Hybrid Dynamical Simulation Reveals Apparent Stiffening of Flexible Protein Lattices Driving Membrane Bending
Listen
Radio episode about this paper
Transcript
Introduction to the show: ident: Condensed Matter. The day in condensed matter: materials, phases and the measurements under them.
Kai: I'm Kai.
Mira: And I'm Mira, here with Lev.
Kai: We're looking at the paper: "Hybrid Dynamical Simulation Reveals Apparent Stiffening of Flexible Protein Lattices Driving Membrane Bending".
Mira: Here's the gist of the paper. Hybrid Dynamical Simulation Reveals Apparent Stiffening of Flexible Protein Lattices Driving Membrane Bending is a hybrid simulation framework that couples a particle-based flexible protein lattice to a continuum membrane model, enabling systematic investigation of how lattice geometry and rigidity influence dynamic membrane remodeling This work provides a validated framework for simulating how deformable, stable protein assemblies of diverse geometry couple to membrane dynamics and remodeling Coupling of Lattice Mechanics and Membrane Dynamics The study introduces a hybrid simulation framework that couples a particle-based flexible protein lattice to a continuum membrane model.
Kai: This coupling allows for the investigation of how lattice geometry and rigidity influence dynamic membrane remodeling.
Mira: The system involves representing proteins as rigid bodies coupled by harmonic potentials, where the energy function specifies bond lengths, angles, and dihedrals These microscopic parameters are associated with harmonic energy functions to allow for flexibility in the lattice structure.
Kai: Calibration of Lattice Rigidity Parameters The authors demonstrate how the connectivity and size of the lattice can strongly impact their apparent stiffness, κl,eff for driving membrane budding.
Title and authors: Kai: Let's talk a bit more about the title, "Hybrid Dynamical Simulation Reveals Apparent Stiffening of Flexible Protein Lattices Driving Membrane Bending." It’s a descriptive title, but it points directly to the core mechanism they are investigating.
Mira: The implication is that we’re seeing that these flexible protein lattices aren't just passive structures; their internal mechanics actively drive the bending of the membrane. It suggests a causal link where lattice geometry and rigidity dictate how much that membrane can bend or remodel.
Lev: I wonder if this means we need to focus our error correction efforts on accurately modeling these coupling terms because the dynamics are driven by this interaction, not just intrinsic protein motion or diffusion.
Kai: Right, so the paper is presenting a hybrid simulation framework designed to systematically investigate exactly how that lattice geometry and rigidity influence dynamic membrane remodeling. It’s about linking those microscopic details to the macroscopic bending behavior of the membrane.
Mira: The authors are doing this by coupling a particle-based flexible protein lattice with a continuum membrane model, which allows them to study these systems at biologically relevant length and time scales without getting bogged down in atomistic resolution.
Lev: I'm thinking about how they handle the dynamics here; they use the rigid-body Brownian dynamics for the proteins handled by hoomdblue and propagate the membrane in Fourier space using their own Python code. That separation of propagation methods is important for understanding where computational overhead lands when you try to run this on real hardware.
Kai: It’s that separation, right? The rigid body Brownian dynamics and the Fourier space membrane propagation, which they couple through external force terms between the equations. This means they are trying to handle the complex dynamics of both components simultaneously.
Mira: And from a theorist's view, this coupling is what allows them to examine the relationship between microscopic energy parameters and emergent lattice mechanics directly, which is a big deal for understanding how these things emerge.
Lev: It’s that direct examination that's valuable because it lets you see how those specific bond parameters like sigma, theta one, and theta two translate into macroscopic mechanical properties like kappa l eff.
Kai: So they are essentially proving the connection between those microscopic energy function parameters and the emergent lattice mechanics through these simulations. It’s about showing that this linkage exists quantitatively.
Mira: And they also use this to validate theoretical predictions for membranes under increasing tension, which adds another layer of confirmation to their findings, showing that their simulation results align with what simplified theory predicts for curvature deviation.
Lev: The alignment with theory is important, but we still have that issue where high tension systems seem not to deform as much as the simplified theory suggests. That’s a point where the model might need refinement if we want to predict those high tension scenarios accurately.
Kai: So it seems they’ve established a quantitative link between coarse-grained interaction parameters and emergent lattice mechanics through this hybrid simulation framework, setting the stage for studying how these things influence membrane deformation during early cellular remodeling processes.
Mira: And the next thing we need to discuss is exactly what this paper actually found regarding that connection. It moves beyond just describing the setup to showing what it actually computes.
Lev: Let's look at the summary of their findings in more detail, because it’s where they show their main results.
