Estimating the ground-state hyperfine shifts of group-1 atoms due to long-range collisions, static electric fields, and nearby surfaces

arXiv:2608.28841 · physics.atom-ph · Submitted 2026-08-28 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Physics. The day in general physics: instruments, methods and results across the field.

Kai: We're looking at the paper: "Estimating the ground-state hyperfine shifts of group-1 atoms due to long-range collisions, static electric fields, and nearby surfaces".

Mira: Here's the gist of the paper. Estimating the ground-state hyperfine shifts of group-1 atoms due to long-range collisions, static electric fields, and nearby surfaces provides methods to estimate these shifts for various applications such as pressure shifts in vapor cells, Stark shifts, and wall shifts in nanoscale devices The results are relevant to pressure shifts in vapor cells, Stark shifts, and wall shifts in nanoscale devices The paper investigates how to estimate the shift due to a nearby conductive surface, extending previous work on non-reactive collisions and static electric fields In group-1 atoms, the hyperfine coupling between nuclear spin and valence electron leads to energy splittings that form the basis for atomic frequency standards Shifts of these frequencies are important to the accuracy and performance of many applications For example, pressure shifts due to collisions lead to a “pressure” shift and broadening of clock transitions in alkali-metal atoms The shift follows the change in the value of the wave function for the group-1 valence electron evaluated at the nucleus, or psigS(0) Previous work found a simple approach to estimate this shift deltaAg of the coupling Ag at large collision distances The characteristic energy, denoted as Ea, is estimated using both numerical calculation and scaling arguments The approach involves computing the final expression in Eq.

Kai: 5 This characteristic energy depends only on the properties of the group-1 atom Scaling arguments are used to check numerical results, such as relating Ea to the splitting ES between ground and first excited S states The scaling result for the alkali metals agrees well with values computed using exact scaling for textbook H Applications of Calculated Shifts The paper treats three specific applications in detail: wall shifts from nearby conductive surfaces, pressure shifts from long-range collisions, and Stark shifts from static electric fields For wall shifts, the shift is given by deltaAg,S ≈ − 2/Ea C3/R3 The surface interaction treats the van der Waals regime of dispersion forces For pressure shifts from long-range collisions, the shift is given by deltaAg,C ≈ − 2/Ea + 1/Eab C6/R6 Stark shifts in static electric fields are summarized by a coefficient k which can be calculated using either Eq.

Mira: 30 or Eq.

Kai: 31 Results and Discussion The numerical results for the characteristic energies Ea show that the fractional uncertainty is lowest for Na, around 3%, and highest for Fr, around 25% The ratio R = Ea/2ES is very nearly unity for all of the alkali metals For long-range collision shifts, the correction energy of Eq.

Paper summary: Kai: So, to summarize what this paper is doing in "Estimating the ground-state hyperfine shifts of group-one atoms due to long-range collisions, static electric fields, and nearby surfaces," they are investigating how various interactions perturb the hyperfine coupling in group one atoms <ref:2608.28841#pg1,Estimating the ground-state hyperfine shifts of group-1 atoms due to>.

Mira: They build on previous work that estimated shifts for non-reactive collisions and static electric fields by extending that approach to estimate the shift from a nearby conductive surface.

Lev: The thesis seems to be focused on improving those estimates by numerically computing updated values for the characteristic energies they use, which is what lets them extend the calculation to all group one atoms.

Kai: They investigate how to estimate these characteristic energies using scaling arguments and then check those numerical results against exact scaling calculations for textbook hydrogen atoms.

Mira: The paper claims that the first energy, E a, only depends on the properties of the group one atom, which is characteristic of that atom because it comes from a sum over all n S states with contributions from each excited S state coupling adding in parallel.

Lev: And they also introduce another energy, E ab, which appears in these shifts and corrects for more specific details about the interaction itself, like the choice of collision partner.

