cWB-space: A time-frequency unmodelled transient-search pipeline for LISA
Listen
Radio episode about this paper
Transcript
Introduction to the show: ident: General Relativity and Quantum Cosmology. The day in general relativity and quantum cosmology.
Kai: I'm Kai.
Mira: And I'm Mira, here with Lev.
Kai: We're looking at the paper: "cWB-space: A time-frequency unmodelled transient-search pipeline for LISA".
Mira: Here's the gist of the paper. Gravitational-wave observations can reveal sources whose signals are not known in advance The central physical difficulty is that a feature in the data may come either from a gravitational wave or from a disturbance within the instrument.
Kai: This work presents cWB-space, which identifies candidate signals by following how their power is distributed in time and frequency, and then reconstructs parts of their waveforms without imposing a source model.
Mira: Pipeline Overview cWB-space is organized as a sequence of modular functions that includes a response stage, an instrument stage, a TDI-construction stage, and a search stage.
Kai: The simulator starts by generating GW source time series and propagating them through the LISA response into the six one-way links.
Title and authors: Kai: So, let’s talk about the title of this paper, cWB-space: A time-frequency unmodelled transient-search pipeline for LISA. It immediately tells you what this is about—it's a pipeline for searching for gravitational wave transients that doesn't require a predicted waveform.
Mira: I agree. The authors are Shubhanshu Tiwari, Yumeng Xu, and Giovanni A Prodi from the University of Trento, along with collaborators from ETH Zurich and IAC in Spain. It’s a team pulling together expertise from different physics areas to tackle this specific LISA challenge.
Lev: From my side, it’s interesting that they are focusing on LISA specifically. The challenge there is dealing with the overlapping astrophysical sources and the instrumental disturbances simultaneously, which makes any search strategy really tough.
Kai: It seems like they’re addressing that head-on by focusing on how power is distributed across time and frequency instead of relying solely on a predicted waveform to look for signals. That's a big shift in approach.
Mira: They are essentially using the structure of the data itself—the time-frequency distribution—as the primary search tool, rather than trying to match it directly against a known waveform family.
Lev: And from my perspective as someone building real hardware, this means they’re looking for statistical signatures in the measured strain that could point toward a signal even if we don't have a perfect model of what that signal should look like. It’s about finding anomalies in the noise structure.
Kai: So it’s less about matching shapes and more about finding patterns in how energy moves through the detector over time and frequency. It’s an unmodelled approach, which is what makes it so appealing for discovering novel signals.
The paper's summary: Mira: Looking at the summary, cWB-space is organized as a sequence of modular functions that includes a response stage, an instrument stage, a TDI-construction stage, and finally a search stage. It’s not one big black box; it’s built in stages.
Kai: That modular structure is smart because it allows you to test each piece individually. They start by generating gravitational wave source time series and running them through the LISA response into those six one-way links.
Lev: And then they generate realistic noise by first evolving the LISA Instrument simulation for a duration of zero point one second, and then evaluating those TDI observables at that same cadence to get the realistic noisy links.
Mira: The core idea is that this pipeline groups concentrations of power in two combined LISA data streams and ranks them using three things: their strength, their relative strength in the two streams, and their frequency evolution.
Kai: And they use this ranking statistic called rho event which we talked about earlier, which combines the total power in a cluster with its balance between A and E plus the evolution of its centroid frequency. That gives them a way to prioritize candidates based on physical characteristics like chirp-like tracks.
Lev: It’s interesting how they then use the WDM transform to compute a coefficient map where each pixel is a time and frequency pair, and then they do event clustering based on that map.
Mira: So the whole process flows from simulating sources and noise, through whitening the WDM map, clustering bright pixels into candidate events, ranking them by rho event, and then using glitch classification to filter out instrumental disturbances.
Kai: And it’s important to note that this entire pipeline is designed to work on both simulated data branches and real-data branches. This means you can test how it handles the actual noisy links versus perfectly simulated ones.
