Load-induced Taylor-Aris dispersion in compliant electroosmotic pumps with viscoelastic electrolytes

arXiv:2607.21791 · physics.flu-dyn, math-ph, math.MP · Submitted 2026-07-23 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Physics. The day in general physics: instruments, methods and results across the field.

Kai: We're looking at the paper: "Load-induced Taylor-Aris dispersion in compliant electroosmotic pumps with viscoelastic electrolytes".

Paper summary: Kai: So we're looking at this paper today about "Load-induced Taylor-Aris dispersion in compliant electroosmotic pumps with viscoelastic electrolytes." It’s by Subhajyoti Sahoo and Ameeya Kumar Nayak. The main idea is they developed a coupled model for both the pumping action, which is electroosmotic, and how passive solutes spread out in this simplified fluid system.

Mira: It sounds like they are looking at how the fluid's properties—specifically a simplified Phan-Thien-Tanner or sPTT fluid—and the channel walls interacting with an electric field change things when you apply a load. The paper claims they got a closed-form flux relation by looking at both pressure and mixed contributions to the shear stress, and that this flux decreases strictly as the pressure gradient increases, which guarantees a unique local gradient at any specific throughput.

Lev: That sounds like they are tackling the two-way electrohydrodynamic coupling in a compliant slit microchannel. For real hardware, if you're trying to run this on something soft, you need that full resolution because the plate approximation isn't good enough for the full elastic response, which is why they mention resolving the full elastic response when they talk about page two of this work.

Kai: Exactly. So what matters here is how load affects dispersion. They show that under hydraulic loading, an adverse pressure gradient creates a sheared core counterflow that stays even in the thin-double-layer limit, which causes the coefficient to approach a finite plateau. That means it doesn't just keep decreasing like it would without load.

Mira: And they find something interesting when you look at fixed loaded throughput fractions, specifically where zero is less than r less than one, because there’s this partial cancellation between the electroosmotic and pressure-driven deviations from the mean profile which leads to a maximum plate number at a finite K.

Lev: That sounds like they are finding an optimum operating condition for separation performance that isn't just free flow. The result is that this optimum is conditional, meaning it depends on both the throughput you want and how thick you make that double layer, which moves the overall best operating point toward a free-flow thin-double-layer operation.

Kai: What does this mean for us? It suggests that when we use electrokinetic pumps to move things, applying a load fundamentally changes how Taylor dispersion works in these systems. Instead of it just getting worse as you push harder, the bulk shear is sustained and the coefficient levels off at a finite value under load.

Mira: And they quantify that effect by showing that this maximum plate number can be about four times higher than its free-flow value when K equals five, and two times higher when K equals twenty. That's a significant change in separation capability depending on the viscosity, which is what we call the consistency index or K in their model.

Lev: From an engineering standpoint, that saturation at a plateau under load is important for designing real systems because it gives you a predictable limit on how much dispersion you can expect to fight against when you are actively pumping something through it.

Kai: It’s also telling us about the trade-offs they found. They mention that the stall head—the pressure needed to push things—rises with viscoelasticity, but it falls with wall compliance, which is another factor in our soft materials and microchannel design considerations.

Mira: And they point out that a thin double layer actually lowers dispersion only at zero back-pressure, but once you apply load, the coefficient saturates on that plateau mentioned earlier because of the shear. So the optimum isn't always about minimizing dispersion; it’s about finding the right balance with throughput and double layer thickness.

Lev: I think what resonates is that they are validating this reduced transport model against Brownian dynamics simulations, which gives us confidence in their approach to modeling solute transport through this complex setup.

Kai: So, to sum up the paper "Load-induced Taylor-Aris dispersion in compliant electroosmotic pumps with viscoelastic electrolytes," it’s about showing how applying a load fundamentally alters Taylor dispersion in electroosmotic pumps by sustaining bulk shear and holding that loaded coefficient at a finite plateau under adverse pressure gradients.

