Interface-Controlled Spin-Orbit Torques in Rare-Earth Synthetic Ferrimagnets Probed by Sagnac Magneto-Optics and Harmonic Hall Measurements
Listen
Radio episode about this paper
Transcript
Introduction to the show: ident: Condensed Matter. The day in condensed matter: materials, phases and the measurements under them.
Kai: We're looking at the paper: "Interface-Controlled Spin-Orbit Torques in Rare-Earth Synthetic Ferrimagnets Probed by Sagnac Magneto-Optics and Harmonic Hall Measurements".
Mira: Here's the gist of the paper. Interface-Controlled Spin-Orbit Torques in Rare-Earth Synthetic Ferrimagnets Probed by Sagnac Magneto-Optics and Harmonic Hall Measurements is a study investigating Co/Gd-based synthetic ferrimagnets using complementary magnetotransport and magneto-optical techniques to quantify current-induced magnetization tilting and extract the damping-like spin-orbit torque effective field The Sagnac measurements show good agreement with harmonic Hall analysis across different Co/Gd and Gd/Pt/Co heterostructures, providing a quantitative determination of the damping-like SOT effective field that does not rely on electrical transport signatures SOT Quantification Methods The research employs two distinct methods to quantify spin-orbit torques: harmonic Hall analysis and Sagnac magneto-optical interferometry.
Kai: Harmonic Hall measurements serve as a reference, utilizing second-harmonic Hall measurements on six-terminal Hall-bar devices to characterize the SOT efficiency The Sagnac MOKE technique is used to directly probe current-induced magnetization tilting by detecting Kerr rotations with sensitivities of a few tens of nanoradians.
Mira: Material Engineering and Interface Effects The study systematically varied the Gd thickness and multilayer stacking order to demonstrate that the damping-like torque is strongly influenced by spin transport and angular momentum conversion at rare-earth and heavy-metal interfaces Specific findings include: 1.
Kai: The observation of a finite torque in Gd/Pt/Co/Pt structures, where conventional Pt spin Hall contributions are expected to compensate, highlights the active role of the Gd layer in SOT generation.
Paper summary: Mira: So, we've covered the basic setup and what they claim about the direct optical measurement agreeing with transport methods. Now let's look at the specific details of how they approach this. The paper "Interface-Controlled Spin-Orbit Torques in Rare-Earth Synthetic Ferrimagnets Probed by Sagnac Magneto-Optics and Harmonic Hall Measurements" is focused on Co/Gd based synthetic ferrimagnets >
Kai: The paper is investigating these materials using both magnetotransport and magneto-optical techniques to quantify current-induced magnetization tilting and extract the damping-like spin-orbit torque effective field >
Lev: To set the scene for the methods, they use harmonic Hall measurements as a reference point first, which is a standard technique for characterizing SOT efficiency >
Mira: They also employ the Sagnac magneto-optical interferometry technique to directly probe current-induced magnetization tilting by detecting Kerr rotations with sensitivities of a few tens of nanoradians >
Kai: This gives them a way to get that damping-like spin-orbit effective field that they can quantify and which doesn't rely on those electrical transport signatures we talked about earlier >
Lev: The paper is also very focused on the interface effects because they vary the Gd thickness and stacking order to show how strongly the damping-like torque is influenced by spin transport and angular momentum conversion at rare-earth and heavy-metal interfaces >
Mira: Specifically, they observe a finite torque in Gd/Pt Co Pt structures where conventional platinum spin Hall contributions are expected to compensate >
Kai: That result highlights the active role of the Gd layer in SOT generation, which is something that is not always obvious when you only look at the heavy metal component >
Conclusion: Lev: So, wrapping up this discussion on "Interface-Controlled Spin-Orbit Torques in Rare-Earth Synthetic Ferrimagnets Probed by Sagnac Magneto-Optics and Harmonic Hall Measurements", what's the big picture takeaway for us? The authors are essentially proving that rare-earth based synthetic ferrimagnets offer a versatile platform >
Kai: They're showing that you can engineer spin transport, magnetic anisotropy, and current-induced dynamics through careful multilayer design >
