White-Light Matter-Wave Interferometry

arXiv:2606.11747 · physics.atom-ph · Submitted 2026-06-10 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Physics. The day in general physics: instruments, methods and results across the field.

Kai: We're looking at the paper: "White-Light Matter-Wave Interferometry".

Mira: Here's the gist of the paper. White-light interferometry enables ambiguity-free localization by synthesizing interference envelopes from multiple optical wavelengths, but no analogous capability has been realized for coherent matter waves.

Kai: Here we report the first experimental demonstration of multi-wavelength atom interferometry, establishing the matter-wave counterpart of white-light interferometry.

Mira: By exploiting counter-propagating atomic beams as multi-wavelength matterwave sources and synthesizing interference envelopes from their spectral components, we realize inertial measurements based on envelope localization rather than conventional fringe-phase estimation.

Kai: The resulting multi-scale interferometric response provides ambiguity-free operation, a well-defined rotational scale factor, and reduced sensitivity to initial phase bias.

Paper summary: Kai: So to recap this is about white-light interferometry applied to matter waves. The core thesis is that by synthesizing interference envelopes from multiple velocity classes of atomic beams, you can get ambiguity-free localization for inertial measurements.

Mira: It's positioning this new technique as the matter-wave version of white-light interferometry, which was successful with light but hasn't been done for coherent matter waves before.

Kai: The key is exploiting counter-propagating atomic beams as these multi-wavelength sources and combining their spectral components to form a continuous spectrum of effective wavelengths.

Mira: This synthesis allows them to realize inertial measurements based on envelope localization instead of the usual single fringe or phase estimation approach. They argue this gives you ambiguity-free operation and a well-defined rotational scale factor.

Lev: I'm wondering about the assumption here—that you can treat these velocity classes as a continuum of wavelengths that form a white-light source. Does that assumption hold up when we talk about the physical realization in terms of atomic beam dynamics?

Kai: That is the fundamental mechanism they use, where each velocity class defines a de Broglie wavelength equal to h divided by mass times velocity. They then integrate over all those velocity classes to get that total multi-wavelength interference signal.

Mira: But what about the assumptions hidden in that integration? The paper claims this works because of the superposition of contributions from all classes, but you have to assume a very smooth and continuous distribution of those velocities.

Lev: If the atomic beam isn't perfectly uniform in its velocity distribution, how much does that impact the accuracy of extracting those dual peaks for rotation and acceleration?

Kai: The paper suggests that the resulting multi-scale interferometric response provides a coarse, unambiguous estimator of the inertial signal through those envelope peak positions while still preserving high-resolution phase information in the underlying fringes.

Mira: So you have this coarse estimate for absolute position from the envelope, but then you keep the fine measurement precision from those underlying fringes, which is a powerful combination.

Lev: That sounds like a trade-off between speed of measurement and accuracy of the final result; how do they quantify that balance in terms of noise or error propagation?

Conclusion: Kai: So looking at the full picture, this work by Jia, Xin, Shen, and Feng establishes a new framework for atom interferometry where inertial information is encoded in that multi-scale matter-wave interference envelope.

Mira: It moves beyond the limitations of conventional atom interferometers by overcoming that intrinsic half-fringe ambiguity and introducing a new degree of freedom through the controlled use of spectral diversity.

Kai: The main implication is that we have a new way to perform precision sensing, which could be useful in geodesy or inertial navigation. They’ve also shown this approach yields a velocity-independent rotational scale factor, which is pretty neat.

Mira: It really extends the concept of white-light interferometry into coherent matter waves, suggesting that spectral diversity in a matter wave source is a powerful tool for sensing.

Lev: I think the real change is the concept itself—moving from mapping everything onto a single periodic observable to using an envelope structure to store position information while keeping precision hidden underneath.

Kai: That's right, it's about getting two different pieces of information out of one measurement without sacrificing either. And they did it experimentally with 87Rb atoms, which gives us a concrete benchmark for what this looks like in practice <ref:2606.11747#pg2>.

Mira: It sets a foundation for a new class of atom-optical interferometers that could lead to much more robust and versatile sensors in the future.

Knows Lab, Department of Precision Instruments, Tsinghua University

physics.atom-ph

Submitted: 2026-06-10

Updated: 2026-11-12

Comments: 13 pages,5 figures

License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/

Importance score: 98/100

The gist: White-light interferometry enables ambiguity-free localization by synthesizing interference envelopes from multiple optical wavelengths…

Key concepts

White-Light Matter Wave Source
This concept treats the velocity distribution of atomic beams as a continuum of effective matter-wave wavelengths. Each distinct velocity class generates a different de Broglie wavelength, creating a continuous spectrum analogous to broadband light in optical interferometry. This ensemble forms the physical basis for multi-wavelength matter-wave interference.
Envelope Localization
Instead of reading conventional fringes, this technique focuses on synthesizing the entire interference envelope. The peak positions of this envelope serve as robust observables that encode inertial information in a non-periodic way. This coarse estimation provides unambiguous positioning while the underlying fringes maintain high measurement precision.
Ambiguity Resolution
Conventional atom interferometers suffer from a fundamental half-fringe ambiguity in phase readout. Multi-wavelength sensing resolves this by using the multi-scale envelope structure. By summing and differencing dual peak positions, rotation and acceleration can be directly decoupled, eliminating the phase bias limitations inherent in standard open-loop systems.

