First-principles calculation of electron-phonon spectral functions for defects using phonon interpolation
Listen
Radio episode about this paper
Transcript
Introduction to the show: ident: Condensed Matter. The day in condensed matter: materials, phases and the measurements under them.
Kai: I'm Kai.
Mira: And I'm Mira, here with Lev.
Kai: We're looking at the paper: "First-principles calculation of electron-phonon spectral functions for defects using phonon interpolation".
Mira: Here's the gist of the paper. Point defects in wide-band-gap semiconductors exhibit optical spectra strongly shaped by electron-phonon coupling, but direct first-principles calculation of the corresponding phonon sidebands is often limited by the coarse vibrational spectrum of the largest defect supercells accessible by ab-initio electronic structure codes.
Kai: In this work, we present a phonon-interpolation method for Huang-Rhys spectral densities and optical lineshape functions on hypercells created by extending the defectcontaining supercells on arbitrarily dense phonon q-point grids.
Mira: The transition-force is shown to be strongly localized around the defect, with converged localization measures obtained in a 4×4×4 supercell accessible by density functional theory calculations.
Kai: The method is based on reconstructing the transition-induced force associated with the optical excitation and using this localized force source to couple the defect transition to a densely sampled vibrational continuum.
Title and authors: Tom: So, to recap, this paper is about using electron-phonon coupling to figure out how light interacts with defects in materials like diamond, but they found a way to do it better than before by interpolating the vibrational modes over larger computational cells.
Kai: Right, so they're taking those tricky optical spectra and smoothing them out by sampling a much denser set of vibrational modes on these bigger hypercells. It’s about getting that smooth spectral density you need for real-world measurements without having to run calculations on impossibly large systems directly.
Mira: From the hardware side, I like that they focus on reconstructing the localized transition force from the initial and final state geometries. That means they don't have to calculate the whole system from scratch every time; they just use that localized force source as a starting point for coupling to the vibrational continuum.
Lev: Exactly, because you can’t run those direct first-principles calculations on thirty-two times larger supercells, so this interpolation method lets us approximate those forces with something much smaller and more manageable.
Kai: So the big win here is getting that smooth spectral density with high resolution, which helps us see both the long-wavelength acoustic stuff and those sharp van Hove features in real experiments.
Mira: And they spend time proving that their core assumption—that the transition force is localized—is actually true by using things like the inverse participation ratio and the force-weighted root mean square localization radius. It checks that their approximation of the isolated defect force source is reasonable even when they increase the size to a four by four by four supercell.
Lev: That convergence validation is key for me because it tells us exactly what size we need for our error correction hardware to get a reliable result, and the fact that those localization measures stabilize at that level gives us a clear target.
Kai: So, the big win here is getting that smooth spectral density with high resolution, which helps us see both the long-wavelength acoustic stuff and those sharp van Hove features in real experiments.
Mira: That’s what makes it useful for both emission and absorption spectra, but they also have a limitation on absorption. They found that using just ground state phonons doesn't perfectly match experimental profiles because it misses some of that vibronic mixing caused by things like Jahn-Teller activity.
Lev: So, if we want the most accurate picture for materials where the final state potential energy surface is super important, we’re going to need to go beyond this harmonic treatment and look at full Duschinsky mode mixing or explicit Jahn-Teller coupling.
Kai: It's a systematic way to improve those spectral functions, moving from discrete finite cells toward a continuous representation by sampling that vibrational continuum more densely.
Mira: So the implication is that we get a much more realistic picture of how light interacts with defects in semiconductors, even if we still need more complex physics for the final perfect absorption lineshapes.
Lev: It gives us a systematic path to convergence where the error falls predictably as you increase your sampling interval. That predictability is what engineers love.
The paper's summary: Tom: So, to recap, this paper is about using electron-phonon coupling to figure out how light interacts with defects in materials like diamond, but they found a way to do it better than before by interpolating the vibrational modes over larger computational cells.
