Joule Thomson expansion of symmergent black holes in extended phase space

arXiv:2609.24400 · gr-qc · Submitted 2026-09-21 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: General Relativity and Quantum Cosmology. The day in general relativity and quantum cosmology.

Kai: I'm Kai.

Mira: And I'm Mira, here with Lev.

Kai: We're looking at the paper: "Joule Thomson expansion of symmergent black holes in extended phase space".

Mira: Here's the gist of the paper. We investigate the Joule Thomson expansion of a symmergent black hole within an extended phase-space formalism in which the thermodynamic pressure is introduced as an independent variable The symmergent entropy contains the parameter ˆα, which modifies the enthalpy and thermodynamic volume relative to their standard forms We show that the Joule Thomson coefficient depends only on the combination 8πP r2+, leading to an inversion curve Pi = π/2 T 2i that is independent of ˆα The isenthalpic curves, however, retain a parametric dependence on ˆα, indicating that the symmergent sector affects the thermodynamic trajectories but not the inversion boundary itself.

Kai: Geometric and Thermodynamic Setup The analysis begins by establishing a geometric and thermodynamic framework for studying the Joule Thomson expansion of the symmergent black hole This involves incorporating the curvature contribution associated with the symmergent sector into an effective thermodynamic pressure.

Mira: The static, spherically symmetric black-hole solution is derived within this framework, and the curvature contribution is interpreted as an effective thermodynamic pressure.

Kai: Thermodynamic Quantities Derivation The paper constructs the necessary thermodynamic quantities from the horizon geometry and symmergent parameters The Hawking temperature is determined by the surface gravity associated with the event horizon, resulting in T = 1 + 8πP r 2+ 4πr+.

Title and authors: Kai: The paper tackles the Joule Thomson expansion of symmergent black holes in extended phase space. It’s looking at how these specific black holes, which have this added symmergent component, behave when you perform a certain type of expansion.

Mira: Basically, they are trying to figure out the thermodynamic dynamics of these objects by treating the pressure as an independent variable within a framework that goes beyond the standard Einstein gravity setup.

Lev: I wonder how much computational cost it’s gonna be to model this extended phase space if we try to run it on a real quantum computer or even just a large classical simulation Lev.

Kai: The authors are suggesting that this approach helps us see a clearer picture of the expansion, especially when you consider the role of the symmergent entropy parameter, which they call alpha hat.

Mira: They show that while this parameter modifies things like the enthalpy and volume compared to standard black holes, it doesn't affect one specific key result related to how fast things are expanding.

The paper's summary: Kai: So, in terms of what they found, they calculate the Joule Thomson coefficient and find that it only depends on a combination of the pressure and the radius term r plus squared.

Mira: That’s interesting because it means that even though there's this symmergent modification to how things are defined, like how the entropy or enthalpy changes with alpha hat, this specific coefficient doesn't actually depend on that parameter at all.

Lev: So if we were trying to use this result to predict some kind of characteristic of the expansion—like a specific scaling—it would be robust against these symmergent tweaks Lev.

Kai: They show this leads directly to an inversion curve, which is Pi equal pi over two times T squared i. And the crucial part is that this inversion curve, where the coefficient equals zero, stays independent of alpha hat.

Mira: That independence of alpha hat for the inversion boundary is a strong statement because it suggests that even with these modifications to the black hole's properties, there’s a universal boundary condition for this expansion Mira.

The paper's improvements: Kai: The authors point out that while the inversion curve is fixed, the actual paths you follow on the isenthalpic curves are still affected by alpha hat. They see an explicit dependence through a combination of G H zero over alpha hat.

Mira: That’s a key distinction. It means you can have this universal boundary condition for when things stop expanding in that way, but the actual thermodynamic trajectory—the path the system takes as it evolves—is altered by the presence of the symmergent sector Mira.

Lev: For me, that tells us something about how we map these theoretical results onto physical systems. It suggests that while the fundamental limit is set by gravity and geometry, what happens *on* that limit depends on the specific matter or field content you're dealing with Lev.

Kai: They are using this to distinguish between cooling regimes, where the coefficient is positive, and heating regimes where it's negative during a throttling process. This helps map out the whole expansion more thoroughly Kai.

Conclusion: Mira: To wrap up, the core finding from "Joule Thomson expansion of symmergent black holes in extended phase space" is that while the inversion curve, Pi equal pi over two times T squared i, is universal and independent of alpha hat, the actual isenthalpic trajectories show a dependence on alpha hat through the G H zero over alpha hat combination.

Kai: So we have a clean boundary condition for when things change behavior versus how those behaviors evolve along the path. It clarifies that the symmergent sector modifies the internal dynamics but not this specific inversion point.

Lev: From an engineering standpoint, knowing which parts of the trajectory are sensitive to alpha hat is important for figuring out what kind of numerical stability we need when running simulations Lev.

Mira: The paper successfully shows how incorporating the cosmological constant as a pressure leads to these interesting constraints on black hole dynamics, and it’s a solid piece for understanding black hole chemistry.

Kai: It really connects the geometry of the horizon directly to measurable thermodynamic processes like expansion, which is something I find very satisfying when I'm working on qubit models Kai.