Mira: The combination of direct optical torque quantification and interface-controlled magnetic engineering offers new opportunities for understanding and optimizing low power spintronic devices based on complex spin-orbit phenomena >
Lev: What this means practically is that we have a more direct way to measure the damping-like SOT efficiency without those transport artifacts, which is crucial for designing next generation low power devices >
Institut Jean Lamour, University of Lorraine · Center for Quantum Phenomena, New York University
cond-mat.mtrl-sci, cond-mat.mes-hall
Submitted: 2026-08-18
Updated: 2026-11-10
Comments: 14 pages, 11 figures including 2 pages and 3 figures of Appendix
License: http://creativecommons.org/licenses/by/4.0/
Importance score: 84/100
The gist: Interface-Controlled Spin-Orbit Torques in Rare-Earth Synthetic Ferrimagnets Probed by Sagnac Magneto-Optics and Harmonic Hall Measurements is a study investigating Co/Gd-based synthetic ferrimagnets…
Key concepts
- Spin-Orbit Torque (SOT)
- SOT is a mechanism where an electric current flowing through a material generates a torque on the magnetization of an adjacent magnetic layer. This effect is crucial for developing low-power spintronic devices like MRAM, allowing magnetization to be switched using electricity instead of large external magnetic fields.
- Harmonic Hall Analysis
- This method uses second-harmonic measurements on Hall bars to characterize SOT efficiency. It involves measuring the voltage response at twice the driving frequency and analyzing the resulting resistances to extract effective fields like the damping-like field, which quantifies how efficiently spin current is converted into torque.
- Sagnac Magneto-Optics
- This technique directly probes magnetization tilting by detecting Kerr rotations. It measures how a magnetic field changes the polarization of light passing through a material. This provides a direct optical measurement of the current-induced magnetization dynamics, which is free from many artifacts found in electrical transport measurements.
Terminology
Summary
Interface-Controlled Spin-Orbit Torques in Rare-Earth Synthetic Ferrimagnets Probed by Sagnac Magneto-Optics and Harmonic Hall Measurements is a study investigating Co/Gd-based synthetic ferrimagnets using complementary magnetotransport and magneto-optical techniques to quantify current-induced magnetization tilting and extract the damping-like spin-orbit torque effective field The Sagnac measurements show good agreement with harmonic Hall analysis across different Co/Gd and Gd/Pt/Co heterostructures, providing a quantitative determination of the damping-like SOT effective field that does not rely on electrical transport signatures
SOT Quantification Methods
The research employs two distinct methods to quantify spin-orbit torques: harmonic Hall analysis and Sagnac magneto-optical interferometry. Harmonic Hall measurements serve as a reference, utilizing second-harmonic Hall measurements on six-terminal Hall-bar devices to characterize the SOT efficiency The Sagnac MOKE technique is used to directly probe current-induced magnetization tilting by detecting Kerr rotations with sensitivities of a few tens of nanoradians. p. 1 Owing to its exceptional sensitivity, the interferometer
directly probes current-induced magnetization tilting by
detecting Kerr rotations with sensitivities of a few tens of
nanoradians. We compare the extracted SOT efficiencies
with those obtained from conventional second-harmonic
Hall measurements, finding good agreement while providing a direct optical determination of the torque.Where the paper says it
Material Engineering and Interface Effects
The study systematically varied the Gd thickness and multilayer stacking order to demonstrate that the damping-like torque is strongly influenced by spin transport and angular momentum conversion at rare-earth and heavy-metal interfaces Specific findings include:
-
The observation of a finite torque in Gd/Pt/Co/Pt structures, where conventional Pt spin Hall contributions are expected to compensate, highlights the active role of the Gd layer in SOT generation. p. 0
Where the paper says it
By varying the Gd thickness and multilayer stacking order, we demonstrate that the damping-like torque is strongly influenced by spin transport and angular momentum conversion at rare-earth and heavy-metal interfaces. The observation of a finite torque in Gd/Pt/Co/Pt structures, where conventional Pt spin Hall contributions are expected to compensate, highlights the active role of the Gd layer in SOT generation.
