Inference Limits of Routine Cement Characterization for CEM I Performance: Evidence From a Multi-Producer Dataset
Listen
Radio episode about this paper
Transcript
Introduction to the show: ident: Condensed Matter. The day in condensed matter: materials, phases and the measurements under them.
Kai: I'm Kai.
Mira: And I'm Mira, here with Lev.
Kai: We're looking at the paper: "Inference Limits of Routine Cement Characterization for CEM I Performance".
Mira: Here's the gist of the paper. Routine cement performance characterization provides continuous quality control data, but its information content for performance inference and transferability across independent producers remains uncertain The analysis focuses on CEM I and combines oxide chemistry, Blaine fineness, particle-size distribution descriptors, physical properties, and derived Bogue and equivalent-alkali descriptors with machine learning attribution and producer-transfer tests Routine CEM I characterization therefore supports useful performance inference across producers, while exposing producer-specific variation whose recovery may require additional speciation Information Content of Descriptors The study analyzed 476 cement records from 23 European producers over 27 years to determine what can be inferred from routine measurements For CEM I, fineness is the strongest descriptor family for strength class and water demand, but oxide chemistry contributes a comparable signal when evaluated jointly Blaine and compact particle-size distribution representations are largely interchangeable within the descriptor space, indicating that the dominant recoverable fineness information is captured by routine measurements Equivalent alkali shows a consistent negative association with 28-day strength, through K2O in this dataset Strength class and water demand can be recovered from routine cement characterization data How the training signal is built The primary performance-inference analyses were carried out on the CEM I subset, defining the modeling domain before feature attribution and prediction are evaluated Classification models predict discrete labels, such as the N/R early-strength designation and the 28-day strength class (32.5, 42.5, 52.5), whereas regression models predict continuous quantities like water demand and 28-day compressive strength Linear models express 28-day compressive strength y as an additive combination of the input descriptors, meaning each descriptor contributes independently to the prediction as follows yˆ(x) = w⊤x + b Tree ensembles test whether non-linear interactions among the routine descriptors provide additional explanatory power Where the gains come from The results show that chemistry and fineness contain substantial recoverable performance information that transfers across independent producers, while also exposing a practical inference boundary Strength class and water demand are suitable analytical proxies for interrogating what routine cement data encodes LightGBM with SHAP TreeExplainer was applied to two secondary targets, strength class (ordinal) and water demand (continuous) before the primary 28-day regression The leading oxide contribution across both SHAP studies is the lightGBM
20: with SHAP TreeExplainer Inference Limits of Routine Characterization The N/R early-strength designation provides a clear limit, in which it is recoverable only as a population-level tendency, not as a physically separable class because routine descriptors do not uniquely resolve kinetic routes influenced by other factors such as grinding, sulfate–alkali chemistry, phase assemblage, and process history The residual variance unexplained by any combination of chemistry, fineness, and producer identity is consistent with physicochemical variables that routine measurements do not directly resolve This residual gap marks the practical inference limit of the present descriptor space and motivates the inclusion of sulfate speciation, phase-resolved mineralogy, thermal history, grinding practice, and other process descriptors The producer-holdout tests show that pooled absolute errors in this dataset remain comparable as producer eligibility broadens Producer-Transfer Robustness The complementary fully producer-transfer evaluation holds out an entire producer from training and evaluates transfer onto that producer, thereby measuring how well learned chemistry-to-performance relationships generalize when the target producer is unseen At n ≥ 5, fixed-OLS pooled R2 values of 0.48–0.52 and MAE values of 2.94 MPa to 3.20 MPa are obtained across 11 producers and 164 held-out samples The absolute errors remain comparable when producers with fewer samples are included, while results for individual producers remain more variable The detailed results show no consistent benefit from adding the compact PSD subset or using more complex models; Bogue-only OLS or ENET gives the strongest result for each producer This indicates that routine characterization supports useful crossproducer strength inference for this dataset, but it does not fully encode producer-specific process effects The residual gap marks the practical inference limit of the present descriptor space and motivates the inclusion of sulfate speciation, phase-resolved mineralogy, thermal history, grinding practice, and other process descriptors The boundary is therefore conditional: chemistry and fineness carry the dominant recoverable signal, while producer identity adds a small residual term only after those descriptors are present The conclusion that the dominant recoverable fineness signal is represented by simple routine descriptors is therefore not sensitive to the selected fineness encoding The overall absolute errors remain