Can sunlight replace LEDs in vertical farms? A critical assessment of optical-fiber daylighting strategies

arXiv:2607.24385 · eess.SY, cs.SY · Submitted 2026-07-27 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Robotics Radio. Generated commentary on the latest robotics and control papers.

Rosa: We're looking at the paper: "Can sunlight replace LEDs in vertical farms? A critical assessment of optical-fiber daylighting strategies".

Dev: Here's the gist of the paper. Vertical farming is a promising approach for increasing food production in controlled environments while reducing land use, water consumption, and dependence on external climatic conditions.

Rosa: The optical-fiber system achieved an annual useful-PAR delivery efficiency of 19–27%, depending on fiber typology.

Dev: By distributing daylight across all rack shelves and limiting heat gains through a UV-IR filter, it reduced electricity consumption by 35–89%, compared with 12% for the light-pipe configuration.

Rosa: Hybrid LED–optical-fiber strategies avoided this penalty and achieved electricity savings of about 50%, with a minimum SEEC of 3.16 kWh kg-1.

Paper summary: Rosa: So to wrap up this assessment of "Can sunlight replace LEDs in vertical farms? A critical assessment of optical-fiber daylighting strategies," the main point is that while the technology shows significant potential for reducing electricity use in controlled environments, it's not ready for widespread use yet.

Dev: Right. The authors are really emphasizing that there's a gap between the energy savings they achieve with optical fiber and what’s required to make it economically practical right now. They suggest that high investment costs and uncertainties about how light actually distributes inside the farm still outweigh the benefits of those electricity savings.

Taro: From an autonomy standpoint, I think their concern about uncertainty in light distribution is key. If you can't predict exactly how much PAR you're getting across all your layers, that makes it hard to design a reliable real-time loop for the system.

Rosa: Exactly. And they also point out that the technology isn't fully mature yet. So, while we see great results in simulations and trials, there are still things missing in terms of how this system performs when you throw it out into the real world with all its unpredictable variables.

Dev: So the future development for this area, based on these findings from this paper, seems to be heavily focused on reducing those optical fiber costs first. That’s where they think the next big step needs to happen before we see widespread adoption of these systems.

Conclusion: Rosa: So we've looked at how optical fiber systems can bring sunlight inside vertical farms, and this paper is taking a really hard look at whether that actually works in the real world yet.

Dev: Yeah, it’s titled "Can sunlight replace LEDs in vertical farms? A critical assessment of optical-fiber daylighting strategies," and the authors are really zeroing in on the practical side of this whole idea.

Taro: It seems like they aren't just showing pretty diagrams; they’re digging into why it might fail when you take these systems out of a perfect lab setting.

Rosa: Right, because the big picture is that while we see some good energy savings in simulations, the paper makes it clear that high investment costs and uncertainty about how light actually gets spread around the farm are still major roadblocks.

Dev: Exactly, they’re saying you need to cut those fiber costs by about ninety percent just to make this economically sensible under normal operating conditions.

Taro: So it sounds like the current reality is that optical fiber daylighting isn't a mature or affordable solution for vertical farms right now, despite the potential energy gains.

Rosa: That’s the core message, and it highlights that we still have a lot of work to do before this kind of technology becomes a standard in controlled environments.

Department of Energy, Systems, Territory and Construction Engineering University of Pisa

eess.SY, cs.SY

Submitted: 2026-07-27

Updated: 2026-11-06

DOI: 10.1016/j.enconman.2026.122349

License: http://creativecommons.org/licenses/by-nc-nd/4.0/

Importance score: 79/100

The gist: Vertical farming is a promising approach for increasing food production in controlled environments while reducing land use, water consumption, and dependence on external climatic conditions.

Key concepts

Optical Fiber System
This system uses optical fibers to deliver natural sunlight into vertical farming structures. It aims to distribute daylight across all growing layers. Its efficiency depends on the specific type of fiber used and how the light is concentrated.
Light-Pipe Configuration
This is an alternative solar strategy compared to optical fibers. It has higher optical efficiency but offers less flexibility in integrating it within a vertical farm setup. It serves as a benchmark for comparison.
SEEC (Specific Energy Consumption)
This metric measures the energy used per kilogram of crop produced, accounting for both lighting and growing needs. Lower SEEC indicates better energy efficiency in the system.

Terminology

Summary

Vertical farming is a promising approach for increasing food production in controlled environments while reducing land use, water consumption, and dependence on external climatic conditions. p. 0

Where the paper says it

ceccanti@phd. Ceccanti) Abstract Vertical farming is a promising approach for increasing food production in controlled environments while reducing land use, water consumption, and dependence on external climatic conditions.

The optical-fiber system achieved an annual useful-PAR delivery efficiency of 19–27%, depending on fiber typology. p. 0
Where the paper says it

Five optical fiber typologies and three daylighting strategies were compared in terms of crop production, specific electrical energy consumption, and light cost, and benchmarked against light-pipe and rooftop photovoltaic solutions. The optical-fiber system achieved an annual useful-PAR delivery efficiency of 19–27%, depending on fiber typology.