-
Interface engineering enables perpendicular magnetic anisotropy in Gd/Pt/Co/Al heterostructures with a 2-nm-thick Co layer, allowing current-induced SOT switching at current densities of 8-10 MA/cm2. p. 0
Where the paper says it
The observation of a finite torque in Gd/Pt/Co/Pt structures, where conventional Pt spin Hall contributions are expected to compensate, highlights the active role of the Gd layer in SOT generation. Furthermore, interface engineering enables perpendicular magnetic anisotropy in Gd/Pt/Co/Al heterostructures with a 2-nm-thick Co layer, allowing current-induced SOT switching at current densities of 8-10 MA/cm2 .
-
The largest torques are observed in the Gd(2)/Co(2)/Pt(2) and Co(2)/Gd(1)/Pt(2) heterostructures, whereas inserting a Pt spacer between Gd and Co substantially reduces the torque efficiency, highlighting the critical role of spin-current transmission across the interfaces. p. 5
Where the paper says it
The magnitude of the effective field depends strongly on the layer sequence and interface configuration. In particular, the largest torques are observed in the Gd(2)/Co(2)/Pt(2) and Co(2)/Gd(1)/Pt(2) heterostructures, whereas inserting a Pt spacer between Gd and Co substantially reduces the torque efficiency, highlighting the critical role of spin-current transmission across the interfaces.
Comparison of Measurement Techniques
The comparison between transport-derived and magneto-optical measurements confirms consistency in extracted damping-like spin-orbit torques across all investigated heterostructures The Sagnac technique is noted for its ability to provide a direct optical probe that is inherently free from many of the transport-related artifacts associated with nonlinear Hall and thermoelectric effects.
Switching Performance and Conclusion
The work demonstrates current-induced spin-orbit-torque switching in the Gd/Pt/Co/Al heterostructure, achieving deterministic switching with critical current densities of approximately 8–10 MA/cm2 under in-plane bias fields of µ0H∥ ≥ 50 mT. Overall, these findings demonstrate that rare-earthbased synthetic ferrimagnets provide a versatile platform for engineering spin transport, magnetic anisotropy, and current-induced dynamics through multilayer design. p. 8 This result highlights the
importance of optimizing not only the torque magnitude
but also the magnetic energy landscape for efficient SOTdriven devices. Overall, these findings demonstrate that rare-earthbased synthetic ferrimagnets provide a versatile platform for engineering spin transport, magnetic anisotropy,
and current-induced dynamics through multilayer design. Overall, these findings demonstrate that rare-earthbased synthetic ferrimagnets provide a versatile platform for engineering spin transport, magnetic anisotropy,
and current-induced dynamics through multilayer design. The combination of direct optical torque quantification and interface-controlled magnetic engineering offers new opportunities for understanding and optimizing
low-power spintronic devices based on complex spin-orbit
phenomena.Where the paper says it
Where the paper says it
TABLE I
The table summarizes the comparison of damping-like spin–orbit torque parameters obtained from harmonic Hall and Sagnac magnetooptical measurements for the investigated Co/Gd/Pt-based heterostructures, along with Rsheet, Ms × tFM, µ0Hk, BDL/I Hall BDL/I Sagnac ξ DL E (omega) µemu/mm2 (T) (mT/mA) (mT/mA) 10 5
//Co(2)/Gd(1)/Pt(2) 314.8 1.47 0.91 −0.45 ± 0.01 −-0.410 ± 0.035 −-1.29± 0.03
//Gd(1)/Co(2)/Pt(2) 269.1 1.72 0.39 −- - - - - - - - - - - -
//Co(2)/Gd(2)/Pt(2) 451.9 1.38 0.99 −0.36± 0.02 −0.177 ± 0.039 − - - -
//Gd(2)/Co(2)/Pt(2) 269.1 147 (omegam)−1 - - - - -
//Gd(2)/Pt/Co/Pt (5) 112.5 0.104 ± 0.001 − - - - -
APPENDIX A
The analysis presented in the main text assumes that Meff ≫ H∥, so that Eq. 12 reduces to µ0HDL ≃ θK/χ This approximation is well justified for most of the samples investigated here because their effective magnetizations are much larger than the applied in-plane field (µ0H∥ = 20 mT) However, for samples with a relatively small Meff, the full expression, Eq. p. 4 For most
