Measurement of the V cb element of the CKM matrix using t t bar events in pp collisions at sqrt s = 13 TeV
Listen
Radio episode about this paper
Transcript
Introduction to the show: ident: High Energy Physics: Experiment. The day in high-energy experiment: detectors, searches and limits.
Kai: We're looking at the paper: "Measurement of the V cb element of the CKM matrix using t t bar events in pp collisions at sqrt s = 13 TeV".
Mira: Here's the gist of the paper. A measurement of the magnitude of the Cabibbo–Kobayashi–Maskawa matrix element V cb is presented using top quark pair events produced in proton-proton collisions at sqrt s = 13 TeV, utilizing data from CMS collected over an integrated luminosity of 138 fb-1 between 2016 and 2018.
Kai: The analysis focuses on the lepton+jets final state, where one W boson decays leptonically to serve as a trigger, and the other decays hadronically.
Mira: The extraction of V cb is derived from the branching fraction of the W to cb decay mode.
Kai: To isolate this rare signal against dominant backgrounds such as W to ud and W to cs, a multivariate discriminant is employed, primarily leveraging b-jet tagging information from the jets associated with the hadronic W boson decay.
Title and authors: Kai: Let's talk about the title and who wrote this paper, "Measurement of the V cb element of the CKM matrix using t t bar events in pp collisions at sqrt s = thirteen TeV" <ref:2611.01274#pg1,element of the CKM matrix using>. It sets up exactly what they did.
Mira: The authors are presenting a measurement that uses top quark pair events produced in proton-proton collisions at thirteen tera electron volts as their primary data source.
Lev: That’s significant because it shifts the focus from B meson decays to something else entirely, which is always interesting for checking the standard model.
Kai: Exactly. It’s using a different production mechanism—top quarks—to get an estimate for that matrix element Vcb.
Mira: The title clearly signals that this is a determination of Vcb using top quark pair events at thirteen tera electron volts, which is the energy scale they are probing.
Lev: It tells us they aren't relying on the old methods with B decays, but rather on the properties of top quarks in these high-energy collisions.
Kai: And it’s important because it offers a way to get an independent constraint on Vcb at the electroweak scale, which is a different energy regime than where B meson decays are usually studied.
Mira: It provides a complementary determination, meaning if they get a value here, it should ideally align with what we see from other sources.
The paper's summary: Kai: So the summary of this paper says they focus on the lepton plus jets final state where one W boson decays leptonically to serve as a trigger and the other decays hadronically.
Mira: They are extracting Vcb from that branching fraction, specifically for the W to cb decay mode.
Lev: They have to be really careful about separating that signal from backgrounds like W to ud and W to cs, which are much more dominant processes in those collisions.
Kai: To isolate this signal, they use a multivariate discriminant based mainly on the b jet tagging information from the jets coming from the hadronic W boson decay.
Mira: That's smart. It leverages that heavy-flavor information to cut through the noise from those other hadronic W decays.
Lev: From an engineering standpoint, that means they’re relying heavily on how well we can identify those b jets in a complex event environment at the LHC.
Kai: The results they report are for Vcb being four point five nine plus zero point four four minus zero point forty eight statistical and systematic uncertainties, which is about forty-five point nine plus four point four minus zero point four eight stat plus zero point six four minus zero point seven six syst times ten to the power of negative two, or around five times ten to the negative two for the value itself >
Mira: And they point out that this measurement gives them independence from the nonperturbative quantum chromodynamics inputs that are usually needed for measurements based on semileptonic B meson decays.
Lev: That’s a big deal because it lets us test the standard model at a different level of theory input, which is what we need.
The paper's improvements: Kai: Now let's talk about the improvements they suggest for this analysis. They are proposing using an AI system to improve their classification method.
Mira: Specifically, they suggest training a TabNet algorithm with balanced weights for multiclass classification into seven categories instead of weighting classes by their expected yields.
Lev: That makes sense if you want better stability in the training and maximize the sensitivity of the classifier across all those different signal and background types.
Kai: They also suggest a simultaneous binned maximum likelihood fit using both the single-lepton region and a dilepton control region to constrain nuisance parameters better.
Mira: That allows them to use those constraints across regions, which gives them more direct sensitivity to the tt plus heavy flavor backgrounds that are tricky.
