Electron transport in amorphous materials: from localization to predictive transport modeling
Listen
Radio episode about this paper
Transcript
Introduction to the show: ident: Condensed Matter. The day in condensed matter: materials, phases and the measurements under them.
Kai: We're looking at the paper: "Electron transport in amorphous materials".
Title and authors: Mira: So, we're starting with the title and authors of this paper, "Electron transport in amorphous materials: from localization to predictive transport modeling." They’re talking about moving past just describing localization to actually developing a way to predict how things will move.
Kai: Exactly. And the authors are Yeonghun Lee and others from Incheon National University, which is where we get that connection between theory and experimental setups, right?
Lev: I wonder if that structural focus on amorphous materials—like silicon or oxide semiconductors—is what makes this paper different from just looking at conventional band theory.
Mira: It is different because they are focusing on how the disorder itself reshapes the electronic structure, not just how it causes scattering in a standard way. They are looking at things like band-tail states and mobility edges that aren't as clear in perfect crystals.
Kai: That’s right. They are trying to capture that reshaping effect, which is crucial because those features directly influence how carriers actually move through the material.
Lev: If we can predict those transport properties accurately, it tells us a lot about the reliability of materials we design for things like transistors or solar cells.
The paper's summary: Kai: So, looking at the summary of "Electron transport in amorphous materials: from localization to predictive transport modeling," they cover how structural disorder impacts wavefunctions and then how that governs carrier movement in amorphous semiconductors.
Mira: It basically sets up the whole problem. They start with Anderson’s one thousand nine hundred fifty-eight work showing that strong disorder can cause wavefunctions to localize because of quantum interference, which is a big deal for understanding transport <ref:2608.17814#pg3>.
Lev: So, they establish that extended states lead to diffusive transport, but localized states lead to hopping conduction; it’s a fundamental split in how charge moves.
Kai: Right. But then they move into the specific materials like amorphous silicon and amorphous oxide semiconductors, showing how their unique structure creates features like band-tail states that matter near the edges of the bands.
Mira: They make a clear point that you can’t just broaden a crystal's electronic structure; the disorder fundamentally changes it, and that leads to these new states they call band-tail states.
Lev: That means our standard pictures of conductivity based on perfect crystals are incomplete when we look at these real-world amorphous systems.
The paper's improvements: Kai: The paper then discusses the different computational approaches they’re looking at, moving from older analytical descriptions to more modern atomistic simulations that use first principles calculations.
Mira: They highlight the Kubo–Greenwood formula as a key tool because it lets you calculate conductivity based on quantum transitions without needing crystal momentum to be a good number.
Lev: That’s important because if you want to run this on real hardware, the conventional Boltzmann transport theory falls apart quickly because we can't define that crystal momentum anymore when there’s no long-range order.
Kai: And they point out that real-space Kubo–Greenwood simulations are a direct way to evaluate transport without relying on crystal momentum, which is a big step forward for modeling amorphous systems.
Mira: They also address how conventional theories struggle because of the lack of translational symmetry, so they introduce linear-response theory using Green’s functions to bring in those disorder effects through self-energy corrections.
Conclusion: Kai: So to wrap up, "Electron transport in amorphous materials: from localization to predictive transport modeling" shows how structural disorder dictates the spatial character of wavefunctions and governs carrier transport through things like localization versus hopping conduction.
Mira: The paper points out that the electronic structure isn't just a broadened crystal structure, but something reshaped by the atomic network, creating those important band-tail states they discussed earlier.
Lev: For what we actually need to run this on real hardware, the paper flags that incorporating dynamical electron–phonon interactions beyond simple static approximations is still a big challenge for getting a truly accurate picture of thermal effects.
Kai: And the authors admit that achieving both realistic structural modeling and reliable electronic structures in large amorphous systems is still a major hurdle they’re facing.
Mira: They leave us with the idea that we need better ways to connect structural disorder, spectral broadening, localization, and transport into a more quantitative understanding of measurable properties.
Lev: From my side, it means that for our error correction research to be useful here, we really need those methods linking the localization length derived from things like the inverse participation ratio to actual mobility calculations for materials like amorphous oxide semiconductors.
Kai: That sounds like a very concrete next step, moving from just theory to building predictive tools that can actually work on materials.
Mira: Exactly. We’ll keep an eye on how these structural modeling improvements evolve because getting the electronic structure right is the first big hurdle for anything practical in this area.
Department of Electronics Engineering, Incheon National University · Department of Intelligent Semiconductor Engineering, Incheon National University Research Institute for Engineering and Technology
cond-mat.mtrl-sci
Submitted: 2026-08-18
Updated: 2026-08-26
Journal ref: J. Kor. Phys. Soc. 89, 1064 (2026)
DOI: 10.1007/s40042-026-01710-9
License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/
Importance score: 83/100
The gist: Amorphous materials are disordered solids without long-range structural order, making them useful systems for studying electron transport beyond the crystalline picture The review discusses how…
Key concepts
- Localization and Transport Regimes
- Structural disorder causes electron wavefunctions to become localized rather than extended. This dictates the type of conduction: extended states allow for diffusive movement, while localized states lead to hopping-type conduction, fundamentally changing how charge moves in amorphous solids.