Kai: The results they get are relevant to pressure shifts in vapor cells, Stark shifts from static electric fields, and wall shifts in nanoscale devices. It connects atomic physics directly to these practical applications.

Mira: And they suggest how to adapt this approach for other applications too, which is pretty broad given the generality of the interaction form used.

Lev: What they actually show are three specific applications: wall shifts from nearby conductive surfaces, pressure shifts from long-range collisions, and Stark shifts in static electric fields.

Kai: The results they get are relevant to pressure shifts in vapor cells, Stark shifts, and wall shifts in nanoscale devices. It lays out the framework for estimating these effects across those three scenarios.

Mira: They provide a way to estimate these effects by treating them as either a second-order effect from surface interactions or a third-order effect from collisions and external electric fields.

Lev: The paper also provides specific equations for these shifts, like the wall shift being given by E ab C three over R cubed, where R is the distance.

Kai: So it sets up a way to calculate these things that depends on the distance and the atomic properties of group one atoms. This gives us a starting point for how much precision we can expect in these measurements.

Conclusion: Mira: Looking at this paper, "Estimating the ground-state hyperfine shifts of group-one atoms due to long-range collisions, static electric fields, and nearby surfaces," the authors show how different interactions perturb that coupling between nuclear spin and valence electron in group one atoms <ref:2608.28841#pg1,Estimating the ground-state hyperfine shifts of group-1 atoms due to>.

Kai: They establish a method for estimating these shifts by numerically computing updated values for characteristic energies used in the calculations.

Lev: The main implication is that they provide a framework to calculate shifts for three very different things: pressure shifts, Stark shifts, and wall shifts in nanoscale devices.

Mira: It boils down to finding how those atomic frequency changes affect measurements in vapor cells, Stark shift experiments, and when you have devices on the nanoscale near surfaces.

Kai: The paper suggests that these shifts can arise either as a second-order effect from surface interactions or a third-order effect from collisions and external electric fields.

Lev: They found good agreement with experimental results for the Stark shift coefficients k where they were available, with the exception of hydrogen atoms.

Mira: It’s a testable prediction they offer: wall shifts for group one atoms near conducting surfaces should be measurable using current techniques at distances R around zero point one micrometer.

Kai: So it points toward a practical measurement that we can actually try to achieve with our current tools, which is something I find very encouraging.

National Coalition of Independent Scholars

physics.atom-ph

Submitted: 2026-08-28

Updated: 2026-08-28

Comments: 17 pages, 2 figures

Journal ref: APS Open Sci. 1, 000199 (2026)

DOI: 10.1103/7c32-zttg

Code: https://github.com/olsenlab-science/group1-HFS

License: http://creativecommons.org/licenses/by-sa/4.0/

Importance score: 78/100

The gist: Estimating the ground-state hyperfine shifts of group-1 atoms due to long-range collisions, static electric fields…

Key concepts

Hyperfine Coupling
This is the interaction between the nuclear spin of an atom and its valence electron's spin. It causes energy splittings in the atom's energy levels, which form the basis for atomic frequency standards. Shifts in these frequencies are critical for precision applications.
Characteristic Energy ($E_a$)
This energy is calculated using both numerical methods and scaling arguments, depending only on the properties of group-1 atoms. It is a key parameter used to estimate the shift due to various interactions, such as collisions or surface proximity.
Wall Shift ($\delta A_{g,S}$)
This shift describes how the ground-state hyperfine coupling changes when a group-1 atom is near a conductive surface. The shift is proportional to $C_3/R^3$, where R is the distance from the surface. This effect can be measured using current techniques for distances around 0.1 $\mu$m.
Stark Shift Coefficient ($k$)
This coefficient summarizes the shift caused by static electric fields on group-1 atoms. It can be calculated using specific equations (Eq. 30 or Eq. 31) and its agreement with experimental results is compared to validate the theoretical model.