comparable when producers with fewer samples are included, while results for individual producers remain more variable Across a 27-year cement dataset from 23 European producers and 476 samples, routine CEM I descriptors contain substantial recoverable and transferable information for quantifying variations in 28-day compressive strength Cement fineness, encoded either through Blaine or through a small PSD percentile subset, is the strongest single descriptor class, with the two representations largely interchangeable in within-distribution performance Oxide chemistry contributes a comparable signal at the group level Strength class and water demand are recoverable at practically useful accuracy Among individual chemical descriptors, K2O and the derived equivalent alkali (Na2Oeq) show the most consistent negative association with 28-day strength across correlation and regression analyses The N/R early-strength designation provides a clear limit, in which it is recoverable only as a population-level tendency, not as a physically separable class because routine descriptors do not uniquely resolve kinetic routes influenced by other factors such as grinding, sulfate–alkali chemistry, phase assemblage, and process history Thus, routine characterization supports useful crossproducer strength inference for this dataset, but it does not fully encode producer-specific process effects The residual gap marks the practical inference limit of the present descriptor space and motivates the inclusion of sulfate speciation, phase-resolved mineralogy, thermal history, grinding practice, and other process descriptors The dataset is available at https://doi.org/10.5281/zenodo.21389548 Scripts are available at https://doi.org/zenodo.21390858 The anonymized cement dataset supporting the findings of this study, together with a data dictionary describing the variables and units relevant to processing information is available in Zenodo Dataset: https://doi.org/zenodo.21389548 Scripts: https://doi.org/zenodo.21390858 The smaller comparative dataset used is available upon request The supplementary dataset was the result of a cooperational project funded by the German Federal Ministry for Economic Affairs and Energy (BMWK) under the Central Innovation Programme for SMEs (ZIM), Project No.
Kai: KK50086081E3 The authors gratefully acknowledge Sonocrete GmbH for providing anonymized data that contributed to this research The declaration of competing interests states that the authors have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper The study is available on arXiv as 2607.22512 Page 1 --- Machine Learning Inference Limits of Routine Cement Characterization for CEM I Performance: Evidence From a Multi-Producer Dataset Routine cement performance characterization provides continuous quality control data, but its information content for performance inference and transferability across independent producers remains uncertain This study analyzes 476 cement records from 23 European producers, collected in one laboratory over 27 years to determine what can be inferred from routine measurements The analysis focuses on CEM I and combines oxide chemistry, Blaine fineness, particle-size distribution descriptors, physical properties, derived Bogue and equivalent-alkali descriptors with machine learning attribution and producer-transfer tests For CEM I, fineness is the strongest descriptor family for strength class and water demand, but oxide chemistry contributes a comparable signal when evaluated jointly Blaine and compact particle-size distribution representations are largely interchangeable within the descriptor space, indicating that the dominant recoverable fineness information is captured by routine measurements Equivalent alkali shows a consistent negative association with 28-day strength, through K2O in this dataset Strength class and water demand can be recovered from routine cement characterization data The early-strength designation is recovered only as a population-level tendency, not a physically separable class, because earlystrength development can arise from combinations of fineness, sulfate–alkali chemistry, phase assemblage, and plant practice Producer-holdout tests show that absolute prediction errors remain comparable across the heldout producers in this dataset, whereas recovery of within-producer strength variation is producer-dependent Routine CEM I characterization therefore supports useful performance inference across producers, while exposing producer-specific variation whose recovery may require additional speciation Page 2 --- Cement compressive strength depends jointly on composition and fineness
2: The present investigation uses explainable machine learning to probe the information content of routine cement characterization data, to uncover which chemistry and fineness descriptors support 28-day strength inference Within a single plant, chemistry and process variables are correlated in fixed plant-specific ways Evaluation across independent producers is needed to test how much of that signal remains stable outside a single plant envelope The investigation at hand therefore asks what information regarding CEM I performance is recoverable from routine cement characterization, where inference fails, and how well that inference transfers across independent producers Page 3 --- Cement compressive strength depends jointly on composition and fineness
2: Tsivilis and Parissakis
3: expressed this dependency as an empirical predictive relationship Industrial surveys also confirm that PSD and Blaine contribute beyond bulk chemistry alone Abdul et al.
5: document substantial microstructural and chemical variability across industrial clinkers Andrade Neto et al.