By distributing daylight across all rack shelves and limiting heat gains through a UV-IR filter, it reduced electricity consumption by 35–89%, compared with 12% for the light-pipe configuration. p. 0
Where the paper says it

The optical-fiber system achieved an annual useful-PAR delivery efficiency of 19–27%, depending on fiber typology. By distributing daylight across all rack shelves and limiting heat gains through a UV-IR filter, it reduced electricity consumption by 35–89%, compared with 12% for the light-pipe configuration.

Hybrid LED–optical-fiber strategies avoided this penalty and achieved electricity savings of about 50%, with a minimum SEEC of 3. p. 0
Where the paper says it

81 kWh kg-1, but caused a 52% crop productivity reduction. Hybrid LED–optical-fiber strategies avoided this penalty and achieved electricity savings of about 50%, with a minimum SEEC of 3.

16 kWh kg-1. p. 0
Where the paper says it

The daylight-only strategy achieved the lowest SEEC, equal to 1. 81 kWh kg-1, but caused a 52% crop productivity reduction.

However, current optical fiber costs make the system economically unattractive, requiring an estimated capital cost reduction of about 90% to become competitive. p. 0
Where the paper says it

16 kWh kg-1. However, current optical fiber costs make the system economically unattractive, requiring an estimated capital cost reduction of about 90% to become competitive.

System Modeling and Setup

The assessment is carried out using the AGRI-Energy model developed in [14], which is adopted here as the reference framework for simulating the coupled agronomic and energy performance of the container farm. The chamber energy balance was modified, as shown in Eq. p. 7

Where the paper says it

By using this previously developed framework, the present study can evaluate how the integration of an optical fiber daylighting system affects environmental control requirements, energy use, and crop productivity. The chamber energy balance was modified, as shown in Eq.

1, to account for the integration of the optical fiber daylighting system. p. 7
Where the paper says it

The chamber energy balance was modified, as shown in Eq. 1, to account for the integration of the optical fiber daylighting system.

Lettuce was used as the reference crop, given its common application in vertical farming systems and its suitability for controlled-environment production. p. 7
Where the paper says it

The estimation of QOF is detailed in the next section, whereas the calculation of the remaining energy-balance terms is described in [14]. 𝑑௔௜௥𝑐௣ೌ೔ೝ𝑉௥௢௢௠ డ் డ௧ = 𝑄௘௡௩ + 𝑄௅ா஽ + 𝑄ைி − 𝑄௣௟௔௡௧ − 𝑄௘௩௔ + 𝑄௛/௖ − 𝑄஺ு௎ − 𝑄௛௨௠ (1) Lettuce was used as the reference crop, given its common application in vertical farming systems and its suitability for controlled-environment production.

The indoor environmental setpoints are selected according to the sensitivity analysis presented in [9], adopting the configuration associated with the lowest levelized cost of lettuce production. p. 8
Where the paper says it

Lettuce is considered as the reference crop and is grown at a planting density of 25 plants m-2, with harvesting assumed at an average fresh mass of 250 g per plant, consistently with the experimental data reported in [23]. The indoor environmental setpoints are selected according to the sensitivity analysis presented in [9], adopting the configuration associated with the lowest levelized cost of lettuce production.

Daylighting System Design

The main advantage of an optical fiber-based daylighting system is its ability to deliver natural light directly to selected growing zones, including individual cultivation layers in multilayer vertical farming structures. The proposed configuration couples the linear Fresnel lens with a roof-mounted linear concentrating unit, schematically shown in Figure 2. p. 9

Where the paper says it

Previous studies on daylighting and optical fiber systems have shown that solar concentrators can improve system performance by increasing the amount of daylight collected and transmitted indoors [25] [21]. In the present study, the optical fiber daylighting system is coupled with a roof-mounted linear concentrating unit, schematically shown in Figure 2.

The system performs tracking with respect to the solar altitude angle by rotating the whole lens–receiver assembly around a longitudinal shaft. p. 1
Where the paper says it