Mira: The authors found that this maximum plate number is conditional, and simultaneous optimization over throughput and double layer thickness shifts the overall optimum toward free-flow, thin-double-layer operation.

Lev: For anyone designing these soft electrokinetic devices, it means you need to look at how your fluid's viscoelasticity interacts with wall compliance when you apply a load because that dictates where the best separation performance is going to be.

Conclusion: Kai: So, this paper is about how applying a load to an electroosmotic pump changes how much stuff spreads out in those systems.

Mira: Yeah, they are looking at a simplified fluid called sPTT—a viscoelastic one—inside a channel that can actually bend because it's soft.

Lev: The main thing is they get this closed-form relation for the flux, meaning they can predict exactly how much flow you get based on the pressure gradient and the load.

Kai: And what really caught my eye was how they handled that coupling between the pressure driving the flow and the electric field driving it.

Mira: They do a lot of math to show that under certain conditions, like when you have a fixed throughput fraction, there's this maximum plate number at some finite viscosity value K.

Lev: From an engineering standpoint, if you're building this on real hardware, that saturation point is important because it tells you the limit of separation performance under load.

Kai: It basically says that you can’t just push harder and expect better dispersion; there’s a physical limit imposed by the shear itself.

Mira: They also found that optimizing your throughput alongside how thick you make that electric double layer moves the best operating point toward a free-flow, thin double-layer setup.

Lev: That suggests for designing these soft pumps, you should really be looking at balancing those two factors—the flow rate and the thickness of the electrical layer.

Kai: It’s interesting because it shows that viscoelasticity doesn't just add noise; it fundamentally alters the dispersion characteristics under load in these electrokinetic setups.

Subhajyoti Sahoo, Ameeya Kumar Nayak

Indian Institute of Technology Roorkee

physics.flu-dyn, math-ph, math.MP

Submitted: 2026-07-23

Updated: 2026-11-15

License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/

Importance score: 64/100

The gist: We have developed a coupled model for electroosmotic pumping and passive-solute dispersion of a solvent-free simplified Phan-Thien-Tanner (sPTT) fluid in a compliant slit microchannel The flux is…

Key concepts

sPTT Fluid
This is a simplified model for a viscoelastic fluid used in the study. It describes how the fluid's shear rate changes based on the total shear stress, which is cubic rather than linear. This non-linear behavior is crucial because it prevents simple superposition of electroosmotic and pressure-driven flow effects.
Electroosmotic Pumping
This involves using an electric field to drive fluid movement near a charged surface. The applied field acts on the electrical double layer (EDL) to create a fluid flow, which is then coupled with pressure-driven flow in this system. The model tracks how these two forces interact within the microchannel.
Taylor Dispersion
This describes the spreading of a solute due to velocity variations within a fluid flow. In this context, it specifically looks at load-induced Taylor dispersion, meaning how the presence of hydraulic pressure changes this dispersion effect in an electrokinetic pump.

Terminology

Summary

We have developed a coupled model for electroosmotic pumping and passive-solute dispersion of a solvent-free simplified Phan-Thien-Tanner (sPTT) fluid in a compliant slit microchannel The flux is strictly decreasing in the pressure gradient, ensuring a unique local gradient at prescribed throughput

Model Formulation and Governing Equations

The problem involves resolving the two-way electrohydrodynamic-elastic coupling while treating the solute as a passive tracer The governing equations for incompressible flow are presented under the creeping-flow regime with small Reynolds number The total potential is decomposed into an externally imposed axial potential and an equilibrium EDL potential The constitutive model for the viscoelastic fluid is given by the simplified Phan-Thien-Tanner (sPTT) relation

Coupled Flux Relation and Flow Characteristics

A closed-form mixed-flux relation is derived from the total sPTT shear stress, retaining both pressure-only and mixed contributions The flux decreases monotonically with the pressure gradient, which guarantees a unique local pressure-gradient inversion at prescribed throughput Under hydraulic loading, an adverse pressure gradient generates a sheared core counterflow that persists in the thin-double-layer limit, causing the coefficient to approach a finite plateau At a fixed loaded throughput fraction 0 < r < 1, partial cancellation between the electroosmotic and pressure-driven deviations from the mean profile yields a maximum plate number at finite K