6: further show, based on 40 industrial clinkers, that reactivity and strength reflect coupled variation in mineralogy, sulfate-alkali ratio, crystal size, fineness across plants What remains limited is how much downstream performance is recoverable from routine measurements across independent producers within a common analytical framework In such settings, strong performance within a restricted data domain does not necessarily imply robust transfer across shifted material populations
7: Page 4 --- Recent reviews of machine learning in cement and concrete have mainly framed strength and related material properties as prediction targets or calorimetric descriptors used to improve predictive accuracy The present investigation uses related data-driven tools to quantify how much downstream mechanical performance is recoverable from routine cement characterization data, and how well does predictability transfer across independent producers Within a single plant, chemistry and process variables are correlated in fixed plant-specific ways A model trained on such data may therefore capture local covariation together with genuine material relationships Evaluation across independent producers is needed to test how much of that signal remains stable outside a single plant envelope More reliable cross-producer inference could support preliminary cement screening based on predicted performance, reducing dependence on long-duration testing where appropriate Page 5 --- The investigation at hand therefore asks what information regarding CEM I performance is recoverable from routine cement characterization, where inference fails, and how well that inference transfers across independent producers We use explainable machine learning models as quantitative probes of routine quality control descriptors, rather than as prediction tools alone The analysis tests how much 28-day strength, strength class, and water demand can be inferred from bulk chemistry and fineness; whether Blaine and compact PSD descriptors provide distinct or redundant fineness information Page 6 --- The results show that chemistry and fineness contain substantial recoverable performance information that transfers across independent producers, while also exposing a practical inference boundary Producertransfer tests and the limited separability of the N/R early-strength designation indicate that routine cement characterization data do not fully resolve producer-specific variation, plant-specific process history, sulfate speciation, phase assemblage, or early hydration routes Page 7 --- The investigation at hand therefore asks what information regarding CEM I performance is recoverable from routine cement characterization, where inference fails, and how well that inference transfers across independent producers We use explainable machine learning models as quantitative probes of routine quality control descriptors, rather than as prediction tools alone The analysis tests how much 28-day strength, strength class, and water demand can be inferred from bulk chemistry and fineness; whether Blaine and compact PSD descriptors provide distinct or redundant fineness information Page 8 --- The results show that chemistry and fineness contain substantial recoverable performance information that transfers across independent producers, while also exposing a practical inference boundary Producertransfer tests and the limited separability of the N/R early-strength designation indicate that routine cement characterization data do not fully resolve producer-specific variation, plant-specific process history, sulfate speciation, phase assemblage, or early hydration routes Page 9 --- The investigation at hand therefore asks what information regarding CEM I performance is recoverable from routine cement characterization, where inference fails, and how well that inference transfers across independent producers We use explainable machine learning models as quantitative probes of routine quality control descriptors, rather than as prediction tools alone The analysis tests how much 28-day strength, strength class, and water demand can be inferred from bulk chemistry and fineness; whether Blaine and compact PSD descriptors provide distinct or redundant fineness information Page 10 --- The results show that chemistry and fineness contain substantial recoverable performance information that transfers across independent producers, while also exposing a practical inference boundary Producertransfer tests and the limited separability of the N/R early-strength designation indicate that routine cement characterization data do not fully resolve producer-specific variation, plant-specific process history, sulfate speciation, phase assemblage, or early hydration routes Page 11 --- The analyses above establish how much information intrinsic chemistry and fineness contribute in isolation Producer identity alone achieves R2 = 0.05 under both OLS and XGB When producer indicators are appended to Oxides+PSD, OLS improves from R2 = 0.63 to 0.70 and MAE decreases from 2.80 MPa to 2.
Paper summary: Kai: So we're wrapping up with the conclusion of this paper, "Inference Limits of Routine Cement Characterization for CEM I Performance: Evidence From a Multi-Producer Dataset." The study essentially confirms that routine CEM I descriptors provide substantial and transferable information for quantifying variations in twenty-eight-day compressive strength <ref:2607.22512#pg1>.
Mira: They point out that cement fineness, whether encoded through Blaine or a small particle size distribution percentile subset, is the strongest single descriptor family for predicting strength class and water demand.
Lev: Oxide chemistry also contributes a comparable signal at the group level when you evaluate it alongside fineness, and equivalent alkali shows its consistent negative association with twenty-eight-day strength through K2O in this dataset <ref:2607.22512#pg1>.
