Structure-Property Correlation of Cr/Cu-MnFeCoNi High-Entropy Alloys for Alkaline Water Electrolysis

arXiv:2607.26888 · cond-mat.mtrl-sci · Submitted 2026-07-29 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Condensed Matter. The day in condensed matter: materials, phases and the measurements under them.

Kai: We're looking at the paper: "Structure-Property Correlation of Cr/Cu-MnFeCoNi High-Entropy Alloys for Alkaline Water Electrolysis".

Mira: Here's the gist of the paper. High-entropy alloys (HEAs) are investigated as promising electrocatalysts for energy conversion because their compositional complexity and tunable surface chemistry allow for synergistic effects that can substantially alter electrochemical kinetics.

Kai: Under the same experimental condition, HEA-Cu outperforms HEA-Cr towards both HER and OER.

Mira: Substituting Cr with Cu significantly enhances the bifunctional activity, where HEA-Cu achieved a lower overpotential (538 mV) and Tafel slope (165 mVdec 1) when compared with HEA-Cr.

Kai: Computational analysis corroborates these findings, showing that Cu substitution modulates the electronic structure to provide favorable binding energies for reaction intermediates (H∗, O∗, OH∗, and OOH∗).

Paper summary: Kai: So, we’re looking at this paper now, "Structure-Property Correlation of Cr/Cu-MnFeCoNi High-Entropy Alloys for Alkaline Water Electrolysis". It seems to be investigating how changing one metal in a high entropy alloy affects its performance for splitting water.

Mira: Right, the main thesis here is that high entropy alloys have this unique compositional complexity and surface chemistry that lets them create synergistic effects which can really change how electrochemical reactions go.

Lev: I mean, the paper claims that when you substitute Chromium with Copper in this specific alloy system, the HEA-Cu actually performs better than the HEA-Cr for both hydrogen evolution reaction and oxygen evolution reaction.

Kai: So what does that mean practically? The paper says HEA-Cu achieves a lower overpotential of five hundred thirty-eight millivolts and a Tafel slope of one hundred sixty-five millivolt per decade compared to HEA-Cr under the same experimental conditions <ref:2607.26888#pg2>.

Mira: That difference in the overpotential is significant, especially when we look at the Tafel slope, which speaks to how fast the reaction proceeds on that surface.

Lev: And they back up this claim with computational analysis showing that Cu substitution shifts the electronic structure to give better binding energies for all those reaction intermediates like H star and O star and OH star and OOH star.

Kai: That modulation of the electronic structure is key, because it directly impacts how easily the reactants stick to or let go from the surface during water splitting.

Mira: It really shows that understanding this interplay between structure and properties, what they call Sabatier relations, is crucial for designing high-performance electrocatalysts.

Lev: And unlike the hydrogen evolution reaction where HEA-Cu seems stable, they found that after oxygen evolution reaction tests, you get this migration of copper forming a copper rich outer layer shell with a multimetallic core.

Kai: That migration is something we need to watch closely for real hardware; it suggests that while the initial performance looks good, the surface structure can change under operational conditions.

Mira: It highlights how sensitive these systems are to the specific reaction environment, because in this case, oxygen rich environments trigger this structural change.

Lev: So for someone building a real device, they need to account for that layer formation when predicting long-term stability and activity retention.

Paper summary: Kai: And the paper also looked at the structural characterization of these alloys, confirming they form a single phase face centered cubic solid solution in both bulk and powder samples.

Mira: That’s interesting because even though they didn't change the crystal structure when substituting Chromium with Copper, they noted a modest adjustment of the lattice parameters due to that lattice distortion effect.

Lev: And on the surface itself, X ray photoelectron spectroscopy showed that copper mostly exists in the Cu one oxidation state and iron and cobalt show mixed valence characteristics suggesting multiple oxidation states on the nanoparticle surface.

Kai: So it's not just a simple substitution; it's a complex electronic environment happening at the atomic scale on the particle surface.

Mira: Exactly, and this is what drives those favorable binding energies they found for the reaction intermediates during water splitting processes.

Lev: It’s worth asking how much of that observed performance gain really translates when you try to run these things on actual electrochemical cells with all their parasitic effects.

Kai: That’s a good point, Lev; we need to see if those calculated kinetic improvements hold up when you introduce real current densities and the associated mass transport limitations.

Mira: The paper does mention that the synergy between the five metals in this high entropy alloy enhances the catalytic hydrogen evolution reaction activity compared to using just single copper metal catalyst.

Lev: And when we look at practical applications, they tested HEA-Cu with Vulcan carbon and found it performed better than HEA-Cr for both HER and OER performance.

Kai: Adding that carbon material is a standard practice, but seeing it improve performance across both reactions suggests the substrate plays a significant role in the overall system efficiency.

Mira: And when comparing to other catalysts, they noted that while platinum on carbon outperformed the HEA catalysts for hydrogen evolution, for oxygen evolution reaction, HEA-Cu showed activity close to ruthenium dioxide.

Lev: That's a strong comparative statement because it suggests potential for replacing noble metal catalysts in OER applications with these metal free high entropy alloys.

Kai: The authors also included accelerated degradation tests which showed that after three thousand cycles, they actually observed an increase in the catalytic activity of the HEA-Cu.

Paper summary: Mira: That’s a positive finding because it suggests that the system can recover some performance even after repeated electrochemical cycling, though we saw the migration issue under oxygen evolution conditions.

Lev: So for real hardware development, you have to be careful about which reaction condition you are testing, because HER and OER show different degradation paths here.

Kai: Looking at the structure-property correlation aspect again, it seems like the whole point is mapping out how specific substitutions lead to predictable changes in surface kinetics.

Mira: It gives us a blueprint for compositional tuning, showing that replacing one constituent element can significantly shift the d band characteristics and modify electrochemical behavior through m.

Lev: If you’re building error correction hardware, this paper tells you that the underlying material chemistry has these inherent tunable parameters that we need to model accurately for reliable operation.

Kai: So overall, this paper on "Structure-Property Correlation of Cr/Cu-MnFeCoNi High-Entropy Alloys for Alkaline Water Electrolysis" points toward using HEAs as a strategy to design low cost noble metal free sustainable catalysts for water splitting.

Mira: It suggests that controlling the composition of these high entropy alloys is a way to achieve favorable adsorption and desorption kinetics for the reaction intermediates, which is crucial according to Sabatier relations.

Lev: It’s about using this knowledge to guide synthesis towards materials that perform well enough when we move them from the simulation phase into actual electrochemical cells.