LP Light Pipe [−] dl Daylight LUE Light Use Efficiency [𝑔 𝜇𝑚𝑜𝑙ିଵ ] dm Dry Matter PAR Photosynthetic Active Radiation [𝜇𝑚𝑜𝑙 𝑚ିଶ 𝑠 ିଵ ] env Envelope PBT Payback Time [𝑦𝑒𝑎𝑟𝑠] eva Evaporation POF Plastic Optical Fiber [−] fm Fresh Matter PPE Photosynthetic Photon Efficiency [𝜇𝑚𝑜𝑙 𝐽 ିଵ ] H/C Heating & Cooling Systems PPF Photosynthetic Photon Flux [𝜇𝑚𝑜𝑙 𝑠 ିଵ ] hum Humidification System PPFD Photosynthetic Photon Flux Density [𝜇𝑚𝑜𝑙 𝑚ିଶ 𝑠 ିଵ ] In Inlet PV Photovoltaic [−] inv Inverter SEC Specific Energy Consumption [𝑘𝑊ℎ 𝑘𝑔ିଵ ] LED Lighting System SEEC Specific Electric Energy Consumption [𝑘𝑊ℎ 𝑘𝑔ିଵ ] OF Optical Fiber SLA Specific Leaf Area [𝑐𝑚ଶ 𝑔 ିଵ ] plant Single Lettuce Plant SOF Silica Optical Fiber [−] rad Radiative VF Vertical Farm [−] sol Solar Symbols T Temperature 𝑨 Area [𝑚ଶ ] tr Transmitted 𝒄𝒑 Specific Heat Capacity [𝐽 𝑘𝑔ିଵ 𝐾 ିଵ ] 𝒅 Density [𝑘𝑔 𝑚ଷ ] 𝑫𝑴 Dry Matter [𝑔 𝑚ିଶ ] 𝒇 Focal Length [𝑚𝑚] 𝑭𝑴 Fresh Matter [−] 𝑰 Solar Irradiation [−] 𝒌 Light Extinction Coefficient [−] 𝒏 Index of Refraction [−] NA Numerical Aperture [−] 𝑸 Thermal Power [𝑘𝑊] 𝑷 Electrical Power [𝑘𝑊] 𝑻 Temperature [°𝐶] 𝒕 Time [𝑠] 𝑽 Volume [𝑚ଷ ] 𝑾 Width [𝑚𝑚] 𝒁 Receiver Axial Displacement [𝑚𝑚] Greeks 𝜶 Altitude [𝑟𝑎𝑑] 𝜸 Azimuth Angle [𝑟𝑎𝑑] 𝜼 Efficiency [−] 𝝉 Optical Transmission [−] 𝜽 Incidence Angle [𝑟𝑎𝑑] 𝜈 Semi-angle of Fresnel Lens [𝑟𝑎𝑑] 𝜌 Optical Reflectance [−] 1. Introduction Vertical farming is a controlled crop production approach in which plants are grown in vertically stacked layers within highly managed indoor or semi-indoor environments.

Performance Comparison

The results were benchmarked against two alternative solar-based strategies: a light-pipe system, characterized by higher optical efficiency but lower integration flexibility, and a photovoltaic-based solution, characterized by lower solarto-useful-energy performance but higher technological maturity. The MAX strategy avoided productivity losses, whereas the MIN strategy substantially reduced the penalty observed in the NL case. p. 0

Where the paper says it

81 kWh kg-1, but caused a 52% crop productivity reduction. Hybrid LED–optical-fiber strategies avoided this penalty and achieved electricity savings of about 50%, with a minimum SEEC of 3.

The hybrid strategies reduced SEEC by approximately 35–58%, depending on fiber typology and integration approach. p. 0
Where the paper says it

The optical-fiber system achieved an annual useful-PAR delivery efficiency of 19–27%, depending on fiber typology. By distributing daylight across all rack shelves and limiting heat gains through a UV-IR filter, it reduced electricity consumption by 35–89%, compared with 12% for the light-pipe configuration.

p. 0
Where the paper says it

The optical-fiber system achieved an annual useful-PAR delivery efficiency of 19–27%, depending on fiber typology. By distributing daylight across all rack shelves and limiting heat gains through a UV-IR filter, it reduced electricity consumption by 35–89%, compared with 12% for the light-pipe configuration.

p. 0
Where the paper says it

The optical-fiber system achieved an annual useful-PAR delivery efficiency of 19–27%, depending on fiber typology. By distributing daylight across all rack shelves and limiting heat gains through a UV-IR filter, it reduced electricity consumption by 35–89%, compared with 12% for the light-pipe configuration.

p. 0
Where the paper says it

The optical-fiber system achieved an annual useful-PAR delivery efficiency of 19–27%, depending on fiber typology. By distributing daylight across all rack shelves and limiting heat gains through a UV-IR filter, it reduced electricity consumption by 35–89%, compared with 12% for the light-pipe configuration.

Economic Viability

The high specific cost of SOFs makes them unsuitable for the proposed system under the adopted economic assumptions. A reduction of about 90% in optical fiber capital costs would be required to make the system economically competitive under favorable operating conditions. p. 0

Where the paper says it

However, current optical fiber costs make the system economically unattractive, requiring an estimated capital cost reduction of about 90% to become competitive. Rooftop photovoltaics covered 22% of annual electricity demand and achieved an 11–12-year payback, making PV the most economically viable rooftop solar option under current market conditions.