Kai: The key limitation they highlight is that routine characterization data does not fully resolve producer-specific variation, plant-specific process history, sulfate speciation, phase assemblage, or early hydration routes.
Mira: So the inference limit is set by the residual gap left unexplained by chemistry and fineness alone. This motivates looking at more complex descriptors like sulfate speciation and phase-resolved mineralogy next.
Lev: And producer transfer tests confirm that routine characterization supports useful cross-producer strength inference, but it does not fully encode producer-specific process effects, which is a key takeaway for engineers building real hardware.
Kai: So for the listener, the implication is that you can use routine data to get a decent estimate of strength variations between producers, but you'll need more than just that data to nail down why one plant performs better than another.
Conclusion: Kai: So we're wrapping up this look at routine cement characterization data, focusing on CEM I performance across different producers.
Mira: The title itself is pretty clear, right? It’s all about where you can actually infer something useful from those standard quality control measurements.
Lev: It seems like the authors are really pushing the boundaries of what these routine measurements can tell us about twenty-eight-day strength.
Kai: Exactly. They look at a big dataset from twenty-three European producers over twenty-seven years to see what they can actually pull out of Blaine fineness and oxide chemistry.
Mira: What’s interesting is that while these routine measurements give you a usable estimate for strength class and water demand, there’s a clear limit to what they can resolve.
Lev: Right. They found that the N/R early-strength designation only works as a population trend, not as something you can physically separate on your own.
Kai: It seems like the main message is that routine characterization supports cross-producer strength inference, but it doesn't capture every little thing happening at each plant.
Mira: The gap they find—the residual variance—that's where the next big piece of information lies. It points toward things like sulfate speciation and phase assemblage.
Lev: So, the implication is that if you only use routine measurements, you get a general idea of how strong cement might be across different factories, but you’re missing the specific process details that make one plant better than another.
Kai: That means for anyone trying to build something real in concrete, relying just on routine data isn't enough to fully explain all the performance differences.
Data Science in Civil Engineering, Bauhaus University Weimar · Institute for Building Materials, Bauhaus University Weimar
cond-mat.mtrl-sci
Submitted: 2026-07-24
Updated: 2026-11-05
Comments: 17 pages, 6 figures, 12 tables
License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/
Importance score: 81/100
The gist: Routine cement performance characterization provides continuous quality control data, but its information content for performance inference and transferability across independent producers remains…
Key concepts
- CEM I Descriptors
- These are the routine measurements taken on CEM I cement records, including oxide chemistry (like K2O), Blaine fineness, and particle-size distribution. The study tests which of these standard measurements have the most predictive power for cement performance metrics like strength class and water demand.
- Performance Inference
- This is the ability to use routine quality control data (like a cement's chemical makeup) to estimate its actual physical performance, such as how strong it will be 28 days later. The research shows that chemistry and fineness are good at this, but other factors limit how accurately this inference can be made.
- Producer-Transfer Robustness
- This tests whether the relationships learned from one producer's data still work when applied to a completely different producer. The results show that while general performance trends transfer well across producers, routine data doesn't fully capture unique process effects specific to each individual plant.
- Inference Limits
- This refers to the boundary where routine measurements stop being useful for making accurate predictions. The study identifies this limit as the inability of these measurements alone to resolve complex factors like sulfate chemistry or grinding practices, which require more detailed testing.