Kai: It shows that even with these structural distortions of ten to fifteen percent caused by copper substitution, we can still get really good catalytic activity.

Mira: The main implication for the wider field is confirming that single element substitution in HEAs can be a viable strategy for creating high performance, cost effective catalysts for water electrolysis.

Lev: And the limitation they mention is that they are looking at alkaline water electrolysis specifically, so we need to consider how this material performs in acidic conditions too.

Kai: Yeah, that’s a fair caveat; the environment dictates so much of the catalytic behavior here.

Mira: It seems like this work gives us a really solid starting point for exploring different combinations of transition metals and how they cooperate at the interface to optimize performance for water splitting.

Conclusion: Kai: So we've gone through how substituting chromium with copper in these high entropy alloys changes their ability to split water, right?

Mira: Yeah, this paper is looking at how that structural change—that substitution—actually connects to the performance numbers they see for hydrogen evolution and oxygen evolution reactions.

Lev: From an error correction standpoint, what I'm hearing is that they are mapping out a specific path in the materials space where we can predict performance based on elemental choice.

Kai: It’s about taking a complex system like this high entropy alloy and showing us exactly how tweaking one component, like switching chromium for copper, shifts the electronic structure enough to improve the binding energies for those reaction intermediates.

Mira: The authors are pointing out that this isn't just a random change; it's because that substitution causes a specific lattice distortion, about ten to fifteen percent of the lattice parameter change.

Lev: That distortion is what matters for me on hardware; I need to know if those calculated shifts in binding energy translate into stable, measurable performance when we try to run this stuff on actual electrochemical cells with all the noise and overhead involved.

Kai: It seems like the authors are emphasizing that even these relatively small structural adjustments can have a big impact on kinetics, which is what we care about for catalyst efficiency.

Mira: And they’re highlighting this as a way to build low cost, noble metal free sustainable catalysts for water splitting, which is a pretty big deal if it holds up under real-world conditions.

Lev: If the structural distortion doesn't cause catastrophic failure or just poor electronic coupling, then having these materials as building blocks for future hardware becomes much more feasible.

Kai: So the main point here is that they’re using high entropy alloys to design catalysts where we can control the surface chemistry through composition, instead of just throwing random metals together.

Mira: Yeah, it suggests that controlled composition is a way to engineer the catalytic surface precisely for optimal water splitting kinetics.

Lev: The big question now is whether this kind of tuning holds up when you move from a perfectly ordered bulk sample to the messy reality of a nanoparticle on an electrode surface.

Department of Materials Science and NanoEngineering, Rice University · Department of Material Science and Engineering, Indian Institute of Technology Kanpur · College of Technology, University of Brasília · Department of Metallurgical and Materials Engineering, Indian Institute of Technology Kharagpur · State University of Campinas · Federal University of Rio Grande do Norte

cond-mat.mtrl-sci

Submitted: 2026-07-29

Updated: 2026-11-16

License: http://creativecommons.org/licenses/by/4.0/

Importance score: 86/100

The gist: High-entropy alloys (HEAs) are investigated as promising electrocatalysts for energy conversion because their compositional complexity and tunable surface chemistry allow for synergistic effects that…

Key concepts

High-Entropy Alloys (HEAs)
These are alloys made with five or more principal elements in near-equal atomic concentrations, like FeCoNiMn. Their complexity allows for tunable surface chemistry and synergistic effects that can significantly improve catalytic performance compared to simpler materials.
Overpotential
This is the extra electrical potential needed to drive an electrochemical reaction (like water splitting) at a specific current density. A lower overpotential means the catalyst is more efficient and requires less energy to operate.
Tafel Slope
The Tafel slope describes how the reaction rate changes with the applied voltage during electrolysis. A lower Tafel slope indicates a faster increase in reaction rate for a small change in potential, signifying better catalytic kinetics.

Terminology

Summary

High-entropy alloys (HEAs) are investigated as promising electrocatalysts for energy conversion because their compositional complexity and tunable surface chemistry allow for synergistic effects that can substantially alter electrochemical kinetics. p. 0

Where the paper says it

Galvãoe*, Chandra Sekhar Tiwaryd*, Krishanu Biswasb*, Pulickel M Ajayana* aDepartment of Materials Science and NanoEngineering, Rice University, 6100 Main Street, Houston, Texas 77005, United States bDepartment of Material Science and Engineering, Indian Institute of Technology, Kanpur, Uttar Pradesh, India 208016 cCollege of Technology, University of Brasília, Brasília, DF, Brazil dDepartment of Metallurgical and Materials Engineering, Indian Institute of Technology, Kharagpur, West Bengal, India 721302 eState University of Campinas, Campinas, SP, Brazil f Department of Physics, Federal University of Rio Grande do Norte, Natal, RN, Brazil Abstract High-entropy alloys (HEAs), with their unique compositional-complexity and tunable surface chemistry, have emerged as promising electrocatalysts for energy conversion. The catalytic activity of HEA often arises from the interplay between the intrinsic activity of the individual elements and the synergistic effects generated at the interfaces.

Under the same experimental condition, HEA-Cu outperforms HEA-Cr towards both HER and OER. p. 1
Where the paper says it

Here we investigated the structure-property relationship of CrMnFeCoNi (HEA-Cr) and MnFeCoNiCu (HEA-Cu) HEAs by comparing the alkaline hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) activity. Under the same experimental condition, HEA-Cu outperforms HEA-Cr towards both HER and OER.

Substituting Cr with Cu significantly enhances the bifunctional activity, where HEA-Cu achieved a lower overpotential (538 mV) and Tafel slope (165 mVdec 1) when compared with HEA-Cr. p. 1
Where the paper says it

Under the same experimental condition, HEA-Cu outperforms HEA-Cr towards both HER and OER. Substituting Cr with Cu significantly enhances the bifunctional activity, where HEA-Cu achieved a lower overpotential (538 mV) and Tafel slope (165 mVdec ¹) when compared with HEA-Cr.

Computational analysis corroborates these findings, showing that Cu substitution modulates the electronic structure to provide favorable binding energies for reaction intermediates (H∗, O∗, OH∗, and OOH∗). p. 1
Where the paper says it

Substituting Cr with Cu significantly enhances the bifunctional activity, where HEA-Cu achieved a lower overpotential (538 mV) and Tafel slope (165 mVdec ¹) when compared with HEA-Cr. ⁻ Computational analysis corroborates these findings, showing that Cu substitution modulates the electronic-structure to provide favorable binding energies for reaction intermediates (H*, O*, OH*, and OOH*).