The paper's summary: Kai: Okay, so the summary boils down to this: they demonstrate that the connectivity and size of a lattice can strongly impact its apparent stiffness, kappa l eff for driving membrane budding. They found that this effective rigidity is not constant; it actually increases as the lattice grows and becomes more internally connected.
Mira: That’s a key point because it moves away from the idea of a single constant stiffness throughout the assembly process, showing structural differences can significantly alter how much stiffness you infer from membrane-bending behavior. They map those microscopic parameters to this emergent rigidity in two ways, including the apparent observed rigidity of inducing a spherical membrane cap parameterized by kappa l eff.
Lev: So they’re saying that for instance, if you look at the system as a whole, you see how internal connectivity and size are driving that stiffness up. That’s a structural effect overriding what you might expect from just looking at one bond in isolation.
Kai: And then they quantify it using buckling-based deformation of pre-assembled clathrin lattices to determine kappa l flex, which characterizes the meso-scale rigidity of the clathrin coat by fitting force versus strain data to a theoretical curve.
Mira: The comparison between these two measurements is interesting because for the open cap configuration, their measured kappa l eff is very nearly in agreement with the flexural rigidity kappa l flex measured via buckling. But for the closed cap simulations, their inferred value of kappa l eff is more than an order of magnitude larger in all cases.
Lev: That huge difference in numbers points back to that issue we talked about earlier—the Helfrich-like energy functions might not fully capture shear rigidity in solid-like thin-sheet assemblies.
Kai: So, the conclusion here is that they’ve established a quantitative connection between coarse-grained interaction parameters and emergent lattice mechanics, showing how those parameters translate into measurable mechanical properties.
Mira: And it’s important to remember this is done within a hybrid simulation framework, which has its own limitations, like the usage of the small-gradient approximation of the Helfrich functional which only works for shapes with modest gradients.
Lev: That limitation means they can't really model strongly curved membranes because that’s where you need something more complex than this simplified model.
The paper's improvements: Kai: So, shifting to the suggested improvements, the paper suggests a few things to make the framework more robust. First, they want a precise determination of effective lattice rigidity for spherical bud formation to better quantify how it increases as the lattice grows by correlating coarse-grained interaction parameters directly to emergent mechanical properties.
Mira: They also suggest validating simplified continuum models against structural details by measuring how the elastic response changes as the lattice bends, specifically identifying when structural differences can significantly alter the apparent stiffness inferred from membrane-bending behavior.
Lev: From an engineering standpoint, that means they want to ensure that if you rely on a single fixed coarse-grained continuum rigidity, it’s valid across different lattice configurations.
Kai: And they want to use buckling simulations to calibrate microscopic parameters like sigma, theta one and theta two to reproduce experimentally measured rigidity values like kappa l flex. This would provide a direct link between those microscopic energy parameters and the emergent lattice mechanics.
Mira: That calibration step is crucial because it bridges the gap between theory and experiment by linking those fundamental structural parameters to the measurable mechanical properties.
Lev: And they also mentioned including steric repulsion between the membrane and center of gravity binding sites as a way to improve accuracy in modeling those boundary conditions.
Kai: So, if you look at these suggestions, it’s about getting more precise calibration for the lattice stiffness and handling different curvatures better with better physical interactions.
Conclusion: Mira: To wrap up, this paper has established a quantitative connection between coarse-grained interaction parameters and emergent lattice mechanics by showing how those parameters translate into measurable mechanical properties like effective bending rigidity.
Kai: It shows that the lattice structure matters a lot, as the internal connectivity and size drive that apparent stiffness up over time, which is a key finding for understanding protein remodeling processes.
Lev: For us on the hardware side, it’s about understanding that if you want to run this on real hardware you need to know where the overhead really lands when you try to run these coupled dynamics.
Mira: And looking ahead, we should focus on using this framework for applications that require strongly curved membranes and look into incorporating steric repulsion and more robust models for those challenging geometries.
Kai: So, the hybrid simulation framework presented in "Hybrid Dynamical Simulation Reveals Apparent Stiffening of Flexible Protein Lattices Driving Membrane Bending" provides a way to systematically investigate how lattice geometry and rigidity influence dynamic membrane remodeling.
Lev: It gives us a computational pipeline that spans from experimentally determined structural data to reaction-diffusion simulations of self-assembly and subsequent membrane remodeling, which is really useful for connecting all those different simulation stages together.
Mira: It’s a solid piece of work that establishes a quantitative connection between coarse-grained interaction parameters and emergent lattice mechanics through this hybrid simulation framework.
