Tunneling characteristics of twisted double bilayer graphene heterostructures
Listen
Radio episode about this paper
Transcript
Introduction to the show: ident: Quantum Radio. Generated commentary on the latest quantum physics and condensed matter papers.
Kai: We're looking at the paper: "Tunneling characteristics of twisted double bilayer graphene heterostructures".
Mira: Here's the gist of the paper. Electron tunneling between sheets of bilayer Bernal graphene twisted at different small angles exhibits resonant peaks, steps, and regions of negative differential resistance whose origin is explained by the intersections of energy- and momentum-shifted electron dispersions of adjacent layers <ref:2609.01258#pg2>.
Kai: A theoretical analysis demonstrates that understanding this phenomenon relies on the competition between like (conductivity-conductivity or valence-valence) and unlike (conductivity-valence) bands of parallel bilayer graphene sheets <ref:2609.01258#pg4>.
Mira: Polarization of the electron wave function across graphene sublayers caused by displacement field within bilayer graphene strongly affects tunneling probability, thus enhancing negative differential resistance due to Van Hove singularities at the band edges <ref:2609.01258#pg5>.
Kai: Experimental Setup and Devices The study presents an experimental and theoretical investigation of finite-bias tunneling in twisted heterostructures between Bernal BLG sheets with different twist angles <ref:2609.01258#pg6>.
Title and authors: Kai: So, we're looking at this paper called "Tunneling characteristics of twisted double bilayer graphene heterostructures," and it’s about how these materials behave when they're twisted at different small angles. It basically looks at the current-voltage curves and what those peaks and steps mean for the electronics.
Mira: Yeah, I read the title, and it sounds like they are exploring how that twist angle messes with the tunneling between two layers of Bernal bilayer graphene. It suggests that this twist is a key control knob for these quantum effects we see in these van der Waals heterostructures.
Lev: From my side, I'm thinking about what they built and measured—are we talking about high fidelity measurements here, or are these just conceptual maps? Because on real hardware, the fidelity of the tunneling itself is super sensitive to any misalignment.
Kai: They did experimental work using two different twist angles: one was zero point thirteen degrees and the other was zero point seven three degrees. That range shows how much that angle really matters for what happens next.
Mira: And it’s interesting because they use dual-gate architectures to control the doping on each layer, which is crucial for seeing how those different band structures interact.
Lev: I wonder if controlling the doping separately is practical when you're trying to map out these complex tunneling channels, especially when we consider how much disorder affects those measurements.
Kai: Exactly, they are mapping out different doping regimes to see where the current flows and where it gets blocked. That’s what they did in their setup.
Mira: It seems like the core idea is that you can tune the system so that those electron dispersions either intersect or not at the Fermi level, which dictates whether tunneling is allowed or forbidden >
The paper's summary: Kai: So, summarizing what they found in "Tunneling characteristics of twisted double bilayer graphene heterostructures," they’re looking at how the current changes as you change the bias voltage and the gate voltages. They find these resonant peaks, steps, and regions where the resistance goes negative.
Mira: And what I see is that this happens because of a competition between different types of electron bands in parallel bilayer graphene sheets—specifically between like bands and unlike bands >
Lev: That competition between like and unlike bands sounds complex to model on real hardware; we'd need to know exactly how the tunneling matrix elements depend on where those wave functions are distributed across the layers.
Kai: They modeled this by accounting for sublayer polarization, which they found strongly affects the tunneling probability, especially enhancing those negative differential resistance regions because of things called Van Hove singularities at the band edges >
Mira: That's important because it means that just looking at one layer isn't enough; you have to consider how the electron wave function is polarized across both sublayers for a full picture.
Lev: If we were trying to implement this, I'd be worried about the complexity of modeling that polarization accurately when dealing with finite temperature effects, because those things often smear out these sharp features.
Kai: They did include finite temperature in their calculation and also accounted for gap opening in each layer self consistently, which makes the theoretical model pretty detailed >
The paper's improvements: Mira: The authors suggest a few ways to make this study better, mostly focusing on how they handle the physics. They point out that understanding the competition between like and unlike bands is where you need to focus your theoretical modeling >
Kai: They also emphasize that their current model needs to incorporate the electrostatics of the dual-gated system more thoroughly, especially concerning quantum capacitance effects >
Lev: For me, I think they need a better way to handle those energy level broadenings because in real devices, those things are often much messier than what's in the simple calculation.