Structural Characterization of the Alloys

The structural analysis confirmed the formation of a single-phase face-centered cubic (FCC) solid solution in both the bulk alloy and the cryomilled powder for HEA-Cr. Subsequent substitution of Cr with Cu did not induce any phase transformation, and the alloy retained its single-phase FCC structure. p. 4

Where the paper says it

18– 20 Figure 1a presents the XRD pattern of the synthesized HEA-Cu nanoparticles. Subsequent substitution of Cr with Cu did not induce any phase transformation, and the alloy retained its single-phase FCC structure.

The systematic shift of the diffraction peaks indicates that although Cu inclusion into the FeCoNiMn matrix did not change the crystal structure, it did cause a modest adjustment of the lattice parameters resulting from the lattice distortion effect. p. 4
Where the paper says it

Subsequent substitution of Cr with Cu did not induce any phase transformation, and the alloy retained its single-phase FCC structure. Notably, the systematic shift of the diffraction peaks indicates that although Cu inclusion into the FeCoNiMn matrix did not change the crystal structure, it did cause a modest adjustment of the lattice parameters, resulting from the lattice distortion effect and which might also influence the high-entropy effect.

X-ray photoelectron spectroscopy (XPS) revealed that Cu predominantly exists in the Cu(I) (Cu oxidation+ state), while Fe and Co exhibit mixed-valence characteristics suggesting the coexistence of multiple oxidation states on the nanoparticle surface. p. 7
Where the paper says it

Overall, the XPS analysis reveals that Ni, and Mn are present predominantly in single oxidation states, namely, Ni² , and Mn⁴ , respectively. In contrast, Fe, Co and Cu exhibit mixed-valence ⁺ ⁺ characteristics, suggesting the coexistence of multiple oxidation states on the nanoparticle surface.

Specifically, Fe and Co show two satellite peaks, indicating the coexistence of both +2 and +3 oxidation states on the nanoparticle surface. p. 5
Where the paper says it

These results indicate the coexistence of both +2 and +3 oxidation states of cobalt on the nanoparticle surface. Fe 2p XPS (Figure 1(f)) spectrum shows two prominent peaks for Fe 2p3/2 and Fe 2p1/2, which are deconvoluted into four peaks and a satellite peak, indicating the coexistence of Fe in +3 and +2 valence states.

Electrochemical Performance Comparison

The activity of both HEA-Cr and HEA-Cu was investigated for both HER and OER in 1M alkaline water splitting. Cu required an overpotential of 0. p. 9

Where the paper says it

10 were employed to analyze the HER activity, as illustrated in Figure 2a. Cu required an overpotential of 0.

786 V vs RHE to achieve a current density of 10 mAcm−2, whereas the onset potential for CrMnFeCoNi and MnFeCoNiCu were observed to be 0. p. 9
Where the paper says it

786 V vs RHE to achieve a current density of 10 mAcm-2. In contrast, the onset potential for CrMnFeCoNi and MnFeCoNiCu were observed to 0.

601 and 0.538 V vs RHE, demonstrating superior performance over replacement of Cr by Cu. p. 9
Where the paper says it

In contrast, the onset potential for CrMnFeCoNi and MnFeCoNiCu were observed to 0. 538 V vs RHE, demonstrating superior performance over replacement of Cr by Cu.

Tafel analysis yielded Tafel slopes of 226 mVdec−1, 184, and 165mVdec−1 for Cu, CrMnFeCoNi, and MnFeCoNiCu respectively. p. 9
Where the paper says it

2,6 The reaction mechanism for both materials was further studied through Tafel analysis, as shown in Figure 2b. The Tafel slopes obtained were 226 mVdec-1, 184 and 165mVdec-1 for Cu, CrMnFeCoNi and MnFeCoNiCu, respectively.

The results indicate that the synergy of the five metals in the high entropy alloy enhances the catalytic HER activity compared to single Cu metal catalyst. p. 9
Where the paper says it

These values correspond to the Volmer-Heyrovsky mechanism governing the reaction. These results indicate that the synergy of the five metals in the high entropy alloy enhances the catalytic HER activity compared to single Cu metal catalyst.

Stability and Surface Reconstruction

Accelerated degradation tests (ADT) showed that after 3000 cycles, an increase in the catalytic activity was observed. The TEM analysis of the recovered HEA-Cu after OER revealed the formation of an outer layer forming a near core-shell structure. p. 1

Where the paper says it

⁻ Computational analysis corroborates these findings, showing that Cu substitution modulates the electronic-structure to provide favorable binding energies for reaction intermediates (H*, O*, OH*, and OOH*). Interestingly, unlike HER, recovered HEA-Cu after OER showed migration of Cu forming a Cu-rich outer layer shell with a multimetallic core.

This difference is attributed to the high affinity of Cu with oxygen which results in diffusion of Cu atoms in oxygen rich environment during OER. p. 1
Where the paper says it

Introduction: The growing demand for sustainable hydrogen production has intensified the search for advanced electrocatalysts capable of replacing noble-metal-based materials in water-splitting systems. Although Pt-, Ru-, and Ir-based catalysts exhibit excellent hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) activity, their scarcity, high cost, and limited long-term availability restrict large-scale implementation1–3.

In contrast, HER condition did not allow such migration therefore showed retention of homogeneous distribution of the elements and HER activity. p. 7
Where the paper says it

The microstructural characteristics of the HEA-Cr and HEA-Cu high-entropy alloys were further investigated. SEM analysis of the HEA-Cu (Figure S3) and HEA-Cr (Figure S4) shows homogeneous distribution of the elements.

Computational Insights into Catalytic Mechanism

DFT calculations supported these findings by showing that Cu substitution induces significant lattice distortions (10-15%) and acts as an electron acceptor to modulate the electronic environment of neighboring atoms. p. 1

Where the paper says it

Substituting Cr with Cu significantly enhances the bifunctional activity, where HEA-Cu achieved a lower overpotential (538 mV) and Tafel slope (165 mVdec ¹) when compared with HEA-Cr. ⁻ Computational analysis corroborates these findings, showing that Cu substitution modulates the electronic-structure to provide favorable binding energies for reaction intermediates (H*, O*, OH*, and OOH*).

