Oxygen-nonstoichiometry-driven phase transition in Sr 1-x Nd x CoO 3-delta (x = 0.1, 0.2, 0.3) perovskites

arXiv:2607.10346 · cond-mat.mtrl-sci · Submitted 2026-07-11 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Condensed Matter. The day in condensed matter: materials, phases and the measurements under them.

Kai: We're looking at the paper: "Oxygen-nonstoichiometry-driven phase transition in Sr 1-x Nd x CoO 3-delta (x = 0.1, 0.2, 0.3) perovskites".

Mira: Here's the gist of the paper. Oxygen-nonstoichiometry-driven phase transition in Sr1−xNd xCoO3−δ (x = 0.1, 0.2, 0.3) perovskites reports a systematic study of how increasing oxygen content induces a structural transition and changes in magnetic and transport properties in Sr1−xNd xCoO3−δ (x = 0.1, 0.2, 0.3) perovskites.

Kai: Phase Transition Mechanism The study reveals that increasing the oxygen content induces a structural transition from a layered I4/mmm (2ap × 2ap × 4ap) to an oxygen-deficient orthorhombic Pmmm (ap × ap × 2ap) phases with preferential oxygen-vacancy occupation.

Mira: This transition is accompanied by a crossover from G-type antiferromagnetic with a weak ferromagnetic component to a ferromagnetic state, and a drastic decay in resistivity.

Kai: The stabilization of the layered “314” structure is driven by the presence and ordering of oxygen vacancies rather than A-site cation ordering.

Paper summary: Kai: Hey Mira, so we're looking at this paper today: "Oxygen-nonstoichiometry-driven phase transition in Sr one-x Nd x CoO three-delta (x = zero point one, zero point two, zero point three) perovskites <ref:2607.10346#pg1,x = 0.1, 0.2, 0.3) perovskites>." Basically, it systematically studies how adding oxygen changes everything in these cobaltite materials by just changing the oxygen content across a few specific compositions like x equals zero point one, zero point two, and zero point three.

Mira: Right. So the main thesis here is that increasing the oxygen content causes a structural shift and also alters the magnetic and electrical properties of these Sr one-x Nd x CoO three-delta perovskites because of how much oxygen there is in them <ref:2607.10346#pg1,that increasing the oxygen content>. It suggests that we need to look at how oxygen nonstoichiometry drives these changes, rather than just the A site cations ordering.

Lev: From an engineering standpoint, I’m interested in the structural transition part—moving from one crystal structure to another based on oxygen content—because that dictates what kind of material you can actually build for hardware. If you're building a device, knowing exactly what phase you have is crucial for predicting its performance and stability.

Kai: Exactly, Lev. The paper claims that this transition moves the structure from a layered I four slash m m m with a two ap times two ap times four ap unit cell to an oxygen-deficient orthorhombic P m m m phase with preferential oxygen vacancy occupation. It also links this structural change to a crossover in magnetic behavior, going from something G type antiferromagnetic with a weak ferromagnetic component over to a full ferromagnetic state and a really sharp drop in resistivity.

Mira: And the authors argue that the stabilization of that layered "three hundred fourteen" structure happens because of how those oxygen vacancies are present and ordered, not because of how the A site cations are arranged <ref:2607.10346#pg2>. That's a big point because it changes where we focus our attention when trying to engineer these materials.

Lev: So if we look at the magnetic side, they discuss how this evolution is tied to changes in the Co spin state and enhanced Co three d minus O two p orbital overlap when oxygen gets taken up. That sounds like a mechanism that could explain why you see a magnetically inhomogeneous ferromagnetic state, which they link to residual oxygen vacancies and mixed cobalt valence states, like Co three plus or four plus.

Kai: And in terms of transport, the resistivity data is pretty telling too. They show that when the oxygen index increases from two point six nine to two point seven eight for the N one sample, there's a drastic drop in those resistivity values and they suggest this semiconducting-like behavior supports that mixed spin state scenario as the most probable model.