The rooftop PV scenario highlights the economic gap between optical-fiber daylighting and mature solar technologies. p. 0
Where the paper says it

A validated transient vertical farm model was coupled with Tonatiuh ray-tracing simulations to assess a single-axis solar-tracked Fresnel concentration system. Five optical fiber typologies and three daylighting strategies were compared in terms of crop production, specific electrical energy consumption, and light cost, and benchmarked against light-pipe and rooftop photovoltaic solutions.

p. 0
Where the paper says it

A validated transient vertical farm model was coupled with Tonatiuh ray-tracing simulations to assess a single-axis solar-tracked Fresnel concentration system. Five optical fiber typologies and three daylighting strategies were compared in terms of crop production, specific electrical energy consumption, and light cost, and benchmarked against light-pipe and rooftop photovoltaic solutions.

Conclusions

Based on the findings of this work and on previous studies, daylighting for vertical farms cannot yet be considered a mature and economically feasible solution under current market conditions. High investment costs, uncertainties in light distribution within the farm, and limited technological maturity still offset the benefits associated with electricity savings. p. 5

Where the paper says it

First, most studies focus on optical performance, lighting energy savings, or specific technological configurations, while fewer works adopt an integrated techno-economic perspective in which the vertical farm is treated as a coupled agro-energy system. In such systems, the benefits of daylighting cannot be assessed solely in terms of reduced LED electricity consumption, but must also account for crop yield, daily light integral control, supplemental LED operation, HVAC and dehumidification loads, climatic variability, investment costs, and operational costs.

The rooftop PV scenario highlights the economic gap between optical-fiber daylighting and mature solar technologies. The results confirm that future developments should primarily focus on reducing optical-fiber costs. p. 5
Where the paper says it

First, most studies focus on optical performance, lighting energy savings, or specific technological configurations, while fewer works adopt an integrated techno-economic perspective in which the vertical farm is treated as a coupled agro-energy system. In such systems, the benefits of daylighting cannot be assessed solely in terms of reduced LED electricity consumption, but must also account for crop yield, daily light integral control, supplemental LED operation, HVAC and dehumidification loads, climatic variability, investment costs, and operational costs.

Pruning redundant reasoning tokens

The main limitation is associated with the non-PAR fraction of the solar spectrum, while the most relevant system-related losses are due to the concentration stage and mutual shading between adjacent concentrators. The overall light capture efficiency, defined as the fraction of total incident daylight effectively collected by the system, follows the trend of roof area use more closely than that of shading efficiency. p. 1

Where the paper says it

LP Light Pipe [−] dl Daylight LUE Light Use Efficiency [𝑔 𝜇𝑚𝑜𝑙ିଵ ] dm Dry Matter PAR Photosynthetic Active Radiation [𝜇𝑚𝑜𝑙 𝑚ିଶ 𝑠 ିଵ ] env Envelope PBT Payback Time [𝑦𝑒𝑎𝑟𝑠] eva Evaporation POF Plastic Optical Fiber [−] fm Fresh Matter PPE Photosynthetic Photon Efficiency [𝜇𝑚𝑜𝑙 𝐽 ିଵ ] H/C Heating & Cooling Systems PPF Photosynthetic Photon Flux [𝜇𝑚𝑜𝑙 𝑠 ିଵ ] hum Humidification System PPFD Photosynthetic Photon Flux Density [𝜇𝑚𝑜𝑙 𝑚ିଶ 𝑠 ିଵ ] In Inlet PV Photovoltaic [−] inv Inverter SEC Specific Energy Consumption [𝑘𝑊ℎ 𝑘𝑔ିଵ ] LED Lighting System SEEC Specific Electric Energy Consumption [𝑘𝑊ℎ 𝑘𝑔ିଵ ] OF Optical Fiber SLA Specific Leaf Area [𝑐𝑚ଶ 𝑔 ିଵ ] plant Single Lettuce Plant SOF Silica Optical Fiber [−] rad Radiative VF Vertical Farm [−] sol Solar Symbols T Temperature 𝑨 Area [𝑚ଶ ] tr Transmitted 𝒄𝒑 Specific Heat Capacity [𝐽 𝑘𝑔ିଵ 𝐾 ିଵ ] 𝒅 Density [𝑘𝑔 𝑚ଷ ] 𝑫𝑴 Dry Matter [𝑔 𝑚ିଶ ] 𝒇 Focal Length [𝑚𝑚] 𝑭𝑴 Fresh Matter [−] 𝑰 Solar Irradiation [−] 𝒌 Light Extinction Coefficient [−] 𝒏 Index of Refraction [−] NA Numerical Aperture [−] 𝑸 Thermal Power [𝑘𝑊] 𝑷 Electrical Power [𝑘𝑊] 𝑻 Temperature [°𝐶] 𝒕 Time [𝑠] 𝑽 Volume [𝑚ଷ ] 𝑾 Width [𝑚𝑚] 𝒁 Receiver Axial Displacement [𝑚𝑚] Greeks 𝜶 Altitude [𝑟𝑎𝑑] 𝜸 Azimuth Angle [𝑟𝑎𝑑] 𝜼 Efficiency [−] 𝝉 Optical Transmission [−] 𝜽 Incidence Angle [𝑟𝑎𝑑] 𝜈 Semi-angle of Fresnel Lens [𝑟𝑎𝑑] 𝜌 Optical Reflectance [−] 1. Introduction Vertical farming is a controlled crop production approach in which plants are grown in vertically stacked layers within highly managed indoor or semi-indoor environments.