Kai: Right, so they're taking those tricky optical spectra and smoothing them out by sampling a much denser set of vibrational modes on these bigger hypercells. It’s about getting that smooth spectral density you need for real-world measurements without having to run calculations on impossibly large systems directly.
Mira: From the hardware side, I like that they focus on reconstructing the localized transition force from the initial and final state geometries. That means they don't have to calculate the whole system from scratch every time; they just use that localized force source as a starting point for coupling to the vibrational continuum.
Lev: Exactly, because you can’t run those direct first-principles calculations on thirty-two times larger supercells, so this interpolation method lets us approximate those forces with something much smaller and more manageable.
Kai: So the big win here is getting that smooth spectral density with high resolution, which helps us see both the long-wavelength acoustic stuff and those sharp van Hove features in real experiments.
Mira: And they also suggest using excited state vibrational modes for absorption spectra instead of just ground state phonons to get a more accurate profile because it handles those vibronic mixing effects better.
Lev: That's important because that means the calculation needs to account for more than just the simplest vibrations, which adds complexity but makes the result closer to what we actually see when we measure things in a lab.
Kai: So they’re proposing a method that lets us use smaller defect supercells but still get high resolution data by intelligently interpolating over those dense vibrational modes.
Mira: The paper shows that this interpolation procedure systematically recovers the continuum contribution, meaning as you go to an even larger hypercell, the spectral density gets closer and closer to the true infinite limit.
Lev: That systematic recovery is what we need for reliable error correction; if we can see how the error falls with that sampling interval, we know exactly how much more computational power we need to get a better result.
Kai: So it’s an improvement because it gives us a structured way to increase the resolution without just blindly increasing the system size indefinitely.
Mira: It provides a pathway to calculate these functions with much finer detail than standard methods allow, which is crucial for understanding how these defects actually absorb or emit light in materials.
The paper's improvements: Kai: So to wrap up, this paper is about using electron-phonon coupling to figure out how light interacts with defects in materials like diamond, but they found a way to do it better than before by interpolating the vibrational modes over larger computational cells.
Mira: Exactly, so they're taking those tricky optical spectra and smoothing them out by sampling a much denser set of vibrational modes on these bigger hypercells. It’s about getting that smooth spectral density you need for real-world measurements without having to run calculations on impossibly large systems directly.
Lev: From the hardware side, I like that they focus on reconstructing the localized transition force from the initial and final state geometries. That means they don't have to calculate the whole system from scratch every time; they just use that localized force source as a starting point for coupling to the vibrational continuum.
Kai: Exactly, because you can’t run those direct first-principles calculations on thirty-two times larger supercells, so this interpolation method lets us approximate those forces with something much smaller and more manageable.
Mira: And they spend time proving that their core assumption—that the transition force is localized—is actually true by using things like the inverse participation ratio and the force-weighted root mean square localization radius. It checks that their approximation of the isolated defect force source is reasonable even when they increase the size to a four by four by four supercell.
Lev: That convergence validation is key for me because it tells us exactly what size we need for our error correction hardware to get a reliable result, and the fact that those localization measures stabilize at that level gives us a clear target.
Kai: So the big win here is getting that smooth spectral density with high resolution, which helps us see both the long-wavelength acoustic stuff and those sharp van Hove features in real experiments.
Mira: And they also suggest using excited state vibrational modes for absorption spectra instead of just ground state phonons to get a more accurate profile because it handles those vibronic mixing effects better.
Lev: That's important because that means the calculation needs to account for more than just the simplest vibrations, which adds complexity but makes the result closer to what we actually see when we measure things in a lab.
Kai: So they’re proposing a method that lets us use smaller defect supercells but still get high resolution data by intelligently interpolating over those dense vibrational modes.
Mira: The paper shows that this interpolation procedure systematically recovers the continuum contribution, meaning as you go to an even larger hypercell, the spectral density gets closer and closer to the true infinite limit.
Lev: That systematic recovery is what we need for reliable error correction; if we can see how the error falls with that square of the sampling interval, we know exactly how much more computational power we need to get a better result.
Kai: So it’s an improvement because it gives us a structured way to increase the resolution without just blindly increasing the system size indefinitely.