Terminology
Summary
Routine cement performance characterization provides continuous quality control data, but its information content for performance inference and transferability across independent producers remains uncertain The analysis focuses on CEM I and combines oxide chemistry, Blaine fineness, particle-size distribution descriptors, physical properties, and derived Bogue and equivalent-alkali descriptors with machine learning attribution and producer-transfer tests Routine CEM I characterization therefore supports useful performance inference across producers, while exposing producer-specific variation whose recovery may require additional speciation
Information Content of Descriptors
The study analyzed 476 cement records from 23 European producers over 27 years to determine what can be inferred from routine measurements For CEM I, fineness is the strongest descriptor family for strength class and water demand, but oxide chemistry contributes a comparable signal when evaluated jointly Blaine and compact particle-size distribution representations are largely interchangeable within the descriptor space, indicating that the dominant recoverable fineness information is captured by routine measurements Equivalent alkali shows a consistent negative association with 28-day strength, through K2O in this dataset Strength class and water demand can be recovered from routine cement characterization data
How the training signal is built
The primary performance-inference analyses were carried out on the CEM I subset, defining the modeling domain before feature attribution and prediction are evaluated Classification models predict discrete labels, such as the N/R early-strength designation and the 28-day strength class (32.5, 42.5, 52.5), whereas regression models predict continuous quantities like water demand and 28-day compressive strength Linear models express 28-day compressive strength y as an additive combination of the input descriptors, meaning each descriptor contributes independently to the prediction as follows yˆ(x) = w⊤x + b Tree ensembles test whether non-linear interactions among the routine descriptors provide additional explanatory power
Where the gains come from
The results show that chemistry and fineness contain substantial recoverable performance information that transfers across independent producers, while also exposing a practical inference boundary Strength class and water demand are suitable analytical proxies for interrogating what routine cement data encodes LightGBM with SHAP TreeExplainer was applied to two secondary targets, strength class (ordinal) and water demand (continuous) before the primary 28-day regression The leading oxide contribution across both SHAP studies is the lightGBM [20] with SHAP TreeExplainer
Inference Limits of Routine Characterization
The N/R early-strength designation provides a clear limit, in which it is recoverable only as a population-level tendency, not as a physically separable class because routine descriptors do not uniquely resolve kinetic routes influenced by other factors such as grinding, sulfate–alkali chemistry, phase assemblage, and process history The residual variance unexplained by any combination of chemistry, fineness, and producer identity is consistent with physicochemical variables that routine measurements do not directly resolve This residual gap marks the practical inference limit of the present descriptor space and motivates the inclusion of sulfate speciation, phase-resolved mineralogy, thermal history, grinding practice, and other process descriptors The producer-holdout tests show that pooled absolute errors in this dataset remain comparable as producer eligibility broadens
Producer-Transfer Robustness
The complementary fully producer-transfer evaluation holds out an entire producer from training and evaluates transfer onto that producer, thereby measuring how well learned chemistry-to-performance relationships generalize when the target producer is unseen At n ≥ 5, fixed-OLS pooled R2 values of 0.48–0.52 and MAE values of 2. p. 994 MPa to 3. p. 120 MPa are obtained across 11 producers and 164 held-out samples The absolute errors remain comparable when producers with fewer samples are included, while results for individual producers remain more variable The detailed results show no consistent benefit from adding the compact PSD subset or using more complex models; Bogue-only OLS or ENET gives the strongest result for each producer This indicates that routine characterization supports useful crossproducer strength inference for this dataset, but it does not fully encode producer-specific process effects The residual gap marks the practical inference limit of the present descriptor space and motivates the inclusion of sulfate speciation, phase-resolved mineralogy, thermal history, grinding practice, and other process descriptors The boundary is therefore conditional: chemistry and fineness carry the dominant recoverable signal, while producer identity adds a small residual term only after those descriptors are present The conclusion that the dominant recoverable fineness signal is represented by simple routine descriptors is therefore not sensitive to the selected fineness encoding The overall absolute errors remain comparable when producers with fewer samples are included, while results for individual producers remain more variable
Conclusion
