Scanning Gate Microscopy Modulation of Supercurrent in Graphene Josephson Junctions
Listen
Radio episode about this paper
Transcript
Introduction to the show: ident: Quantum Radio. Generated commentary on the latest quantum physics and condensed matter papers.
Kai: I'm Kai.
Mira: And I'm Mira, here with Lev.
Kai: We're looking at the paper: "Scanning Gate Microscopy Modulation of Supercurrent in Graphene Josephson Junctions".
Title and authors: Kai: Now that we know what this paper does, let's talk about the setup and the core idea behind it. The title itself, "Scanning Gate Microscopy Modulation of Supercurrent in Graphene Josephson Junctions," tells you exactly what we're looking at.
Mira: It’s focusing on graphene Josephson junctions specifically because they offer high carrier mobility and gate tunability for their critical currents, which is a big deal for quantum stuff. They are using this Scanning Gate Microscopy technique to achieve that local mapping.
Lev: What I find interesting is the reliance on the AFM tip acting as a movable, non-contact local gate. That implies we're trying to get spatial information without physically touching the delicate superconducting structure, which is hard work for any quantum system.
Kai: Exactly. It moves us from just measuring transport across a whole sample to figuring out what's happening at specific points on that sample surface while you're sweeping the tip around.
Mira: And this paper sets up the context by noting that traditional characterization relies on spatially averaging, which treats the device as a black box, but SGM allows access to those local transport properties.
Lev: So they’re trying to bridge that gap between macroscopic electrical measurements and truly local physics in these novel platforms.
The paper's summary: Kai: In terms of what the paper actually found, they used this SGM setup on hBN-encapsulated graphene junctions and managed to get a large tip-induced modulation of hundreds of nanoamperes.
Mira: That is a significant number when you consider the scale, and they didn't just measure it; they studied how that modulation changes based on the voltage bias of the tip and how far away the tip is from the sample.
Lev: They looked at both tip voltage bias and distance. That’s crucial because if you can map out a function relating those two variables, you start building a model for control.
Kai: And their main finding there was that they saw a reduction in the switching current when they applied a negative tip bias, but an enhancement when they used a positive tip bias.
Mira: That observation is consistent with what they call a positive back-gate modulation coefficient beta BG n greater than zero, which suggests the back-gate effect and the tip effect are working in similar directions under certain doping conditions.
Lev: It’s interesting because it gives us a quantitative measure of how much that tip influences the critical current, which is usually just assumed to be present.
The paper's improvements: Kai: What the authors suggest as an improvement is developing a complete analytical model to describe this tip-induced modulation experimentally observed. They derived an expression for the total critical current based on modeling the tip as a biased point-like conductive tip.
Mira: This model, which describes how the switching current changes with distance, says that you get something like I sub d equals A arcsinh (L over two of d over vacuum plus delta) plus I sub zero <ref:2607.26689#pg3>.
Lev: That specific relationship is what really sets it up for future experiments because now we have a mathematical framework to precisely test how sensitive the junction is to the tip's position.
Kai: It also highlights that GJJs are an ideal platform for SGM because they support larger switching currents, up to several microamperes, which is two orders of magnitude larger than what was seen in some previous work.
Mira: And they showed that the tip’s effect on the current is comparable to the back-gate action itself, with a value like beta tip n equals twenty-two point nine plus one point seven nanoamperes per volt in the electron doping regime.
Lev: That comparison between beta tip and beta BG shows that you can treat them as similar knobs for tuning the superconducting state locally.
Conclusion: Kai: So, to wrap up this paper on "Scanning Gate Microscopy Modulation of Supercurrent in Graphene Josephson Junctions," the authors have successfully shown how SGM can spatially map and modulate supercurrent transport with high resolution.
Mira: The main implication is that graphene-based junctions are very suitable for precise local mapping of superconducting phenomena because they allow for this kind of spatial investigation.
Lev: And what we get from the analytical model is a way to precisely control the junction's behavior by knowing exactly how far you place that AFM tip and what voltage you apply it.
Kai: They also pointed out that observing asymmetry in the SGM maps suggests there’s a non-uniform electrostatic potential landscape, which they suggest can be actively perturbed by the tip.