How the training signal is built

The PPFD delivered to the crop varies significantly depending on the optical fiber typology and the adopted daylighting strategy. In winter, when daylight availability is lower, SOF-based configurations provide higher PPFD due to the greater efficiency of their optical transmission chain. p. 1

Where the paper says it

LP Light Pipe [−] dl Daylight LUE Light Use Efficiency [𝑔 𝜇𝑚𝑜𝑙ିଵ ] dm Dry Matter PAR Photosynthetic Active Radiation [𝜇𝑚𝑜𝑙 𝑚ିଶ 𝑠 ିଵ ] env Envelope PBT Payback Time [𝑦𝑒𝑎𝑟𝑠] eva Evaporation POF Plastic Optical Fiber [−] fm Fresh Matter PPE Photosynthetic Photon Efficiency [𝜇𝑚𝑜𝑙 𝐽 ିଵ ] H/C Heating & Cooling Systems PPF Photosynthetic Photon Flux [𝜇𝑚𝑜𝑙 𝑠 ିଵ ] hum Humidification System PPFD Photosynthetic Photon Flux Density [𝜇𝑚𝑜𝑙 𝑚ିଶ 𝑠 ିଵ ] In Inlet PV Photovoltaic [−] inv Inverter SEC Specific Energy Consumption [𝑘𝑊ℎ 𝑘𝑔ିଵ ] LED Lighting System SEEC Specific Electric Energy Consumption [𝑘𝑊ℎ 𝑘𝑔ିଵ ] OF Optical Fiber SLA Specific Leaf Area [𝑐𝑚ଶ 𝑔 ିଵ ] plant Single Lettuce Plant SOF Silica Optical Fiber [−] rad Radiative VF Vertical Farm [−] sol Solar Symbols T Temperature 𝑨 Area [𝑚ଶ ] tr Transmitted 𝒄𝒑 Specific Heat Capacity [𝐽 𝑘𝑔ିଵ 𝐾 ିଵ ] 𝒅 Density [𝑘𝑔 𝑚ଷ ] 𝑫𝑴 Dry Matter [𝑔 𝑚ିଶ ] 𝒇 Focal Length [𝑚𝑚] 𝑭𝑴 Fresh Matter [−] 𝑰 Solar Irradiation [−] 𝒌 Light Extinction Coefficient [−] 𝒏 Index of Refraction [−] NA Numerical Aperture [−] 𝑸 Thermal Power [𝑘𝑊] 𝑷 Electrical Power [𝑘𝑊] 𝑻 Temperature [°𝐶] 𝒕 Time [𝑠] 𝑽 Volume [𝑚ଷ ] 𝑾 Width [𝑚𝑚] 𝒁 Receiver Axial Displacement [𝑚𝑚] Greeks 𝜶 Altitude [𝑟𝑎𝑑] 𝜸 Azimuth Angle [𝑟𝑎𝑑] 𝜼 Efficiency [−] 𝝉 Optical Transmission [−] 𝜽 Incidence Angle [𝑟𝑎𝑑] 𝜈 Semi-angle of Fresnel Lens [𝑟𝑎𝑑] 𝜌 Optical Reflectance [−] 1. Introduction Vertical farming is a controlled crop production approach in which plants are grown in vertically stacked layers within highly managed indoor or semi-indoor environments.

Where the gains come from

The NL strategy achieved the highest electricity saving, with an average SEEC of 1.81 kWh kg-1. p. 0

Where the paper says it

The daylight-only strategy achieved the lowest SEEC, equal to 1. 81 kWh kg-1, but caused a 52% crop productivity reduction.

p. 0
Where the paper says it

The daylight-only strategy achieved the lowest SEEC, equal to 1. 81 kWh kg-1, but caused a 52% crop productivity reduction.

The MAX strategy provided the best agro-energy compromise, with no productivity loss and a minimum SEEC of 3. p. 0
Where the paper says it

81 kWh kg-1, but caused a 52% crop productivity reduction. Hybrid LED–optical-fiber strategies avoided this penalty and achieved electricity savings of about 50%, with a minimum SEEC of 3.