Saheb Soroushfar, Sayyed Mehrab Ramezani

Department of Physics, College of Sciences, Yasuj University · Department of Mathematics, College of Sciences, Yasuj University

gr-qc

Submitted: 2026-09-21

Updated: 2026-09-21

Journal ref: JHAP, Volume 7, Issue 2, Spring 2027

DOI: 10.22128/jhap.2026.3413.1220

License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/

Importance score: 72/100

The gist: We investigate the Joule Thomson expansion of a symmergent black hole within an extended phase-space formalism in which the thermodynamic pressure is introduced as an independent variable The…

Key concepts

Symmergent Black Hole
This is a specific type of black hole solution that includes an additional parameter called $\hat{\alpha}$. This parameter modifies standard thermodynamic quantities like enthalpy and volume, allowing the model to account for effects beyond simple general relativity.
Joule Thomson Expansion
This refers to the process of expanding a black hole under specific conditions where the Joule Thomson coefficient ($\mu_{JT}$) is analyzed. The paper uses this analysis to determine if the expansion is cooling or heating, which depends on whether $\mu_{JT}$ is positive or negative.
Inversion Curve ($\Pi = \pi/2 T^2_i$)
This curve defines a critical boundary where the Joule Thomson coefficient equals zero. The key finding is that this inversion boundary is universal and does not depend on the symmergent parameter $\hat{\alpha}$, meaning it remains the same regardless of how much the black hole's symmergent nature changes.
Isenthalpic Trajectories
These represent the paths taken by the black hole as it undergoes expansion while keeping its enthalpy constant. The analysis shows that these specific thermodynamic paths are explicitly dependent on $\hat{\alpha}$ through a combination of $G$ and $H_0$, indicating that the symmergent sector influences how the black hole evolves along these specific energy-conserving routes.

Terminology

Summary

We investigate the Joule Thomson expansion of a symmergent black hole within an extended phase-space formalism in which the thermodynamic pressure is introduced as an independent variable The symmergent entropy contains the parameter ˆα, which modifies the enthalpy and thermodynamic volume relative to their standard forms We show that the Joule Thomson coefficient depends only on the combination 8πP r2+, leading to an inversion curve Pi = π/2 T 2i that is independent of ˆα The isenthalpic curves, however, retain a parametric dependence on ˆα, indicating that the symmergent sector affects the thermodynamic trajectories but not the inversion boundary itself. p. 0

Geometric and Thermodynamic Setup

The analysis begins by establishing a geometric and thermodynamic framework for studying the Joule Thomson expansion of the symmergent black hole This involves incorporating the curvature contribution associated with the symmergent sector into an effective thermodynamic pressure. The static, spherically symmetric black-hole solution is derived within this framework, and the curvature contribution is interpreted as an effective thermodynamic pressure. p. 4

Thermodynamic Quantities Derivation

The paper constructs the necessary thermodynamic quantities from the horizon geometry and symmergent parameters The Hawking temperature is determined by the surface gravity associated with the event horizon, resulting in T = 1 + 8πP r 2+ 4πr+. The entropy of the symmergent black hole is given by S = απr squared + G. p. 7 The consistent extended first law is formulated as dH = T dS + V dP, where H denotes the thermodynamic enthalpy. p. 3

Joule Thomson Analysis and Inversion Curve

The Joule Thomson coefficient is calculated to be µJT = r+ / (1 - 8πP r 2+ 3) (3.9) The inversion condition, µJT = 0, yields the inversion curve Pi = π/2 T 2i. p. 2 This inversion curve is independent of the symmergent normalization factor ˆα. p. 7

Isenthalpic Trajectories and Parameter Dependence

The isenthalpic trajectories retain an explicit dependence on the symmergent normalization factor through the combination GH0/αˆ. This distinction shows that while the inversion boundary is universal, the thermodynamic paths followed during expansion are modified by the symmergent sector. p. 0 The intersection of these trajectories with the inversion locus identifies the horizon radii at which µJT = 0. p. 9

Conclusion and Implications

The results provide a complete thermodynamic description of the Joule Thomson expansion for the symmergent black hole The cooling regime P Pi were distinguished explicitly. The analysis clarifies that the inversion curve is independent of ˆα, while the isenthalpic trajectories depend on it through H0/αˆ. p. 0

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Extended Phase Space Modeling for Black Hole Thermodynamics: The improved AI system can accurately model black hole thermodynamics by treating cosmological constant as an independent thermodynamic pressure, allowing it to study processes where pressure and temperature vary while enthalpy remains fixed.

  2. Joule Thomson Expansion Analysis: The system can determine the Joule Thomson coefficient muJT and the inversion curve Pi equals pi over two T squared i, enabling it to distinguish between cooling (muJT greater than zero) and heating (muJT less than zero) regimes during a throttling process.

  3. Symmergent Parameter Impact Quantification: The AI can precisely quantify how symmergent parameters modify the isenthalpic trajectories, showing that the isenthalpic trajectories retain an explicit dependence on the symmergent normalization factor through the combination GH0 over alpha hat.

  4. Holographic Correspondence Verification: The system can interpret results within a holographic framework by recognizing that the Joule Thomson expansion corresponds to an isenthalpic process in the dual field theory, linking geometric dynamics to boundary conformal field theory behavior.

  5. Thermodynamic Consistency Check: The AI can verify the consistency of the extended first law by ensuring that dH equals T dS plus V dP holds true across all derived quantities, confirming that the extended first law is satisfied consistently.

Related papers