Mira: That opens up a new direction where we don't just look at disorder; we can use the tip to change the potential shape and polarity locally.
Lev: For real hardware running this, the key is making sure that this spatial control mechanism doesn't introduce too much noise or overhead when you try to implement it on a larger device.
Istituto Nanoscienze–CNR · Dipartimento di Fisica, Universita di Genova · CNR-SPIN · Center for Nanotechnology Innovation, Laboratorio NEST, Istituto Italiano di Tecnologia · Research Center for Electronic and Optical Materials, National Institute for Materials Science Research Center for Materials Nanoarchitectonics
cond-mat.mes-hall, cond-mat.supr-con
Submitted: 2026-07-29
Updated: 2026-07-29
Comments: 25 pages, 9 figures
Journal ref: Appl. Phys. Lett. 129, 162601 (2026)
DOI: 10.1063/5.0354810
License: http://creativecommons.org/licenses/by/4.0/
The gist: Scanning Gate Microscopy Modulation of Supercurrent in Graphene Josephson Junctions investigates supercurrent transport in hBN-encapsulated graphene Josephson junctions using a Scanning Gate…
Key concepts
- Graphene Josephson Junctions (GJJs)
- These are superconducting junctions made of graphene layers separated by an insulator like hBN. They are valuable because graphene has high carrier mobility and allows the critical current to be controlled using a gate voltage, making them excellent platforms for studying quantum effects.
- Scanning Gate Microscopy (SGM)
- SGM uses a conductive tip on an Atomic Force Microscope to act as a local gate. It allows researchers to spatially map electrical transport properties, like supercurrents, with high spatial resolution in gate-tunable materials such as graphene.
- Critical Current Modulation Coefficient ($eta$)
- This coefficient quantifies how much the critical current changes in response to an external influence, like a tip voltage or a backgate. The study found that the tip-induced modulation coefficient ($eta_{tip}$) is comparable to the backgate's effect, indicating strong local control over superconductivity.
- Analytical Model for Switching Current ($I_{sw}(d)$)
- A mathematical model was created to precisely describe how the switching current changes as a function of the tip-to-sample distance ($d$). This model helps researchers understand the physical relationship between the tip's position and its effect on the junction's supercurrent.
Terminology
Summary
Scanning Gate Microscopy Modulation of Supercurrent in Graphene Josephson Junctions investigates supercurrent transport in hBN-encapsulated graphene Josephson junctions using a Scanning Gate Microscope to achieve local mapping and manipulation of gate-tunable superconducting phenomena with unprecedented spatial resolution
Device Platform and Context
Graphene Josephson junctions (GJJs) are an excellent platform for quantum technologies due to the combination of high carrier mobility, ballistic transport, and large gate-tunable critical currents preserved under quantizing magnetic fields. These GJJs, encapsulated in hexagonal Boron Nitride (hBN), stand out for their large supercurrent densities, high interface transparency, and ballistic transport over micrometer-scale. p. 0 [2, 3, 4, 5, 6,
7, 8, 9, 10, 11] Utilizing field-effect-tunable materials such as graphene as the weak link enables
gate control of the superconducting properties, such as the critical current. [12, 13, 14, 15, 16,
17] JJs based on graphene (GJJs) encapsulated in hexagonal Boron Nitride (hBN) stand out
for their large supercurrent densities, high interface transparency, and ballistic transport over
micrometer-scale. [1] Nowadays, JJs serve as key
elements for a wide array of quantum technologies and superconducting devices. [2, 3, 4, 5, 6,
7, 8, 9, 10, 11] Utilizing field-effect-tunable materials such as graphene as the weak link enables
gate control of the superconducting properties, such as the critical current. [12, 13, 14, 15, 16,
17] JJs based on graphene (GJJs) encapsulated in hexagonal Boron Nitride (hBN) stand out
for their large supercurrent densities, high interface transparency, and ballistic transport over
micrometer-scale. [18, 19] These features enable enticing new capabilities, such as proximity
effect in the quantum Hall regime,[20, 21, 22, 23, 24, 25] a promising path toward the realization
of hardware for topological quantum computation.Where the paper says it
Where the paper says it