Kai: That's the picture for this paper, linking microscopic details to macroscopic behavior, and it sets up a clear direction for how we can push those simulations further.
Samuel L. Foley, Margaret E. Johnson
Department of Biophysics, Johns Hopkins University
cond-mat.soft, physics.bio-ph, physics.comp-ph
Submitted: 2026-07-07
Updated: 2026-10-27
Comments: Manuscript: 14 pages, 8 figures. SI: 7 pages, 7 figures
Code: https://github.com/PhysFoley/BrownianProteinFSBDmem
License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/
Importance score: 85/100
The gist: Hybrid Dynamical Simulation Reveals Apparent Stiffening of Flexible Protein Lattices Driving Membrane Bending is a hybrid simulation framework that couples a particle-based flexible protein lattice…
Key concepts
- Hybrid Simulation Framework
- This method combines two different simulation approaches: one for the flexible protein structure (particle-based) and another for the surrounding membrane (continuum model). This allows researchers to see how the microscopic interactions of proteins directly influence the macroscopic shape and dynamics of a biological membrane.
- Effective Lattice Rigidity ($εl_{\text{eff}}$)
- This is a calculated measure of how stiff the protein lattice appears when it drives membrane bending. The study shows this rigidity is not constant; it grows as the lattice gets larger and more connected, meaning the apparent stiffness depends heavily on the specific structure of the protein assembly.
- Buckling-Based Deformation Protocol
- This is a technique used to measure a specific type of rigidity ($εl_{\text{flex}}$) by forcing the lattice into a compressed state. By analyzing how much it deforms under this force, researchers can calculate the meso-scale rigidity associated with the clathrin coat.
- Small-Gradient Approximation
- This is a mathematical simplification used in modeling membrane energy. It assumes that membrane shapes are only slightly curved, which is valid for early stages of vesicle formation. However, it limits the model's ability to accurately describe very large or strongly curved deformations.
Terminology
Summary
Hybrid Dynamical Simulation Reveals Apparent Stiffening of Flexible Protein Lattices Driving Membrane Bending is a hybrid simulation framework that couples a particle-based flexible protein lattice to a continuum membrane model, enabling systematic investigation of how lattice geometry and rigidity influence dynamic membrane remodeling This work provides a validated framework for simulating how deformable, stable protein assemblies of diverse geometry couple to membrane dynamics and remodeling
Coupling of Lattice Mechanics and Membrane Dynamics
The study introduces a hybrid simulation framework that couples a particle-based flexible protein lattice to a continuum membrane model. This coupling allows for the investigation of how lattice geometry and rigidity influence dynamic membrane remodeling. p. 0 The system involves representing proteins as rigid bodies coupled by harmonic potentials, where the energy function specifies bond lengths, angles, and dihedrals These microscopic parameters are associated with harmonic energy functions to allow for flexibility in the lattice structure. p. 1
Calibration of Lattice Rigidity Parameters
The authors demonstrate how the connectivity and size of the lattice can strongly impact their apparent stiffness, κl,eff for driving membrane budding. They map the parameters of the elastic energy function to emergent lattice rigidity in two ways, including the apparent observed rigidity of inducing a spherical membrane cap parameterized by κl,eff. p. 0 A key finding is that this effective rigidity is not constant but increases as the lattice grows and becomes more internally connected Structural differences like partial connectivity or asymmetry can significantly alter the apparent stiffness inferred from membrane-bending behavior. p. 1
Measurement of Apparent Rigidity via Buckling
The flexural rigidity, κl,flex, is quantified using a buckling-based deformation protocol where the lattice is forced into a projected length Lx < L. The bending modulus κl characterizes the meso-scale rigidity of the clathrin coat and is determined by fitting force-vs. p. 4-strain data to a theoretical curve derived from an energy in Eqn. p. 4 (11). This method allows for the extraction of an apparent rigidity associated with membrane deformation. p. 1
Effective Rigidity and Structural Dependence
The effective bending rigidity, κl,eff, is inferred by simulating partially-assembled spherical clathrin lattices adhered to membranes of varying rigidity. The results show that for the open cap configuration, the measured κl,eff is very nearly in agreement with the flexural rigidity κl,flex measured via buckling. p. 6 However, for the closed cap simulations, the inferred value of κl,eff is more than an order of magnitude larger in all cases. p. 6 This discrepancy is attributed to the fact that Helfrich-like energy functions may not fully capture shear rigidity in solid-like thin-sheet assemblies like clathrin lattices. p. 6
Limitations and Future Directions
