Activity-Induced Structural and Dynamical Heterogeneity in Colloidal Gels

arXiv:2610.16553 · cond-mat.soft, cond-mat.dis-nn, cond-mat.stat-mech · Submitted 2026-10-12 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Condensed Matter. The day in condensed matter: materials, phases and the measurements under them.

Kai: We're looking at the paper: "Activity-Induced Structural and Dynamical Heterogeneity in Colloidal Gels".

Mira: Here's the gist of the paper. Active gels are intrinsically non-equilibrium materials whose structural and dynamical heterogeneity emerges from the interplay of attractive interactions, thermal fluctuations, and self-propulsion The paper investigates a model active gel, simulated using large-scale Brownian dynamics simulations, to explore the effects of temperature T, active force strength f0, persistence timescale τp, and active particle concentration ρa.

Kai: Structural Evolution under Activity The structure of an active gel emerges from the competing mechanisms between self-propulsion forces and thermal fluctuations, in particular the competition between the kinetics of gelation timescale and persistent active motion leading to distinct structural reconfigurations The structural evolution across different sets of activity parameters indicates that an optimal combination of activity parameters exists that accelerates gel formation and promotes the development of large voids and clusters spanning the entire simulation box.

Mira: Influence on Network Connectivity The average number of bonds per particle, Nb(t), increases systematically with f0 at the long-time limit, indicating enhanced network connectivity and more effective bond formation with increasing activity In contrast, at the higher temperature T = 0.22, as shown in Fig.

Kai: 2(B), Nb(t) decreases at sufficiently large f0, suggesting that strong activity increasingly disrupts the attractive network through enhanced bond breaking.

Title and authors: Kai: So, shifting our focus slightly, we're talking about the paper "Activity-Induced Structural and Dynamical Heterogeneity in Colloidal Gels". This paper really zeroes in on how activity modifies both the physical structure and the movement patterns of these colloidal gels.

Mira: It’s not just about whether it forms a gel or not; it’s about *how* it's structured, and *how* those structures move over time. Specifically, they look at structural heterogeneity—the differences in local arrangement—and dynamical heterogeneity—the differences in particle motion.

Lev: I’m wondering what the paper actually shows regarding that dynamical heterogeneity part, because that’s where things get complicated when you try to run this on real systems with noise.

Kai: They show that the competition between activity and temperature can produce similar structures if you look at them through an "effective temperature" framework. This is a tool they use to map the structural quantities and relaxation timescales of the active gel onto those of a passive gel system.

Mira: That effective temperature concept is powerful because it lets them compare non-equilibrium active systems to their passive counterparts, which have well-understood thermodynamics. They’re checking if this description actually works for colloidal gels.

Lev: But I have to ask, how much do we rely on that description? If the mapping isn't perfect, then our predictions about the system's behavior under real conditions might be misleading.

Kai: The paper suggests that within this effective temperature framework, increasing the active force strength f0 can lead to an active gel with structural connectivity and gelation kinetics that are comparable to a passive gel system.

Mira: That sounds promising for material design; it means we can tune the network structure and formation speed by controlling the activity parameters through this effective temperature mapping.

Lev: Tuning things via an effective temperature is elegant, but how does that relate to the actual energy landscape of a real system? Does it just smooth out all the microscopic chaos into one predictable parameter?

The paper's summary: Kai: Moving into the actual findings of "Activity-Induced Structural and Dynamical Heterogeneity in Colloidal Gels", they show that activity fundamentally changes the dynamics during aging. This is quantified by looking at how the structural relaxation timescale evolves and how dynamical heterogeneity grows as you change the activity parameters.

Mira: They found that at low temperatures, when you have a percolating network structure, these systems relax faster and become less heterogeneous as the swim force increases compared to what happens at higher temperatures. That’s a key observation linking morphology and dynamics.

Lev: Faster relaxation dynamics due to increased persistence time tau p is interesting for hardware because it means the system settles into its final state quicker, which can reduce measurement times in our experiments.

Kai: They also show that the growth of dynamical heterogeneity with increasing swim force can be described using that same effective temperature framework, which contrasts with what they see in active glasses.

Mira: That contrast is important because it suggests that in colloidal gels, structural heterogeneity plays a much more direct role in determining dynamical heterogeneity than it does in active glasses, which have more homogeneous structures.

Lev: So the implication here is that for active gels, the structure itself dictates how chaotic the motion becomes when you add activity, whereas for glasses, the structure is already relatively uniform and doesn't drive those changes.