Where the paper says it
SGM Technique Application
Scanning Gate Microscopy (SGM) is a powerful technique for spatial mapping of electrical transport in gate-tunable materials, based on a voltage-biased conductive tip of an Atomic Force Microscope (AFM) that acts as a movable, non-contact local gate. SGM has been employed to spatially resolve transport in various platforms, including graphene. p. 1 [30, 31] They succeeded in imaging coherent electron flow within a quantum point
contact in a two-dimensional electron gas, reporting the observation of interference fringes
and branching of electron paths. [30, 31, 32, 33, 34] Subsequently, SGM has been employed to
spatially resolve transport in a variety of platforms, including semiconductors,[35, 36] quantum wells,[37] two-dimensional electron gases (2DEGs),[38, 39, 40] quantum dots,[41] and
graphene. [49, 50] The technique has also been extensively employed under large magnetic fields to
investigate edge transport in the quantum Hall regime. [51, 52, 53, 54, 55]
Since the critical current of GJJs is widely gate-tunable,[18] SGM appears as a powerful
tool for the spatial investigation of local transport properties in the superconducting regime.Where the paper says it
Where the paper says it
Experimental Findings on Modulation
The study employed SGM to investigate supercurrent modulation in hBN-encapsulated GJJs, obtaining a large tip-induced modulation of hundreds on nA. The researchers studied the tip-induced supercurrent modulation as a function of tip voltage bias (at fixed tip height) and of tip-to-sample distance. p. 1 Thanks to the large switching currents typical of these devices and a geometry that
is particularly suitable for SGM investigation, we obtain a large tip-induced modulation of
hundreds on nA. We study the tip-induced supercurrent modulation as a function of tip
voltage bias (at fixed tip height) and of tip-to-sample distance. We observe
a reduction of the switching current when we apply a negative tip bias, while we observe an
enhancement for positive tip bias. This is expected and consistent with a positive back-gate
modulation coefficient βBG,n > 0: in the electron doping regime, supercurrent is enhanced
(reduced) as the back-gate voltage is increased (reduced).Where the paper says it
Where the paper says it
Modeling and Conclusion
The work provides a complete and exhaustive characterization of the tip-induced modulation of the critical current by developing an analytical model that describes the experimental observations. The analytical model, derived from modeling the tip as a biased point-like conductive tip, yields an expression for the total critical current as a function of distance. p. 6 Following Ref. [44], we model the SGM tip as a biased point-like conductive tip placed in
front of a conductive plane (graphene). Our analytical model
thoroughly describes the experimental data. For all these reasons, we establish graphene-based
Josephson junctions as the ideal platform for spatial investigation of supercurrent transport by
SGM. In addition, we analyzed how the switching current evolves with varying tip-to-sample distance,
by developing an analytical model that successfully describes the experimental observations. We remark that the switching current modulation obtained in this work is two orders of
magnitude larger than in Ref. This was achieved by leveraging the favorable properties
of GJJs for SGM investigation. GJJs support larger switching currents up to several µA, an
order of magnitude larger as compared to the InSb nanoflags presented in Ref.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Summary of Results
Table S1 summarizes the backgate- and tip-induced switching current modulation coefficients for both junction J1 and J2 across n-doping and p-doping regimes. The tip's effect is comparable to the backgate action, with values such as βtip,n = 22.9 ± 1.7 nA/V in the electron doping regime. p. 2 The vertical dashed line indicates the selected working point for the analysis
presented in Fig. 2, at VBG = −3 V, in the electron doping regime. For instance, the tip might be used to change both shape and polarity
of the potential, possibly working as an on/off switch for the diode effect. In conclusion, this work establishes a robust foundation for advancing SGM on GJJs for
precise local mapping of superconducting phenomena, even in combination with magnetic fields,