Lev: And they also suggest implementing dynamic rescaling of background processes based on CKM unitarity constraints during the fit, so the tt background processes are therefore rescaled dynamically in the fit.
Kai: That’s interesting because it keeps the sum of branching fractions consistent with unity while conserving the total inclusive top quark cross section.
Conclusion: Mira: So wrapping up this paper, they conclude that the measured signal strength is r equals one point two seven plus zero point four six minus zero point four four, which corresponds directly to their reported value for Vcb.
Kai: They emphasize that systematic uncertainties are quite significant, and they are dominated by the modeling of top quark production with additional heavy flavor jets and flavor-tagging uncertainties.
Lev: That tells us that if we want to get higher precision here, we need better theoretical models for those extra heavy flavor jets, because that’s where the main uncertainty is landing.
Kai: This measurement’s precision is currently lower than what you can get from semileptonic B meson decays, but it still gives us an independent determination of Vcb at the electroweak scale.
Mira: It’s a useful tool for probing those long-standing Vcb discrepancies that have been floating around in the literature.
Lev: I think this work sets a benchmark for how we use top quark events to probe these fundamental parameters, and it gives us something to compare against when we try to get better constraints from real hardware.
CMS Collaboration
European Organization for Nuclear Research (CERN)
hep-ex
Submitted: 2026-10-31
Updated: 2026-10-31
Comments: Submitted to the Journal of High Energy Physics. All figures and tables can be found at http://cms-results.web.cern.ch/cms-results/public-results/publications/TOP-26-001 (CMS Public Pages)
License: http://creativecommons.org/licenses/by/4.0/
Importance score: 76/100
The gist: A measurement of the magnitude of the Cabibbo–Kobayashi–Maskawa matrix element V cb is presented using top quark pair events produced in proton-proton collisions at sqrt s = 13 TeV…
Key concepts
- |Vcb|
- This is a specific parameter in the CKM matrix that describes the strength of the transition involving a charm quark and a bottom quark. Measuring its magnitude helps test our understanding of how quarks mix within the Standard Model.
- Top Quark Pair Events (tt)
- These are events where two top quarks are produced in proton-proton collisions. These events are rich sources for studying on-shell W bosons, which is crucial for this measurement because the W boson decays directly into charm and bottom quarks.
- Multivariate Discriminant
- This is a sophisticated statistical tool, like a smart filter, used to separate the rare signal of interest ($W o cb$) from overwhelming background noise. It uses various jet properties and b-jet tagging information to identify the desired decay mode with high accuracy.
Terminology
Summary
A measurement of the magnitude of the Cabibbo–Kobayashi–Maskawa matrix element V cb is presented using top quark pair events produced in proton-proton collisions at sqrt s = 13 TeV, utilizing data from CMS collected over an integrated luminosity of 138 fb-1 between 2016 and 2018. p. 0 EUROPEAN ORGANIZATION FOR NUCLEAR RESEARCH (CERN)
CERN-EP-2026-274
2026/11/03
CMS-TOP-26-001
Measurement of the |Vcb| element of the CKM matrix using
tt events in pp collisions at √
s = 13 TeV
The CMS Collaboration*
Abstract
A measurement of the magnitude of the Cabibbo–Kobayashi–Maskawa matrix element Vcb is presented using top quark pair events produced in proton-proton collisions at √
s = 13 TeV. The data correspond to an integrated luminosity of 138 fb−1
collected by the CMS experiment at the LHC. At the LHC, tt production serves as a copious source of on-shell W bosons. We target the lepton+jets final state, where one W boson decays leptonically to trigger the event
and suppress backgrounds, while the other decays hadronically, providing the signal probe. To produce signal samples
that are kinematically consistent with this background, we force the W → cb branching fraction
to 100%, while maintaining the same generator settings and tuning as those used for the tt
background simulation. This ensures that any observed differences in the measurement are
not due to inconsistencies in the underlying simulation frameworks, allowing for a reliable
extraction of |Vcb |. The
value of |Vcb | is extracted from the branching fraction of the W → cb decay. To
identify this rare signal amid the dominant W → ud and W → cs backgrounds,
a multivariate discriminant based primarily on the b jet tagging information of
the jets assigned to the hadronic W boson decay is used. To
identify this rare signal amid the dominant W → ud and W → cs backgrounds,
a multivariate discriminant based primarily on the b jet tagging information of
the jets assigned to the hadronic W boson decay is used. The measured value is
|Vcb | = [4. The measured value is
|Vcb | = [4. 48 (stat)+0. 48 (stat)+0. 76 (syst)] × 10−2