The paper's improvements: Kai: The authors suggest that their framework for using effective temperature is a good descriptor for these active colloidal gels because it successfully maps several structural quantities like the bond number, void size, and cluster size onto those of their passive counterparts.

Mira: That’s a big step because it allows you to predict how the network structure will look under different activity parameters just by looking at those passive gel metrics. It moves the field from just observing what happens to predicting what *will* happen.

Lev: Predicting structure based on a mapping is useful, but I’m concerned about the accuracy of that mapping when we introduce strong non-equilibrium driving forces like high active forces f0.

Kai: The paper shows that structural integrity and mechanical stability remain essentially unchanged within the effective temperature framework, which is good because it means you can expect the gel network to stay stable regardless of the activity parameters within that framework.

Mira: So, in essence, they’re saying that for a given effective temperature, you get similar structural and spatial heterogeneity. This suggests that once you find a state defined by Teff zero point, the local mobility differences are governed by something other than the specific activity level f0 itself.

Lev: If we can reliably predict the structure this way, then we could potentially design materials where we control the network properties without having to perfectly tune every single force parameter independently.

Conclusion: Kai: So, to wrap up on "Activity-Induced Structural and Dynamical Heterogeneity in Colloidal Gels", the paper shows that the structure of these gels is strongly influenced by the competition between temperature and activity parameters like f0, tau p, and rho a.

Mira: And they conclude that their effective temperature framework is a good descriptor for these active colloidal gels because it maps structural quantities onto those of passive counterparts, which gives us a way to predict network structure under varying activity settings.

Lev: From my side, I'd say the main thing is that the critical active force f0 depends on tau p and rho a; specifically, for tau p equals one hundred six you get a critical active force f0 equals seven point zero zero <ref:2610.16553#pg3>.

Kai: And remember that this framework helps us understand how structural heterogeneity in colloidal gels plays a key role in determining dynamical heterogeneity, unlike in active glasses where the structure isn't as controlling.

Mira: It’s about harnessing activity to engineer these networks with broader and more robust strands for practical applications.

Lev: I just want to add that the paper says that it will be important in future research to see how activity affects the transition from gels to glasses when you increase system density.

Kai: So, this paper is a solid piece of work showing how we can use an effective temperature concept to predict structural properties for active colloidal gels.

Mira: It really points toward tuning these materials for industrial applications using these ideas.

Tata Institute of Fundamental Research

cond-mat.soft, cond-mat.dis-nn, cond-mat.stat-mech

Submitted: 2026-10-12

Updated: 2026-11-04

Comments: 17 pages, 10 figures

License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/

Importance score: 92/100

The gist: Active gels are intrinsically non-equilibrium materials whose structural and dynamical heterogeneity emerges from the interplay of attractive interactions, thermal fluctuations…

Key concepts

Effective Temperature (Teff) Framework
This framework translates the complex dynamics of an active system into the language of a passive system. It allows researchers to map structural metrics like bond number and void size from the active gel onto those of a standard, non-moving passive gel. This provides a consistent way to compare how activity influences structure and relaxation.
Dynamical Heterogeneity (DH)
DH measures the fluctuations in particle rearrangements over time, quantifying how different parts of the system move at different speeds. The paper shows that in colloidal gels, this heterogeneity is strongly tied to the structural arrangement; unlike glasses where structure is homogeneous, DH here depends on how heterogeneous the structure itself is.
Critical Active Force (f_c0)
This force represents a threshold required for the active particles to effectively form a stable percolating network. The required critical force changes based on factors like persistence timescale ($ au_p$) and particle concentration ($ ho_a$), allowing engineers to design gels with specific mechanical stability and network characteristics.
Structural Heterogeneity vs. Homogeneity
The paper contrasts colloidal gels with active glasses. In gels, structural heterogeneity—the variation in local structure—is crucial for determining dynamical heterogeneity (DH). In contrast, active glasses have homogeneous structures where DH is not controlled by the underlying structure, highlighting a fundamental difference between these two material classes.

Terminology

Summary

Active gels are intrinsically non-equilibrium materials whose structural and dynamical heterogeneity emerges from the interplay of attractive interactions, thermal fluctuations, and self-propulsion The paper investigates a model active gel, simulated using large-scale Brownian dynamics simulations, to explore the effects of temperature T, active force strength f0, persistence timescale τp, and active particle concentration ρa. p. 0

Structural Evolution under Activity

The structure of an active gel emerges from the competing mechanisms between self-propulsion forces and thermal fluctuations, in particular the competition between the kinetics of gelation timescale and persistent active motion leading to distinct structural reconfigurations The structural evolution across different sets of activity parameters indicates that an optimal combination of activity parameters exists that accelerates gel formation and promotes the development of large voids and clusters spanning the entire simulation box.