A limitation of the modeling framework stems from the usage of the small-gradient approximation of the Helfrich functional, which is only rigorously valid for membrane shapes with modest gradients. This approximation does not allow for spontaneous curvature, which would naturally lead to large membrane height gradients over large length scales. p. 9 For applications requiring strongly curved membranes, more robust computational models like Finite Element Method-based approaches must be employed. p. 9 The inclusion of steric repulsion between the membrane and CG binding sites is suggested as a potential avenue for improvement. p. 9
Transfer to Reaction-Diffusion Simulations
A scripted pipeline has been developed to convert the structural output of any NERDSS simulation into a ready-to-simulate input for their coupled flexible protein-membrane simulation framework. This allows for the examination of how protein lattice rigidity influences induced membrane curvature, both via intrinsic microscopic bond rigidity and lattice geometry. p. 8 The framework provides a computational pipeline spanning experimentally-determined structural data, reaction-diffusion simulation of selfassembly, and subsequent membrane remodeling. p. 1
Overall Significance
The principal advantage of the present framework is its computational efficiency and ease of use, particularly given the mature and well-established FSBD algorithm. It enables the systematic investigation of how molecular-scale binding interactions and lattice mechanics influence membrane deformation during the earliest stages of cellular remodeling processes. p. 0 The work establishes a quantitative connection between coarse-grained interaction parameters and emergent lattice mechanics. p. 1 The model occupies a powerful middle ground by enabling simulations over biologically relevant length and time scales while retaining a direct connection to experimentally-informed CG protein models. p. 0 The data that support the findings of this study are available within the article and all code necessary to reproduce the results are freely available at github. p. 5com/PhysFoley/BrownianProteinFSBDmem
--- Page 1 ---
Hybrid Dynamical Simulation Reveals Apparent Stiffening of Flexible Protein Lattices Driving Membrane Bending
Samuel L. Foley1, a) and Margaret E. p. 0 Johnson2, b)
1)T. C. Jenkins Department of Biophysics, Johns Hopkins University, Baltimore, Maryland, USA
2)T. C. Jenkins Department of Biophysics, Johns Hopkins University, Baltimore, Maryland, USA
(Dated: 28 July 2026)
--- Page 2 ---
more efficient approach is to replace explicit diffusing lipids with a surface-based description of the membrane, using either a continuum mesh20–25 or a bead-spring surface26–31. In the present work, we employ a continuum membrane model that is both computationally efficient and directly parameterized by experimentally measurable membrane properties, including bending rigidity and tension32. p. 1 By propagating the membrane in Fourier space, the model can also account for hydrodynamic effects efficiently. p. 1 The key limitation of this Fourierspace Brownian dynamics (FSBD) formulation is that it is valid only in the small-gradient limit of the Helfrich functional33,34. p. 1 We therefore focus on the early stages of vesicle formation, before strongly curved omega-shaped deformations develop. p. 1 Although FSBD has previously been used with proteins represented either as a continuum or as individual particles, here we couple it to flexible, particle-based elastic lattices. p. 1
--- Page 3 ---
Individual proteins (monomers) are rigid bodies consisting of a center of mass (COM) site along with binding sites to which other proteins may associate. The pucker angle α encodes a particular monomer curvature preference (conventionally measured from the vertical such that α = 90◦ yields a flat structure). p. 1 In NERDSS, protein-protein association is parametrized by a set of geometric parameters that fully determine the rigid-body structure of the bound pair To allow protein complexes defined by these rigid bond parameters to be flexible, we associate to each parameter a harmonic energy Ux = 1/2 kx(x − x0)2, (1) where x can be any of σ, θ, ω, or ϕ A flexible protein assembly simulation therefore requires a rigidity parameter for each distinct parameter of each unique bond type present in the complex. p. 2
--- Page 4 ---
The rotational degrees of freedom for each rigid body, encoded in a rotation quaternion qi, obey an equivalent equation: dqi/dt = 1/γr,i (τnet,i + τR,i), (3) where the τ quantities are torques and γr is the rotational drag coefficient related to the corresponding rotational diffusion constant Dr = kBT /γr. For our clathrin monomers, we use the values D = 13 µm2/s and Dr = 0. p. 303 rad2/µs as in previous studies43
--- Page 5 ---
We will consider only membranes which exhibit small deviation away from flatness, so that we may employ the small-gradient approximation of the Helfrich energy functional. The membrane shape will be parametrized by its height h(x, y) above some arbitrary base plane, in terms of which our small-gradient energy can be written as E = 1/2 ∫R squared 1/2 κm∇ 2h squared + 1/2 Σ (∇h) squared dxdy
--- Page 6 ---
The Monge-gauge equation of motion for a membrane whose energy is given by Eqn. (5) in the over-damped regime is ∂h(x, y)/∂t = 1/8πηr − r' f(r', t)dx'dy', (6) where f(r, t) is the local force per unit area in the zdirection, r = xxˆ + yyˆ is the position in the 2D plane, and η is the viscosity of the embedding solvent The coupling between rigid-body proteins (whose propagation is handled by HOOMD-blue) and our Fourier-space membrane (propagated by our own code) is accomplished through the external force term in each corresponding equation.