Mira: And they suggest that by systematically analyzing the tunneling current across different conditions and figuring out how these formation mechanisms work, you can actually find the most pronounced regions of negative differential resistance >
Kai: That sounds like a plan for future work, focusing on using this systematic analysis to pinpoint exactly where those interesting transport features are happening >
Lev: And I think that's smart because it moves beyond just showing the peaks and steps; it tells you where the real performance bottlenecks are on a physical device.
Conclusion: Kai: So, wrapping up "Tunneling characteristics of twisted double bilayer graphene heterostructures," the main point is that those different relative displacements in energy and momentum between layers create diverse I-V curves depending on how you set the gate voltages and the twist angle >
Mira: And they confirm that there are two kinds of characteristics: symmetric ones when both layers are doped equally at zero bias, and asymmetric ones when they have significantly different doping levels there >
Lev: And that both those resonant peaks lead to negative differential resistance, which is something practical for device design, though we still need to see how big the current density can actually get before those effects dominate.
Kai: They also noted that these qualitative features stick even when the twist angle gets larger, although the peaks get wider and the forbidden regions for unlike-band tunneling become wider >
Mira: So, it’s a lot of information about how these twisted structures respond to tuning parameters, and they reproduced what was measured with reasonable accuracy >
Lev: I just think that confirming these features at larger twist angles is important because it tells us how robust this physics is when the twist isn't tiny anymore.
Alexey A. Sokolik, Azat F. Aminov, Evgenii E. Vdovin, Yurii N. Khanin, Mikhail A. Kashchenko, Denis A. Bandurin, Sergey V. Morozov, Kostya S. Novoselov
Institute for Spectroscopy, Russian Academy of Sciences · National Research University Higher School of Economics · Institute of Microelectronics Technology and High Purity Materials, Russian Academy of Sciences · Programmable Functional Materials Lab, Center for Neurophysics and Neuromorphic Technologies · Moscow Center for Advanced Studies · Department of Materials Science and Engineering, National University of Singapore · Institute for Functional Intelligent Materials, National University of Singapore
cond-mat.mes-hall
Submitted: 2026-09-01
Updated: 2026-09-01
Journal ref: Appl. Phys. Lett. 129, 163102 (2026)
DOI: 10.1063/5.0359651
License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/
Importance score: 87/100
The gist: Electron tunneling between sheets of bilayer Bernal graphene twisted at different small angles exhibits resonant peaks, steps…
Key concepts
- Twist Angle ($ heta$)
- This refers to the small angle at which two parallel BLG sheets are twisted relative to each other. This twist changes the momentum space of the electrons, causing a shift in their dispersion relations, which is crucial for observing tunneling features.
- Like vs. Unlike Bands
- The electronic states in bilayer graphene can be categorized into like bands (where electron-electron or hole-hole interactions dominate) and unlike bands (where conduction and valence states from different layers interact). The competition between these two types of bands dictates the tunneling current behavior.
- Sublayer Polarization
- When an electron tunnels, its wave function is polarized across the two graphene sublayers due to the electric field. This polarization strongly influences the tunneling probability, which is a key factor in enhancing regions of negative differential resistance.
Terminology
Summary
Electron tunneling between sheets of bilayer Bernal graphene twisted at different small angles exhibits resonant peaks, steps, and regions of negative differential resistance whose origin is explained by the intersections of energy- and momentum-shifted electron dispersions of adjacent layers <ref:2609. p. 001258#pg2>. A theoretical analysis demonstrates that understanding this phenomenon relies on the competition between like (conductivity-conductivity or valence-valence) and unlike (conductivity-valence) bands of parallel bilayer graphene sheets <ref:2609. p. 001258#pg4>. Polarization of the electron wave function across graphene sublayers caused by displacement field within bilayer graphene strongly affects tunneling probability, thus enhancing negative differential resistance due to Van Hove singularities at the band edges <ref:2609. p. 001258#pg5>.
Experimental Setup and Devices
The study presents an experimental and theoretical investigation of finite-bias tunneling in twisted heterostructures between Bernal BLG sheets with different twist angles <ref:2609.01258#pg6>. Two devices were studied with different twist angles: Device 1 with θ = 0. p. 113° and Device 2 with θ = 0. p. 173° <ref:2609. p. 001258#pg7>. Both devices utilize a dual-gate architecture to selectively dope each BLG with electrons or holes <ref:2609. p. 201258#pg8>. The tunneling occurs through intersections of electron dispersion surfaces in two spatially separated BLG sheets, which are displaced with respect to each other in energy (due to the bias voltage) and in momentum space (since crystal lattices are relatively twisted) <ref:2609. p. 101258#pg9>.