Terminology

Summary

White-light interferometry enables ambiguity-free localization by synthesizing interference envelopes from multiple optical wavelengths, but no analogous capability has been realized for coherent matter waves. p. 0 Here we report the first experimental demonstration of multi-wavelength atom interferometry, establishing the matter-wave counterpart of white-light interferometry. p. 0 By exploiting counter-propagating atomic beams as multi-wavelength matterwave sources and synthesizing interference envelopes from their spectral components, we realize inertial measurements based on envelope localization rather than conventional fringe-phase estimation. p. 0 The resulting multi-scale interferometric response provides ambiguity-free operation, a well-defined rotational scale factor, and reduced sensitivity to initial phase bias. p. 0 As a proof of principle, we demonstrate simultaneous dual-axis rotation and acceleration sensing and directly resolve the phase ambiguity that fundamentally limits conventional open-loop atom interferometers. p. 0

Fundamental Mechanism

The core concept involves exploiting the velocity distribution of atomic beams as a continuum of effective matter-wave wavelengths, which forms a white-light matter-wave source. Each velocity class corresponds to a distinct de Broglie wavelength defined as lambda = h/mv and thus contributes an interferometric signal with a different effective phase evolution. p. 1 The ensemble therefore forms a continuous spectrum of effective wavelengths, analogous to a broadband source in optical interferometry, which serves as the physical basis for multi-wavelength matter-wave interference. p. 1 The multi-wavelength interference signal arises from the superposition of contributions from all velocity classes through the integral S = ∫∞−∞ S(v) dv. p. 2

Ambiguity Resolution via Envelope Localization

The synthesis of a matter-wave interference envelope introduces a multi-scale interferometric structure where the envelope determines the absolute position while the underlying fringes preserve measurement precision. This envelope provides a coarse, unambiguous estimator of the inertial signal, while the underlying fringes retain high-resolution phase information. p. 2 The peak positions of the envelopes serve as robust observables that encode the inertial information in a non-periodic manner, thereby avoiding the ambiguity inherent to conventional fringe or phase readout. p. 4 By summing and differencing dual peak-positions, rotation omega and acceleration a can be decoupled directly. p. 4

Experimental Advantages

The proposed approach offers several fundamental advantages compared to conventional atom-interferometric schemes based on single-phase readout. These advantages include:

  1. Unambiguous inertial measurement with suppressed dephasing, as the velocity-dependent phase dispersion is harnessed to form a multi-wavelength envelope. p. 4

  2. Velocity-independent rotational scale factor, because the modulation phase term 4πδfL/v and the rotation-induced phase term-2keffΩL/v share the same velocity dependence. p. 4

  3. Reduced sensitivity to interferometric phase bias, as the multi-wavelength envelope-based inertial sensing scheme effectively suppresses velocity-independent non-inertial phase contributions. p. 4

Performance and Validation

Experimentally, simultaneous dual-axis measurements of rotation and acceleration were realized using transversely cooled 87Rb atomic beams in a Mach–Zehnder configuration. The resulting peak separation exhibits a linear dependence on the rotation rate, yielding a scale factor of 12071. p. 66 Hz/(◦/s), in good agreement (0. p. 606% deviation) with the theoretical prediction keff L 2π. p. 6 Furthermore, the scheme extends the dynamic range by two orders of magnitude compared to conventional half-fringe limits. p. 6 The long-term stability at an averaging time of 15,000 s reached 93 ppm with respect to the Earth’s rotation rate. p. 0

Conclusion

We have experimentally demonstrated multi-wavelength atom interferometry based on a broadband atomic beam, establishing a new interferometric framework in which inertial information is encoded in the envelope of a multi-scale matter-wave interference signal. This approach overcomes the intrinsic half-fringe ambiguity of atom interferometers and demonstrates a velocity-independent rotational scale factor. p. 8 Multi-wavelength atom interferometry extends the concept of white-light interferometry to coherent matter waves, introducing a new degree of freedom for matter-wave interferometric measurement through the controlled use of spectral (velocity) diversity. p. 8 The work establishes a foundation for a new class of atom-optical interferometers and opens new opportunities for precision sensing, metrology, geodesy, and inertial navigation. p. 8

References

[1] K. Bongs et al., “Taking atom interferometric quantum sensors from the laboratory to real-world applications,” Nat. p. 9 Rev. Phys. 1, 731–739 (2019). p. 9

[2] F. A. Narducci et al. p. 9, “Advances toward fieldable atom interferometers,” Adv. p. 9 Physics: X 7, 1946426 (2022). p. 9

[3] S. Al-Chalabi et al. p. 9, “Partially coherent sources in interferometric sensors,” in First International Conference on Optical Fibre Sensors, (1983), pp. p. 9 26–28.