Mira: That means for the N three oxygenated compound, they say it might be the only one in this series where you should really apply that itinerant electron model proposed by Bezdicka et al.

Lev: For running this on real hardware, I wonder how significant that mixed spin state scenario is in terms of error correction overhead. If the magnetic inhomogeneity is strong due to those vacancies, managing that disorder becomes a big challenge for maintaining fidelity when we try to use these materials for quantum applications.

Kai: The paper also points out how the temperature dependence shifts; the Curie temperature, or TC, increases with Nd content and goes from approximately one hundred sixty degrees Kelvin for N one oxygenated to about two hundred degrees Kelvin for N three oxygenated.

Mira: So putting it together, the core message of this paper is that oxygen nonstoichiometry isn't just a side effect; it's the primary driver causing these distinct structural transitions and magnetic changes in Sr one-x Nd x CoO three-delta perovskites <ref:2607.10346#pg1>.

Lev: For someone who only listens to this, what does that mean? It means that if you want to engineer these cobaltites for specific magnetic or electronic behaviors, you can't just tune the A site; you have to seriously consider controlling the oxygen content because it fundamentally dictates the resulting phase and magnetism.

Kai: And their conclusion really hammers this home by saying the driving force for stabilizing that layered "three hundred fourteen-type" structure is definitely that presence and longrange ordering of oxygen vacancies, not just the A site cation ordering <ref:2607.10346#pg2>.

Mira: So, what's the big picture implication here? It reinforces a way of thinking about how these transition metal oxides work—the oxygen deficiency dictates the structure and magnetism first, which then leads to those different transport behaviors.

Lev: If we look ahead, I think future work would need to focus on experimentally realizing that longrange ordering of those vacancies in a controlled manner. Because right now, it sounds like controlling that vacancy ordering is the key lever you need to pull if you want reproducible performance in these systems.

Kai: So the whole point boils down to this: oxygen nonstoichiometry controls the structure, which controls the magnetism, which then dictates how well it conducts electricity. It’s a tightly coupled system where oxygen plays a central role in setting the stage.

Mira: And it gives us a clearer picture of what we need to probe next—the specific way those vacancies order themselves spatially within that lattice structure is what the next step needs to be investigated in more detail.

Conclusion: Kai: So we’ve been looking at how adding oxygen changes these strontium niobanite materials, and now we’re getting to the final thoughts on this paper by insert authors here.

Mira: Yeah, they really nail the main point that it's not about just swapping out the strontium or neodymium atoms; it's actually the oxygen content that drives the whole structural shift.

Lev: From an error-correction standpoint, if we can control that oxygen nonstoichiometry precisely, it means we might be able to tune these materials to have specific magnetic states on demand.

Kai: Exactly. They show how increasing that oxygen content forces a change in the crystal structure from one layered shape to another, and this structural change is directly linked to the magnetic properties you see.

Mira: And what they really want us to see is that this isn't just some random change; it’s driven by the oxygen vacancies actually ordering themselves in a specific way across the material.

Lev: If that ordering happens at a long range, it could mean we have a path toward more stable and predictable magnetic behavior in these perovskites.

Kai: It seems like this work really boils down to proving that controlling the oxygen level gives us a handle on the fundamental physics of these cobaltites.

Mira: And their conclusion is that this oxygen vacancy ordering is what stabilizes the layered structure you see, which is a key piece of information for understanding how these materials behave under different conditions.

Lev: It opens up avenues for designing materials where you can predict whether you'll get a ferromagnetic state or something else based on the oxygen we put in there.

Kai: So the big implication is that tuning oxygen nonstoichiometry isn't just a minor tweak; it’s a major lever for controlling the phase and magnetic response of these cobaltite materials.

Mira: And they point out that this leads to different magnetic states, like some samples showing cluster glass behavior and others showing more itinerant electron behavior.