Theoretical Framework
The theoretical model accounts for the electrostatics of the dual-gated system, quantum capacitance effects, energy level broadening, finite temperature, self-consistent gap opening in each BLG, and tunneling matrix elements that depend on a distribution of electron wave function over graphene sublayers <ref:2609.01258#pg10>. The tunneling current is calculated using Fermi’s golden rule. p. 3 The relative momentum shift of electron states is connected to the twist angle θ as ∆K ≈ 4πθ/3a <ref:2609. p. 401258#pg9>.
Characteristics of Tunneling Transport
The analysis reveals two qualitatively different types of I-V characteristics: symmetric and asymmetric, depending on gate voltages. The symmetric characteristic emerges when carrier densities in both BLGs coincide at zero bias, and it shows resonant tunneling peaks followed by steps in the unlike-band current at larger threshold voltages <ref:2609. p. 201258#pg9>. The asymmetric characteristic occurs when the doping levels at Vb = 0 significantly differ, where the like-band current typically demonstrates a resonant peak when electron dispersions align, and the unlike-band current shows an asymmetric peak caused by the overlap of van Hove singularities <ref:2609. p. 501258#pg9>.
Effect of Twist Angle
The progression of tunneling current maps with increasing twist angle is shown to gradually transform from small twist angle maps to those similar to Device 2 with a larger twist angle. As θ increases, the resonant peaks of the like-band currents (Icc and Ivv) become wider and shift to larger Vb <ref:2609. p. 501258#pg9>. Conversely, the forbidden regions for unlike-band tunneling become wider at larger θ, although sublayer polarization complicates this structure. p. 5
Conclusion
The combination of momentum (due to the twist) and energy (due to the bias voltage) relative displacements of electron dispersions in two BLGs gives rise to diverse types of I-V characteristics depending on the gate voltages and on the twist angle <ref:2609.01258#pg9>. The analysis reveals two kinds of characteristics: symmetric when both BLGs are doped equally at zero bias, and asymmetric when the doping levels at zero bias significantly differ <ref:2609. p. 501258#pg9>. Both kinds of resonant current peaks give rise to negative differential resistance, which is of practical interest <ref:2609. p. 5 p. 5 p. 5 p. 501258#pg9>. The qualitative features discussed persist at larger twist angles, although resonant peaks become wider and forbidden regions for unlike-band current become wider. p. 5 p. 5 p. 5 p. 5 The theoretical model reproduces the measurements with reasonable accuracy and provides insight to the origin of observed features <ref:2609. p. 6 p. 6 p. 6 p. 601258#pg8>. The systematic analysis of tunneling current in different conditions and disclosure of its formation mechanisms may prove useful for finding the most pronounced regions of negative differential resistance <ref:2609. p. 6 p. 6 p. 6 p. 601258#pg8>. The paper concludes that the combination of momentum (due to the twist) and energy (due to the bias voltage) relative displacements of electron dispersions in two BLGs gives rise to diverse types of I-V characteristics depending on the gate voltages and on the twist angle <ref:2609. p. 4 p. 4 p. 401258#pg9>. The analysis reveals the existence of two kinds of characteristics: symmetric when both BLGs are doped equally at zero bias, and asymmetric when the doping levels at zero bias significantly differ <ref:2609. p. 5 p. 5 p. 501258#pg9>. Both kinds of resonant current peaks give rise to negative differential resistance, which is of practical interest <ref:2609.01258#pg9>. The qualitative features discussed persist at larger twist angles, although resonant peaks become wider and forbidden regions for unlike-band current become wider. The theoretical model reproduces the measurements with reasonable accuracy and provides insight to the origin of observed features <ref:2609.01258#pg8>. The systematic analysis of tunneling current in different conditions and disclosure of its formation mechanisms may prove useful for finding the most pronounced regions of negative differential resistance <ref:2609.01258#pg8>. The paper concludes that the combination of momentum (due to the twist) and energy (due to the bias voltage) relative displacements of electron dispersions in two BLGs gives rise to diverse types of I-V characteristics depending on the gate voltages and on the twist angle <ref:2609.01258#pg9>. The analysis reveals the existence of two kinds of characteristics: symmetric when both BLGs are doped equally at zero bias, and asymmetric when the doping levels at zero bias significantly differ <ref:2609.01258#pg9>. Both kinds of resonant current peaks give rise to negative differential resistance, which is of practical interest <ref:2609.01258#pg9>. The qualitative features discussed persist at larger