The paper's improvements: Lev: What they suggest as improvements is focused on making the identification of candidate signals more robust by integrating detector response comparisons. They want to evaluate where a similar response can arise from an instrumental origin.
Kai: That directly improves instrumental disturbance discrimination. It means the method isn't just looking at one observable; it’s checking how a feature affects different TDI observables to see if that pattern is consistent with a GW or if it looks like an instrument glitch.
Mira: They also improve the ranking statistics by defining rho event more precisely to explicitly incorporate the total power in a cluster and its balance between A and E plus the evolution of its centroid frequency.
Lev: That refinement should give us a better way to prioritize signals based on those physical characteristics we discussed, like tracking chirp-like tracks, without relying solely on the original definition.
Kai: And they add an event-level consistency test using Sagnac and zeta TDI combinations to evaluate how different link patterns and strengths affect the response statistic. That’s a new way to check for instrumental transients when A/E alone isn't sufficient.
Conclusion: Mira: So, wrapping up the paper cWB-space, they provide template free transient search, waveform reconstruction without imposing a source model, and additional information carried by the LISA detector response via glitch classification.
Kai: It’s a really useful combination of tools here. They can find things they don't know about before they have a good model for them, and then reconstruct some waveform info afterwards.
Lev: For me, the main implication is that this method gives us a way to investigate signals whose waveforms are uncertain or haven't been anticipated yet, which could help us discover unexpected dynamics or physical processes outside of established source models.
Kai: That leads into how we might use it in global analysis. This capability also motivates a role within the global analysis of LISA data because it allows for this kind of discovery without needing to assign those waveforms to a particular astrophysical population right away.
Mira: It’s about following the power distribution, not fitting a model, and that’s where it opens up new avenues for exploring what might be happening in space. We're still waiting to see what kinds of interesting things this pipeline can actually find when run on the real data sets.
Lev: I just think this framework is solid for testing how we can use these complex time-frequency maps to pull out physical information from noisy detector output. It’s a strong step toward separating signal from noise in a way that respects the physics of the measurement itself.
Shubhanshu Tiwari, Yumeng Xu, Giovanni A Prodi
Department of Earth and Planetary Sciences, ETH Zurich · Departament de Fósica, Universitat de les Illes Balears · Department of Physics, University of Trento and INFN-TIFPA
gr-qc, astro-ph.IM
Submitted: 2026-09-11
Updated: 2026-10-30
Comments: 19 Pages, 10 figures,
License: http://creativecommons.org/licenses/by/4.0/
Importance score: 90/100
The gist: Gravitational-wave observations can reveal sources whose signals are not known in advance The central physical difficulty is that a feature in the data may come either from a gravitational wave or…
Key concepts
- WDM Transform
- This transform creates a map showing how signal power is distributed across both time and frequency simultaneously. Each spot on this map represents a specific time and frequency pair, allowing the system to visualize the overall structure of the data.
- Detection Statistic (rhoevent)
- This formula ranks candidate signals by combining several factors: their total power, how balanced they are between two data streams (A and E), and how their central frequency changes over time. This helps prioritize potential events based on physical characteristics like a chirp.
- Template-free Search
- Instead of looking for signals matching a known waveform, this method searches for any pattern of power distribution that looks like a transient event. This is crucial for finding unexpected or novel gravitational wave signals whose exact shape is not yet predicted by current models.
- TDI Observables
- These are specific data products derived from the raw LISA detector measurements. The pipeline uses these observables to compare how power concentrates in different channels, which helps distinguish between a true gravitational wave and noise originating from the instrument itself.