Lev: That means for real hardware, we need to figure out how robust those different magnetic states are when you introduce the structural disorder from those vacancies.

Kai: Next up, we’re going to look at what that specific long-range ordering of those oxygen vacancies looks like in more detail.

Nina Tereshko, Roman Lanovsky, Olivier Toulemonde, Maxim Bushinsky, Stanislav Savvin, Vadim Sikolenko, Lingyan Xu, Aleksandr Nikitin

Institute of Solid State and Semiconductor Physics Minsk Belarus · CNRS University de Bordeaux INP ICMB UMR 5026 Pessac France · Institut Laue-Langevin Grenoble France · Joint Institute for Nuclear Research Dubna Russia · Kant Baltic Federal University Kaliningrad Russia · Karlsruhe Institute of Technology Karlsruhe Germany · State Key Laboratory of Solidification Processing Xi’an People’s Republic of China

cond-mat.mtrl-sci

Submitted: 2026-07-11

Updated: 2026-11-04

Comments: 14 pages, 8 figures, 6 tables

Journal ref: Phys. Rev. B 114, 254402, 2026

DOI: 10.1103/h1p6-vpb4

License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/

Importance score: 77/100

The gist: Oxygen-nonstoichiometry-driven phase transition in Sr1−xNd xCoO3−δ (x = 0.1, 0.2, 0.3) perovskites reports a systematic study of how increasing oxygen content induces a structural transition and…

Key concepts

Oxygen Nonstoichiometry
This refers to having a non-ideal amount of oxygen in the cobalt oxide material. By intentionally changing the oxygen content (delta), researchers can force the material to undergo a structural transition and change its physical properties, which is central to this study.
Phase Transition
The material changes its crystal structure when oxygen content is increased. Specifically, it shifts from a layered I4/mmm structure to an oxygen-deficient orthorhombic Pmmm phase. This structural shift directly causes significant changes in the material's magnetic and electrical behavior.
Oxygen Vacancies
These are missing oxygen atoms within the crystal lattice of the cobaltite. The research strongly suggests that these vacancies, and how they are arranged (long-range ordering), are responsible for stabilizing the desired layered structure, rather than just changes in the strontium/neodymium ions.
Layered Structure Stabilization
The study concludes that the layered '314-type' structure is stabilized by oxygen vacancies and their ordering. This means that when oxygen is added, it organizes these vacancies into a specific pattern that locks the material into this lower-energy, layered configuration.

Terminology

Summary

Oxygen-nonstoichiometry-driven phase transition in Sr1−xNd xCoO3−δ (x = 0. p. 01, 0.2, 0.3) perovskites reports a systematic study of how increasing oxygen content induces a structural transition and changes in magnetic and transport properties in Sr1−xNd xCoO3−δ (x = 0. p. 01, 0.2, 0.3) perovskites. p. 0

Phase Transition Mechanism

The study reveals that increasing the oxygen content induces a structural transition from a layered I4/mmm (2ap × 2ap × 4ap) to an oxygen-deficient orthorhombic Pmmm (ap × ap × 2ap) phases with preferential oxygen-vacancy occupation. This transition is accompanied by a crossover from G-type antiferromagnetic with a weak ferromagnetic component to a ferromagnetic state, and a drastic decay in resistivity. p. 0 The stabilization of the layered “314” structure is driven by the presence and ordering of oxygen vacancies rather than A-site cation ordering. p. 0

Structural Analysis

High-resolution neutron powder diffraction combined with synchrotron x-ray powder diffraction reveals that increasing the oxygen content induces a structural transition from a layered I4/mmm (2ap × 2ap × 4ap) to an oxygen-deficient orthorhombic Pmmm (ap × ap × 2ap) phases with preferential oxygen-vacancy occupation. The crystal structure of these anion-deficient cobaltites is tetragonal I4/mmm with a 2ap × 2ap × 4ap unit cell, formed by alternating anion-deficient layers and oxygen-enriched octahedral CoO6 layers touching the apexes. p. 0 For the oxidized N2oxy sample, the pattern is described using the Pmmm space group model with ap × ap × 2ap unit cell. p. 3