twist angles, although resonant peaks become wider and forbidden regions for unlike-band current become wider. The theoretical model reproduces the measurements with reasonable accuracy and provides insight to the origin of observed features <ref:2609.01258#pg8>. The systematic analysis of tunneling current in different conditions and disclosure of its formation mechanisms may prove useful for finding the most pronounced regions of negative differential resistance <ref:2609.01258#pg8>. The paper concludes that the combination of momentum (due to the twist) and energy (due to the bias voltage) relative displacements of electron dispersions in two BLGs gives rise to diverse types of I-V characteristics depending on the gate voltages and on the twist angle <ref:2609.01258#pg9>. The analysis reveals the existence of two kinds of characteristics: symmetric when both BLGs are doped equally at zero bias, and asymmetric when the doping levels at zero bias significantly differ <ref:2609.01258#pg9>. Both kinds of resonant current peaks give rise to negative differential resistance, which is of practical interest <ref:2609.01258#pg9>. The qualitative features discussed persist at larger twist angles, although resonant peaks become wider and forbidden regions for unlike-band current become wider. The theoretical model reproduces the measurements with reasonable accuracy and provides insight to the origin of observed features <ref:2609.01258#pg8>. The systematic analysis of tunneling current in different conditions and disclosure of its formation mechanisms may prove useful for finding the most pronounced regions of negative differential resistance <ref:2609.01258#pg8>.
Key Findings
The paper highlights several key findings regarding the tunneling phenomena:
-
Tunneling occurs through intersections of electron dispersion surfaces in two spatially separated BLG sheets, which are displaced with respect to each other in energy (due to the bias voltage) and in momentum space (since crystal lattices are relatively twisted) <ref:2609. p. 101258#pg9>.
-
The tunneling channels consist of like-band tunneling, arising from intersections of like bands, and unlike-band tunneling, which opens a channel between conduction and valence bands in different BLGs <ref:2609. p. 201258#pg9>.
-
The existence of two qualitatively different types of I-V characteristics—symmetric and asymmetric—is determined by the gate voltages <ref:2609. p. 101258#pg9>.
-
Sublayer polarization of electron wave functions strongly enhances the peak of Ivv in the asymmetric characteristic, which is a key to understanding its origin <ref:2609. p. 301258#pg8>.
Detailed Analysis and Maps
The authors present detailed 2D maps of tunneling current and its derivative for both devices under equal-density and opposite-density diagonals. These maps resolve the current by initial (in top BLG) and final (in bottom BLG) electron band. p. 3 The comparison between calculated and experimental data generally agrees, reproducing all main qualitative features. p. 1
Model Validation
The theoretical model is validated by fitting the electrostatic parameters to reproduce the experimental data as close as possible <ref:2609.01258#pg8>. The calculation generally agrees with the experiments, reproducing all main qualitative features, although exact locations of the tunneling current maxima sometimes disagree due to approximations in modeling complicated electron dispersion <ref:2609. p. 501258#pg8>. The model successfully incorporates gap opening and sublayer polarization which were not accounted for in previous theoretical studies <ref:2609. p. 601258#pg8>.
Future Directions
The systematic analysis of tunneling current in different conditions and disclosure of its formation mechanisms may prove useful for finding the most pronounced regions of negative differential resistance and for studying the limits of tunneling current control using gates, gap opening, and wave function redistribution <ref:2609.01258#pg8>. The paper suggests that further study on larger twist angles is warranted to observe how features evolve. p. 1
Acknowledgements
The experimental work was supported by the Russian Science Foundation (Grant No. 23-12-00115-P) <ref:2609. p. 001258#pg8>. Acknowledgment for support for his work on the theoretical model from the Program of Basic Research of the Higher School of Economics is also noted <ref:2609. p. 601258#pg8>. Support for numerical calculations was acknowledged by A. p. 6F.A. <ref:2609.01258#pg8>. The description of sample preparation, description of the theoretical model, additional calculated and measured 2D maps of tunneling current and differential conductance, additional I-V characteristics, demonstration of the twist angle progression (PDF) are available in the Supporting Information Section S1 <ref:2609. p. 601258#pg8>. The Supporting Information is available free of charge at <ref:2609. p. 601258#pg8>.