This electronic shift results in weaker, more optimal binding energies for reaction intermediates like H∗, O∗, OH∗, and OOH∗ which facilitates more efficient adsorption and desorption kinetics for enhanced water splitting. p. 1
Where the paper says it

Substituting Cr with Cu significantly enhances the bifunctional activity, where HEA-Cu achieved a lower overpotential (538 mV) and Tafel slope (165 mVdec ¹) when compared with HEA-Cr. ⁻ Computational analysis corroborates these findings, showing that Cu substitution modulates the electronic-structure to provide favorable binding energies for reaction intermediates (H*, O*, OH*, and OOH*).

p. 1
Where the paper says it

Substituting Cr with Cu significantly enhances the bifunctional activity, where HEA-Cu achieved a lower overpotential (538 mV) and Tafel slope (165 mVdec ¹) when compared with HEA-Cr. ⁻ Computational analysis corroborates these findings, showing that Cu substitution modulates the electronic-structure to provide favorable binding energies for reaction intermediates (H*, O*, OH*, and OOH*).

The work clearly highlights the efficacy of HEA with controlled composition as building blocks for developing low cost, noble metal free sustainable catalyst for water splitting. p. 1
Where the paper says it

These findings demonstrate the potential of single-element substitution in HEAs as a strategy for designing high-performance, cost-effective catalysts for efficient water electrolysis. Introduction: The growing demand for sustainable hydrogen production has intensified the search for advanced electrocatalysts capable of replacing noble-metal-based materials in water-splitting systems.

p. 1
Where the paper says it

These findings demonstrate the potential of single-element substitution in HEAs as a strategy for designing high-performance, cost-effective catalysts for efficient water electrolysis. Introduction: The growing demand for sustainable hydrogen production has intensified the search for advanced electrocatalysts capable of replacing noble-metal-based materials in water-splitting systems.

Practical Applicability and Synergy

When tested with Vulcan carbon, HEA-Cu is better than HEA-Cr in both HER and OER performance. Addition of Vulcan carbon improves HER and OER performance by improving conductivity, charge transfer, catalyst dispersion, and active-site utilization. p. 1

Where the paper says it

High-entropy alloys (HEAs), composed of multiple principal elements distributed within a single or near-single-phase solid solution, have emerged as a promising catalyst platform. The compositionally complex atomic environments of HEAs enable simultaneous modulation of electronic structure, adsorption energetics, lattice strain, charge transfer, and surface reconstruction.

While comparing the HER overpotential values, Pt/C catalyst outperformed the HEA catalysts under same experimental condition. p. 1
Where the paper says it

Here we investigated the structure-property relationship of CrMnFeCoNi (HEA-Cr) and MnFeCoNiCu (HEA-Cu) HEAs by comparing the alkaline hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) activity. Under the same experimental condition, HEA-Cu outperforms HEA-Cr towards both HER and OER.

However, for OER, HEA-Cu showed close activity to RuO2 demonstrating the potential to replace the noble metal catalyst. p. 3
Where the paper says it

12 In another work, four adjacent 3d-metal elements (Fe, Co, Ni, and Mn) were assembled to form an HEA without phase separation. The HEA with a high d-band center where Mn has the largest atomic radius among the composition was found to be a face-centered cubic (fcc) phase without phase separation and it showed substantial OER catalytic activity which was further enhanced after modification of dband center using Pt and Ir.

The overall trend was found to be same as observed from the results obtained from no carbon added catalyst inks and other experimental conditions, HEA-Cu is better than HEA-Cr. p. 7
Where the paper says it

2 Electrochemical Characterization Activity of both HEA-Cr and HEA-Cu was investigated for both HER and OER in 1M alkaline water splitting a series of electrochemical tests. To understand the actual process, the catalyst ink was prepared without any conducting carbon and has been used for electrocatalysis study.

Conclusion

The current work investigates the structural and electrochemical impacts of substituting Cr with Cu in MnFeCoNi high-entropy alloy towards alkaline water electrolysis. Electrochemical evaluations in 1M KOH revealed that the Cu-substituted alloy (HEA-Cu) significantly outperformed its Cr-containing counterpart in both the HER and OER. p. 3

Where the paper says it

The HEA with a high d-band center where Mn has the largest atomic radius among the composition was found to be a face-centered cubic (fcc) phase without phase separation and it showed substantial OER catalytic activity which was further enhanced after modification of dband center using Pt and Ir. 13 All these findings highlight that even a single-element substitution in a multicomponent alloy can substantially alter the redox accessibility and electrochemical kinetics of the active surface.

Specifically, MnFeCoNiCu shows a lower HER onset potential of 0. p. 9
Where the paper says it

786 V vs RHE to achieve a current density of 10 mAcm-2. In contrast, the onset potential for CrMnFeCoNi and MnFeCoNiCu were observed to 0.

538 V and a Tafel slope of 165 mVdec 1, and when tested with Vulcan carbon, its OER activity proved comparable to the noble-metal standard RuO2. p. 1
Where the paper says it

Under the same experimental condition, HEA-Cu outperforms HEA-Cr towards both HER and OER. Substituting Cr with Cu significantly enhances the bifunctional activity, where HEA-Cu achieved a lower overpotential (538 mV) and Tafel slope (165 mVdec ¹) when compared with HEA-Cr.

Accelerated durability tests (ADT) showed that while HER conditions preserved a homogeneous elemental distribution, OER conditions triggered Cu migration to the surface, forming an oxygen-rich outer layer that can eventually lead to activity deterioration. p. 1
Where the paper says it

⁻ Computational analysis corroborates these findings, showing that Cu substitution modulates the electronic-structure to provide favorable binding energies for reaction intermediates (H*, O*, OH*, and OOH*). Interestingly, unlike HER, recovered HEA-Cu after OER showed migration of Cu forming a Cu-rich outer layer shell with a multimetallic core.

DFT calculations supported these findings by showing that Cu substitution induces significant lattice distortions (10-15%) and acts as an electron acceptor to modulate the electronic environment of neighboring atoms. This electronic shift results in weaker, more optimal binding energies for reaction intermediates like H∗, O∗, OH∗, and OOH∗ which facilitates more efficient adsorption and desorption kinetics for enhanced water splitting. The work clearly highlights the efficacy of HEA with controlled composition as building blocks for developing low cost, noble metal free sustainable catalyst for water splitting.

References

(1) Lawan, B. Non-Noble Metal Catalysts for the Alkaline Hydrogen Evolution Reaction: A Review. p. 1

Where the paper says it

Introduction: The growing demand for sustainable hydrogen production has intensified the search for advanced electrocatalysts capable of replacing noble-metal-based materials in water-splitting systems. Although Pt-, Ru-, and Ir-based catalysts exhibit excellent hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) activity, their scarcity, high cost, and limited long-term availability restrict large-scale implementation1–3.