Magnetic Evolution

The evolution of the magnetic and transport properties is discussed in terms of changes in the Co spin state, enhanced Co 3d–O 2p orbital overlap upon oxygen uptake, and a magnetically inhomogeneous ferromagnetic state associated with residual oxygen vacancies and mixed Co3+/Co4+ valence. The as-prepared N1 and N2 exhibit very low magnetization with a divergence between the ZFC and FC curves, which is characteristic of a G-type AFM structure with a small FM component. p. 6 All oxidized samples show a sharp magnetization rise, with TC increasing with Nd content, shifting from TC ≈ 160 K for N1oxy to TC ≈ 200 K for N3oxy. p. 6

Electrotransport Behavior

The resistivity of the as-prepared and oxidized series shows that oxygen index increase from 2.69 to 2.78 leads to a drastic decay in the resistivity values for N1. p. 8 The fact that N1oxy and N2oxy exhibit semiconductinglike resistivity behavior supports the mixed spin-state scenario (ii) as the most probable model. p. 8 The oxidized N3oxy compound is probably the only one in the whole series to which the itinerant electron model proposed by Bezdicka et al. p. 9 [25] should most likely be applied. p. 9

Conclusion

The results provide strong experimental support for the ideas proposed in Refs. [14, 15], asserting that the driving force for the stabilization of the layered “314-type” structure in cobaltites is the presence and longrange ordering of oxygen vacancies, rather than A-site cation ordering. p. 1 The oxidized series is characterized by the presence of FM cluster-glass behavior and orders-of-magnitude lower resistivity and higher magnetization values compared to the tetragonal analogues. p. 8 The magnetic properties can be understood in terms of the FM double-exchange operating within a magnetically inhomogeneous FM state, where residual oxygen vacancies and local structural distortions associated with the Nd3+ substitution and mixed Co3+/Co4+ valence and spin states produce spatial variations of the exchange interactions. p. 5 The authors conclude that the driving force for the stabilization of the layered “314-type” structure in cobaltites is the presence and longrange ordering of oxygen vacancies, rather than A-site cation ordering. p. 1

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Improved AI can perform systematic structural transition prediction by analyzing oxygen content effects on crystal structure, specifically predicting a transition from a layered I4/mmm phase to an oxygen-deficient orthorhombic Pmmm phase based on experimental data.

  2. Improved AI can distinguish between structural drivers by confirming that the stabilization of the layered “314” structure is driven by the presence and ordering of oxygen vacancies rather than A-site cation ordering.

  3. Improved AI can model magnetic evolution by predicting a crossover from G-type antiferromagnetic with a weak ferromagnetic component to a ferromagnetic state as oxygen content increases, based on changes in Co spin state.

  4. Improved AI can predict transport properties by correlating resistivity decay with structural transitions and the presence of residual oxygen vacancies, distinguishing between semiconductor-like behavior and metallic regimes for different samples.

  5. Improved AI can perform phase identification by analyzing high-resolution neutron powder diffraction data to confirm that the 314-type structure is stabilized by the presence and longrange ordering of oxygen vacancies.

  6. Improved AI can predict magnetic ordering outcomes by using symmetry analysis to determine the irreducible representations for the Co sites, identifying that in oxidized samples, a simple FM order with magnetic moments aligned along the a, b, and c axes is observed.

  7. Improved AI can model complex magnetic phenomena by predicting cluster glass behavior in M(T) curves and spatial variations of exchange interactions due to residual oxygen vacancies and mixed Co3+/Co4+ valence.

  8. Improved AI can predict conductivity type transitions by linking temperature-induced semiconductor to metal transitions to changes in Co-O bond angles, orbital overlap, and spin state transitions (from mixed LS/HS to a new IS-containing mixed spin state).

Related papers