16 kWh kg-1 for the highefficiency SOF configuration. p. 1
Where the paper says it

LP Light Pipe [−] dl Daylight LUE Light Use Efficiency [𝑔 𝜇𝑚𝑜𝑙ିଵ ] dm Dry Matter PAR Photosynthetic Active Radiation [𝜇𝑚𝑜𝑙 𝑚ିଶ 𝑠 ିଵ ] env Envelope PBT Payback Time [𝑦𝑒𝑎𝑟𝑠] eva Evaporation POF Plastic Optical Fiber [−] fm Fresh Matter PPE Photosynthetic Photon Efficiency [𝜇𝑚𝑜𝑙 𝐽 ିଵ ] H/C Heating & Cooling Systems PPF Photosynthetic Photon Flux [𝜇𝑚𝑜𝑙 𝑠 ିଵ ] hum Humidification System PPFD Photosynthetic Photon Flux Density [𝜇𝑚𝑜𝑙 𝑚ିଶ 𝑠 ିଵ ] In Inlet PV Photovoltaic [−] inv Inverter SEC Specific Energy Consumption [𝑘𝑊ℎ 𝑘𝑔ିଵ ] LED Lighting System SEEC Specific Electric Energy Consumption [𝑘𝑊ℎ 𝑘𝑔ିଵ ] OF Optical Fiber SLA Specific Leaf Area [𝑐𝑚ଶ 𝑔 ିଵ ] plant Single Lettuce Plant SOF Silica Optical Fiber [−] rad Radiative VF Vertical Farm [−] sol Solar Symbols T Temperature 𝑨 Area [𝑚ଶ ] tr Transmitted 𝒄𝒑 Specific Heat Capacity [𝐽 𝑘𝑔ିଵ 𝐾 ିଵ ] 𝒅 Density [𝑘𝑔 𝑚ଷ ] 𝑫𝑴 Dry Matter [𝑔 𝑚ିଶ ] 𝒇 Focal Length [𝑚𝑚] 𝑭𝑴 Fresh Matter [−] 𝑰 Solar Irradiation [−] 𝒌 Light Extinction Coefficient [−] 𝒏 Index of Refraction [−] NA Numerical Aperture [−] 𝑸 Thermal Power [𝑘𝑊] 𝑷 Electrical Power [𝑘𝑊] 𝑻 Temperature [°𝐶] 𝒕 Time [𝑠] 𝑽 Volume [𝑚ଷ ] 𝑾 Width [𝑚𝑚] 𝒁 Receiver Axial Displacement [𝑚𝑚] Greeks 𝜶 Altitude [𝑟𝑎𝑑] 𝜸 Azimuth Angle [𝑟𝑎𝑑] 𝜼 Efficiency [−] 𝝉 Optical Transmission [−] 𝜽 Incidence Angle [𝑟𝑎𝑑] 𝜈 Semi-angle of Fresnel Lens [𝑟𝑎𝑑] 𝜌 Optical Reflectance [−] 1. Introduction Vertical farming is a controlled crop production approach in which plants are grown in vertically stacked layers within highly managed indoor or semi-indoor environments.

p. 1
Where the paper says it

LP Light Pipe [−] dl Daylight LUE Light Use Efficiency [𝑔 𝜇𝑚𝑜𝑙ିଵ ] dm Dry Matter PAR Photosynthetic Active Radiation [𝜇𝑚𝑜𝑙 𝑚ିଶ 𝑠 ିଵ ] env Envelope PBT Payback Time [𝑦𝑒𝑎𝑟𝑠] eva Evaporation POF Plastic Optical Fiber [−] fm Fresh Matter PPE Photosynthetic Photon Efficiency [𝜇𝑚𝑜𝑙 𝐽 ିଵ ] H/C Heating & Cooling Systems PPF Photosynthetic Photon Flux [𝜇𝑚𝑜𝑙 𝑠 ିଵ ] hum Humidification System PPFD Photosynthetic Photon Flux Density [𝜇𝑚𝑜𝑙 𝑚ିଶ 𝑠 ିଵ ] In Inlet PV Photovoltaic [−] inv Inverter SEC Specific Energy Consumption [𝑘𝑊ℎ 𝑘𝑔ିଵ ] LED Lighting System SEEC Specific Electric Energy Consumption [𝑘𝑊ℎ 𝑘𝑔ିଵ ] OF Optical Fiber SLA Specific Leaf Area [𝑐𝑚ଶ 𝑔 ିଵ ] plant Single Lettuce Plant SOF Silica Optical Fiber [−] rad Radiative VF Vertical Farm [−] sol Solar Symbols T Temperature 𝑨 Area [𝑚ଶ ] tr Transmitted 𝒄𝒑 Specific Heat Capacity [𝐽 𝑘𝑔ିଵ 𝐾 ିଵ ] 𝒅 Density [𝑘𝑔 𝑚ଷ ] 𝑫𝑴 Dry Matter [𝑔 𝑚ିଶ ] 𝒇 Focal Length [𝑚𝑚] 𝑭𝑴 Fresh Matter [−] 𝑰 Solar Irradiation [−] 𝒌 Light Extinction Coefficient [−] 𝒏 Index of Refraction [−] NA Numerical Aperture [−] 𝑸 Thermal Power [𝑘𝑊] 𝑷 Electrical Power [𝑘𝑊] 𝑻 Temperature [°𝐶] 𝒕 Time [𝑠] 𝑽 Volume [𝑚ଷ ] 𝑾 Width [𝑚𝑚] 𝒁 Receiver Axial Displacement [𝑚𝑚] Greeks 𝜶 Altitude [𝑟𝑎𝑑] 𝜸 Azimuth Angle [𝑟𝑎𝑑] 𝜼 Efficiency [−] 𝝉 Optical Transmission [−] 𝜽 Incidence Angle [𝑟𝑎𝑑] 𝜈 Semi-angle of Fresnel Lens [𝑟𝑎𝑑] 𝜌 Optical Reflectance [−] 1. Introduction Vertical farming is a controlled crop production approach in which plants are grown in vertically stacked layers within highly managed indoor or semi-indoor environments.