(3) Ibn Shamsah, S. M. Earth-Abundant Electrocatalysts for Water Splitting: Current and Future Directions. p. 1

Where the paper says it

These findings demonstrate the potential of single-element substitution in HEAs as a strategy for designing high-performance, cost-effective catalysts for efficient water electrolysis. Introduction: The growing demand for sustainable hydrogen production has intensified the search for advanced electrocatalysts capable of replacing noble-metal-based materials in water-splitting systems.

(4) Medford, A. J.; Vojvodic, A.; Hummelshøj, J. S.; Voss, J.; Abild-Pedersen, F.; Studt, F.; Bligaard, T.; Nilsson, A.; Nørskov, J. K. From the Sabatier Principle to a Predictive Theory of Transition-Metal Heterogeneous Catalysis. p. 2

Where the paper says it

8 The importance of compositional tuning in HEAs is also evident from recent supercapacitor studies. Related studies on FeCoNiCrZn/Mn HEAs also showed that replacing one transition-metal component can shift the d-band characteristics and modify electrochemical behavior through multielement electronic synergy.

(5) Wang, B.; Liu, W.; Leng, Y.; Yu, X.; Wang, C.; Hu, L.; Zhu, X.; Wu, C.; Yao, Y.; Zou, Z. Strain Engineering of High-Entropy Alloy Catalysts for Electrocatalytic Water Splitting. p. 1

Where the paper says it

These findings demonstrate the potential of single-element substitution in HEAs as a strategy for designing high-performance, cost-effective catalysts for efficient water electrolysis. Introduction: The growing demand for sustainable hydrogen production has intensified the search for advanced electrocatalysts capable of replacing noble-metal-based materials in water-splitting systems.

(6) Chattopadhyay, S.; Wang, X.; Campos-Mata, A. p. 0

Where the paper says it

de Oliveiraa,f, Deepti Gangwarb , Tymofii S Pieshkova , Marcelo L. Pereira Juniora,c, Dhiman Banika,d, Astrid Campos-Mataa , Atin Pramanika , Soumyabrata Roya , Douglas S.

; Liang, F.; Ajayan, P. M. High-Entropy Oxide Toward Practical Hydrogen Production From Alkaline Fresh and Seawater. p. 1
Where the paper says it

These findings demonstrate the potential of single-element substitution in HEAs as a strategy for designing high-performance, cost-effective catalysts for efficient water electrolysis. Introduction: The growing demand for sustainable hydrogen production has intensified the search for advanced electrocatalysts capable of replacing noble-metal-based materials in water-splitting systems.

(7) Asghari Alamdari, A.; Jahangiri, H.; Yagci, M. B.; Igarashi, K.; Matsumoto, H.; Motallebzadeh, A.; Unal, U. Exploring Role of Mo and Mn in Improving the OER and HER Performance of CoCuFeNi-Based High-Entropy Alloys. p. 1

Where the paper says it

Although Pt-, Ru-, and Ir-based catalysts exhibit excellent hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) activity, their scarcity, high cost, and limited long-term availability restrict large-scale implementation1–3. High-entropy alloys (HEAs), composed of multiple principal elements distributed within a single or near-single-phase solid solution, have emerged as a promising catalyst platform.

(8) Campos-Mata, A. p. 0

Where the paper says it

de Oliveiraa,f, Deepti Gangwarb , Tymofii S Pieshkova , Marcelo L. Pereira Juniora,c, Dhiman Banika,d, Astrid Campos-Mataa , Atin Pramanika , Soumyabrata Roya , Douglas S.

; Gakhad, P.; Banik, D.; Chandra Mohanty, G. p. 0
Where the paper says it

Pereira Juniora,c, Dhiman Banika,d, Astrid Campos-Mataa , Atin Pramanika , Soumyabrata Roya , Douglas S. Galvãoe*, Chandra Sekhar Tiwaryd*, Krishanu Biswasb*, Pulickel M Ajayana* aDepartment of Materials Science and NanoEngineering, Rice University, 6100 Main Street, Houston, Texas 77005, United States bDepartment of Material Science and Engineering, Indian Institute of Technology, Kanpur, Uttar Pradesh, India 208016 cCollege of Technology, University of Brasília, Brasília, DF, Brazil dDepartment of Metallurgical and Materials Engineering, Indian Institute of Technology, Kharagpur, West Bengal, India 721302 eState University of Campinas, Campinas, SP, Brazil f Department of Physics, Federal University of Rio Grande do Norte, Natal, RN, Brazil Abstract High-entropy alloys (HEAs), with their unique compositional-complexity and tunable surface chemistry, have emerged as promising electrocatalysts for energy conversion.

; Chattopadhyay, S.; Gangwar, B. P.; Tiwary, C. S.; Singh, A. K., Composition Tuning of Structural High Entropy Alloy (Fe-Co-Ni-Cu-Mn/Zn) NanoElectrocatalysts for Synergistic Water Splitting. p. 4
Where the paper says it

12 These observations confirm the successful formation of a Cu-containing FCC HEA while preserving the structural integrity of the parent alloy. The elemental composition and oxidation states of the HEA-Cu high-entropy alloy nanoparticles were further examined by X-ray photoelectron spectroscopy (XPS), as illustrated in Figure 1(b-g).

(9) Mohanty, G. C.; Chowde Gowda, C.; Gakhad, P.; Sanjay, M.; Singh, A.; Biswas, K.; Tiwary, C. S., Effect of Zn/Mn on the Supercapacitor Behavior of High-Entropy FeCoNiCrZn/Mn Alloy. p. 2

Where the paper says it

8 The importance of compositional tuning in HEAs is also evident from recent supercapacitor studies. Related studies on FeCoNiCrZn/Mn HEAs also showed that replacing one transition-metal component can shift the d-band characteristics and modify electrochemical behavior through multielement electronic synergy.

(10) Mohanty, G. C.; Chowde Gowda, C.; Gakhad, P.; Das, S.; Sanjay, M.; Chowdhury, S.; Biswas, K., Iron-Cobalt-Nickel-Copper-Zinc (FeCoNiCuZn) High Entropy Alloy as Positive Electrode for High Specific Capacitance Supercapacitor.