Influence on Network Connectivity

The average number of bonds per particle, Nb(t), increases systematically with f0 at the long-time limit, indicating enhanced network connectivity and more effective bond formation with increasing activity In contrast, at the higher temperature T = 0.22, as shown in Fig. p. 1 2(B), Nb(t) decreases at sufficiently large f0, suggesting that strong activity increasingly disrupts the attractive network through enhanced bond breaking. p. 1

Mechanical Stability and Critical Forces

The critical active force f c0 strongly depends on the persistence timescale τp and the active particle concentration ρa For example, for τp = 106 (green triangle), we find f c0 = 7.00, while for τp = 102 (red square), f c0 = 9. p. 200. Furthermore, upon increasing ρa to 1. p. 200, f c0 shifts to 9. p. 200 compared with the ρa = 0. p. 210 case.

Effective Temperature Framework

An effective temperature (Teff) framework for active gels maps structural quantities and relaxation timescales in an active gel onto those of a passive gel This framework establishes a correspondence between structural quantities, including bond number, void and cluster size, and the structural relaxation timescale with a passive aged gel. Within the Teff description, an active glass can exhibit relaxation timescales comparable to their equilibrium counterparts but activity can have nontrivial effects on their dynamical heterogeneity. p. 8

Structural and Dynamical Heterogeneity Comparison

The competition between activity and temperature produces similar structures at the same Teff, indicating that in colloidal gels, structural heterogeneity plays an important role in determining DH whereas glasses have homogeneous structures. This suggests that dynamical heterogeneity in active gels with highly heterogeneous structure differs markedly from that observed in active glasses with a homogeneous structure. p. 9

Relaxation Dynamics and Aging

Activity alters the dynamics of colloidal gels during aging, as quantified by the evolution of the structural relaxation timescale and dynamical heterogeneity for different activity parameters Particularly at low temperature, the percolating network structures relax faster and become less heterogeneous with increasing swim force than at higher temperature. The results demonstrate that the strong coupling between active-gel morphology and relaxation dynamics is evident. p. 6

Conclusion on Effective Temperature Validity

The effective temperature framework turns out to be a good descriptor for these active colloidal gels, mapping several structural quantities, such as the bond number, void size, and cluster size of active systems onto those of their passive counterparts. The validity of an effective temperature description in active gels represents a significant advancement as it may enable the tuning of gel properties for future industrial applications. p. 9

Role of Structural Heterogeneity in Dynamics

The competition between activity and temperature produces similar structures at the same Teff, indicating that dynamical heterogeneity in active gels with highly heterogeneous structure differs markedly from that observed in active glasses with a homogeneous structure. This result highlights a fundamental difference between gels and glasses—in colloidal gels, structural heterogeneity plays an important role in determining DH, whereas glasses have homogeneous structures, which do not control the DH of glasses. p. 9

Future Research Directions

In future research, it will be important to elucidate the effects of activity during the transition from gels to glasses by systematically increasing system density. Such investigations may clarify how the decoupling between dynamical heterogeneity and structure occurs as systems approach glassy state from gels. p. 9 Ultimately, we believe that our findings offer valuable insights into how activity can be harnessed to engineer colloidal gels with broader and more robust percolating network strands for societal benefit. p. 9

Model Details

We have studied a well-constructed model of a size-polydisperse colloid-polymer mixture interacting via a short-range strongly attractive Morse potential In our model system, particles have a continuous size distribution comprising seven particle species with diameters ranging from 0.76¯σ to 1.24¯σ.

Activity Modeling

We model activity in our colloidal gel system as active Brownian particles simulated using Langevin dynamics We implement the activity by assigning a self-propulsion force f0 to a fraction ρa of randomly chosen particles.

Simulation Details and Protocols

The equations of motion are integrated using the BAOAB integrator with a time step of dt = 10−3 All simulations have been performed after evolving at T for a waiting time tw ∈ (10−3 − 105).

Dynamical Correlation Functions

The nonstationary variant of the two-point time correlation function in reciprocal space (self-intermediate scattering function) Fs(K, tw, t) is defined as The structural relaxation time τ (tw) characterizing the dynamics of the percolating gel is estimated by setting Fs(K, tw, t = τ (tw)) = 1/e.