The MIN strategy combines lower energy-saving potential with a productivity penalty, making it less attractive from an agroenergy perspective. p. 2
Where the paper says it

Vertical farming offers several potential advantages in terms of land productivity, resource-use efficiency, and production stability. By stacking multiple cultivation layers within the same footprint, these systems can substantially increase land-use efficiency, making crop production feasible in dense urban areas or regions where arable land is limited [4].

The NL strategy, where no LED supplementation is used, results in the lowest electricity demand among the investigated scenarios. The NL strategy reaches a SEEC of 1. p. 0

Where the paper says it

By distributing daylight across all rack shelves and limiting heat gains through a UV-IR filter, it reduced electricity consumption by 35–89%, compared with 12% for the light-pipe configuration. The daylight-only strategy achieved the lowest SEEC, equal to 1.

81 kWh kg-1, corresponding to a 76% reduction compared with the benchmark and a 72% reduction compared with the light-pipe-based scenario. p. 6
Where the paper says it

The different configurations are compared in terms of specific energy consumption and energy-related costs. Finally, the results are benchmarked against two alternative solarbased strategies: a previously investigated light-pipe system [19] and a photovoltaic-based solution.

The hybrid MAX strategy avoids productivity losses, whereas the MIN strategy substantially reduced the penalty observed in the NL case. The hybrid strategies reduced SEEC by approximately 35–58%, depending on fiber typology and integration approach.

The MAX strategy provided the best agro-energy compromise, with no productivity loss and a minimum SEEC of 3.16 kWh kg-1 for the highefficiency SOF configuration. The hybrid strategies reduced SEEC by approximately 35–58%, depending on fiber typology and integration approach.

When LED supplementation is included under the MAX strategy, the electricity demand follows the availability of daylight delivered by the optical-fiber system. During daylighting hours, the maximum load reaches 6 kW in winter and 4 kW in summer for POF1, 2 kW in winter and 4 kW in summer for POF2/POF3, and 6 kW in winter and 5 kW in summer for SOF1/SOF2.

The MIN strategy provides lower electricity savings than the MAX strategy, since the number of installed bundles is reduced and LED supplementation is required for a larger portion of the photoperiod. The MIN configuration reduces the payback time by 9–25% compared to the corresponding MAX configuration. p. 1

Where the paper says it

LP Light Pipe [−] dl Daylight LUE Light Use Efficiency [𝑔 𝜇𝑚𝑜𝑙ିଵ ] dm Dry Matter PAR Photosynthetic Active Radiation [𝜇𝑚𝑜𝑙 𝑚ିଶ 𝑠 ିଵ ] env Envelope PBT Payback Time [𝑦𝑒𝑎𝑟𝑠] eva Evaporation POF Plastic Optical Fiber [−] fm Fresh Matter PPE Photosynthetic Photon Efficiency [𝜇𝑚𝑜𝑙 𝐽 ିଵ ] H/C Heating & Cooling Systems PPF Photosynthetic Photon Flux [𝜇𝑚𝑜𝑙 𝑠 ିଵ ] hum Humidification System PPFD Photosynthetic Photon Flux Density [𝜇𝑚𝑜𝑙 𝑚ିଶ 𝑠 ିଵ ] In Inlet PV Photovoltaic [−] inv Inverter SEC Specific Energy Consumption [𝑘𝑊ℎ 𝑘𝑔ିଵ ] LED Lighting System SEEC Specific Electric Energy Consumption [𝑘𝑊ℎ 𝑘𝑔ିଵ ] OF Optical Fiber SLA Specific Leaf Area [𝑐𝑚ଶ 𝑔 ିଵ ] plant Single Lettuce Plant SOF Silica Optical Fiber [−] rad Radiative VF Vertical Farm [−] sol Solar Symbols T Temperature 𝑨 Area [𝑚ଶ ] tr Transmitted 𝒄𝒑 Specific Heat Capacity [𝐽 𝑘𝑔ିଵ 𝐾 ିଵ ] 𝒅 Density [𝑘𝑔 𝑚ଷ ] 𝑫𝑴 Dry Matter [𝑔 𝑚ିଶ ] 𝒇 Focal Length [𝑚𝑚] 𝑭𝑴 Fresh Matter [−] 𝑰 Solar Irradiation [−] 𝒌 Light Extinction Coefficient [−] 𝒏 Index of Refraction [−] NA Numerical Aperture [−] 𝑸 Thermal Power [𝑘𝑊] 𝑷 Electrical Power [𝑘𝑊] 𝑻 Temperature [°𝐶] 𝒕 Time [𝑠] 𝑽 Volume [𝑚ଷ ] 𝑾 Width [𝑚𝑚] 𝒁 Receiver Axial Displacement [𝑚𝑚] Greeks 𝜶 Altitude [𝑟𝑎𝑑] 𝜸 Azimuth Angle [𝑟𝑎𝑑] 𝜼 Efficiency [−] 𝝉 Optical Transmission [−] 𝜽 Incidence Angle [𝑟𝑎𝑑] 𝜈 Semi-angle of Fresnel Lens [𝑟𝑎𝑑] 𝜌 Optical Reflectance [−] 1. Introduction Vertical farming is a controlled crop production approach in which plants are grown in vertically stacked layers within highly managed indoor or semi-indoor environments.