(11) Liu, H.; Qin, H.; Kang, J.; Ma, L.; Chen, G.; Huang, Q.; Zhang, Z.; Liu, E., A Freestanding Nanoporous NiCoFeMoMn High-Entropy Alloy as an Efficient Electrocatalyst for Rapid Water Splitting. p. 1

Where the paper says it

These findings demonstrate the potential of single-element substitution in HEAs as a strategy for designing high-performance, cost-effective catalysts for efficient water electrolysis. Introduction: The growing demand for sustainable hydrogen production has intensified the search for advanced electrocatalysts capable of replacing noble-metal-based materials in water-splitting systems.

(12) Tang, F.; Wang, L.; Dessie Walle, M.; Mustapha, A.; Liu, Y. N. An Alloy Chemistry Strategy to Tailoring the D-Band Center of Ni by Cu for Efficient and Selective Catalytic Hydrogenation of Furfural. p. 3

Where the paper says it

HEA with a theoretical composition of Ni14Co14Fe14Mo6Mn52 has been synthesized for HER and OER bifunctional catalytic activity for efficient water splitting. 11 Another theoretical calculation demonstrated that Ni exhibits a downshifted d-band center once alloyed by Cu, which promoted the desorption of H from the Ni surface to improve the catalytic activity for hydrogenation reactions.

(13) Tian, J.; Rao, Y.; Shi, W.; Yang, J.; Ning, W.; Li, H.; Yao, Y.; Zhou, H., Sabatier Relations in Electrocatalysts Based on High-Entropy Alloys with Wide-Distributed dBand Centers for Li-O2 Batteries. p. 1

Where the paper says it

Although Pt-, Ru-, and Ir-based catalysts exhibit excellent hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) activity, their scarcity, high cost, and limited long-term availability restrict large-scale implementation1–3. High-entropy alloys (HEAs), composed of multiple principal elements distributed within a single or near-single-phase solid solution, have emerged as a promising catalyst platform.

(14) Talbot, A.; Shang, X.; Wang, W.; Cheng, C.; Lyu, T.; Zou, Y., Laser Remelting of a CrMnFeCoNi High-Entropy Alloy: Effect of Energy Density on Elemental Segregation. p. 4

Where the paper says it

Subsequent substitution of Cr with Cu did not induce any phase transformation, and the alloy retained its single-phase FCC structure. Notably, the systematic shift of the diffraction peaks indicates that although Cu inclusion into the FeCoNiMn matrix did not change the crystal structure, it did cause a modest adjustment of the lattice parameters, resulting from the lattice distortion effect and which might also influence the high-entropy effect.

(15) Mohanty, G. C.; Gowda, C. C.; Gakhad, P.; Sanjay, M.; Sarkar, S.; Biswas, K.; Singh, A., High Energy Density Liquid State Asymmetric Supercapacitor Devices Using Co–Cr–Ni–Fe–Mn High Entropy Alloy. p. 0

Where the paper says it

Pereira Juniora,c, Dhiman Banika,d, Astrid Campos-Mataa , Atin Pramanika , Soumyabrata Roya , Douglas S. Galvãoe*, Chandra Sekhar Tiwaryd*, Krishanu Biswasb*, Pulickel M Ajayana* aDepartment of Materials Science and NanoEngineering, Rice University, 6100 Main Street, Houston, Texas 77005, United States bDepartment of Material Science and Engineering, Indian Institute of Technology, Kanpur, Uttar Pradesh, India 208016 cCollege of Technology, University of Brasília, Brasília, DF, Brazil dDepartment of Metallurgical and Materials Engineering, Indian Institute of Technology, Kharagpur, West Bengal, India 721302 eState University of Campinas, Campinas, SP, Brazil f Department of Physics, Federal University of Rio Grande do Norte, Natal, RN, Brazil Abstract High-entropy alloys (HEAs), with their unique compositional-complexity and tunable surface chemistry, have emerged as promising electrocatalysts for energy conversion.

(16) Kumar, J.; Linda, A.; Sadhasivam, M.; Pradeep, K. G.; Gurao, N. P.; Biswas, K., The Effect of Al Addition on Solid Solution Strengthening in CoCrFeMnNi: Experiment and Modelling. p. 1

Where the paper says it

Although Pt-, Ru-, and Ir-based catalysts exhibit excellent hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) activity, their scarcity, high cost, and limited long-term availability restrict large-scale implementation1–3. High-entropy alloys (HEAs), composed of multiple principal elements distributed within a single or near-single-phase solid solution, have emerged as a promising catalyst platform.

(17) Medvedev, N., Thermodynamic Properties of CrMnFeCoNi High Entropy Alloy at Elevated Electronic Temperatures. p. 3

Where the paper says it

Among transition-metal HEAs, the CrMnFeCoNi Cantor alloy is one of the most extensively studied model systems because of its relatively stable face-centered cubic structure, compositional homogeneity that allows scope to investigate structure-property relationships. 9,14–17 In particular, Cr is generally associated with the formation of stable oxide/hydroxide surface layers and improved structural durability, whereas replacing Cu may promote electronic conductivity, local compositional heterogeneity, and modify adsorption/desorption kinetics of the redox intermediates.

(18) Cantor, B. p. 3

Where the paper says it

13 All these findings highlight that even a single-element substitution in a multicomponent alloy can substantially alter the redox accessibility and electrochemical kinetics of the active surface. Among transition-metal HEAs, the CrMnFeCoNi Cantor alloy is one of the most extensively studied model systems because of its relatively stable face-centered cubic structure, compositional homogeneity that allows scope to investigate structure-property relationships.

; Chang, I. T. H.; Knight, P.; Vincent, A. J. B., Microstructural Development in Equiatomic Multicomponent Alloys. p. 7
Where the paper says it

In contrast, Fe, Co and Cu exhibit mixed-valence ⁺ ⁺ characteristics, suggesting the coexistence of multiple oxidation states on the nanoparticle surface. The microstructural characteristics of the HEA-Cr and HEA-Cu high-entropy alloys were further investigated.

(19) Otto, F.; Dlouhý, A.; Somsen, C.; Bei, H.; Eggeler, G.; George, E. P., The Influences of Temperature and Microstructure on the Tensile Properties of a CoCrFeMnNi HighEntropy Alloy. p. 4

Where the paper says it

1 Structural analysis The equiatomic FeCoNiCrMn alloy nanoparticles were synthesized via arc melting followed by cryo-milling. Room-temperature X-ray diffraction (XRD) analysis confirmed the formation of a single-phase face-centered cubic (FCC) solid solution in both the bulk alloy and the cryomilled powder, crystallizing in the Fm-3m space group.