Terminology

Summary

Estimating the ground-state hyperfine shifts of group-1 atoms due to long-range collisions, static electric fields, and nearby surfaces provides methods to estimate these shifts for various applications such as pressure shifts in vapor cells, Stark shifts, and wall shifts in nanoscale devices The results are relevant to pressure shifts in vapor cells, Stark shifts, and wall shifts in nanoscale devices

Introduction to Hyperfine Shifts

The paper investigates how to estimate the shift due to a nearby conductive surface, extending previous work on non-reactive collisions and static electric fields In group-1 atoms, the hyperfine coupling between nuclear spin and valence electron leads to energy splittings that form the basis for atomic frequency standards Shifts of these frequencies are important to the accuracy and performance of many applications For example, pressure shifts due to collisions lead to a “pressure” shift and broadening of clock transitions in alkali-metal atoms The shift follows the change in the value of the wave function for the group-1 valence electron evaluated at the nucleus, or psigS(0) Previous work found a simple approach to estimate this shift deltaAg of the coupling Ag at large collision distances

Methodology for Estimating Characteristic Energies

The characteristic energy, denoted as Ea, is estimated using both numerical calculation and scaling arguments The approach involves computing the final expression in Eq. 5 This characteristic energy depends only on the properties of the group-1 atom Scaling arguments are used to check numerical results, such as relating Ea to the splitting ES between ground and first excited S states The scaling result for the alkali metals agrees well with values computed using exact scaling for textbook H

Applications of Calculated Shifts

The paper treats three specific applications in detail: wall shifts from nearby conductive surfaces, pressure shifts from long-range collisions, and Stark shifts from static electric fields For wall shifts, the shift is given by deltaAg,S ≈ − 2/Ea C3/R3 The surface interaction treats the van der Waals regime of dispersion forces For pressure shifts from long-range collisions, the shift is given by deltaAg,C ≈ − 2/Ea + 1/Eab C6/R6 Stark shifts in static electric fields are summarized by a coefficient k which can be calculated using either Eq. 30 or Eq. 31

Results and Discussion

The numerical results for the characteristic energies Ea show that the fractional uncertainty is lowest for Na, around 3%, and highest for Fr, around 25% The ratio R = Ea/2ES is very nearly unity for all of the alkali metals For long-range collision shifts, the correction energy of Eq. 21 is estimated as Eab ≈ 2e2/r2a/[3alphaa(0)] The agreement using Eq. p. 7

Where the paper says it

We revised this approach to provide updated values for those atoms, and extended it to provide values for the remaining group-1 atoms H, Li, and Fr. Additionally, to check these numerical results, we estimated 𝐸𝑎 using a scaling approach.

31 for Stark shift coefficients k is comparable to experimental results, with the exception of H

Testable Predictions and Future Work

A testable prediction is the wall shift for group-1 atoms near conducting surfaces The work suggests that these shifts should be measurable using current techniques for achievable wall distances of R ≈ 0.1 μm Future work will extend the approach to other interactions and applications The derivations require only a modest set of conditions on the form of the interactions, so are fairly general

Conclusion

In this article, we treated three scenarios that lead to shifts of the ground-state hyperfine coupling in group-1 atoms with the particular form of Eq. 1 We showed how such shifts can arise as either a second-order effect (i. p. 1

Where the paper says it

II outlines how interactions can produce shifts with the form of Eq. 1 through either second- or third-order perturbations.

e., surface interactions) or as a third-order effect (i. p. 1
Where the paper says it

II outlines how interactions can produce shifts with the form of Eq. 1 through either second- or third-order perturbations.

e., collisions and external electric fields) In all cases, a characteristic energy Ea appears that depends only on the properties of the group-1 atom For third-order shifts, another energy Eab appears that corrects for additional details of the interaction (e. p. 2
Where the paper says it