[4] P. Hariharan and M. p. 9 Roy, “White-light phase-stepping interferometry for surface profiling,” J. p. 9 Mod. Opt. 41, 2197–2201 (1994). p. 9

[5] A. Harasaki and J. p. 9 C. Wyant, “Fringe modulation skewing effect in white-light vertical scanning interferometry,” Appl. p. 9 Opt. 39, 2101–2106 (2000). p. 9

[6] C. Gomez et al., “Noise reduction in coherence scanning interferometry for surface topography measurement,” Nanomanuf. p. 9 Metrol. 3, 68–76 (2020). p. 9

[7] J. Lautier et al. p. 9, “Hybridizing matter-wave and classical accelerometers,” Appl. p. 9 Phys. Lett. 105, 144102 (2014). p. 9

[8] S. Merlet et al., “Operating an atom interferometer beyond its linear range,” Metrologia 46, 87 (2009). p. 9

[9] P. Cheiney et al. p. 9, “Navigation-compatible hybrid quantum accelerometer using a kalman filter,” Phys. p. 9 Rev. Appl. 10, 034030 (2018). p. 9

[10] A. Bonnin et al., “New concepts of inertial measurements with multi-species atom interferometry,” Appl. p. 9 Phys. B 124, 181 (2018). p. 9

[11] C. Avinadav et al. p. 9, “Composite-Fringe Atom Interferometry for HighDynamic-Range Sensing,” Phys. p. 9 Rev. Appl. 13, 054053 (2020). p. 9

[12] D. Yankelev et al. p. 9, “Atom interferometry with thousand-fold increase in dynamic range,” Sci. p. 9 Adv. (2020).

[13] A. T. Black and J. p. 9 M. Kwolek, “Velocity-modulated atom interferometry with enhanced dynamic range,” in Quantum Sensing, Imaging, and Precision Metrology, vol. p. 9 12447 (SPIE, 2023), pp. p. 9 179–183.

[14] H.-H. Chen et al. p. 0, “Self-calibrated atom-interferometer gyroscope by modulating atomic velocities,” Rev. p. 9 Sci. Instrum. 95 (2024).

[15] Q. d’Armagnac de Castanet et al. p. 9, “Atom interferometry at arbitrary orientations and rotation rates,” Nat. p. 9 Commun. 15, 6406 (2024). p. 9

[16] T. Sato et al., “Closed-loop measurements in an atom-interferometer gyroscope with compensation for velocity-dependent phase dispersion,” Phys. p. 9 Rev. Appl. 23, 044001 (2025). p. 9

[17] W.-C. Jia et al., “Closed-loop dual-channel atomic beam interferometry beyond the half-fringe limit,” arXiv preprint arXiv:2603. p. 914777 (2026). p. 9

[18] M. Kasevich and S. p. 9 Chu, “Atomic interferometry using stimulated raman transitions,” Phys. p. 9 Rev. Lett. 67, 181 (1991). p. 9

[19] P.-Q. Yan et al., “A continuous dual-axis atomic interferometric inertial sensor,” IEEE Trans. p. 9 Instrum. Meas. 74, 1–11 (2025). p. 9

[20] D. Durfee et al., “Long-term stability of an area-reversible atom-interferometer sagnac gyroscope,” Phys. p. 9 Rev. Lett. 97, 240801 (2006). p. 9

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Enhanced inertial sensing capability through multi-wavelength atom interferometry allows for unambiguous dual-axis rotation and acceleration sensing by synthesizing interference envelopes from multiple optical wavelengths. This enables a well-defined rotational scale factor and substantially reduces sensitivity to initial phase offsets compared to conventional atom interferometers.

  2. Development of an ambiguity free readout mechanism that maps inertial quantities onto envelope peak positions, which avoids the intrinsic ambiguity between measurement sensitivity and unambiguous range found in conventional single-fringe interferometers. This transforms the interferometer into a multi-scale information-processing framework.

  3. Improved long term stability of rotation measurements by introducing a velocity independent rotational scale factor, which is achieved through an intrinsic cancellation of velocity dependence, suppressing sensitivity to velocity drifts and improving stability.

  4. Enhanced robustness against systematic errors such as initial phase bias, light shifts, and intensity fluctuations by demonstrating that the envelope peak position is insensitive to initial phase variations and showing a fourfold suppression of sensitivity to Raman laser power variations.

  5. Realization of high precision metrology and geodesy applications by measuring the Earth’s rotation rate with a relative error of 4.3% and long term stability of 93 ppm at an averaging time of 15,000 s using the multi-wavelength approach.

Sources

Related papers