Across a 27-year cement dataset from 23 European producers and 476 samples, routine CEM I descriptors contain substantial recoverable and transferable information for quantifying variations in 28-day compressive strength Cement fineness, encoded either through Blaine or through a small PSD percentile subset, is the strongest single descriptor class, with the two representations largely interchangeable in within-distribution performance Oxide chemistry contributes a comparable signal at the group level Strength class and water demand are recoverable at practically useful accuracy Among individual chemical descriptors, K2O and the derived equivalent alkali (Na2Oeq) show the most consistent negative association with 28-day strength across correlation and regression analyses The N/R early-strength designation provides a clear limit, in which it is recoverable only as a population-level tendency, not as a physically separable class because routine descriptors do not uniquely resolve kinetic routes influenced by other factors such as grinding, sulfate–alkali chemistry, phase assemblage, and process history Thus, routine characterization supports useful crossproducer strength inference for this dataset, but it does not fully encode producer-specific process effects The residual gap marks the practical inference limit of the present descriptor space and motivates the inclusion of sulfate speciation, phase-resolved mineralogy, thermal history, grinding practice, and other process descriptors The dataset is available at https://doi.org/10.5281/zenodo.21389548 Scripts are available at https://doi. p. 1org/zenodo.21390858 The anonymized cement dataset supporting the findings of this study, together with a data dictionary describing the variables and units relevant to processing information is available in Zenodo Dataset: https://doi. p. 0org/zenodo.21389548 Scripts: https://doi.org/zenodo.21390858 The smaller comparative dataset used is available upon request The supplementary dataset was the result of a cooperational project funded by the German Federal Ministry for Economic Affairs and Energy (BMWK) under the Central Innovation Programme for SMEs (ZIM), Project No. p. 1 KK50086081E3 The authors gratefully acknowledge Sonocrete GmbH for providing anonymized data that contributed to this research The declaration of competing interests states that the authors have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper The study is available on arXiv as 2607.22512
--- Page 1 ---
Machine Learning Inference Limits of Routine Cement Characterization for CEM I Performance: Evidence From a Multi-Producer Dataset
Abstract
Routine cement performance characterization provides continuous quality control data, but its information content for performance inference and transferability across independent producers remains uncertain This study analyzes 476 cement records from 23 European producers, collected in one laboratory over 27 years to determine what can be inferred from routine measurements The analysis focuses on CEM I and combines oxide chemistry, Blaine fineness, particle-size distribution descriptors, physical properties, derived Bogue and equivalent-alkali descriptors with machine learning attribution and producer-transfer tests For CEM I, fineness is the strongest descriptor family for strength class and water demand, but oxide chemistry contributes a comparable signal when evaluated jointly Blaine and compact particle-size distribution representations are largely interchangeable within the descriptor space, indicating that the dominant recoverable fineness information is captured by routine measurements Equivalent alkali shows a consistent negative association with 28-day strength, through K2O in this dataset Strength class and water demand can be recovered from routine cement characterization data The early-strength designation is recovered only as a population-level tendency, not a physically separable class, because earlystrength development can arise from combinations of fineness, sulfate–alkali chemistry, phase assemblage, and plant practice Producer-holdout tests show that absolute prediction errors remain comparable across the heldout producers in this dataset, whereas recovery of within-producer strength variation is producer-dependent Routine CEM I characterization therefore supports useful performance inference across producers, while exposing producer-specific variation whose recovery may require additional speciation
--- Page 2 ---
Cement compressive strength depends jointly on composition and fineness [2] The present investigation uses explainable machine learning to probe the information content of routine cement characterization data, to uncover which chemistry and fineness descriptors support 28-day strength inference Within a single plant, chemistry and process variables are correlated in fixed plant-specific ways Evaluation across independent producers is needed to test how much of that signal remains stable outside a single plant envelope The investigation at hand therefore asks what information regarding CEM I performance is recoverable from routine cement characterization, where inference fails, and how well that inference transfers across independent producers
--- Page 3 ---
Cement compressive strength depends jointly on composition and fineness [2] Tsivilis and Parissakis [3] expressed this dependency as an empirical predictive relationship Industrial surveys also confirm that PSD and Blaine contribute beyond bulk chemistry alone Abdul et al. [5] document substantial microstructural and chemical variability across industrial clinkers Andrade Neto et al. p. 0 [6] further show, based on 40 industrial clinkers, that reactivity and strength reflect coupled variation in mineralogy, sulfate-alkali ratio, crystal size, fineness across plants What remains limited is how much downstream performance is recoverable from routine measurements across independent producers within a common analytical framework In such settings, strong performance within a restricted data domain does not necessarily imply robust transfer across shifted material populations [7]
--- Page 4 ---
Recent reviews of machine learning in cement and concrete have mainly framed strength and related material properties as prediction targets or calorimetric descriptors used to improve predictive accuracy The present investigation uses related data-driven tools to quantify how much downstream mechanical performance is recoverable from routine cement characterization data, and how well does predictability transfer across independent producers Within a single plant, chemistry and process variables are correlated in fixed plant-specific ways A model trained on such data may therefore capture local covariation together with genuine material relationships Evaluation across independent producers is needed to test how much of that signal remains stable outside a single plant envelope More reliable cross-producer inference could support preliminary cement screening based on predicted performance, reducing dependence on long-duration testing where appropriate