Below, we will use 𝑈 to model an interaction with either another particle during a collision, an external electric field, or a nearby surface. To handle all three cases, let us proceed by assuming a colliding partner, and denoting the state of the colliding pair as |𝜇𝜈⟩ = |𝜇⟩𝑎 ⊗ |𝜈⟩𝑏 , with the group-1 atom “𝑎” in eigenstate 𝜇 and perturbing particle “𝑏” in state 𝜈, with corresponding energy 𝐸𝜇𝜈, and joint ground state |00⟩.

g., choice of collision partner) We found good agreement with experimental results for k, where available, and provided a testable prediction of hyperfine shifts near surfaces

Acknowledgments

B. A. O. acknowledges support from the M. J. Murdock Charitable Trust, and the National Science Foundation through Grant No PHY-2418777

Data Availability

The data that support the findings of this article are openly available in the Zenodo repository at 10.5281/zenodo.22149598, and an updated version is available in a github repository

Appendix A

Table V provides some reference values used in our calculations for the group-1 atoms The ground-state principal quantum number g and effective quantum number g∗ appear in expressions in Sec. III B The value of ⟨gSr2gS⟩ for textbook H is exact, while the others are calculated using RHF approximate wave functions

Table I

Table I summarizes our results for the characteristic energies Ea The resulting numerically calculated ratios Ea/2ES ≈ 1, which we confirmed using scaling argument as shown

Table II

Table II summarizes calculations of the hyperfine shifts for group-1 atoms due to interaction with a conducting surface at a chosen distance of R = 0.1 μm The predicted shifts of a representative clock frequency, delta fclock = (I + 1/2)deltaAg/h, fall in the Hz to tens of Hz range for this distance

Table III

Table III summarizes values of the correction energies Eab for collisions between group-1 atoms and group-18 (noble gas) atoms The listed uncertainties are due to C3 and C6 from Ref. 50

Table IV

Table IV summarizes calculations of the Stark-shift coefficients k computed using Eqs. 30 and 31 The values computed using Eq. p. 8

Where the paper says it

For more on the scaling of these elements, see the next section. Together, using these experimental, calculated, and extrapolated values, we computed the energy 𝐸𝑎 for each group-1 atom by summing terms up to 𝑛 = 500.

p. 8
Where the paper says it

For more on the scaling of these elements, see the next section. Together, using these experimental, calculated, and extrapolated values, we computed the energy 𝐸𝑎 for each group-1 atom by summing terms up to 𝑛 = 500.

p. 8
Where the paper says it

For more on the scaling of these elements, see the next section. Together, using these experimental, calculated, and extrapolated values, we computed the energy 𝐸𝑎 for each group-1 atom by summing terms up to 𝑛 = 500.

p. 8
Where the paper says it

For more on the scaling of these elements, see the next section. Together, using these experimental, calculated, and extrapolated values, we computed the energy 𝐸𝑎 for each group-1 atom by summing terms up to 𝑛 = 500.

p. 8
Where the paper says it

For more on the scaling of these elements, see the next section. Together, using these experimental, calculated, and extrapolated values, we computed the energy 𝐸𝑎 for each group-1 atom by summing terms up to 𝑛 = 500.

p. 8
Where the paper says it

For more on the scaling of these elements, see the next section. Together, using these experimental, calculated, and extrapolated values, we computed the energy 𝐸𝑎 for each group-1 atom by summing terms up to 𝑛 = 500.

30 all agree, as expected, with previous calculations using the same expression in Ref. p. 7
Where the paper says it

These effective quantum numbers are expected to vary as 𝑛 ∗ ≈ 𝑛 − 𝛿0 . (33) This expression is exact for textbook H, with S-state quantum defect 𝛿0 = 0 [60].

p. 7
Where the paper says it

These effective quantum numbers are expected to vary as 𝑛 ∗ ≈ 𝑛 − 𝛿0 . (33) This expression is exact for textbook H, with S-state quantum defect 𝛿0 = 0 [60].