Terminology
Summary
Gravitational-wave observations can reveal sources whose signals are not known in advance The central physical difficulty is that a feature in the data may come either from a gravitational wave or from a disturbance within the instrument. p. 0 A
transient search could identify intervals deserving attention before a complete description of all those sources is
available. The central physical difficulty is that a feature
in the data may come either from a gravitational wave or
from a disturbance within the instrument. For the Laser Interferometer Space Antenna (LISA), the challenge is to
find such signals among overlapping astrophysical sources and disturbances in the instrument. We
present cWB-space, which identifies candidate signals by following how their power is distributed
in time and frequency, and then reconstructs parts of their waveforms without imposing a source
model.Where the paper says it
Where the paper says it
Pipeline Overview
cWB-space is organized as a sequence of modular functions that includes a response stage, an instrument stage, a TDI-construction stage, and a search stage. The simulator starts by generating GW source time series and propagating them through the LISA response into the six one-way links. p. 1 In case of real
LISA data the downstream pipeline from common links
is carried forward. Simulator
The simulator starts by generating GW source time
series and propagating them through the LISA response
into the six one-way links. The response uses LISA Orbits
and LISA GW Response, and the noisy-link simulation
uses LISA Instrument [19–22]. The realistic-noise is generated by first evolving the
LISA Instrument simulation at ∆t = 0. The realistic-noise is generated by first evolving the
LISA Instrument simulation at ∆t = 0. 1 s and evaluating the TDI observables at the same cadence. We present a pipeline connecting candidate finding, detector-response comparisons, and waveform reconstruction. It groups concentrations of power in two
combined LISA data streams and ranks them using their
strength, relative strength in the two streams, and frequency evolution.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Time-Frequency Representation
The WDM transform computes a coefficient map where a time-frequency pixel denotes one indexed pair (ti, fj) on the map. The default cWB-space whitening is the self-A/E median normalization, using the analyzed data segment itself to estimate this background. p. 3 Whitening
We divide channel power by a frequency-dependent
empirical noise-floor to compare excesses within the event
map. The default cWB-space whitening is the self-A/E
median normalization, using the analyzed data segment
itself to estimate this background. Bright-pixel event clustering
The clustering stage groups bright pixels in the
whitened WDM map into candidate events. It operates
on the combined search power PAE in a chosen time window and frequency band.Where the paper says it
Where the paper says it
Detection Statistic
The ranking statistic is defined as ρevent = p EAE p BAE 1 + mchirp squared. This statistic combines the total power in a cluster, its balance between A and E, and the evolution of its centroid frequency. p. 4 The choices made here for the sparseness and
the connectivity of the pixels are based on empirical tests
done for a small set of MBHB injections, and can be improved and targeted to other signal classes. Pipeline detection statistic
The ranking combines the total power in a cluster, its
balance between A and E, and the evolution of its centroid frequency. (14)
The three factors are basically the weighting the normalized power with channel balance, and approximately
non-decreasing centroid frequency. The chirp term is a
preference in the ranking, not a strict requirement on
candidate morphology: its multiplicative factor lies between 1/2 and 1, so a nonchirping event is not rejected
solely for lacking an increasing frequency.Where the paper says it
Where the paper says it
Validation Study
The validation study addresses three connected questions: which candidates are found, what their channel responses reveal, and what waveform information can be recovered. The MBHB-plus-glitch validation uses a continuously generated two-day instrumental-noise data and prescribed sources to test candidate finding and TDI response comparisons. p. 6 OpenAI Codex (GPT-6 Astra) assisted in the development and check of scripts for some of the validation,
benchmarking, and plotting studies under the authors
directions. MBHB-plus-glitch validation
This study use a continuously generated two-day
instrumental-noise data, sampled initially at 0. The MBHB and generic-burst data
examine candidate finding and TDI response comparisons for prescribed gravitational-wave and link-glitch injections. The Sangria analysis tests the association of the