Quantifying Dynamical Heterogeneity

We quantify the age-dependent growth of DH using the four-point susceptibility χ4 [80] which measures fluctuations in the overlap function qs. The calculation of χ4 in out-of-equilibrium dynamics requires averaging over a large number of realizations. p. 0 p. 0

Effective Temperature Definition

The activity induced excess temperature is defined as Kf 2 0 τp ρa/(1 + Gτp), which, together with the bath temperature T, gives the effective temperature. The relation Teff = T + K × f 20 / (1 + Gτp) is used to map structural and dynamical quantities onto those of their passive counterparts. p. 9

Key Findings on Structure

Active doping promotes the formation of well-annealed percolating network structures, particularly at lower temperatures (T = 0.10), indicating that active particles act as local structural reorganization agents enabling the system to explore lower-energy configurations. p. 9

Key Findings on Dynamics

Activity induces faster relaxation dynamics in active glasses [29] and in active gels, and this activity-induced faster relaxation dynamics is closely related to the kinetics of the gel morphology. The growth of DH with swim force can also be described by the same effective-temperature framework. p. 0

Structural Stability and Dynamics Link

The percolation network structure at T = 0.10 for large active force is more mechanically stable than the network structure at T = 0. p. 422. This behavior highlights the strong connection between gel structure, mechanical stability, and relaxation dynamics. p. 6

DH Dependence on Structure

The competition between activity and temperature produces similar structures at the same Teff, indicating that dynamical heterogeneity in active gels with highly heterogeneous structure differs markedly from that observed in active glasses with a homogeneous structure. The results demonstrate that, despite having different activity strengths f0 at the same Teff, the systems exhibit similar structural and dynamical heterogeneity. p. 9

Final Conclusion on Gels vs Glasses

This result highlights a fundamental difference between gels and glasses—in colloidal gels, structural heterogeneity plays an important role in determining DH, whereas glasses have homogeneous structures which do not control the DH of glasses. The paper demonstrates that the strong coupling between these heterogeneities distinguishes colloidal gels from conventional glass-forming liquids. p. 9

Model Parameters

The model system is defined by a size-polydisperse colloid-polymer mixture interacting via a short-range strongly attractive Morse potential The depth of the potential is ϵ0 = 1, the width of the potential is α0 = 33¯σ−1, and the cutoff parameter is rc = 1.4σij.

Activity Implementation

We implement activity by assigning a self-propulsion force f0 to a fraction ρa of randomly chosen particles Each active particle experiences a propulsion force F⃗a i(t) = f0 ⃗ni(t).

Simulation Setup

The model system consists of N = 10 000 particles confined in a cubic simulation box with periodic boundary conditions in all directions We fix the packing fraction at ϕ = 0.20.

Key Structural Metrics

We characterize the structure of the evolving gel network through morphological analysis, while dynamical changes are quantified by the relaxation timescale and dynamical heterogeneity (DH). We examine key structural quantities such as the number of bonds, gelation time, void size, and largest cluster size as a function of f0 for different choices of T, τp, and ρa. p. 1

Key Dynamical Metrics

We analyze the age-dependent growth of the relaxation timescale and dynamical heterogeneity as a function of activity. We quantify DH using the four-point susceptibility χ4 [80] which measures fluctuations in the overlap function qs. p. 4

Effective Temperature Framework Application

The effective temperature framework is applied to map structural quantities and relaxation timescales in an active gel onto those of a passive gel We show that within the Teff framework, increasing f0 yields an active gel with structural connectivity and gelation kinetics comparable to those of the passive gel.

Structural Heterogeneity in Teff

The characteristic pore structure of the percolating gel networks remains essentially unchanged despite variations in the activity parameters within the Teff framework. All representative active-gel configurations exhibit similar structural and spatial heterogeneity and the same relaxation timescale. p. 9 p. 9

Critical Force Dependence

The critical active force f c0 depends on the persistence timescale τp and the active particle concentration ρa. The critical active force f c0 yields 7. p. 4 p. 400, 9.00, and > 15.00 for τp = 106, 102, and 103 respectively. p. 4 p. 4

Relaxation Dynamics Dependence

The relaxation dynamics of an active gel are closely related to the kinetics of the gel morphology Increasing the persistence time to τp = 102 and 106 leads to a pronounced reduction in tgel, as compared with τp = 100, indicating that more persistent active motion promotes faster percolating network formation.