- Band-tail States
- In amorphous semiconductors, the lack of long-range order creates specific electronic features called band-tail states. These are energy levels that exist within the band gap and influence transport near the edges of the allowed energy regions, unlike simple crystalline broadening.
- Kubo–Greenwood (KG) Formula
- This quantum formula is used to calculate electrical conductivity by considering transitions between electronic states. Its advantage is that it does not require crystal momentum, making it a powerful tool for studying transport in systems lacking long-range periodic symmetry.
- Electron–Phonon Interactions
- This refers to the coupling between electrons and the vibrations (phonons) of the material lattice. A major challenge in modeling amorphous materials is accurately incorporating these dynamical interactions, as thermal motion significantly modifies both the energy spectrum and electron velocity.
Terminology
Summary
Amorphous materials are disordered solids without long-range structural order, making them useful systems for studying electron transport beyond the crystalline picture The review discusses how structural disorder changes the spatial character of electron wavefunctions and how these changes govern carrier transport in amorphous materials, especially amorphous semiconductors. p. 0
Localization and Transport Regimes
The relationship between structural disorder and electron transport has long been a major problem in condensed matter physics Anderson’s work in 1958 showed that sufficiently strong disorder can localize wavefunctions through quantum interference. Transport in disordered systems is governed not only by scattering rates but also by the degree of wavefunction localization. p. 2 Extended states can support diffusive transport, whereas localized states give rise to hopping-type conduction. p. 2
Electronic Structure Features
Amorphous semiconductors lack long-range periodic order while often retaining local bonding environments that resemble those of the corresponding crystalline phases This structural character produces band-tail states and mobility edges that influence transport near the band edges. The electronic structure of amorphous semiconductors should not be viewed simply as a broadened version of the crystalline electronic structure; it is reshaped by the underlying disordered atomic network One of the prominent consequences of this disorder is the formation of band-tail states [8,10,12,13]. p. 9
Transport Formalisms
Theoretical descriptions have evolved from analytical descriptions to atomistic simulations based on first-principles electronic-structure calculations. The Kubo–Greenwood (KG) formula has played an important role because it expresses the electrical conductivity in terms of quantum-mechanical transitions between electronic states without requiring crystal momentum as a good quantum number. p. 3 Real-space KG simulations provide a direct route for evaluating transport without relying on crystal momentum. p. 3
Computational Approaches and Challenges
Conventional transport theories like semiclassical Boltzmann transport theory are limited because the absence of long-range translational symmetry makes crystal momentum difficult to define. Linear-response theory, using the Kubo formula expressed with Green’s functions, allows for the incorporation of disorder and interaction effects through self-energy. p. 3 Real-space KG simulations require replacing discrete energy-conservation delta functions by broadened spectral functions to obtain a well-defined dc conductivity. p. 1
Future Directions
A key difficulty remains the simultaneous presence of structural disorder and electron–phonon interactions. Developing methods capable of incorporating dynamical electron–phonon interactions beyond this approximation, as well as vertex corrections [33–35], remains a challenge for future research. p. 0 Achieving both realistic structural modeling and reliable electronic structures in large-scale amorphous systems is also a major hurdle. p. 3
Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.
Improvements for AI systems
-
Atomistic transport simulations can be improved by developing methods capable of incorporating dynamical electron-phonon interactions beyond quasi-static treatments, as mentioned in Section 5 Summary and outlook. This will allow for a more physically accurate description of how thermal motion modifies both the energy spectrum and the velocity matrix elements.
-
Predictive modeling tools can be enhanced by linking structural disorder, spectral broadening, localization, and transport through a more quantitative understanding of their relationships. This involves developing methods that explicitly connect these factors to measurable transport properties.
-
Machine learning interatomic potentials can be leveraged for large-scale structural modeling to generate larger amorphous structures and larger structural ensembles beyond conventional first-principles molecular dynamics limits. This enables the simulation of complex disorder necessary for accurate electronic structure predictions in large systems.
-
Electronic structure methods can be improved by employing hybrid functionals, the GW approximation, and emerging machine learning based methods to better predict band gaps, defect levels, and localized states. This will improve the accuracy of electronic structure descriptions relevant to amorphous-semiconductor transport.
-
The AI system can perform quantitative mobility calculations for amorphous oxide semiconductors by combining first-principles calculations of disordered structures with mobility-localization relations established from model NEGF calculations using the inverse participation ratio to estimate localization length.
Sources
Related papers
- Structural contribution to light-induced gap suppression in Ta 2 NiSe 5
- Anatomy of fast current-induced skyrmion motion in synthetic antiferromagnets
- Magnetic control of an exciton-polariton condensate in a van der Waals magnet
- High-pressure elastic properties of GeO2 polymorphs up to 120 GPa
- Decoupling Strain-Rate Sensitivity and Deformation Length Scale Effects in Neutron-Irradiated Tungsten: A Coupled Nano-Indentation, HR-EBSD and Crystal Plasticity Study
- Magnetism modulation in Co3Sn2S2 by current-assisted domain wall motion