Constitutive modelling of open-porous neo-Hookean solids

arXiv:2608.19793 · cond-mat.mtrl-sci, cond-mat.soft, math-ph, math.MP, physics.class-ph · Submitted 2026-08-20 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Condensed Matter. The day in condensed matter: materials, phases and the measurements under them.

Kai: I'm Kai.

Mira: And I'm Mira, here with Lev.

Kai: We're looking at the paper: "Constitutive modelling of open-porous neo-Hookean solids".

Title and authors: Kai: So we're looking at the paper titled "Constitutive modelling of open-porous neo-Hookean solids" by Ameya Rege. It’s about developing a porosity-dependent hyperelastic model for highly porous solids.

Mira: I see, so it’s focusing on linking the macroscopic mechanical behavior to how much air or void space is in the material. That sounds like a big step because open-porous materials are inherently very compressible and they change their stiffness as they get squished.

Lev: So what does this model actually build? Is it something that runs well on real hardware, or is it just a theory?

Kai: It's proposing this thermodynamically consistent compressible neo-Hookean constitutive model where the porosity is the main variable. This means we’re not just modeling the solid part; we’re modeling how the void space evolves during deformation.

Mira: And that evolution includes a bounded representation of pore collapse, which is important because you can't just have infinite collapse in reality without some kind of physical limit.

Lev: So what are the core assumptions here for the math to hold up? What parameters are they using to define this model?

Kai: They introduce a minimal set of parameters: the initial porosity, the intrinsic skeleton moduli, and a scalar parameter that controls how fast densification begins. Those are pretty fundamental inputs.

Mira: The real thing is how they handle the volumetric term; they normalize it by the current porosity to make sure there’s a smooth transition from being very porous to being dense without introducing artificial stiffening.

Lev: That normalization sounds tricky when you think about implementing it in a finite element solver or something that needs to be computationally efficient for real hardware testing.

The paper's summary: Kai: The paper says the strain energy density is formulated to couple the distortional elasticity of the solid skeleton with a volumetric response that’s governed by this deformation-induced porosity evolution. It’s explicitly linking pore geometry and volume fraction into an effective constitutive law to predict nonlinear mechanical behavior under finite deformation.

Mira: They reference some older work, like Guo, Caner, Peng and Moran from two thousand eight who developed a model linking large-strain macroscopic behavior to the underlying hyperelastic matrix and pore geometry under the assumption of cylindrical aligned pores.

Lev: So they’re building on previous models that assumed simple pore shapes. What’s the main new insight here that makes this approach different?

Kai: The key difference is treating porosity as the primary governing variable, which allows them to capture nonlinear densification and powerlaw scaling of stiffness with density, which is something previous models didn't handle well.

Mira: They also introduce a modified volumetric term in their strain energy function, which ensures a physically consistent transition from a porous state to a densified state without artificial stiffening.

Lev: So if we were running this on actual hardware, what does that mean for the computational cost? Is it still manageable compared to some of those neural network models they mention in the background reading?

Kai: The paper doesn't really focus on the computational cost directly, but it’s designed to be a compact and physically interpretable description. It aims to be computationally efficient enough for practical use.

Mira: And they validate this against experimental data for highly flexible, superelastic open-porous solids, which seems like a solid test bed for their claims.

The paper's improvements: Kai: One major improvement they highlight is the ability to define effective moduli in two ways: using Hashin-Shtrikman type effective-medium estimates or through Gibson-Ashby type power-law scaling relations.

Mira: That’s useful because it means you can choose how you want to calculate those moduli based on whether you want a bound that accounts for topology dependence or a scaling law that fits experimental observations.

Lev: If I’m building error correction hardware, I need to know how these effective moduli translate into actual strain and stress values. Does this formulation give us enough information there?

Kai: It gives us the framework to do that, but they note a potential issue: the bounded porosity law introduces a piecewise-smooth response at the point of complete pore collapse.

Mira: That piecewise smoothness isn't necessarily wrong from a thermodynamic consistency standpoint, but it can lead to a discontinuity in the material tangent, which is something we have to watch out for when designing stability analysis.

Lev: A discontinuity in the tangent means we might run into problems with numerical solvers trying to find a stable solution near that collapse point. How do they manage that?

Kai: The parameter beta plays a crucial role there; it controls both the onset and the rate of densification, which helps them reproduce a wide range of experimental responses. It’s essentially the dial for controlling how fast things change as you compress the material.

Conclusion: Mira: So to wrap up, this paper proposes a porosity-driven hyperelastic constitutive model based on a compressible neo-Hookean type strain energy density where evolving porosity is treated as the central internal variable governing the constitutive response.

Kai: By coupling the distortional response of the solid skeleton with a volumetric contribution linked to deformation-induced porosity evolution, this model captures key features like large compressibility, nonlinear densification, and progressive stiffening under compression.

Lev: From my side on real hardware implementation, I’d say capturing that nonlinearity means we have to be careful about how we map those strain energy density functions onto the actual state space of the device.

Mira: And they also showed good validation against the experimental data for superflexible and superelastic aerogels, which is pretty important because it shows applicability across different material types and loading conditions.

Kai: So this paper gives us a compact, physically interpretable, and computationally efficient constitutive description for open-porous materials. It’s a solid foundation to start looking at how we can predict the mechanical behavior of these complex structures.

Lev: Yeah, it provides a framework that bridges the gap between abstract theory and what you actually need to run on real experimental setups with good fidelity.

Mira: We'll keep an eye on how this model integrates into broader multiscale modeling efforts for these materials.

Kai: That’s what we’re heading into next then.