Solute Transport and Dispersion Analysis

Solute dispersion is modeled by a one-dimensional transport equation obtained by cross-sectional averaging and multiple scales The residence time and the outlet variance are obtained from the backward first-passage equations for the reduced one-dimensional process, with molecular diffusion retained throughout The plate number is defined from the first two temporal moments and does not require a Gaussian band

Design Implications and Trade-offs

The analysis highlights three design-relevant trends, including that load is developed only against a back-pressure, the stall head rising with viscoelasticity and falling with wall compliance A thin double layer lowers dispersion only at zero back-pressure, while under load the coefficient saturates on the plateau of Eq. (33), and the plate number instead possesses an interior maximum at a moderate double-layer thickness The joint optimization over throughput and double-layer thickness moves the overall optimum toward free-flow, thin-EDL operation

Conclusions

The paper concludes that hydraulic loading fundamentally changes Taylor dispersion in an electroosmotic pump, sustaining bulk shear and holding the loaded coefficient at a finite plateau The maximum plate number exceeds its free-flow value by factors of about four at K = 5 and two at K = 20 The optimum is conditional, and joint optimization over throughput and double-layer thickness moves the overall optimum toward free-flow thin-double-layer operation The analysis is confined to the creeping-flow, slowly varying regime with a Debye-Hückel double layer at uniform zeta potential The solvent-free sPTT model and the elastic foundation law should therefore be regarded as idealized constitutive descriptions