p. 7
Where the paper says it

These effective quantum numbers are expected to vary as 𝑛 ∗ ≈ 𝑛 − 𝛿0 . (33) This expression is exact for textbook H, with S-state quantum defect 𝛿0 = 0 [60].

p. 7
Where the paper says it

These effective quantum numbers are expected to vary as 𝑛 ∗ ≈ 𝑛 − 𝛿0 . (33) This expression is exact for textbook H, with S-state quantum defect 𝛿0 = 0 [60].

p. 7
Where the paper says it

These effective quantum numbers are expected to vary as 𝑛 ∗ ≈ 𝑛 − 𝛿0 . (33) This expression is exact for textbook H, with S-state quantum defect 𝛿0 = 0 [60].

p. 7
Where the paper says it

These effective quantum numbers are expected to vary as 𝑛 ∗ ≈ 𝑛 − 𝛿0 . (33) This expression is exact for textbook H, with S-state quantum defect 𝛿0 = 0 [60].

30

Table V

Table V provides some reference values used in our calculations for the group-1 atoms The ground-state principal quantum number g and effective quantum number g∗ appear in expressions in Sec. III B The value of ⟨gSr2gS⟩ for textbook H is exact, while the others are calculated using RHF approximate wave functions

Table II (Second instance)

Table II summarizes calculations of the hyperfine shifts for group-1 atoms due to interaction with a conducting surface at a chosen distance of R = 0.1 μm computed using Eq. p. 8

Where the paper says it

For more on the scaling of these elements, see the next section. Together, using these experimental, calculated, and extrapolated values, we computed the energy 𝐸𝑎 for each group-1 atom by summing terms up to 𝑛 = 500.

p. 8
Where the paper says it

For more on the scaling of these elements, see the next section. Together, using these experimental, calculated, and extrapolated values, we computed the energy 𝐸𝑎 for each group-1 atom by summing terms up to 𝑛 = 500.

p. 8
Where the paper says it

For more on the scaling of these elements, see the next section. Together, using these experimental, calculated, and extrapolated values, we computed the energy 𝐸𝑎 for each group-1 atom by summing terms up to 𝑛 = 500.

p. 8
Where the paper says it

For more on the scaling of these elements, see the next section. Together, using these experimental, calculated, and extrapolated values, we computed the energy 𝐸𝑎 for each group-1 atom by summing terms up to 𝑛 = 500.

p. 8
Where the paper says it

For more on the scaling of these elements, see the next section. Together, using these experimental, calculated, and extrapolated values, we computed the energy 𝐸𝑎 for each group-1 atom by summing terms up to 𝑛 = 500.

p. 8
Where the paper says it

For more on the scaling of these elements, see the next section. Together, using these experimental, calculated, and extrapolated values, we computed the energy 𝐸𝑎 for each group-1 atom by summing terms up to 𝑛 = 500.

14 The predicted shifts of a representative clock frequency, delta fclock = (I+1/2)deltaAg/h fall in the Hz to tens of Hz range for this distance

Table III (Second instance)

Table III summarizes values of the correction energies Eab for collisions between group-1 atoms and group-18 (noble gas) atoms The listed uncertainties are due to C3 and C6 from Ref. 50

Table IV (Second instance)

Table IV summarizes calculations of the Stark-shift coefficients k computed using Eqs. 30 and 31 The values computed using Eq. 30 all agree, as expected, with previous calculations using the same expression in Ref. 30

Table V (Second instance)

Table V provides some reference values used in our calculations for the group-1 atoms The ground-state principal quantum number g and effective quantum number g∗ appear in expressions in Sec. III B The value of ⟨gSr2gS⟩ for textbook H is exact, while the others are calculated using RHF approximate wave functions

Table I (Second instance)

Table I summarizes our results for the characteristic energies Ea estimated using Eq. 5 The resulting numerically calculated ratios Ea/2ES ≈ 1, which we confirmed using scaling argument as shown

Table II (Third instance)

