Distributed Topological Charge and Spinorial Holonomy in Yukawa-Regularized Graphene Disclinations

arXiv:2607.16835 · cond-mat.mes-hall, gr-qc · Submitted 2026-07-18 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Quantum Radio. Generated commentary on the latest quantum physics and condensed matter papers.

Kai: We're looking at the paper: "Distributed Topological Charge and Spinorial Holonomy in Yukawa-Regularized Graphene Disclinations".

Paper summary: Kai: So to wrap up this paper, "Distributed Topological Charge and Spinorial Holonomy in Yukawa-Regularized Graphene Disclinations," what we have is a picture where the singularity isn't a hard point anymore. The authors replace the sharp apex with a smooth distribution using that Yukawa kernel.

Mira: And the main finding is that this replacement leads directly to a scale-dependent topological charge and a radius-dependent holonomy, which interpolates between local Euclidean behavior and that asymptotic conical regime.

Kai: So, instead of one fixed number for the charge, you get Q rho equals Lambda minus mu rho K1 mu r. This means the topological property is measured differently depending on the loop size you choose to measure it with.

Lev: For hardware designers, this tells us that the error accumulation isn't just determined by a single fixed flux; it depends on how far out you are looking at your system and what regularization length scale mu you’re imposing.

Mira: The authors confirm that while the local structure changes—it spreads out over a finite region—the global topological signature remains robust because the Gauss-Bonnet theorem ensures that the total integrated curvature is fixed by Lambda, no matter how it's distributed.

Kai: This means we still have that asymptotic conical deficit angle, but now we see how it gets built up progressively as you enclose more of this smooth curvature distribution.

Lev: It provides a clearer link between the local geometry and those geometric phases that spinors acquire in curved space, which is crucial for understanding spinorial effects in condensed matter systems.

Mira: It moves the discussion from just asking what happens to a sharp point to exploring how distributed curvature dictates the spatial accumulation of topological properties.

Conclusion: Kai: So we've looked at how replacing a sharp point with a smooth distribution—that Yukawa regularization—changes the geometry of graphene defects in this paper, "Distributed Topological Charge and Spinorial Holonomy."

Mira: Yeah, basically, it's about seeing how spreading out the curvature affects the total topological charge you measure around a defect.

Lev: From an engineering standpoint, what this means is that instead of one single fixed amount of topological frustration at a sharp edge, you get something that depends on where you are measuring it.

Kai: Exactly. The authors show that this charge isn't just static; it grows continuously as you move outward from the defect core, and it only settles down to the total number when you go really far away.

Mira: And that’s tied into a concept called holonomy, which is how a spinor—a quantum particle—behaves as it travels around this curved space.

Lev: The paper connects those two things by showing that the angle you measure by circling a loop of radius rho is directly related to the charge enclosed in that loop.

Kai: So, even though the local structure looks different because of this smooth core, the global topological signature stays the same because of this overall Gauss-Bonnet theorem.

Mira: Right. It’s like having a blurry spot instead of a sharp spike; you can't tell exactly where it starts and stops locally, but the total amount of "twist" is still there.

Lev: The real implication here is that for actual hardware, the local physics near the defect will be different depending on the scale you are looking at, so we have to account for that spatial variation in our error models.

Instituto de Física, Universidade Federal da Alagoas · Centro de Ciências, Tecnologia e Saúde, Universidade Estadual da Paraíba · Centro de Ciências Exatas e das Tecnologias, Universidade Federal do Oeste da Bahia · Departamento de Física, Universidade Federal da Paraíba

cond-mat.mes-hall, gr-qc

Submitted: 2026-07-18

Updated: 2026-11-18

Journal ref: Eur. Phys. J. Plus (2026) 141:1297

DOI: 10.1140/epjp/s13360-026-08540-5

License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/

Importance score: 75/100

The gist: Distributed Topological Charge and Spinorial Holonomy in Yukawa-Regularized Graphene Disclinations is an investigation into how replacing a singular apex with a smooth curvature distribution via a…

Key concepts

Yukawa-Screened Curvature
This method uses a specific mathematical kernel (K0) to define how curvature is distributed. It introduces an intrinsic screening length, meaning the curvature is not infinitely sharp but fades smoothly over a certain distance, controlling the size of the regularized region.
Effective Topological Charge Q(ρ)
The total topological charge enclosed by a circle of radius ρ changes continuously as you increase ρ. It approaches the total fixed charge only asymptotically. This shows that while the distribution is spread out, the global topological signature remains consistent.
Spinorial Holonomy
This describes how a spinor (a quantum state) rotates when transported around a loop in curved space. In this context, it becomes radius-dependent and links the local geometry to the enclosed topological charge, showing how curvature affects quantum phases.