. 76 (syst)] × 10−2
. This measurement provides a complementary determination of |Vcb | at the electroweak scale, independent of the nonperturbative quantum chromodynamics inputs used in measurements based on semileptonic
B meson decays.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
The methodology builds upon prior strategies and refines them using top quark pair (tt) events as a copious source of on-shell W bosons at the LHC. p. 2 The measurement is performed using tt events collected by the CMS experiment. At the LHC, tt production serves as a copious source of on-shell W bosons. 76 (syst)] × 10−2
. This measurement provides a complementary determination of |Vcb | at the electroweak scale, independent of the nonperturbative quantum chromodynamics inputs used in measurements based on semileptonic
B meson decays. In hadronic W boson decays, the leading-order partial width to each quark-pair final state is
proportional to the squared magnitude of the corresponding CKM matrix element, with corrections from finite quark masses and higher-order QCD and electroweak effects. The measurement determines |Vcb | from the relative rate of W → cb to the other hadronic W boson
decay modes, primarily W → ud and W → cs, with smaller contributions from W → us
and W → cd. 2
cause |Vub | is roughly an order of magnitude smaller than |Vcb |, making its expected rate much
smaller than the experimental sensitivity. To identify the rare signal amid the other hadronic W
boson decay backgrounds, we employ a multivariate analysis strategy. To identify the rare signal amid the other hadronic W
boson decay backgrounds, we employ a multivariate analysis strategy. This includes a boosted
decision tree (BDT) for the reconstruction of the tt system and a deep neural network discriminant that exploits heavy-flavor (HF) jet properties to isolate the signal. With an inverted p
miss
T
requirement, transfer factors are derived from the ratio of yields satisfying the nominal and inverted lepton selections, after subtraction of the simulated non-QCD contributions. The factors
are determined as functions of the lepton pT
separately for each data-taking era and are applied
to QCD-enriched samples satisfying the nominal p
miss
T
requirement, again after subtraction of
the simulated non-QCD contributions, to predict the QCD multijet background in the nominal
selection. The
value of |Vcb | is extracted from the branching fraction of the W → cb decay. To
identify this rare signal amid the dominant W → ud and W → cs backgrounds,
a multivariate discriminant based primarily on the b jet tagging information of
the jets assigned to the hadronic W boson decay is used. To
identify this rare signal amid the dominant W → ud and W → cs backgrounds,
a multivariate discriminant based primarily on the b jet tagging information of
the jets assigned to the hadronic W boson decay is used. The measured value is
|Vcb | = [4. Using a distinct muon-in-jet charm-tagging technique, a related
CMS measurement determined the inclusive fraction of hadronic W boson decays containing
a c quark in tt events to be 0. A measurement of |Vcb | in tt decays has recently been reported by the ATLAS Collaboration using its proton-proton (pp) collision data
set collected at √
s = 13 TeV, yielding |Vcb | = [5. For the nominal modeling of tt events with additional b-flavored jets, a dedicated NLO ttbb
prediction is used. These samples are generated at NLO in QCD using the four-flavor scheme
(4FS) with POWHEG-BOX-RES [42, 43] and OPENLOOPS [44], explicitly incorporating additional
b quarks at the matrix element (ME) level.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.
Improvements for AI systems
-
Multivariate Discriminant Construction: The AI system can be improved by using a TabNet algorithm trained with balanced weights for multiclass classification into seven categories, rather than weighting classes according to expected yields, to ensure training stability and maximize sensitivity as stated in
We therefore train the multiclass classifier with approximately balanced training weights.
-
Simultaneous Likelihood Fitting: The AI system should be capable of performing a simultaneous binned maximum likelihood fit using both the single-lepton region and the dilepton control region, allowing nuisance parameters to be constrained across regions to provide direct sensitivity to tt+HF backgrounds.
-
CKM Unitarity Constraints: The system can implement dynamic rescaling of background processes based on CKM unitarity constraints, where
the tt background processes are therefore rescaled dynamically in the fit,
ensuring the sum of branching fractions remains consistent with unity while conserving the total inclusive tt cross section. -
Modeling Uncertainty Propagation: The AI system should accurately propagate systematic uncertainties using nuisance parameters treated as multiplicative scale variations following a log-normal distribution for rate uncertainties and polynomial interpolation with Gaussian variations for shape uncertainties, as detailed in Section 7.1.