(20) Chen, B. R.; Yeh, A. C.; Yeh, J. W., Effect of One-Step Recrystallization on the Grain Boundary Evolution of CoCrFeMnNi High Entropy Alloy and Its Subsystems. p. 4

Where the paper says it

Subsequent substitution of Cr with Cu did not induce any phase transformation, and the alloy retained its single-phase FCC structure. Notably, the systematic shift of the diffraction peaks indicates that although Cu inclusion into the FeCoNiMn matrix did not change the crystal structure, it did cause a modest adjustment of the lattice parameters, resulting from the lattice distortion effect and which might also influence the high-entropy effect.

(21) Karikalan, N.; Karthik, R.; Chen, S. M.; Karuppiah, C.; Elangovan, A., Sonochemical Synthesis of Sulfur Doped Reduced Graphene Oxide Supported CuS Nanoparticles for the Non-Enzymatic Glucose Sensor Applications.

(22) Wang, Y.; Wang, L.; Wei, B.; Miao, Q.; Yuan, Y.; Yang, Z.; Fei, W., Electrodeposited Nickel Cobalt Sulfide Nanosheet Arrays on 3D-Graphene/Ni Foam for High-Performance Supercapacitors.

(23) He, X.; Hu, Z.; Zou, Q.; Yang, J.; Guo, R.; Wu, L., Co-Deposition of Co–Ni Alloy Catalysts from an Ethylene Glycol System for the Hydrogen Evolution Reaction. p. 1

Where the paper says it

Introduction: The growing demand for sustainable hydrogen production has intensified the search for advanced electrocatalysts capable of replacing noble-metal-based materials in water-splitting systems. Although Pt-, Ru-, and Ir-based catalysts exhibit excellent hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) activity, their scarcity, high cost, and limited long-term availability restrict large-scale implementation1–3.

(24) Tiwari, P.; Gangwar, D.; Rath, C., Studies on the Structural, Magnetic and Electrochemical Properties of GdMn1−xFexO3 (x = 0, 0. p. 2

Where the paper says it

8 The importance of compositional tuning in HEAs is also evident from recent supercapacitor studies. Related studies on FeCoNiCrZn/Mn HEAs also showed that replacing one transition-metal component can shift the d-band characteristics and modify electrochemical behavior through multielement electronic synergy.

1 and 0.2) Perovskite Compounds.

(25) Gangwar, D.; Rath, C., Spin Dynamics of Hydrothermally Synthesized δ-MnO2 Nanowhiskers. p. 5

Where the paper says it

6 The high-resolution Cu 2p XPS spectrum (Figure 1(c)) exhibits two distinct peaks centered at 932. 3 eV, corresponding to the Cu 2p3/2 and Cu 2p1/2 spin-orbit components, respectively.

(26) Charry, J.; Tkatchenko, A. Van Der Waals Radiiof Free and Bonded Atoms from Hydrogen (Z = 1) to Oganesson (Z = 118). p. 1

Where the paper says it

2 kinetics of the active surface. Here we investigated the structure-property relationship of CrMnFeCoNi (HEA-Cr) and MnFeCoNiCu (HEA-Cu) HEAs by comparing the alkaline hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) activity.

J. Chem. Theory Comput.

(27) Bencherifa, I.; Belkhettab, I.; Derkaoui, K.; Dabou, O.; Chetoui, A.; Latreche, S.; Daoud, I., Unveiling the Impact of Al and Cr Alloying on Structure and HER Performance of CoCuZnMnNiFe High-Entropy Alloy Nanoparticles. p. 4

Where the paper says it

The elemental composition and oxidation states of the HEA-Cu high-entropy alloy nanoparticles were further examined by X-ray photoelectron spectroscopy (XPS), as illustrated in Figure 1(b-g). The survey-scan XPS spectrum (Figure 1(b)) confirms the presence of Co, Cu, Fe, Mn, and Ni, demonstrating the successful incorporation of Cu into the CoFeMnNi alloy structure.

(28) Wang, F.; Chen, S.; Tong, Z.; Liu, X.; Zhou, H.; He, Y.; Shu, G.; Jin, Y.; Zheng, W., Electronegativity-Modulated High-Entropy Catalysts for Efficient HER and OER. p. 1

Where the paper says it

Interestingly, unlike HER, recovered HEA-Cu after OER showed migration of Cu forming a Cu-rich outer layer shell with a multimetallic core. These findings demonstrate the potential of single-element substitution in HEAs as a strategy for designing high-performance, cost-effective catalysts for efficient water electrolysis.

(29) Ipaves, B.; Justo, J. F.; de Almeida, J. M.; Assali, L. V. C.; Alves da Silva Autreto, Metal-Free Doping in Two-Dimensional Carbon C4N2 for Enhanced Hydrogen Evolution. p. 1

Where the paper says it

Introduction: The growing demand for sustainable hydrogen production has intensified the search for advanced electrocatalysts capable of replacing noble-metal-based materials in water-splitting systems. Although Pt-, Ru-, and Ir-based catalysts exhibit excellent hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) activity, their scarcity, high cost, and limited long-term availability restrict large-scale implementation1–3.

p. 1
Where the paper says it

Introduction: The growing demand for sustainable hydrogen production has intensified the search for advanced electrocatalysts capable of replacing noble-metal-based materials in water-splitting systems. Although Pt-, Ru-, and Ir-based catalysts exhibit excellent hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) activity, their scarcity, high cost, and limited long-term availability restrict large-scale implementation1–3.

p. 1
Where the paper says it

Introduction: The growing demand for sustainable hydrogen production has intensified the search for advanced electrocatalysts capable of replacing noble-metal-based materials in water-splitting systems. Although Pt-, Ru-, and Ir-based catalysts exhibit excellent hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) activity, their scarcity, high cost, and limited long-term availability restrict large-scale implementation1–3.

p. 1
Where the paper says it

Introduction: The growing demand for sustainable hydrogen production has intensified the search for advanced electrocatalysts capable of replacing noble-metal-based materials in water-splitting systems. Although Pt-, Ru-, and Ir-based catalysts exhibit excellent hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) activity, their scarcity, high cost, and limited long-term availability restrict large-scale implementation1–3.

p. 1
Where the paper says it

Introduction: The growing demand for sustainable hydrogen production has intensified the search for advanced electrocatalysts capable of replacing noble-metal-based materials in water-splitting systems. Although Pt-, Ru-, and Ir-based catalysts exhibit excellent hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) activity, their scarcity, high cost, and limited long-term availability restrict large-scale implementation1–3.