Terminology

Summary

Distributed Topological Charge and Spinorial Holonomy in Yukawa-Regularized Graphene Disclinations is an investigation into how replacing a singular apex with a smooth curvature distribution via a Yukawa-type regularization modifies the geometric and topological properties of graphene disclinations, revealing scale-dependent topological charge and holonomy that interpolate between local Euclidean behavior and the asymptotic conical regime. p. 0

Geometric Framework

The work adopts the geometric theory of defects developed by Katanaev and Volovich, where curvature describes disclinations and torsion describes dislocations, establishing a correspondence between defect theory and Riemann–Cartan geometry The transverse metric is expressed in conformal form as ds2 = e2omega(r)dr2/2 + r2/2dθ2, where the conformal factor fully determines the geometry The Einstein-like field equation reduces to a Poisson-like equation for the conformal factor, ∆omega(r) = − λ(r), as it describes the source of stress and strain fields

Yukawa-Screened Curvature

The curvature density is prescribed by the two-dimensional modified Helmholtz kernel K0(µr), introducing an intrinsic screening length into the geometry The normalization ensures that the total integrated Gaussian curvature is fixed at Λ, while µ−1 sets the corresponding screening length The conformal factor is derived as omega(r) = − Λ/2πln r − Λ/2πK0(µr) + C, which yields a metric that interpolates smoothly from a regular core to an asymptotic cone The crossover is set by the screening length l = µ−1, showing how µ controls the size of the regularized region

Curvature Distribution and Effective Charge

The Ricci scalar R(r) exhibits a core peak associated with the logarithmic behavior of K0(µr) near the origin, while for r → ∞, it decays exponentially, exhibiting a Yukawa-type screening The effective enclosed topological charge Q(ρ) increases continuously with the radial coordinate and approaches the total charge only asymptotically as lim ρ→∞ Q(ρ) = Λ The Gauss–Bonnet theorem ensures that the global topology depends only on the integrated curvature, confirming that the asymptotic deficit angle remains unchanged regardless of spatial distribution

Holonomy and Effective Topological Charge

The holonomy becomes radius-dependent, evolving continuously with the loop radius and approaching the conical result only asymptotically The angle associated with parallel transport around a circle of radius ρ is δ(ρ) = −2πρ omega'(ρ), which coincides exactly with the effective topological charge enclosed by a circle of radius ρ, Q(ρ) = Λ [1 − µρK1(µρ)] This relationship shows that the deficit angle measured by parallel transport is precisely determined by the curvature enclosed by the transport loop

Massless Dirac Fermions in the Regularized Geometry

The dynamics of massless Dirac quasiparticles are described by a curved-space Dirac equation, where the term proportional to omega'(r) originates from the spin connection and describes the coupling between the Dirac pseudospin and the curvature distribution In the opposite regime, r ≫ µ−1, the radial equations reduce to a shift of the effective angular-momentum quantum number, m→m + Λ/4π, which is entirely induced by the spin connection The geometric phase acquired by a spinor is directly controlled by the enclosed topological charge through U(ρ) = exp − i 2 Q(ρ)σ3 This result indicates that the regularization modifies the local structure of the defect while preserving its asymptotic topological signature

Conclusions

The regularization does not alter the total topological charge of the defect, which remains fixed by the Gauss–Bonnet theorem, but changes how this charge is distributed through space Instead of concentration at a singular apex, curvature is spread over a finite region, leading naturally to a radius-dependent topological charge and scale-dependent holonomy Geometric phases are accumulated progressively as larger portions of the curvature distribution are enclosed, providing a direct connection between local geometric structure and global topological properties The singular interaction characteristic of ideal conical defects is replaced by a smooth finite-core structure, while the asymptotic topological signature survives through both the effective angular-momentum shift and the radius-dependent spinorial holonomy Possible extensions include the study of torsional generalizations and more general curvature distributions

Acknowledgments

This work was supported by Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq) and Fundação de Apoio a Pesquisa do Estado da Paraíba (Fapesq-PB) G. Q. Garcia would like to thank Fapesq-PB for financial support (Grant BLD-ADT-A2377/2024) The work by C. p. 1 Furtado is supported by the CNPq (project PQ Grant 1A No. p. 0 311781/2021-7) E.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Improved AI can model graphene-like systems by incorporating finite-core defect geometries into its effective gauge fields and curved metrics, allowing it to predict how massless Dirac quasiparticles respond to distributed curvature rather than a singular apex.

  2. Improved AI can calculate radius dependent topological charge and scale dependent holonomy for any given regularization parameter mu, providing a direct link between local geometric structure and global topological properties.

  3. Improved AI can determine the critical radii where discrete holonomy invariance is met by solving the condition n lambda [1 minus mu rho K1(mu rho)] equals 2 pi m, identifying specific physical scales where geometric phases become trivial.

  4. Improved AI can simulate quasiparticle dynamics in regularized geometries by using the Yukawa-regularized radial Dirac equations, allowing it to show how the geometry modifies the spin connection and introduces an effective angular momentum shift for large distances.

Related papers