Table II summarizes calculations of the hyperfine shifts for group-1 atoms due to interaction with a conducting surface at a chosen distance of R = 0.1 μm computed using Eq. 14 The predicted shifts of a representative clock frequency, delta fclock = (I+1/2)deltaAg/h fall in the Hz to tens of Hz range for this distance

Table III (Third instance)

Table III summarizes values of the correction energies Eab for collisions between group-1 atoms and group-18 (noble gas) atoms The listed uncertainties are due to C3 and C6 from Ref. 50

Table IV (Third instance)

Table IV summarizes calculations of the Stark-shift coefficients k computed using Eqs. 30 and 31 The values computed using Eq. 30 all agree, as expected, with previous calculations using the same expression in Ref. 30

Table V (Third instance)

Table V provides some reference values used in our calculations for the group-1 atoms The ground-state principal quantum number g and effective quantum number g∗ appear in expressions in Sec. III B The value of ⟨gSr2gS⟩ for textbook H is exact, while the others are calculated using RHF approximate wave functions

Table I (Third instance)

Table I summarizes our results for the characteristic energies Ea estimated using Eq. 5 The resulting numerically calculated ratios Ea/2ES ≈ 1, which we confirmed using scaling argument as shown

Table II (Fourth instance)

Table II summarizes calculations of the hyperfine shifts for group-1 atoms due to interaction with a conducting surface at a chosen distance of R = 0.1 μm computed using Eq. 14 The predicted shifts of a representative clock frequency, delta fclock = (I+1/2)deltaAg/h fall in the Hz to tens of Hz range for this distance

Table III (Fourth instance)

Table III summarizes values of the correction energies Eab for collisions between group-1 atoms and group-18 (noble gas) atoms The listed uncertainties are due to C3 and C6 from Ref. 50

Table IV (Fourth instance)

Table IV summarizes calculations of the Stark-shift coefficients k computed using Eqs. 30 and 31 The values computed using Eq. 30 all agree, as expected, with previous calculations using the same expression in Ref. 30

Table V (Fourth instance)

Table V provides some reference values used in our calculations for the group-1 atoms The ground-state principal quantum number g and effective quantum number g∗ appear in expressions in Sec. III B The value of ⟨gSr2gS⟩ for textbook H is exact, while the others are calculated using RHF approximate wave functions

Table I (Fourth instance)

Table I summarizes our results for the characteristic energies Ea estimated using Eq. 5 The resulting numerically calculated ratios Ea/2ES ≈ 1, which we confirmed using scaling argument as shown

Table II (Fifth instance)

Table II summarizes calculations of the hyperfine shifts for group-1 atoms due to interaction with a conducting surface at a chosen distance of R = 0.1 μm computed using Eq. 14 The predicted shifts of a representative clock frequency, delta fclock = (I+1/2)deltaAg/h fall in the Hz to tens of Hz range for this distance

Table III (Fifth instance)

Table III summarizes values of the correction energies Eab for collisions between group-1 atoms and group-18 (noble gas) atoms The listed uncertainties are due to C3 and C6 from Ref. 50

Table IV (Fifth instance)

Table IV summarizes calculations of the Stark-shift coefficients k computed using Eqs. 30 and 31 The values computed using Eq. 30 all agree, as expected, with previous calculations using the same expression in Ref. 30

Table V (Fifth instance)

Table V provides some reference values used in our calculations for the group-1 atoms The ground-state principal quantum number g and effective quantum number g∗ appear in expressions in Sec. III B The value of ⟨gSr2gS⟩ for textbook H is exact, while the others are calculated using RHF approximate wave functions

Table I (Sixth instance)

Table I summarizes our results for the characteristic energies Ea estimated using Eq. 5 The resulting numerically calculated ratios Ea/2ES ≈ 1, which we confirmed using scaling argument as shown

Table II (Sixth instance)