of the samples studied here, Meff ≫ H∥, so that the
prefactor is close to unity and µ0HDL ≃ θK/χ, which
is therefore directly proportional to the applied current. For samples with smaller effective magnetization, the approximation Meff ≫ H∥ is no longer valid. For a uniformly magnetized thin film strip
with in-plane anisotropy, and assuming that the magnetization is aligned with the applied in-plane magnetic field
(φM = φH), minimization of the magnetic free energy
yields, in the small-angle limit, an equilibrium out-ofplane magnetization component of
mz =
HDL cos φH
Meff + H∥
, (10)
where HDL is the damping-like effective field, Meff is the
effective magnetization, and H∥ is the applied in-plane
magnetic field. To quantify the damping-like effective field, we first
calibrate the Kerr response by measuring the polar Kerr
effect θK as a function of the applied perpendicular magnetic field H⊥ (Fig. A low-frequency alternating current (433 Hz) was injected along the current
channel while the longitudinal and transverse first- and
second-harmonic voltages were simultaneously measured
using lock-in detection. Several experimental protocols
have been proposed, including magnetic-field sweeps, inplane and out-of-plane angular measurements, and field
sweeps at a fixed tilt angle [31, 32, 37–39]. Experimentally, χ is obtained
from the slope of the Kerr rotation measured as a function of out-of-plane magnetic field in the linear regime
around zero field. Combining the expressions for the current-induced
magnetization tilt and the magneto-optic susceptibility
yields the relationship
θK
χ
=
µ0MeffHDL
Meff + H∥
, (12)
which relates the measured Kerr rotation directly to the
damping-like effective field for φH = 0, the applied current aligned with the sample magnetization. Combining the expressions for the current-induced
magnetization tilt and the magneto-optic susceptibility
yields the relationship
θK
χ
=
µ0MeffHDL
Meff + H∥
, (12)
which relates the measured Kerr rotation directly to the
damping-like effective field for φH = 0, the applied current aligned with the sample magnetization. For most
of the samples studied here, Meff ≫ H∥, so that the
prefactor is close to unity and µ0HDL ≃ θK/χ, which
is therefore directly proportional to the applied current. For most
of the samples studied here, Meff ≫ H∥, so that the
prefactor is close to unity and µ0HDL ≃ θK/χ, which
is therefore directly proportional to the applied current. For samples with smaller effective magnetization, the approximation Meff ≫ H∥ is no longer valid.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
--- Page 1 ---
Akilan K,1 Koral Aykin,2 Jose-Luis Ampuero,1 Laurent Badie,1 Stephane Mangin,1 S´ebastien Petit-Watelot,1 Michel Hehn, Andrew D. Kent,2,∗ and J. p. 0 Interface-Controlled Spin-Orbit Torques in Rare-Earth Synthetic Ferrimagnets
Probed by Sagnac Magneto-Optics and Harmonic Hall Measurements
Akilan K,1 Koral Aykin,2 Jose-Luis Ampuero,1 Laurent Badie,1 Stephane Mangin,1 S´ebastien
Petit-Watelot,1 Michel Hehn,1 Andrew D. Kent,2, ∗ and J.Where the paper says it
Spin-orbit torque (SOT) provides an efficient route for manipulating magnetization in spintronic devices, and its accurate quantification is essential Here, we investigate Co/Gd-based synthetic ferrimagnets using complementary magnetotransport and magneto-optical techniques We use a Sagnac magneto-optical interferometry method to directly quantify current-induced magnetization tilting and extract the damping-like SOT effective field The Sagnac measurements show good agreement with harmonic Hall analysis across different Co/Gd and Gd/Pt/Co heterostructures, providing a quantitative determination of the damping-like SOT effective field that does not rely on electrical transport signatures By varying the Gd thickness and multilayer stacking order, we demonstrate that the damping-like torque is strongly influenced by spin transport and angular momentum