leading candidates with the unblinded content of MBHB.Where the paper says it
Where the paper says it
Waveform Recovery
The reconstruction studies assess waveform extraction separately with different settings from candidate identification. For example, the reconstruction-to-source norm ratios are within approximately 1. p. 9 1151,
and 0. 1309; the reconstruction-to-source norm ratios are
1. The reference search uses K = 32, while the reconstruction examples use K = 256. These are empirical
working configurations for the examples studied here,
not the outcome of a systematic optimization of K or
uniquely preferred values. VI F; Figs. No instrument-monitor comparison; reference combines
all black-hole signals; local
recovery is not an isolatedsource full-waveform test.Where the paper says it
Where the paper says it
Where the paper says it
Conclusions
cWB-space provides template-free transient search, waveform reconstruction, and additional information carried by the LISA detector response via glitch classification. The analysis conducted in this paper follows gravitational-wave and link-glitch injections through the LISA response to second-generation TDI observables in noisy LISA data. p. 2 3
Simulator
input strain waveform
or generic burst
phenomxpy
LISA response
six GW links
LISA Orbits
GW Response
Instrument model
realistic noisy links
LISA Instrument
Common link data
(12, 23, 31, 13, 32, 31)
Real LISA input
Calibrated one-way
link data
TDI observables
X, Y, Z; A, E, T;
α, β, γ, ζ PyTDI
A/E WDM maps
self-median whitening
wdm-wavelet
Bright-pixel
event clustering
Sagnac/zeta WDM
positive-excess ratio
Event catalog
detection statistic
and glitch classifier
wdm-wavelet
FIG. Schematic overview of the cWB-space analysis chain. For the Laser Interferometer Space Antenna (LISA), the challenge is to
find such signals among overlapping astrophysical sources and disturbances in the instrument. We
present cWB-space, which identifies candidate signals by following how their power is distributed
in time and frequency, and then reconstructs parts of their waveforms without imposing a source
model. Finding a feature and
testing its physical origin are therefore connected parts
of the analysis. This is also relevant to LISA’s global fit: the effort to
disentangle many sources and the noise together.Where the paper says it
Where the paper says it
Where the paper says it
Acknowledgments
The authors thank Johan Robertsson for fruitful discussions and continued support. The analysis uses PyTDI, LISA Orbits, LISA GW Response, LISA Instrument, wdm-wavelet, phenomxpy, and lisaglitch. p. 2 3
Simulator
input strain waveform
or generic burst
phenomxpy
LISA response
six GW links
LISA Orbits
GW Response
Instrument model
realistic noisy links
LISA Instrument
Common link data
(12, 23, 31, 13, 32, 31)
Real LISA input
Calibrated one-way
link data
TDI observables
X, Y, Z; A, E, T;
α, β, γ, ζ PyTDI
A/E WDM maps
self-median whitening
wdm-wavelet
Bright-pixel
event clustering
Sagnac/zeta WDM
positive-excess ratio
Event catalog
detection statistic
and glitch classifier
wdm-wavelet
FIG. Schematic overview of the cWB-space analysis chain. Reconstruction studies assess waveform extraction
separately with different settings from candidate identification. OpenAI Codex (GPT-6 Astra) assisted in the development and check of scripts for some of the validation,
benchmarking, and plotting studies under the authors
directions. data sets are generated in overlapped chunks and stitched
only after this removal, filtering, and downsampling procedure has been applied. The noise and SNR conventions are checked against the standard LISA sensitivity
normalization of Babak et al. LISA will observe the millihertz gravitational-wave
sky, with many sources present at the same time [4]. A
transient search could identify intervals deserving attention before a complete description of all those sources is
available.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.
Improvements for AI systems
-
Automated transient candidate identification based on time-frequency power distribution enables systems to
identify candidate signals by following how their power is distributed in time and frequency.
This allows AI to search for unexpected signals without needing a predicted waveform from a specific source class. -
Automated waveform reconstruction capability allows systems to
reconstruct parts of their waveforms without imposing a source model
after identifying candidate transients. This enables the system to generate reconstructed channel responses by usingthe inverse transforms provided by wdm-wavelet.
-
Instrumental disturbance discrimination is improved by integrating detector response comparisons, as the method can evaluate
where a similar response can arise from an instrumental origin.