Mira: It provides a pathway to calculate these functions with much finer detail than standard methods allow, which is crucial for understanding how these defects actually absorb or emit light in materials.
Lev: For me, this confirms that we can use this interpolation approach to approximate isolated defect forces without needing prohibitively large direct first-principles calculations, which really saves compute time on our end.
Kai: So the work on "First-principles calculation of electron-phonon spectral functions for defects using phonon interpolation" gives us a solid foundation for getting converged electron-phonon spectral functions for localized defects.
Mira: It points us toward the next level of complexity where we need to look at full Duschinsky mode mixing if we want a completely quantitatively complete description of the final state potential energy surface.
Lev: I think what’s coming next is how this method scales when we try to apply it to even larger defect systems or when we introduce more complex coupling mechanisms, because that's where the real computational cost will land on our error correction hardware.
Conclusion: Kai: So we're wrapping up on "First-principles calculation of electron-phonon spectral functions for defects using phonon interpolation." Basically, they figured out how to get much smoother spectral densities for light interacting with defects in materials like diamond by interpolating vibrational modes over bigger computational cells.
Mira: Right, so they're taking those tricky optical spectra and smoothing them out by sampling a much denser set of vibrational modes on these bigger hypercells. It’s about getting that smooth spectral density you need for real-world measurements without having to run calculations on impossibly large systems directly.
Lev: From my side, I like that they focus on reconstructing the localized transition force from the initial and final state geometries. That means they don't have to calculate the whole system from scratch every time; they just use that localized force source as a starting point for coupling to the vibrational continuum.
Kai: Exactly, because you can’t run those direct first-principles calculations on thirty-two times larger supercells, so this interpolation method lets them approximate those forces with something much smaller and more manageable.
Mira: And they spend time proving that their core assumption—that the transition force is localized—is actually true by using things like the inverse participation ratio and the force-weighted root mean square localization radius. It checks that their approximation of the isolated defect force source is reasonable even when they increase the size to a four by four by four supercell.
Lev: That convergence validation is key for me because it tells them exactly what size they need for their error correction hardware to get a reliable result, and the fact that those localization measures stabilize at that level gives them a clear target.
Kai: So the big win here is getting that smooth spectral density with high resolution, which helps them see both the long-wavelength acoustic stuff and those sharp van Hove features in real experiments.
Mira: That’s what makes it useful for both emission and absorption spectra, but they also flagged a limitation on absorption. They found that using just ground state phonons doesn't perfectly match experimental profiles because it misses some of that vibronic mixing caused by things like Jahn-Teller activity.
Lev: So if they want the most accurate picture for materials where the final state potential energy surface is super important, they need to go beyond this harmonic treatment and look at full Duschinsky mode mixing or explicit Jahn-Teller coupling.
Kai: It's a systematic way to improve those spectral functions, moving from discrete finite cells toward a continuous representation by sampling that vibrational continuum more densely.
Mira: So the implication is that they get a much more realistic picture of how light interacts with defects in semiconductors, even if they still need more complex physics for the final perfect absorption lineshapes.
Lev: It gives them a systematic path to convergence where the error falls predictably as you increase their sampling interval, and that predictability is what engineers love.
Kai: So we start with this paper on "First-principles calculation of electron-phonon spectral functions for defects using phonon interpolation" showing how to build denser vibrational representations. We see that the method works well for emission spectra and that it provides a solid framework, even if they still need to address those excited state effects for perfect absorption lineshapes.
Mira: The implication is that they can now calculate these spectral functions with better resolution than before, which helps them understand the optical properties of defects in materials like diamond, providing a more detailed picture of how light interacts with them.
Lev: We’ll keep an eye on how this interpolation method scales when they try to apply it to larger defect systems or when they introduce more complex coupling mechanisms, because that's where the real computational cost will land on their error correction hardware.
Kai: That's all for today's look at this paper. We’ll be back tomorrow with a different piece of research from arXiv.