References
(1) Geim, A. K.; Grigorieva, I. p. 6 V., Van der Waals heterostructures <ref:2609. p. 001258#pg8>.
(2) Novoselov, K. p. 6 S.; Mishchenko, A. p. 6; Carvalho, A. p. 6; Castro Neto, A. p. 6 H., 2D materials and van der Waals heterostructures <ref:2609. p. 001258#pg8>.
(3) Kim, S. p. 6; Jo, I.; Nah, J.; Yao, Z., Coulomb drag of massless fermions in graphene <ref:2609. p. 601258#pg8>.
(4) Gorbachev, R. p. 6 V.; Geim, A. K.; Katsnelson, M. p. 6 I., Strong Coulomb drag and broken symmetry in double-layer graphene <ref:2609. p. 601258#pg8>.
(5) Jiang, Y. p. 6; Chen, S.; Zheng, W. p. 6, Interlayer exciton formation, relaxation, and transport in TMD van der Waals heterostructures <ref:2609. p. 601258#pg8>.
(6) Regan, E. p. 6 C.; Wang, D.; Paik, E. Y., Emerging exciton physics in transition metal dichalcogenide heterobilayers <ref:2609. p. 601258#pg8>.
(7) Li, J. I.; Taniguchi, T. p. 6; Watanabe, K. p. 6 p. 6, Excitonic superfluid phase in double bilayer graphene <ref:2609. p. 601258#pg8>.
(8) Burg, G. p. 6 W.; Prasad, N. p. 6 p. 6; Kim, K., Strongly Enhanced Tunneling at Total Charge Neutrality in Double-Bilayer Graphene-WSe2 Heterostructures <ref:2609. p. 601258#pg8>.
(9) Nguyen, P. p. 6 X.; Ma, L.; Chaturvedi, R. p. 6, Perfect Coulomb drag in a dipolar excitonic insulator <ref:2609. p. 601258#pg8>.
(10) Shehabeldin, M. p. 6; Zhou, X.; Li, R., Light-controlled van der Waals tunnel junctions: mechanisms, architectures, functionalities, and opportunities <ref:2609. p. 601258#pg8>.
(11) Britnell, L. p. 6; Gorbachev, R. p. 6 V.; Geim, A. K., Resonant tunnelling and negative differential conductance in graphene transistors <ref:2609. p. 601258#pg8>.
(12) Mishchenko, A. p. 6 et al., Twist-controlled resonant tunnelling in graphene/boron nitride/graphene heterostructures <ref:2609. p. 601258#pg8>.
(13) Zhang, Z. p. 6; Zhang, B. p. 6 p. 6; Wang, Y., Toward High-Peak-to-Valley-Ratio Graphene Resonant Tunneling Diodes <ref:2609. p. 601258#pg8>.
(14) Zhang, Z. p. 6; Zhang, B.; Zhang, Y. p. 6, Toward high-currentdensity and high-frequency graphene resonant tunneling transistors <ref:2609. p. 701258#pg8>.
(15) Zhang, S. p. 6; Xu, Y.; Zhang, J. p. 6, Electrically Driven Plasmon-Polaritonic Bistability in Dirac Electron Tunneling Transistors <ref:2609. p. 701258#pg8>.
(16) Kuzmina, A. p. 7; Parzefall, M. p. 7; Back, P., Resonant Light Emission from Graphene/Hexagonal Boron Nitride/Graphene Tunnel Junctions <ref:2609. p. 701258#pg8>.
(17) McCann, E. p. 7; Koshino, M. p. 7, The electronic properties of bilayer graphene <ref:2609. p. 701258#pg8>.
(18) Vdovin, E. p. 7 E.; Khanin, Y. p. 7 N.; Morozov, S. p. 6 V., Manifestation of Layer-by-Layer Localization of van Hove Singularities in Tunneling between Bilayer Graphene Sheets <ref:2609. p. 701258#pg8>.
(19) Sokolik, A. p. 0 A.; Aminov, A. p. 7 F.; Vdovin, E. p. 7 E., Probing the features of electron dispersion by tunneling between slightly twisted bilayer graphene sheets <ref:2609. p. 701258#pg8>.