(30) Chodvadiya, D.; Som, N. N.; Jha, P. K.; Chakraborty, B., Enhancement in the Catalytic Activity of Two-Dimensional α-CN by B, Si and P Doping for Hydrogen Evolution and Oxygen Evolution Reactions. p. 1

Where the paper says it

2 kinetics of the active surface. Here we investigated the structure-property relationship of CrMnFeCoNi (HEA-Cr) and MnFeCoNiCu (HEA-Cu) HEAs by comparing the alkaline hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) activity.

(31) Kamaruddin, H.; Jianghong, Z.; Yu, L.; Yuefan, W.; Yizhong, H., A Review of Noble Metal-Free High Entropy Alloys for Water Splitting Applications. p. 1

Where the paper says it

These findings demonstrate the potential of single-element substitution in HEAs as a strategy for designing high-performance, cost-effective catalysts for efficient water electrolysis. Introduction: The growing demand for sustainable hydrogen production has intensified the search for advanced electrocatalysts capable of replacing noble-metal-based materials in water-splitting systems.

p. 1
Where the paper says it

These findings demonstrate the potential of single-element substitution in HEAs as a strategy for designing high-performance, cost-effective catalysts for efficient water electrolysis. Introduction: The growing demand for sustainable hydrogen production has intensified the search for advanced electrocatalysts capable of replacing noble-metal-based materials in water-splitting systems.

p. 1
Where the paper says it

These findings demonstrate the potential of single-element substitution in HEAs as a strategy for designing high-performance, cost-effective catalysts for efficient water electrolysis. Introduction: The growing demand for sustainable hydrogen production has intensified the search for advanced electrocatalysts capable of replacing noble-metal-based materials in water-splitting systems.

p. 1
Where the paper says it

These findings demonstrate the potential of single-element substitution in HEAs as a strategy for designing high-performance, cost-effective catalysts for efficient water electrolysis. Introduction: The growing demand for sustainable hydrogen production has intensified the search for advanced electrocatalysts capable of replacing noble-metal-based materials in water-splitting systems.

p. 1
Where the paper says it

These findings demonstrate the potential of single-element substitution in HEAs as a strategy for designing high-performance, cost-effective catalysts for efficient water electrolysis. Introduction: The growing demand for sustainable hydrogen production has intensified the search for advanced electrocatalysts capable of replacing noble-metal-based materials in water-splitting systems.

(32) Ipaves, B.; Justo, J. F.; de Almeida, J. M.; Assali, L. V. C.; Alves da Silva Autreto., Metal-Free Doping in Two-Dimensional Carbon C4N2 for Enhanced Hydrogen Evolution.

(33) Kamaruddin, H.; Jianghong, Z.; Yu, L.; Yuefan, W.; Yizhong, H., A Review of Noble Metal-Free High Entropy Alloys for Water Splitting Applications.

(34) Ipaves, B.; Justo, J. F.; de Almeida, J. M.; Assali, L. V. C.; Alves da Silva Autreto., Metal-Free Doping in Two-Dimensional Carbon C4N2 for Enhanced Hydrogen Evolution.

(35) Kamaruddin, H.; Jianghong, Z.; Yu, L.; Yuefan, W.; Yizhong, H., A Review of Noble Metal-Free High Entropy Alloys for Water Splitting Applications.

(36) Ipaves, B.; Justo, J. F.; de Almeida, J. M.; Assali, L. V. C.; Alves da Silva Autreto., Metal-Free Doping in Two-Dimensional Carbon C4N2 for Enhanced Hydrogen Evolution.

(37) Kamaruddin, H.; Jianghong, Z.; Yu, L.; Yuefan, W.; Yizhong, H., A Review of Noble Metal-Free High Entropy Alloys for Water Splitting Applications.

(38) Ipaves, B.; Justo, J. F.; de Almeida, J. M.; Assali, L. V. C.; Alves da Silva Autreto., Metal-Free Doping in Two-Dimensional Carbon C4N2 for Enhanced Hydrogen Evolution.

(39) Kamaruddin, H.; Jianghong, Z.; Yu, L.; Yuefan, W.; Yizhong, H., A Review of Noble Metal-Free High Entropy Alloys for Water Splitting Applications.

(40) Ipaves, B.; Justo, J. F.; de Almeida, J. M.; Assali, L.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Improved predictive modeling for HEA performance by incorporating DFT calculations showing that Cu substitution induces significant lattice distortions (10-15%) and acts as an electron acceptor to modulate the electronic environment of neighboring atoms. This allows AI to predict how single-element substitution affects reaction kinetics and surface binding energies for HER and OER before experimental synthesis.

  2. Enhanced catalyst design capability by enabling AI to simulate surface reconstruction during different reaction conditions, specifically predicting that under OER conditions, Cu tends to migrate to the surface resulting in surface structural reconstruction. This helps in designing catalysts that maintain activity under harsh operating environments.

  3. Optimized material selection for specific electrochemical tasks by using the Sabatier principle derived from computational results, allowing the AI to select compositions that favor moderate binding strength for reaction intermediates like H and OOH to enhance desorption kinetics.

Abstract

High-entropy alloys (HEAs), with their unique compositional-complexity and tunable surface chemistry, have emerged as promising electrocatalysts for energy conversion. The catalytic activity of HEA often arises from the interplay between the intrinsic activity of the individual elements and the synergistic effects generated at the interfaces. Even a single-element substitution in a multicomponent HEA can substantially alter the surface-chemistry and electrochemical kinetics of the active surface. Here we investigated the structure-property relationship of CrMnFeCoNi (HEA-Cr) and MnFeCoNiCu (HEA-Cu) HEAs by comparing the alkaline hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) activity. Under the same experimental condition, HEA-Cu outperforms HEA-Cr towards both HER and OER. Substituting Cr with Cu significantly enhances the bifunctional activity, where HEA-Cu achieved a lower overpotential (538 mV) and Tafel slope (165 mVdec-1) when compared with HEA-Cr. Computational analysis corroborates these findings, showing that Cu substitution modulates the electronic-structure to provide favorable binding energies for reaction intermediates (H*, O*, OH*, and OOH*). Interestingly, unlike HER, recovered HEA-Cu after OER showed migration of Cu forming a Cu-rich outer layer shell with a multimetallic core. These findings demonstrate the potential of single-element substitution in HEAs as a strategy for designing high-performance, cost-effective catalysts for efficient water electrolysis.

Related papers