HUN-REN Wigner Research Centre for Physics · Department of Atomic Physics, Budapest University of Technology and Economics
cond-mat.mtrl-sci
Submitted: 2026-07-22
Updated: 2026-11-16
Code: https://github.com/zoltan-santha/pysideband
License: http://creativecommons.org/licenses/by/4.0/
Importance score: 83/100
The gist: Point defects in wide-band-gap semiconductors exhibit optical spectra strongly shaped by electron-phonon coupling…
Key concepts
- Phonon Interpolation Method
- This technique builds larger 'hypercells' by repeating the original defect supercell many times along phonon q-point grids. It uses a localized transition force to couple the defect transition to this dense vibrational grid, effectively sampling a much wider range of vibrational modes than is possible in small calculations.
- Localized Transition Force Source
- The method reconstructs the force acting on the defect transition by comparing relaxed initial and final state geometries. This localized source term approximates the force felt by an isolated defect, making it feasible to calculate spectral functions without needing prohibitively large direct first-principles calculations.
- Inverse Participation Ratio (IPR)
- IPR is a measure used to quantify how localized a property, like the transition force, is within a system. In this work, researchers use IPR alongside other metrics to prove that the calculated force source remains strongly localized around the defect site even as the supercell size increases.
- Huang-Rhys Spectral Density
- This function describes how electronic transitions are coupled to vibrations (phonons). The interpolation method transforms discrete spectra from small cells into smooth spectral densities by sampling a denser vibrational continuum, revealing both low-energy acoustic modes and sharp optical features.
Terminology
Summary
Point defects in wide-band-gap semiconductors exhibit optical spectra strongly shaped by electron-phonon coupling, but direct first-principles calculation of the corresponding phonon sidebands is often limited by the coarse vibrational spectrum of the largest defect supercells accessible by ab-initio electronic structure codes. p. 0 First-principles calculation of electron-phonon spectral
functions for defects using phonon interpolation
Zoltán Sántha1,2,∗
, Gergő Thiering1†
1HUN-REN Wigner Research Centre for Physics, PO Box 49, H-1525 Budapest, Hungary
2Department of Atomic Physics, Budapest University of Technology and Economics,
Budafoki út 8, H-1111 Budapest, Hungary
24th July 2026
Abstract
Point defects in wide-band-gap semiconductors exhibit optical spectra strongly shaped by electronphonon coupling, but direct first-principles calculation of the corresponding phonon sidebands is often
limited by the coarse vibrational spectrum of the largest defect supercells accessible by ab-initio electronic structure codes. In this work, we present a phonon-interpolation method for Huang-Rhys
spectral densities and optical lineshape functions on hypercells created by extending the defectcontaining supercells on arbitrarily dense phonon q-point grids. First-principles calculation of electron-phonon spectral
functions for defects using phonon interpolation
Zoltán Sántha1,2,∗
, Gergő Thiering1†
1HUN-REN Wigner Research Centre for Physics, PO Box 49, H-1525 Budapest, Hungary
2Department of Atomic Physics, Budapest University of Technology and Economics,
Budafoki út 8, H-1111 Budapest, Hungary
24th July 2026
Abstract
Point defects in wide-band-gap semiconductors exhibit optical spectra strongly shaped by electronphonon coupling, but direct first-principles calculation of the corresponding phonon sidebands is often
limited by the coarse vibrational spectrum of the largest defect supercells accessible by ab-initio electronic structure codes. In this work, we present a phonon-interpolation method for Huang-Rhys
spectral densities and optical lineshape functions on hypercells created by extending the defectcontaining supercells on arbitrarily dense phonon q-point grids. We demonstrate the method on
the negatively charged nitrogen-vacancy centre in diamond between its ground 3A2 and excited 3E
states. The transition-force is shown to be strongly localized around the defect, with converged localization measures obtained in a 4×4×4 supercell accessible by density functional theory calculations.Where the paper says it
Where the paper says it
Where the paper says it
Methodology of Interpolation
The method is based on reconstructing the transition-induced force associated with the optical excitation and using this localized force source to couple the defect transition to a densely sampled vibrational continuum. This allows the vibrational continuum to be sampled with high energy resolution while retaining the ab initio description of the local defect physics. p. 1 Instead of directly using the relaxed displacement field of a
finite periodic supercell, which contains the elastic response of a periodic array of defects, we reconstruct
the localized transition-force source and couple it to an interpolated vibrational representation of a larger
system. This allows the vibrational continuum to be sampled with high energy resolution while retaining
the ab initio description of the local defect physics.Where the paper says it
-
Reconstructing the localized transition-force source from relaxed initial- and final-state geometries. p. 9
Where the paper says it
Nevertheless, the directly relaxed supercell displacement ∆R˜ can still be used to reconstruct the corresponding supercell transition force through the harmonic force-displacement relation, F˜tr = Φ˜f∆R˜ , thereby extracting the localized force source while avoiding small anharmonic errors associated with evaluating the transition force directly at a non-equilibrium geometry. We therefore use this relation to obtain the F˜tr transition force from the relaxed initial- and final-state nuclear configurations in the finite supercell.