Dynamical Heterogeneity Growth

The growth of DH with increasing swim force can also be described by the same effective-temperature framework in stark contrast to observations in active glasses. This result highlights the crucial role of structural ordering in governing DH in active colloidal gels compared to active glasses. p. 0 p. 0

Effective Temperature Analogy Validation

The results for different waiting times with the similar Teff = 0.10 for different combinations of T and f0 are reported in Figs. p. 7 10(A–C). This demonstrates that not only is τ (tw) equal, but also the temporal evolution of FS(K, tw, t) is similar for all choices of activity parameters that yield the same Teff. p. 8

Structural Integrity and Stability

The gel network’s structural integrity and mechanical stability remain essentially unchanged within the Teff framework. This similarity in spatial heterogeneity of particle mobility is further confirmed by the Van Hove function. p. 9

Final Summary Statement

Collectively, these findings indicate that the structure of colloidal gels is strongly influenced by the competition between thermal fluctuations characterized by T and activity parameters that are characterized by f0, τp, and ρa which in turn govern the relaxation timescale and dynamical heterogeneity of the colloidal gels. The effective temperature framework is a good descriptor for these active colloidal gels mapping several structural quantities onto those of their passive counterparts. p. 9

Model Details Summary

We have studied a well-constructed model of a size-polydisperse colloid-polymer mixture interacting via a short-range strongly attractive Morse potential The depth of the potential is ϵ0 = 1, the width of the potential is α0 = 33¯σ−1, and the cutoff parameter is rc = 1.4σij.

Activity Modeling Summary

We model activity in our colloidal gel system as active Brownian particles simulated using Langevin dynamics We implement the activity by assigning a self-propulsion force f0 to a fraction ρa of randomly chosen particles.

Simulation Setup Summary

The model system consists of N = 10 000 particles confined in a cubic simulation box with periodic boundary conditions in all directions We fix the packing fraction at ϕ = 0.20.

Dynamical Correlation Functions Summary

The nonstationary variant of the two-point time correlation function in reciprocal space (self-intermediate scattering function) Fs(K, tw, t) is defined as The structural relaxation time τ (tw) characterizing the dynamics of the percolating gel is estimated by setting Fs(K, tw, t = τ (tw)) = 1/e.

Heterogeneity Quantification

We quantify the age-dependent growth of DH using the four-point susceptibility χ4 [80] which measures fluctuations in the overlap function qs. The calculation of χ4 in out-of-equilibrium dynamics requires averaging over a large number of realizations.

Effective Temperature Framework Summary

The effective temperature framework is applied to map structural quantities and relaxation timescales in an active gel onto those of a passive gel We show that within the Teff framework, increasing f0 yields an active gel with structural connectivity and gelation kinetics comparable to those of the passive gel.

Structural Heterogeneity in Teff Summary

The characteristic pore structure of the percolating gel networks remains essentially unchanged despite variations in the activity parameters within the Teff framework. All representative active-gel configurations exhibit similar structural and spatial heterogeneity and the same relaxation timescale.

Critical Force Dependence Summary

The critical active force f c0 depends on the persistence timescale τp and the active particle concentration ρa. The critical active force f c0 yields 7.00, 9.00, and > 15.00 for τp = 106, 102, and 103 respectively.

Relaxation Dynamics Dependence Summary

The relaxation dynamics of an active gel are closely related to the kinetics of the gel morphology Increasing the persistence time to τp = 102 and 106 leads to a pronounced reduction in tgel, as compared with τp = 100, indicating that more persistent active motion promotes faster percolating network formation.

Dynamical Heterogeneity Growth Summary

The growth of DH with increasing swim force can also be described by the same effective-temperature framework in stark contrast to observations in active glasses. This result highlights the crucial role of structural ordering in governing DH in active colloidal gels compared to active glasses.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Develop predictive models for colloidal gel stability by incorporating an effective temperature framework to map structural quantities like bond number, void size, and cluster size onto passive gel counterparts, allowing for prediction of network structure under varying activity parameters.

  2. Enhance material design capabilities by utilizing the critical swim force f c0 derived from the model to engineer percolating gel networks with optimized mechanical stability and controlled void/cluster sizes across different persistence timescales and particle concentrations.

  3. Improve understanding of active matter dynamics by creating a framework that distinguishes between dynamical heterogeneity in colloidal gels—where structural heterogeneity plays an important role in determining DH—and that observed in active glasses, enabling more nuanced predictions about how structural ordering governs particle rearrangements.

Sources

Related papers