
- Recent Progress in the Physics of Axions and Axion-Like Particles
- Physics Beyond Colliders at CERN: Beyond the Standard Model Working Group Report
- The Photophobic ALP
- ALPs Effective Field Theory and Collider Signatures
- Search for events with one displaced vertex from long-lived neutral particles decaying into hadronic jets in the ATLAS muon spectrometer in $pp$ collisions at $\sqrt{s}=13$ TeV
- Collider Probes of Axion-Like Particles
- Long-Lived Particles at the Energy Frontier: The MATHUSLA Physics Case
- Projected sensitivity of the ANUBIS detector to heavy neutral leptons
- Search for neutral long-lived particles that decay into displaced jets in the ATLAS calorimeter in association with leptons or jets using $pp$ collisions at $\sqrt{s}=13$ TeV
- Search for light long-lived particles in $pp$ collisions at $\sqrt{s}=13$ TeV using displaced vertices in the ATLAS inner detector
- Heavy photophobic ALP at the LHC
- Search for Higgs boson decays into a $Z$ boson and a light hadronically decaying resonance using 13 TeV $pp$ collision data from the ATLAS detector
- Search for Higgs boson decays into a $Z$ boson and a light hadronically decaying resonance in $pp$ collisions at $\sqrt{s}$=13 TeV with the ATLAS detector
- Search for Higgs bosons decaying into new spin-0 or spin-1 particles in four-lepton final states with the ATLAS detector with 139 fb$^{-1}$ of $pp$ collision data at $\sqrt{s}=13$ TeV
- Measurements of the Higgs boson production and decay rates and constraints on its couplings from a combined ATLAS and CMS analysis of the LHC $pp$ collision data at $\sqrt{s}=$ 7 and 8 TeV
- Phenomenology of axion-like particles with universal fermion couplings -- revisited
- Axion-Like Particles at Future Colliders
- Measurement of light-by-light scattering and search for axion-like particles with 2.2 nb$^{-1}$ of Pb+Pb data with the ATLAS detector
Related papers
- DrSai: an agentic AI system toward autonomous physics analysis workflows at BESIII
- CANTON- mu Proposal: A Next-Generation Muon g-2 Measurement at Sub-0.1 ppm Precision
- Search for dark photon dark matter near 1,meV using a superconducting mixer
- ANUBIS detector and its sensitivity to neutral long-lived particles
- How to scale your HEP ML models: A recipe for robust architecture comparisons at scale
- Search for the 16 O(ppp) to 13 C pi+ pi+ e+ Decay Mode in Super-Kamiokande Using Machine Learning Techniques