--- Page 1 ---

Load-dependent Taylor dispersion in a compliant electroosmotic pump conveying a simplified Phan-Thien-Tanner fluid Subhajyoti Sahoo, Ameeya Kumar Nayak∗ Department of Mathematics, Indian Institute of Technology Roorkee, Roorkee, 247667, India. Abstract We have developed a coupled model for electroosmotic pumping and passive-solute dispersion of a solvent-free simplified Phan-Thien-Tanner (sPTT) fluid in a compliant slit microchannel Pressure, wall deformation, velocity, and dispersion are evaluated self-consistently along the finite-throughput pump characteristic Lubrication theory, Debye-Hückel electrostatics, a local elastic-foundation wall law, and Taylor-Aris macrotransport yield a closed-form flux relation under simultaneous electroosmotic and pressure-driven forcing The cubic dependence of the sPTT shear rate on the total shear stress prevents superposition of the electroosmotic and pressure-driven contributions The flux is strictly decreasing in the pressure gradient, ensuring a unique local gradient at prescribed throughput Under the bulk-Ohmic approximation, current conservation also couples the axial field to the deformed gap under both constant-current and constant-voltage operation while the hydraulic load determines whether pressure is generated In pressure-free flow, thinning the electric double layer produces a nearly plug-like profile, and the Newtonian Taylor coefficient decays as K−2 with the Debye parameter K = κh0 Under hydraulic loading, however, the adverse pressure gradient generates a sheared core counterflow that persists in the thin-double-layer limit, causing the coefficient to approach a finite plateau At a fixed loaded throughput fraction 0 < r < 1, partial cancellation between the electroosmotic and pressure-driven deviations from the mean profile yields a maximum plate number at finite K This optimum is conditional: simultaneous optimization over throughput and double-layer thickness shifts the overall optimum toward free-flow, thin-double-layer operation Depending on K, viscoelasticity either enhances or suppresses loaded dispersion, whereas compliance shifts both the pump characteristic and the separation optimum Brownian dynamics simulations validate the reduced transport model The resulting load-resolution relation identifies operating conditions that balance delivered pressure and separation performance in soft electrokinetic devices 1 Introduction Electroosmotic flow (EOF) is widely used for fluid transport and actuation in lab-on-a-chip (LOC) devices and microelectromechanical systems (MEMS), with applications ranging from microthrusters and microfluidic fuel cells to biosensing, particle manipulation, mixing, and targeted drug delivery 1–4 At micro- and nanoscales, interfacial charge strongly influences the local hydrodynamics and overall device performance 5 At a charged solid-liquid interface, mobile counterions screen the surface charge and form an electrical double layer (EDL) 6 An applied axial electric field acts on the excess charge within the EDL and entrains the surrounding liquid, thereby generating EOF 7 When the EDL is thin relative to the channel gap, the velocity profile is nearly uniform across the cross section, which suppresses hydrodynamic dispersion and enables efficient, high-resolution sample transport 8, 9 The electroosmotic speed depends on the applied field, the surface ζ-potential, and the fluid rheology 10 and can be tuned through nonuniform or patterned surface charge 11 Although increasing the field strength or the ζ-potential generally increases the flow rate 12, 13 strong fields also produce Joule heating, which can damage sensitive samples and generate thermal gradients that broaden analyte bands and degrade separation resolution 14–16 Most classical EOF theories assume rigid boundaries, whereas many practical devices are fabricated from soft materials such as poly(dimethylsiloxane) (PDMS) because of their low cost, ease of molding, optical transparency, and biocompatibility 17–19 Pressure gradients generated within such channels deform the walls and create a two-way fluid-structure interaction (FSI) This coupling is particularly important in organ-on-a-chip and bioanalytical systems, where the wall deflection may be appreciable relative to the channel gap 20, 21 Experiments and analyses have shown that flow-induced deformation can substantially modify the pressure distribution, hydraulic resistance, and velocity field 22–25 The resulting elastohydrodynamic coupling alters the local force balance 26 and the wall loading in lubricated, soft, and biomimetic systems 27–29 Pressure-driven flow through deformable conduits is now well characterized Christov et al.30 combined lubrication theory with quasistatic plate bending to derive the nonlinear relation between flow rate and pressure drop in a shallow rectangular microchannel with a deformable wall Wang and Christov31 extended this framework to thick-walled channels for which the plate approximation is inadequate and the full elastic response must be resolved Boyko et al. p. 032 used reciprocal theorems for Stokes flow and linear elasticity to obtain compact relations among flow rate, pressure drop, and wall deformation Shidhore and Christov33 treated the static FSI in shallow deformable channels through a combined analytical and computational analysis More recently, Ding et al. p. 134 systematized thin-gap approximations for microfluidic device design by extending the leading-order Hele-Shaw description through a weighted-residual expansion Collectively, these studies established the influence of wall compliance on the pressure-driven hydraulic response and provided a foundation for reduced-order models of soft microfluidic conduits Electrokinetically driven FSI has developed in parallel Chakraborty and Chakraborty35, 36 analyzed electrokinetic transport in deformable microchannels and showed that an applied field modifies the pressure-supporting response, with the enhancement diminishing as the substrate becomes more compliant Rubin et al. p. 137 and Boyko et al. p. 138 demonstrated that spatially nonuniform EOF can generate internal pressure gradients and actuate elastic membranes establishing electroosmosis as a means of controlling soft lubricated structures More recently, Roy and Dhar39 studied the coupled elasto- and thermohydrodynamics of electrokinetic binary-fluid transport in compliant microconfinements Sahoo and Nayak40 considered electroosmotic lubrication of a Newtonian fluid in a prescribed compliant constriction, including short-range DLVO interactions That study addressed a prescribed nonuniform geometry and disjoining-pressure effects, but not viscoelastic mixed-flow rheology, load-generated deformation, or passive-solute transport Non-Newtonian rheology introduces a further source of nonlinearity Blood, protein and DNA suspensions, and polymer solutions are commonly modeled using power-law, Carreau, Phan-Thien-Tanner (PTT), or Bingham-type constitutive laws 41, 42 The associated stresses couple to the electroosmotic shear and modify the velocity profile, flow rate, pressure generation, and wall deformation Park and Lee43 showed that viscoelasticity reshapes the electroosmotic velocity profile and changes the volumetric flow rate in a rigid microchannel Sadek and Pinho44 analyzed oscillatory EOF of viscoelastic fluids in a microchannel For pressure-driven flow, Boyko and Christov45 quantified the coupled effects of elasticity and compliance on the relation between flow rate and pressure drop for an Oldroyd-B fluid in a deformable channel Mukherjee et al. p. 146 studied viscoelastic EOF in a deformable microchannel and showed that polymer rheology can enhance the pressure-supporting response relative to a Newtonian fluid Ramos-Arzola and Bautista47 investigated the FSI of a simplified PTT fluid using both thin- and thick-plate wall models These studies establish that viscoelasticity and wall compliance can interact strongly, but their emphasis is on flow, pressure, and deformation rather than solute dispersion at a finite-throughput operating state A parallel body of work concerns electrokinetic transport and dispersion Dietzel and Hardt48 derived the flow and induced streaming field of an electrolyte in a slit channel subjected to an axial temperature gradient within the lubrication and Debye-Hückel framework, and separated the induced axial field into physically distinct contributions Sadeghi49 derived the hydrodynamic dispersion of viscoelastic EOF in a rigid slit whereas Arcos et al. p. 150 quantified the effect of a slowly varying wall zeta potential Ghosal and Chen51 showed that EOF modifies electromigration dispersion in a capillary: moderate slip delays shock formation and reduces the total dispersion, whereas strong slip increases the Taylor-Aris contribution Chatterjee and Nayak52 examined the influence of global electroneutrality on electromigration Taylor-Aris dispersion in a microcapillary with a finite Debye layer 53 More directly relevant studies have examined passive-solute dispersion in viscoelastic or deformable channels Roy et al. p. 154 and Hossain et al. p. 155 analyzed solute transport in viscoelastic EOF through rigid microchannels For a rigid Newtonian channel, Samuel et al. p. 156 developed a comprehensive theory of Taylor dispersion under combined electroosmotic and pressure-driven forcing, identifying a shear-cancellation optimum and an optimal Péclet number validated against Brownian dynamics simulations Hoshyargar et al. p. 157 examined electroosmotically driven solute dispersion in soft microchannels bearing a polyelectrolyte layer and Talebi et al. p. 158 extended that framework by assigning distinct properties to the electrolyte and polyelectrolyte regions Jha et al. p. 1