(20) Thompson, J. p. 7 J. P.; Leech, D. p. 7 J.; MuchaKruczyński, M. p. 7, Valley-polarized tunneling currents in bilayer graphene tunneling transistors <ref:2609. p. 701258#pg8>.
(21) Fallahazad, B. p. 7; Lee, K.; Kang, S., Gate-Tunable Resonant Tunneling in Double Bilayer Graphene Heterostructures <ref:2609. p. 701258#pg8>.
(22) Kim, K. p. 6; Yankowitz, M. p. 7; Fallahazad, B. p. 7 p. 7, van der Waals Heterostructures with High Accuracy Rotational Alignment <ref:2609. p. 701258#pg8>.
(23) Burg, G. p. 6 W.; Prasad, N.; Fallahazad, B., Coherent Interlayer Tunneling and Negative Differential Resistance with High Current Density in Double Bilayer Graphene–WSe2 Heterostructures <ref:2609. p. 701258#pg8>.
(24) De la Barrera, S. p. 7 C.; Feenstra, R. p. 7 M., Theory of resonant tunneling in bilayergraphene/hexagonal-boron-nitride heterostructures <ref:2609. p. 701258#pg8>.
(25) Prasad, N. p. 6; Burg, G. W.; Watanabe, K., Quantum Lifetime Spectroscopy and Magnetotunneling in Double Bilayer Graphene Heterostructures <ref:2609. p. 701258#pg8>.
(26) Kim, K. p. 6 S.; Kim, T.-H.; Walter, A. p. 7 L., Visualizing Atomic-Scale Negative Differential Resistance in Bilayer Graphene <ref:2609. p. 701258#pg8>.
(27) Joucken, F. p. 7; Bena, C.; Ge, Z., Sublattice Dependence and Gate Tunability of Midgap and Resonant States Induced by Native Dopants in BernalStacked Bilayer Graphene <ref:2609. p. 701258#pg8>.
Supporting Information Details
The Supporting Information details the sample preparation using a dry transfer method applied to micromechanically exfoliated layers of Bernal bilayer graphene (BLG) and hexagonal boron nitride (hBN). The theoretical model is described in detail in the Supporting Information Section S2 <ref:2609. p. 201258#pg8>.
Sample Preparation
The process began with mechanical exfoliation of bilayer Bernal graphene and hBN flakes on a Si/SiO2 substrate. The final van der Waals heterostructure was assembled layer by layer using a PC/PDMS stamp and finally transferred onto the target substrate. p. 9
Theoretical Model Details
The model uses Gauss theorem equations (S1) and (S2) to describe the electrostatic potential in each sublayer <ref:2609.01258#pg8>. The electron dispersion laws are based on a simplified model taking into account the dispersion hyperbolicity, electron-hole asymmetry, and gap opening <ref:2609. p. 101258#pg8>. The tunneling current is calculated using Fermi’s golden rule involvin… p. 3
Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.
Improvements for AI systems
-
Improved AI can accurately predict I-V characteristics of twisted double bilayer graphene heterostructures by incorporating theoretical models that account for
the competition between two contributions: between like (conductivity-conductivity or valence-valence) and unlike (conductivity-valence) bands of parallel bilayer graphene sheets.
-
The system can model the effect of sublayer polarization on tunneling probability, which is shown to
strongly affect the tunneling probability, thus enhancing negative differential resistance due to Van Hove singularities at the band edges.
This allows for more precise prediction of regions exhibiting negative differential resistance. -
The improved AI can analyze and reproduce two qualitatively different types of I-V characteristics—symmetric and asymmetric—depending on gate voltages, including their main features like
peaks, steps, and regions of negative differential resistance.
-
The system can predict the qualitative features observed in Device 2 at larger twist angles, specifically noting that
the resonant peaks of the like-band currents (Icc and Ivv) become wider and shift to larger Vb.
-
The AI can perform a systematic evolution analysis of tunneling current patterns with respect to the increase of the twist angle, as investigated in the study.
Sources
Related papers
- Coexistence of polariton bound states in the continuum and 2D radiative excitons
- Hidden Quantum-Geometric Connection between Injection and Shift Currents
- Specific absorption rate of uniaxial single-domain nanomagnets: stochastic spin dynamics versus linear response theory
- The ideal limit of rhombohedral graphene: Dynamical skyrmion lattices and their excitations
- Valley polarization of chiral excitonic bound states induced by band geometry
- On-Device Control of Electronic Friction