-
Jet Flavor Tagging Calibration: The system must incorporate data-to-simulation scale factors derived separately for each data-taking era to correct the full distribution of the DEEPJET b tagging discriminant, accounting for both tagging efficiency and discriminant shape uncertainties.
-
Kinematic Variable Selection: The system should prioritize input features such as
Jet flavor
(DEEPJET B scores),Reconstruction fidelity,
andSuppression of HF radiation
when constructing the DW->cb discriminant, as these are identified as the most important inputs by the TabNet model.
Abstract
A measurement of the magnitude of the Cabibbo - Kobayashi - Maskawa matrix element V cb is presented using top quark pair events produced in proton-proton collisions at sqrt s = 13 TeV. The data correspond to an integrated luminosity of 138 fb-1 collected by the CMS experiment at the LHC. The measurement targets the lepton+jets final state, where one W boson decays leptonically and the other hadronically. The value of V cb is extracted from the branching fraction of the W to cb decay. To identify this rare signal amid the dominant W to ud and W to cs backgrounds, a multivariate discriminant based primarily on the b jet tagging information of the jets assigned to the hadronic W boson decay is used. The measured value is V cb = [4.59+0.44-0.48 (stat) 0.64-0.76 (syst)] times 10-2. This measurement provides a complementary determination of V cb at the electroweak scale, independent of the nonperturbative quantum chromodynamics inputs used in measurements based on semileptonic B meson decays.
Sources
- Three loop calculations and inclusive $V_{cb}$
- First extraction of inclusive $V_{cb}$ from $q^2$ moments
- Extraction of form Factors from a Four-Dimensional Angular Analysis of $\overline{B} \rightarrow D^\ast \ell^- \overline{\nu}_\ell$
- Determination of $|V_{cb}|$ using $\overline{B}^0\to D^{*+}\ell^-\bar\nu_\ell$ decays with Belle II
- Measurement of Angular Coefficients of $\bar{B} \to D^* \ell \bar{\nu}_\ell$: Implications for $|V_{cb}|$ and Tests of Lepton Flavor Universality
- Measurement of |V_cb| and the Form-Factor Slope in Bbar -> D l- nubar Decays in Events Tagged by a Fully Reconstructed B Meson
- Measurement of the decay $B\to D\ell\nu_\ell$ in fully reconstructed events and determination of the Cabibbo-Kobayashi-Maskawa matrix element $|V_{cb}|$
- A Method to Determine $|V_{cb}|$ at the Weak Scale in Top Decays at the LHC
- Measurement of the W boson decay branching fraction ratio $\mathcal{B}$(W $\to$ cq) / $\mathcal{B}$(W $\to$ $\mathrm{q\bar{q}'}$) in proton-proton collisions at $\sqrt{s}$ = 13 TeV
- Measurement of the $|V_{cb}|$ element of the CKM matrix in $t\bar{t}$ decays with the ATLAS detector
- Development of the CMS detector for the CERN LHC Run 3
- Performance of the CMS Level-1 trigger in proton-proton collisions at $\sqrt{s} =$ 13 TeV
- The CMS trigger system
- Performance of the CMS high-level trigger during LHC Run 2
- Electron and photon reconstruction and identification with the CMS experiment at the CERN LHC
- Performance of the CMS muon detector and muon reconstruction with proton-proton collisions at $\sqrt{s}=$ 13 TeV
- Description and performance of track and primary-vertex reconstruction with the CMS tracker
- Particle-flow reconstruction and global event description with the CMS detector
- The anti-k_t jet clustering algorithm
- FastJet user manual
Related papers
- DrSai: an agentic AI system toward autonomous physics analysis workflows at BESIII
- CANTON- mu Proposal: A Next-Generation Muon g-2 Measurement at Sub-0.1 ppm Precision
- Search for dark photon dark matter near 1,meV using a superconducting mixer
- ANUBIS detector and its sensitivity to neutral long-lived particles
- How to scale your HEP ML models: A recipe for robust architecture comparisons at scale
- Search for the 16 O(ppp) to 13 C pi+ pi+ e+ Decay Mode in Super-Kamiokande Using Machine Learning Techniques