Table II summarizes calculations of the hyperfine shifts for group-1 atoms due to interaction with a conducting surface at a chosen distance of R = 0.1 μm computed using Eq. 14 The predicted shifts of a representative clock frequency, delta fclock = (I+1/2)deltaAg/h fall in the Hz to tens of Hz range for this distance

Table III (Sixth instance)

Table III summarizes values of the correction energies Eab for collisions between group-1 atoms and group-18 (noble gas) atoms The listed uncertainties are due to C3 and C6 from Ref. 50

Table IV (Sixth instance)

Table IV summarizes calculations of the Stark-shift coefficients k computed using Eqs. 30 and 31 The values computed using Eq. 30 all agree, as expected, with previous calculations using the same expression in Ref. 30

Table V (Sixth instance)

Table V provides some reference values used in our calculations for the group-1 atoms The ground-state principal quantum number g and effective quantum number g∗ appear in expressions in Sec. III B The value of ⟨gSr2gS⟩ for textbook H is exact, while the others are calculated using RHF approximate wave functions

Table I (Seventh instance)

Table I summarizes our results for the characteristic energies Ea estimated using Eq. 5 The resulting numerically calculated ratios Ea/2ES ≈ 1, which we confirmed using scaling argument as shown

Table II (Seventh instance)

Table II summarizes calculations of the hyperfine shifts for group-1 atoms due to interaction with a conducting surface at a chosen distance of R = 0.1 μm computed using Eq. 14 The predicted shifts of a representative clock frequency, delta fclock = (I+1/2)deltaAg/h fall in the Hz to tens of Hz range for this distance

Table III (Seventh instance)

Table III summarizes values of the correction energies Eab for collisions between group-1 atoms and group-18 (noble gas) atoms The listed uncertainties are due to C3 and C6 from Ref.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Improved prediction of pressure shifts in vapor cells by providing updated values for characteristic energies Ea for group-1 atoms, including H, Li, and Fr. This allows AI systems modeling atomic clocks or vapor cell performance to accurately estimate pressure shifts by using the updated values for Na–Cs from the paper.

  2. Accurate estimation of Stark shift coefficients k due to static electric fields across all group-1 atoms using both forms of Eq. 30 and Eq. 31, with agreement to experimental results where available up to the same exception for H. AI systems can now calculate precise shift coefficients for various alkali atoms under static electric fields, improving the accuracy of precision measurements.

  3. Prediction of wall shifts from nearby conductive surfaces by providing a testable prediction based on Eq. 14, which is useful for experiments with cold atoms near surfaces at distances around R equals 0.1 micrometers. This enables AI systems to model and predict measurable hyperfine shifts in nanoscale devices and vapor cells more reliably than previous estimates.

  4. Calculation of correction energies Eab for collisions between group-1 atoms and noble gas atoms, which all satisfy Eab greater than Ea/2, allowing AI systems to better account for the details of collision interactions in pressure shift modeling. This provides a more complete picture of long-range interaction potentials relevant to cold atom scattering and magnetoassociation.

  5. Refined calculation of the dimensionless ratio R equals Ea over two times ES, which shows that it is very nearly unity for all of the alkali metals, suggesting an important role for fine details in radial wave functions. AI systems can use this insight to improve their methods for estimating characteristic energies Ea by focusing on radial wave function details, such as those between CA and RHF functions.

Abstract

Many interactions perturb (or shift) the hyperfine coupling in group-1 atoms between their nuclear spin and single valence electron. Previous work provided an approach to estimate this shift for non-reactive collisions with other atoms or molecules at long range, and extended it to estimate the shift from static electric fields. We further extend this approach to estimate the shift due to a nearby conductive surface, and improve all these estimates by numerically computing updated values for the characteristic energies they use. We investigate how to estimate these energies by scaling arguments, and suggest how to adapt the approach to other applications. The results are relevant to pressure shifts in vapor cells, Stark shifts, and wall shifts in nanoscale devices.

Sources

Related papers