that were previously inaccessible with conventional transport characterization techniques and
devices. We also note that SGM maps in Fig. 2a-e reveal a slightly asymmetric modulation of the
switching current, likely originating from a non-homogeneous electrostatic potential landscape
across the device that directly influences the effect of the tip on the total switching current of the
junction.Where the paper says it
Where the paper says it
Where the paper says it
Table S1
| J1 | J2 |
|---|---|
Doping βBG [nA/V] βtip [nA/V] βBG [nA/V] βtip [nA/V]
n-doping +118 ± 3 +18.8 ± 0.8 +76.7 ± 1.8 +22.9 ± 1.7
p-doping −17 ± 2 −3.2 ± 0.3 −10.9 ± 1.1 −2.8 ± 0.2
Table S3
| J1 | J2 |
|---|---|
-10 V-66 ± 11-94 ± 5 254 ± 10 399 ± 6
+10 V 62 ± 7 64 ± 6 241 ± 6370 ±8
Table S2
| Parameter Symbol | Value |
|---|---|
| Primitive vector length a | 14 nm |
| Hopping energy t | 67.5 meV |
Sample width W 3 µm
| Sample length L | 600 nm |
Table S4
| A [nA] Ic,0 [nA] Vtip J1 J2 J1 J2 |
|---|---|
-10 V-66 ± 11 −94 ± 5 254 ± 10 399 ± 6
+10 V 62 ± 7 64 ± 6 241 ± 6370 ±8
Doping βBG [nA/V] βtip [nA/V] βBG [nA/V] βtip [nA/V]
|---|---|
n-doping +118 ± 3 +18.8 ± 0.8 +76.7 ± 1.8 +22.9 ± 1.7
p-doping −17 ± 2 −3.2 ± 0.3 −10.9 ± 1.1 −2.8 ± 0.2
| Parameter Symbol | Value |
|---|---|
| Primitive vector length a | 14 nm |
| Hopping energy t | 67.5 meV |
Sample width W 3 µm
| Sample length L | 600 nm
| Parameter Symbol | Value |
|---|---|
| Primitive vector length a | 14 nm |
| Hopping energy t | 67.
Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.
Improvements for AI systems
-
Improved AI system can perform local mapping of gate-tunable superconducting phenomena with unprecedented spatial resolution by using Scanning Gate Microscopy to investigate supercurrent transport in hBN-encapsulated graphene Josephson junctions. This allows for the
local mapping and manipulation
of these properties at a high degree of detail. -
Improved AI system can quantitatively predict tip-induced modulation efficiency (beta tip) based on experimental data and numerical simulations, achieving results such as beta tip n = 18.8 +/- 0.8 nA/V in the electron doping regime for junction J1. This capability allows for direct comparison between experimental measurements and theoretical models with high fidelity.
-
Improved AI system can develop an analytical model to describe how the switching current evolves with varying tip-to-sample distance, providing a framework for further experiments. This model, such as Ic(dvac) = A arcsinh (L 2(dvac + delta)) + Ic,0, allows researchers to precisely investigate the effect of the tip at different distances.
-
Improved AI system can identify spatial variations in the switching current maps, such as
a non-uniform electrostatic potential landscape,
which likely originates from disorder. This enables the use of SGM not only for spatial investigation but also as an active tool to locally perturb this potential to change its shape and polarity.
Abstract
Graphene Josephson junctions represent an excellent platform for quantum technologies, thanks to the combination of high carrier mobility, ballistic transport, and large gate-tunable critical currents, preserved even under quantizing magnetic fields. Investigating the spatial distribution of supercurrent flow could be crucial for elucidating transport mechanisms and advancing the engineering of these devices. In this work, we employ a Scanning Gate Microscope to investigate supercurrent transport in hBN-encapsulated graphene Josephson junctions contacted by Niobium leads. We study the supercurrent modulation as a function of the applied tip voltage bias and tip-to-sample distance, and provide a complete characterization of the tip-induced modulation. Our experimental results are quantitatively consistent with numerical simulations and pave the way towards local mapping and manipulation of gate-tunable superconducting phenomena with unprecedented spatial resolution.
Sources
Related papers
- Coexistence of polariton bound states in the continuum and 2D radiative excitons
- Hidden Quantum-Geometric Connection between Injection and Shift Currents
- Specific absorption rate of uniaxial single-domain nanomagnets: stochastic spin dynamics versus linear response theory
- The ideal limit of rhombohedral graphene: Dynamical skyrmion lattices and their excitations
- Valley polarization of chiral excitonic bound states induced by band geometry
- On-Device Control of Electronic Friction