The NL strategy achieves the highest electricity saving, with an average SEEC of 1.81 kWh kg-1. The hybrid strategies reduced SEEC by approximately 35–58%, depending on fiber typology and integration approach.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Improve vertical farm energy management by implementing hybrid LED-optical fiber strategies that avoid productivity penalties while achieving electricity savings of about 50% with a minimum specific energy consumption of 3.16 kWh kg-1.

  2. Develop an AI system capable of optimizing optical fiber daylighting configurations based on ray-tracing simulations to assess the performance of five optical fiber typologies and three integration strategies for delivering natural light into a small-scale vertical farm.

  3. Create an agro-energy integration framework that couples ray-tracing results with a validated vertical farming model to evaluate crop light availability, LED supplementation, agronomic performance, and specific energy consumption in real-time.

  4. Implement a techno-economic benchmarking tool that compares fiber-only and hybrid fiber–LED strategies against light-pipe and photovoltaic alternatives to identify the economic trade-offs between daylighting and PV solutions for vertical farming.

  5. Design an AI system that predicts the optimal collector spacing for linear Fresnel concentrators based on solar position, mutual shading, roof area use, and geometrical constraints to maximize annual collected direct solar energy.

  6. Enhance the agricultural standpoint of vertical farms by using AI to analyze how different optical fiber typologies and daylighting strategies affect PPFD delivered to the crop under various seasonal conditions.

  7. Develop an AI system that predicts the daily electricity load profiles of a vertical farm under different daylighting strategies, allowing for proactive management of lighting and cooling demands to minimize energy use.

  8. Create a predictive model for specific energy consumption (SEEC) that accounts for both lighting reduction and potential increases in cooling demand due to daylight introduction, providing accurate energy performance forecasts.

  9. Build an economic assessment tool that predicts the payback time of optical fiber systems under varying electricity prices and CAPEX reductions to identify the most favorable configuration, such as POF3 under a MIN strategy.

  10. Develop a comparative analysis system that assesses whether optical-fiber daylighting can offer greater agro-energy and technoeconomic advantages than photovoltaic-based solutions for vertical farming based on climatic and technical conditions.

Abstract

Vertical farming is a promising approach for increasing food production in controlled environments while reducing land use, water consumption, and dependence on external climatic conditions. However, its large electricity demand, mainly driven by artificial lighting, still limits its energetic and economic sustainability. This study evaluates the techno-economic potential of an optical-fiber daylighting system designed to transport concentrated sunlight directly to the crop growing zones of a vertical farm. A validated transient vertical farm model was coupled with Tonatiuh ray-tracing simulations to assess a single-axis solar-tracked Fresnel concentration system. Five optical fiber typologies and three daylighting strategies were compared in terms of crop production, specific electrical energy consumption, and light cost, and benchmarked against light-pipe and rooftop photovoltaic solutions. The optical-fiber system achieved an annual useful-PAR delivery efficiency of 19-27%, depending on fiber typology. By distributing daylight across all rack shelves and limiting heat gains through a UV-IR filter, it reduced electricity consumption by 35-89%, compared with 12% for the light-pipe configuration. The daylight-only strategy achieved the lowest SEEC, equal to 1.81 kWh kg-1, but caused a 52% crop productivity reduction. Hybrid LED-optical-fiber strategies avoided this penalty and achieved electricity savings of about 50%, with a minimum SEEC of 3.16 kWh kg-1. However, current optical fiber costs make the system economically unattractive, requiring an estimated capital cost reduction of about 90% to become competitive. Rooftop photovoltaics covered 22% of annual electricity demand and achieved an 11-12-year payback, making PV the most economically viable rooftop solar option under current market conditions.

Related papers