conversion at rare-earth and heavy-metal interfaces The observation of a finite torque in Gd/Pt/Co/Pt structures, where conventional Pt spin Hall contributions are expected to compensate, highlights the active role of the Gd layer in SOT generation Furthermore, interface engineering enables perpendicular magnetic anisotropy in Gd/Pt/Co/Al heterostructures with a 2-nm-thick Co layer, allowing current-induced SOT switching at current densities of 8-10 MA/cm2 These results establish rare-earth-based synthetic ferrimagnets as a versatile platform for engineering spin-orbit phenomena and optimizing low-power spintronic devices
I. INTRODUCTION
With the rapid growth of the Internet of Things and artificial intelligence, the energy demand associated with data processing and storage is increasing exponentially and is predicted to account for up to 50% of global electricity consumption by 2030 [1, 2] Spintronics offers promising solutions through non-volatile magnetic random-access memory (MRAM), including spin-transfer torque (STT)-MRAM [3–6] and spin-orbit torque (SOT)-MRAM [7, 8] Advancing SOT-MRAM technology requires reducing the critical current needed to switch the magnetization while maintaining a low device resistance, thereby preserving the advantage of reduced power consumption Among the various classes of spintronic materials, rare-earth-transition-metal (RE-TM) ferrimagnetic alloys have attracted considerable attention because they enable both electrically driven SOT phenomena [9, 10] and optically induced magnetization dynamics, including current-induced self-torques [11, 12], ultrafast domainwall motion [13], and single-pulse all-optical switching (AOS) [14, 15] Metallic ferrimagnetic alloys such as GdFeCo, GdCo, and CoTb consist of two antiferromagnetically coupled magnetic sublattices [9, 11, 12, 16–18] As a result, they combine favorable characteristics of ferromagnets and antiferromagnets, while their net magnetization can be continuously tuned through composition, layer thickness, or temperature [19–21] Compared with amorphous RE–TM alloys, synthetic ferrimagnets (SFiMs) based on RE/TM multilayers provide greater flexibility for wafer-scale fabrication and interface engineering Their layered structure enables independent control of the constituent layer thicknesses and interfaces, allowing the magnetic properties to be tailored over a broad range In combination with heavy metals exhibiting strong spin-orbit coupling, such as Pt, trilayers based on Pt/Co/Gd enable independent tuning of the perpendicular magnetic anisotropy (PMA) and the interfacial Dzyaloshinskii–Moriya interaction (DMI), thereby optimizing current-driven spintronic phenomena More recently, Co/Gd multilayers have demonstrated robust PMA, wide-range single-shot AOS, and suppression of spin dephasing [24–26]
II. SOT QUANTIFICATION BY HARMONIC HALL AND SAGNAC MOKE
A. SOT characterization by Harmonic Hall analysis
The second-harmonic Hall technique is one of the most widely used methods for quantifying spin-orbit torque (SOT) efficiencies [30–32, 37] Before introducing the magneto-optical Sagnac approach, we first characterize the SOT using the conventional second-harmonic Hall method, which serves as a reference throughout this work Second-harmonic Hall measurements were performed on six-terminal Hall-bar devices A low-frequency alternating current (433 Hz) was injected along the current channel while the longitudinal and transverse first- and second-harmonic voltages were simultaneously measured using lock-in detection In this work, we employ the in-plane angular dependence Because this protocol has recently been shown to exhibit nonlinear contributions arising from current-induced magnon generation and annihilation at low magnetic fields [40, 41] We simultaneously measure both the transverse (Vxy) and longitudinal (Vxx) voltages in a double Hall-bar geometry under a constant in-plane magnetic field while rotating its direction by an angle φH (Fig. 2a) The corresponding first-harmonic, R1ω, and secondharmonic, R2ω resistances are obtained by dividing the measured rms voltage, Vrms, by the rms current, Irms and are given by:
R1ωxy = RPHE sin(2φ), (1)
R1ωxx = R∥xx cos2 φ + R⊥xx sin2 φ, (2)
R2ωxy = Axy cos φ + Bxy cos3 φ, (3)
R2ωxx = Axx sin φ + Bxx sin3 φ, (4)
where RPHE is the planar Hall resistance and R∥xx and R⊥xx are longitudinal resistances when current is parallel and perpendicular to the magnetic field respectively Neglecting the nonlinear magnon contribution, the coefficients Axy and Bxy can be used to extract the damping-like (DL) and field-like (FL) effective fields, BDL and BFL, together with the corresponding SOT efficiencies, ξ DL and ξ FL Specifically, R2ωDL+∇T = −2(Axy + Bxy/2) and R2ωFL = Bxy/2 and R2ωFL = Bxy/2 By repeating the angular measurements under different applied magnetic fields, BDL and BFL are obtained from the linear relationships expressed in the following equations:
R2ωDL,xy = RAHEBDL/µ0Heff + Rthermal, (5)
R2ωFL,xy = RPHEBFL/2µ0H.
Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.
Improvements for AI systems
-
Integration of Sagnac MOKE data into AI models for direct damping-like spin-orbit torque field extraction allows AI systems to bypass transport artifacts by directly probing
current-induced magnetization tilting.
This enables a more robust and independent quantification of the damping-like effective field (HDL) without relying on harmonic Hall analysis corrections. -
Development of an AI system capable of performing full non-linear fitting using the general expression for the Kerr rotation, Eq. 12, when Meff is comparable to H parallel, enables accurate extraction of both HDL and Meff from Sagnac measurements for samples like Gd(2)/Pt(2)/Co(2)/Pt(2).
-
Creation of an AI tool that correlates structural parameters (Gd thickness and stacking order) with the extracted damping-like torque efficiency (xi DL E), enabling predictive material design for optimizing spin transport in Co/Gd systems.
Abstract
Spin-orbit torque (SOT) provides an efficient route for manipulating magnetization in spintronic devices, and its accurate quantification is essential. Here, we investigate Co/Gd-based synthetic ferrimagnets using complementary magnetotransport and magneto-optical techniques. We use a Sagnac magneto-optical interferometry method to directly quantify current-induced magnetization tilting and extract the damping-like SOT effective field. The Sagnac measurements show good agreement with harmonic Hall analysis across different Co/Gd and Gd/Pt/Co heterostructures, providing a quantitative determination of the damping-like SOT effective field that does not rely on electrical transport signatures. By varying the Gd thickness and multilayer stacking order, we demonstrate that the damping-like torque is strongly influenced by spin transport and angular momentum conversion at rare-earth and heavy-metal interfaces. The observation of a finite torque in Gd/Pt/Co/Pt structures, where conventional Pt spin Hall contributions are expected to compensate, highlights the active role of the Gd layer in SOT generation. Furthermore, interface engineering enables perpendicular magnetic anisotropy in Gd/Pt/Co/Al heterostructures with a 2-nm-thick Co layer, allowing current-induced SOT switching at current densities of 8-10 MA/cm squared. These results establish rare-earth-based synthetic ferrimagnets as a versatile platform for engineering spin-orbit phenomena and optimizing low-power spintronic devices.
Related papers
- Structural contribution to light-induced gap suppression in Ta 2 NiSe 5
- Anatomy of fast current-induced skyrmion motion in synthetic antiferromagnets
- Magnetic control of an exciton-polariton condensate in a van der Waals magnet
- High-pressure elastic properties of GeO2 polymorphs up to 120 GPa
- Decoupling Strain-Rate Sensitivity and Deformation Length Scale Effects in Neutron-Irradiated Tungsten: A Coupled Nano-Indentation, HR-EBSD and Crystal Plasticity Study
- Magnetism modulation in Co3Sn2S2 by current-assisted domain wall motion