-
Coupling this force source to an interpolated vibrational representation of a larger system. p. 1
Where the paper says it
The method is based on the observation that, for chargeconserving optical transitions between localized defect states in a gapped host, the transition-induced force is strongly localized around the defect. Instead of directly using the relaxed displacement field of a finite periodic supercell, which contains the elastic response of a periodic array of defects, we reconstruct the localized transition-force source and couple it to an interpolated vibrational representation of a larger system.
-
Constructing a hypercell by repeating the defect-containing supercell M1 × M2 × M3 times. p. 9
Where the paper says it
The resulting hypercell (supercell of supercells, Fig. 1) is obtained by repeating the defect-containing supercell M1 × M2 × M3 times.
-
Diagonalizing the q-dependent dynamical matrix to obtain interpolated phonon frequencies and eigenvectors. p. 0
Where the paper says it
The method is based on reconstructing the transition-induced force associated with the optical excitation and using this localized force source to couple the defect transition to a densely sampled vibrational continuum. In this formulation, the local defect physics is obtained from ab initio supercell calculations, while the longwavelength acoustic modes and the detailed structure of the host phonon spectrum are recovered by diagonalizing interpolated dynamical matrices in large hypercells.
Validation of Locality
The central assumption is that the transition-induced force acts as a localized source term. This locality is quantified using three complementary measures for the mass-weighted transition force f tr a:
-
Inverse participation ratio (IPR). p. 4
Where the paper says it
(−Sν) l , where the displacement is now characterized through the partial Huang-Rhys factor: Sν = Ων |∆Qν| 2 2ℏ . When trying to evaluate Ai→f (ℏω), it is highly advantageous to substitute the δ distribution with its formal representation through the inverse Fourier transform of the tempered distribution f(t) = 1 as δ (ℏω ± (Ei,n − Ef,m)) = 1 2πℏ Z +∞ −∞ e −i(ℏω±(Ei,n−Ef,m))t/ℏ dt.
-
Cumulative force weight C(R). p. 0
Where the paper says it
In this work, we present a phonon-interpolation method for Huang-Rhys spectral densities and optical lineshape functions on hypercells created by extending the defectcontaining supercells on arbitrarily dense phonon q-point grids. The method is based on reconstructing the transition-induced force associated with the optical excitation and using this localized force source to couple the defect transition to a densely sampled vibrational continuum.
-
Force-weighted root-mean-square localization radius RRMS. p. 8
Where the paper says it
The transition density may possess formal electrostatic multipoles, but the corresponding transition-force tail is weighted by ϵ −1 ∞ and by Z ∗ or higher forceresponse tensors. When the ∥Z ∗ a∥ ϵ −1 ∞ |ML| effective coefficient is small, the force magnitude measured over accessible distances is governed by the exponentially localized transition kernel, rather than by the formal multipolar asymptote, yielding F tr(R) ∼ AF exp (−R/ξ) (R + rc) p , and the localization of the transition-force depends on the localization of the underlying defect orbitals relevant to the transition.