This allows AI to distinguish between gravitational wave signals and disturbances based on how they affect different TDI observables. -
Improved ranking statistics allow systems to rank candidates using
the total power in a cluster, its balance between A and E, and the evolution of its centroid frequency
by calculating the statistic rhoevent. This enables better prioritization of candidates based on physical characteristics like chirp-like tracks. -
Automated classification of instrumental glitches is enhanced by adding an event-level consistency test using Sagnac and zeta TDI combinations to evaluate
how different link patterns and strengths affect the response statistic.
This helps in distinguishing instrumental transients from gravitational wave signals when the A/E statistic alone is insufficient. -
Template-free search capability allows systems to investigate signals whose waveforms are uncertain or have not yet been anticipated, which can help identify
unexpected dynamics or physical processes
outside established source models. This supports the discovery of novel signal morphologies and helps guide iterative source modeling in global fits.
Abstract
The Laser Interferometer Space Antenna (LISA) will observe massive-black-hole mergers and other transient phenomena alongside many long-lived gravitational-wave signals. Some transients may be incompletely modeled or have waveforms that have not been anticipated. We present cWB-space, a pipeline that combines an unmodeled transient search, waveform reconstruction, and a time-frequency glitch classifier. The search identifies concentrations of signal power in time and frequency and reconstructs candidate waveforms without requiring a source template. The glitch classifier compares how candidates appear in different combinations of LISA's laser measurements, with the background estimated from the observed data. We test the pipeline with simulated black-hole binaries with aligned and precessing spins, burst signals with different shapes, and instrumental glitches. The response comparisons help assess a candidate's astrophysical or instrumental origin, while also revealing correlated glitches that can resemble gravitational waves. In the Sangria simulated LISA data, the search recovers all six injected massive-black-hole binaries as its six highest-ranked candidates. Their local reconstructions recover the main features of the injected waveforms over the intervals studied. These results demonstrate how an unmodeled search can connect transient identification with investigation of a candidate's origin and waveform recovery.
Sources
- Observing gravitational-wave transient GW150914 with minimal assumptions
- GW190521: A Binary Black Hole Merger with a Total Mass of $150 ~ M_{\odot}$
- Method for detection and reconstruction of gravitational wave transients with networks of advanced detectors
- Detecting Gravitational Wave Bursts with LISA in the presence of Instrumental Glitches
- Prototype Global Analysis of LISA Data with Multiple Source Types
- An efficient GPU-accelerated multi-source global fit pipeline for LISA data analysis
- Modular global-fit pipeline for LISA data analysis
- Algebraic approach to time-delay data analysis for LISA
- Geometric Time Delay Interferometry
- Characterization of Time Delay Interferometry combinations for the LISA instrument noise
- LISA science ground segment conventions
- Detecting extreme mass ratio inspiral events in LISA data using the Hierarchical Algorithm for Clusters and Ridges (HACR)
- Detecting gravitational-wave bursts from black hole binaries in the Galactic Center with LISA
- GPU-accelerated LISA parameter estimation with full time domain response
- Time domain phenomenological model of gravitational wave subdominant harmonics for quasi-circular non-precessing binary black hole coalescences
- Unified model for the LISA measurements and instrument simulations
- LISA Sensitivity and SNR Calculations
- The LISA Optimal Sensitivity
- Time Delay Interferometry combinations as instrument noise monitors for LISA
- Second-Generation Time-Delay Interferometry
Related papers
- Accurate waveforms for generic planar-orbit binary black holes: The multipolar effective-one-body model SEOBNRv6EHM
- Analytic Marginalization Over Calibration Uncertainties in Gravitational Wave Inference and Application to Black Hole Ringdown
- A catalog of long, eccentric and precessing binary black hole simulations from ICTS-TIFR
- Pole Skipping, Avoided Crossing, and Resonant Excitation in Kerr Quasinormal Modes near Algebraically Special Frequencies
- Gravitational Waves from Green's Function Decomposition for a Kerr black hole: I. Equatorial ISCO Plunge
- A New Spin on Dissipative Tides: First-Post-Newtonian Effects in Compact Binary Inspirals