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Improved AI can perform self-consistent modeling of coupled electroosmotic pumping and passive-solute dispersion in soft microchannels by resolving pressure, wall deformation, velocity, and dispersion along a finite-throughput pump characteristic.

  2. The system can derive a closed-form flux relation under simultaneous electroosmotic and pressure-driven forcing for a simplified Phan-Thien-Tanner fluid using lubrication theory, Debye-Hückel electrostatics, and a local elastic foundation wall law.

  3. The improved AI can identify the operating conditions that balance delivered pressure and separation performance by determining that simultaneous optimization over throughput and double-layer thickness shifts the overall optimum toward free-flow, thin-double-layer operation.

  4. The system can predict that hydraulic loading fundamentally changes the thin-double-layer dispersion limit, causing the Taylor coefficient to approach a finite plateau under adverse pressure gradients instead of decaying as K minus 2 in pressure-free flow.

  5. The AI can characterize the load resolution trade-off by mapping the plate number against delivered head fraction and hydraulic power, identifying an optimum near half stall head for certain fluid models.

  6. The system can determine that a viscoelastic gain in load has corresponding transport consequences that must be evaluated at the operating point rather than assumed absent, showing how viscoelasticity raises the electroosmotic flow rate and the integrated wall load.

  7. The AI can predict that a thin double layer lowers dispersion only at zero back-pressure, while under load, a minimum appears near K equals 6 before approaching a finite loaded plateau.

  8. The system can identify design implications where comparatively stiff, strongly viscoelastic conduits maximize the integrated wall load while compliance exacts a modest resolution penalty.

Sources

Related papers