The convergence of these indicators from the 3×3×3 to the 4×4×4 supercell supports the use of the 4×4×4 transition-force field as an approximation to the isolated-defect force source. p. 9 Consequently, periodicboundary artefacts are much weaker for F
tr than for the displacement field ∆R. The supercell transition
forces F˜tr may therefore be used as an approximation to the isolated-defect force source, whereas the
directly relaxed supercell displacement ∆R˜ corresponds to the elastic response of a periodic array of
coherently transformed defects.Where the paper says it
Spectral Resolution and Convergence
The interpolation procedure transforms discrete spectra from finite defect supercells into smooth spectral densities by sampling a denser vibrational continuum. This process resolves both the low-energy acoustic contribution and sharper structures associated with optical phonon van Hove features. p. 0 We interpolate the electron-phonon coupling on hypercells up to 32 × 32 × 32 corresponding to approximately 17 million atoms, thereby recovering smooth, continuous Huang-Rhys spectral densities
with ultrafine spectral resolution. The dominant coupling band is found near 63 meV; the low-energy
acoustic contribution follows the expected linear scaling; and we recover the finer van-Hove-related
structures in the optical phonon regime observed in experiments. Alternatively, the generating function may be written in terms of the Fourier transform of the shifted
Huang-Rhys spectral-density
S¯(t) = X
ν
Sν
e
iΩν t − 1
and its thermal phonon occupation number weighted version
S¯(T;t) = X
ν
n¯νSν
e
iΩν t − 1
yielding
G
(±)
(t) = exp
S¯(±t) + S¯(T;t) + S¯(T; −t)
. (Note that S(0) = S is the total Huang-Rhys factor.Where the paper says it
Where the paper says it
Benchmark Results and Limitations
The negatively charged nitrogen-vacancy centre in diamond was used as a benchmark system. The interpolated spectra reproduce the experimental low-temperature line shape with good accuracy, capturing both the broad phonon-sideband envelope and its finer spectral features. p. 2 The
A
(±)
i→f
(ℏω) spectral line-shape functions contain the Franck-Condon redistribution of optical intensity,
phonon side-bands [7, 8], zero-phonon contribution, temperature-dependent vibrational populations,
electron-phonon coupling strength and Stokes shifts that shape the observed emission and absorption
spectra, and, as such, are our target quantities. Additional homogeneous and inhomogeneous broadening
mechanisms may need to be imposed, for example by replacing the δ distribution with broadened kernels,
in order to compare ab-initio results to experimental data. )
4 First-Principles Calculations
In order to determine the target quantities, S (ℏω) and Ai→f (ℏω), using the interpolation method detailed
in the next section, we first have to determine the equilibrium nuclear configurations of the initial and final
electronic states of the system under investigation. In addition, an appropriate force-constant kernel is
required in order to describe the nuclear motion within the parallel-mode, equal-frequency approximation
introduced in Section 3.Where the paper says it
Where the paper says it
Conclusion and Future Work
The transition-force interpolation method provides an efficient and systematically improvable route to converged electron-phonon spectral functions of localized defects. The approach is particularly useful when the electronic transition is local but the optical line shape depends on a dense sampling of extended vibrational modes. p. 1 This is particularly problematic not only at low phonon energies, where the acoustic contribution is
controlled by modes whose wavelengths are much larger than typical first-principles supercells, but also
near critical points of the phonon dispersion, where van Hove singularities in the phonon density of states
may produce sharp features in the vibronic sideband. An accurate optical line shape therefore requires
a vibrational representation dense enough to capture both the long-wavelength acoustic continuum and
the fine structure of the optical phonon spectrum. It is evident that nuclear motion is approximated by independent harmonic oscillators and one gets two sets of normal coordinates, which are related in full generality by a Duschinsky
transformation [9]
Qf,ν =
X
µ
Jν,µQi,µ + Kν,
where J mixes normal modes between the two electronic states, and K is the displacement between the two
minima. The required full multidimensional Franck-Condon/Doktorov treatment [10] of this problem is
outside of the scope of this paper and we make the parallel-mode, equal-frequency approximation, setting