Ameya Rege

Department of Mechanics of Solids, Surfaces & Systems, University of Twente

cond-mat.mtrl-sci, cond-mat.soft, math-ph, math.MP, physics.class-ph

Submitted: 2026-08-20

Updated: 2026-08-20

DOI: 10.1016/j.euromechsol.2026.106469

License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/

Importance score: 86/100

The gist: Open-porous materials exhibit pronounced compressibility, nonlinear densification, and powerlaw scaling of stiffness with density.

Key concepts

Compressible Neo-Hookean Constitutive Model
This is a mathematical framework used to describe how an open-porous material deforms under stress. It combines standard elastic behavior with the ability to change volume, making it suitable for materials that can significantly compress or expand, like porous solids.
Porosity as Governing Variable
The model treats the amount of empty space (porosity) as the most important factor controlling how the material responds to deformation. Changes in porosity directly influence the material's stiffness and volume change, which is central to describing densification.
Strain Energy Density Function
This function mathematically defines the total energy stored within a material when it is deformed. The proposed function specifically links the solid skeleton's stretching (distortional) behavior with its volumetric change, ensuring physical consistency during deformation.
Densification and Stiffening
This refers to the process where an open-porous material becomes denser under compression. The model accounts for this by showing how the material's stiffness changes nonlinearly as it gets denser, which is a key feature observed in these materials.

Terminology

Summary

Open-porous materials exhibit pronounced compressibility, nonlinear densification, and powerlaw scaling of stiffness with density. p. 1 The proposed model introduces a thermodynamically consistent compressible neo-Hookean constitutive model for open-porous solids in which porosity serves as the primary governing variable. p. 1

Model Formulation

The strain energy density is formulated to couple distortional elasticity of the solid skeleton with a volumetric response governed by deformation-induced porosity evolution, including a bounded representation of pore collapse. The formulation introduces a minimal set of parameters, namely the initial porosity, intrinsic skeleton moduli, and a scalar parameter controlling the onset of densification. p. 1 A key feature of the model is a modified volumetric term in which the response is normalised by the current porosity, ensuring a physically consistent transition from a porous to a densified state without artificial stiffening. p. 1

Constitutive Foundations

The strain energy density function can be expressed in terms of the principal invariants as follows. To account for compressibility, a standard procedure is to decouple the strain energy density function into a deviatoric term and a volumetric one. p. 3 The proposed strain-energy density function is given by W = 1/2 μ(phi0) J(2/3) (1-phi c)(bar I C - 3) + 1/2 kappa(phi0) (J(1-phi c - 1)/(1 - phi c)) squared. p. 5

Modulus Scaling and Consistency

The model allows for two approaches to define the effective moduli: using Hashin-Shtrikman-type effective-medium estimates or Gibson-Ashby-type power-law scaling relations. The use of the bounded porosity law introduces a piecewise-smooth response at the point of complete pore collapse, which does not violate thermodynamic consistency but may lead to a discontinuity in the material tangent. p. 8 The parameter beta plays a crucial role in controlling the onset and rate of densification, allowing the model to reproduce a wide range of experimentally observed responses. p. 1 p. 1

Validation and Application

The model is validated against available experimental data for highly flexible, superelastic open-porous solids. The model captures the characteristic nonlinear stiffening and convex stress-stretch response associated with progressive pore collapse. p. 1 The model recovers classical linear elasticity in the small-strain regime, with effective moduli that can be specified either through Hashin-Shtrikman-type homogenisation bounds or through Gibson-Ashby-type power-law scaling. p. 1 Overall, the proposed model provides a compact, physically interpretable, and computationally efficient constitutive description for open-porous materials. p. 1

Conclusion

In this work, a porosity-driven hyperelastic constitutive model for open-porous materials has been proposed. The formulation is based on a compressible neo-Hookean-type strain-energy density in which the evolving porosity is treated as the central internal variable governing the constitutive response. p. 2 By coupling the distortional response of the solid skeleton with a volumetric contribution linked to deformation-induced porosity evolution, the model captures key features of open-porous materials, including large compressibility, nonlinear densification, and progressive stiffening under compression. p. 1 The parameter beta plays a crucial role in controlling the onset and rate of densification, allowing the model to reproduce a wide range of experimentally observed responses. The model also demonstrates good validation against the experimental data of superflexible and superelastic porous solids. p. 1

REFERENCES

arXiv:2608.19793v1 [cond-mat. p. 0mtrl-sci] 20 Aug 2026. p. 0 These results indicate that the proposed porosity-dependent extension of the Neo-Hookean model provides a versatile constitutive description for highly porous, superflexible, and superelastic solids across different material classes and loading conditions. p. 0

--- Page 13 ---

Model for porous neo-Hookean solids. Specifically, its applicability is assessed using data for different classes of superflexible and superelastic aerogels. p. 1

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Effective Stiffness Calculation for Small Strains: The improved AI system can calculate effective moduli from homogenisation bounds, such as the Hashin-Shtrikman estimates, or from Gibson-Ashby-type power-law scaling to capture topology-dependent behaviour in the small strain limit.

  2. Large Deformation Response Capture: The AI system can capture large deformation responses in both compression and tension by utilizing a modified volumetric term in which the response is normalised by the current porosity, ensuring a physically consistent transition from a porous to a densified state without artificial stiffening.

  3. Multiscale Modelling Integration: The improved system can facilitate multiscale modelling of highly compressible open-porous materials and integrate effective-medium consistency with experimentally observed scaling behaviour for more accurate predictions.

  4. Experimental Data Validation: The system can validate its predictions against experimental data for different classes of superflexible and superelastic aerogels, demonstrating applicability across diverse material types and loading conditions.

Sources

Related papers