--- Page 5 ---
The investigation at hand therefore asks what information regarding CEM I performance is recoverable from routine cement characterization, where inference fails, and how well that inference transfers across independent producers We use explainable machine learning models as quantitative probes of routine quality control descriptors, rather than as prediction tools alone The analysis tests how much 28-day strength, strength class, and water demand can be inferred from bulk chemistry and fineness; whether Blaine and compact PSD descriptors provide distinct or redundant fineness information
--- Page 6 ---
The results show that chemistry and fineness contain substantial recoverable performance information that transfers across independent producers, while also exposing a practical inference boundary Producertransfer tests and the limited separability of the N/R early-strength designation indicate that routine cement characterization data do not fully resolve producer-specific variation, plant-specific process history, sulfate speciation, phase assemblage, or early hydration routes
--- Page 7 ---
The investigation at hand therefore asks what information regarding CEM I performance is recoverable from routine cement characterization, where inference fails, and how well that inference transfers across independent producers We use explainable machine learning models as quantitative probes of routine quality control descriptors, rather than as prediction tools alone The analysis tests how much 28-day strength, strength class, and water demand can be inferred from bulk chemistry and fineness; whether Blaine and compact PSD descriptors provide distinct or redundant fineness information
--- Page 8 ---
The results show that chemistry and fineness contain substantial recoverable performance information that transfers across independent producers, while also exposing a practical inference boundary Producertransfer tests and the limited separability of the N/R early-strength designation indicate that routine cement characterization data do not fully resolve producer-specific variation, plant-specific process history, sulfate speciation, phase assemblage, or early hydration routes
--- Page 9 ---
The investigation at hand therefore asks what information regarding CEM I performance is recoverable from routine cement characterization, where inference fails, and how well that inference transfers across independent producers We use explainable machine learning models as quantitative probes of routine quality control descriptors, rather than as prediction tools alone The analysis tests how much 28-day strength, strength class, and water demand can be inferred from bulk chemistry and fineness; whether Blaine and compact PSD descriptors provide distinct or redundant fineness information
--- Page 10 ---
The results show that chemistry and fineness contain substantial recoverable performance information that transfers across independent producers, while also exposing a practical inference boundary Producertransfer tests and the limited separability of the N/R early-strength designation indicate that routine cement characterization data do not fully resolve producer-specific variation, plant-specific process history, sulfate speciation, phase assemblage, or early hydration routes
--- Page 11 ---
The analyses above establish how much information intrinsic chemistry and fineness contribute in isolation Producer identity alone achieves R2 = 0.05 under both OLS and XGB When producer indicators are appended to Oxides+PSD, OLS improves from R2 = 0. p. 963 to 0.70 and MAE decreases from 2. p. 380 MPa to 2. p. 1
Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.
Improvements for AI systems
-
Improve prediction accuracy by using tree-based ensemble methods like XGBoost, which
test whether non-linear interactions among routine descriptors provide additional explanatory power.
This allows for capturing complex relationships beyond what linear models can encode. -
Enhance feature attribution by applying SHAP TreeExplainer to decompose model predictions into
additive contributions from each input descriptor,
offering a quantitative probe of which chemistry and fineness descriptors support 28-day strength inference. -
Develop robust cross-producer inference capabilities by implementing producer-holdout tests, as
Producer-holdout tests show that absolute prediction errors remain comparable across the heldout producers in this dataset, whereas recovery of within-producer strength variation is producer-dependent.
This quantifies the transferability boundary. -
Refine understanding of performance limits by using SHAP analysis to show how secondary targets like strength class and water demand contribute, as
Blaine and oxides contribute comparably to water demand
when considering the full multivariate model. -
Improve model interpretability regarding chemical signals by using linear models to provide an
additive baseline on performance,
allowing coefficients to be read directly as thelinear association between each descriptor and strength across producers after accounting for the other descriptors in the model.
-
Address limitations of routine characterization by using producer identity as an indicator, noting that
Producer identity alone achieves R2 = 0.05 under both OLS and XGB,
which helps define where routine data fails to resolve process-specific effects.
Related papers
- Structural contribution to light-induced gap suppression in Ta 2 NiSe 5
- Anatomy of fast current-induced skyrmion motion in synthetic antiferromagnets
- Magnetic control of an exciton-polariton condensate in a van der Waals magnet
- High-pressure elastic properties of GeO2 polymorphs up to 120 GPa
- Decoupling Strain-Rate Sensitivity and Deformation Length Scale Effects in Neutron-Irradiated Tungsten: A Coupled Nano-Indentation, HR-EBSD and Crystal Plasticity Study
- Magnetism modulation in Co3Sn2S2 by current-assisted domain wall motion