Jν,µ = δν,µ
and imposing the Ωi,ν = Ωf,ν ≡ Ων constraint.Where the paper says it
Where the paper says it
Code Availability
The phonon-interpolation method described in this work is implemented in a publicly available commandline Python software package hosted on GitHub at github.com/zoltan-santha/pysideband. p. 0 A supercell containing N ions provides only 3N −3 non-translational
∗
santha. zoltan@wigner. We use density functional theory (DFT) as our first-principles framework, which
has become the standard approach for investigating the electronic, structural, and vibrational properties
of defects in semiconductors and insulators. Since the target systems are point defects embedded in extended crystalline hosts, we use periodic
boundary conditions within the supercell method. For the ground-state calculations, C3v spatial symmetry was enforced
to reduce the computational cost, whereas the excited-state relaxations were performed without imposing
spatial symmetry in order to allow Jahn-Teller distortions. 5 Interpolation Methodology
Within the Franck-Condon approximation, electronic occupations change on a timescale much shorter
than that of nuclear motion, leaving the ionic positions effectively fixed during the transition.Where the paper says it
Where the paper says it
Where the paper says it
Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.
Improvements for AI systems
-
Phonon-interpolation method for Huang-Rhys spectral densities: The system can calculate smooth, continuous Huang-Rhys spectral densities with ultrafine spectral resolution by interpolating electron-phonon coupling on hypercells up to 32 times larger than the initial defect supercell, recovering both the long-wavelength acoustic modes and fine van Hove structures.
-
Localized transition force source for first-principles calculations: The AI system can determine localized transition forces from relaxed initial and final state geometries to approximate isolated defect forces, avoiding prohibitively large direct first-principles calculations.
-
Convergence validation of localization measures: The system can validate the locality assumption by showing that increasing hypercell size refines the vibrational continuum rather than changing the local electron-phonon coupling problem through convergence of metrics like the inverse participation ratio and force-weighted RMS radius.
-
Temperature dependent line shape analysis: The AI system can calculate temperature dependent emission and absorption line-shape functions using ground or excited state vibrational modes, enabling a description of phonon annihilation channels that smooths fine structure near the zero-phonon line.
-
Absorption spectrum accuracy improvement: By calculating absorption line shapes using excited state vibrational modes instead of ground state phonons, the system can more accurately reproduce experimental profiles in the first phonon sideband region due to Jahn-Teller activity.
Abstract
Accurate optical lineshapes of point defects require dense sampling of lattice vibrations, which is challenging for direct first-principles supercell calculations. We introduce a phonon-interpolation method for calculating Huang-Rhys spectral densities and optical lineshapes within the harmonic Franck-Condon framework. By exploiting the spatial localization of transition-induced forces, the method obtains electron-phonon coupling from a tractable defect supercell and samples its vibrational response on dense reciprocal-space grids, avoiding explicit construction and diagonalization of large hypercell dynamical matrices. Applied to the negatively charged nitrogen-vacancy center in diamond, the method resolves low-energy acoustic contributions, the dominant phonon sideband structure, and finer optical-phonon features. The resulting temperature-dependent photoluminescence lineshapes reproduce the main features of experimental spectra after accounting for additional broadening. The approach offers an efficient route to high-resolution defect spectra and can, in principle, complement embedding and machine-learning methods.
Related papers
- Structural contribution to light-induced gap suppression in Ta 2 NiSe 5
- Anatomy of fast current-induced skyrmion motion in synthetic antiferromagnets
- Magnetic control of an exciton-polariton condensate in a van der Waals magnet
- High-pressure elastic properties of GeO2 polymorphs up to 120 GPa
- Decoupling Strain-Rate Sensitivity and Deformation Length Scale Effects in Neutron-Irradiated Tungsten: A Coupled Nano-Indentation, HR-EBSD and Crystal Plasticity Study
- Magnetism modulation in Co3Sn2S2 by current-assisted domain wall motion