--- Page 7 ---
For each spring connecting a protein to the membrane, the appropriate third-law force pairs are included in Eqns. (9), (2), and (3) This discrete realspace representation of the force per unit area is Fourier transformed at each timestep using SciPy’s FFT library to acquire the amplitudes fext,q in Eqn. p. 3 p. 3 (9).
--- Page 8 ---
By requiring that ξq(t) satisfy the appropriate fluctuation-dissipation theorem, we can determine its power spectrum: ⟨ξq(t)ξ∗q(t')⟩ = 8ηqkBT δ(t − t') We then integrate our equation of motion Eqn. (9) using a simple Euler scheme with timestep ∆t, wherein our random force at each time step is determined by integrating ξq over our finite timestep interval, yielding a Gaussian of variance 2kBT ∆t/4ηq
--- Page 9 ---
The coupling between the rigid-body proteins (whose propagation is handled by HOOMD-blue) and our Fourier-space membrane (propagated by our own code) is accomplished through the external force term in each corresponding equation.
--- Page 10 ---
For each spring force F on the membrane, we apply a force per unit area f = F/(L/N) squared to the corresponding discrete patch of membrane over which the spring acts, as indicated in Fig. 1a. This discrete realspace representation of the force per unit area is Fourier transformed at each timestep using SciPy’s FFT library to acquire the amplitudes fext,q in Eqn. (9).
--- Page 11 ---
The results are shown in Fig. 5
--- Page 12 ---
The identity line shows where points would fall if both methods yielded identical rigidity values
--- Page 13 ---
We will refer to the effective bending rigidity, κl,eff as determined from the zerotension fits in Fig. 5a The agreement between the predicted curvature deviation under tension and the simulation measurements is good, although the high tension systems seem to not deform to the extent predicted by the simplified theory
--- Page 14 ---
The results are shown in Fig. 5a Also plotted in this figure are the theoretical predictions for the equilibrium curvature radius as calculated from Eqn. p. 6 p. 6 p. 6 p. 6 p. 6 p. 6 p. 6 p. 6 p. 6 p. 6 (16).
--- Page 15 ---
We used the value of κl,eff as determined from the zerotension fits in Fig. 5a. The agreement between the predicted curvature deviation under tension and the simulation measurements is good, although the high tension systems seem to not deform to the extent predicted by the simplified theory
--- Page 16 ---
The results are shown in Fig. 5a Also plotted in this figure are the theoretical predictions for the equilibrium curvature radius as calculated from Eqn. (16)
--- Page 17 ---
We used the value of κl,eff as determined from the zerotension fits in Fig. 5a. The agreement between the predicted curvature deviation under tension and the simulation measurements is good, although the high tension systems seem to not deform to the extent predicted by the simplified theory
--- Page 18 ---
The results are shown in Fig. 5a Also plotted in this figure are the theoretical predictions for the equilibrium curvature radius as calculated from Eqn. (16)
--- Page 19 ---
We used the value of κl,eff as determined from the zerotension fits in Fig. 5a. The agreement between the predicted curvature deviation under tension and the simulation measurements is good, although the high tension systems seem to not deform to the extent predicted by the simplified theory
--- Page 20 ---
The results are shown in Fig. 5a Also plotted in this figure are the theoretical predictions for the equilibrium curvature radius as calculated from Eqn. (16)
--- Page 21 ---
We used the value of κl,eff as determined from the zerotension fits in Fig. 5a. The agreement between the predicted curvature deviation under tension and the simulation measurements is good, although the high tension systems seem to not deform to the extent predicted by the simplified theory
--- Page 22 ---
The results are shown in Fig. 5a Also plotted in this figure are the theoretical predictions for the equilibrium curvature radius as calculated from Eqn. (16)
--- Page 23 ---
We used the value of κl,eff as determined from the zerotension fits in Fig. 5a. The agreement between the predicted curvature deviation under tension and the simulation measurements is good, although the high tension systems seem to not deform to the extent predicted by the simplified theory
--- Page 24 ---
The results are shown in Fig. 5a Also plotted in this figure are the theoretical predictions for the equilibrium curvature radius as calculated from Eqn. (16)
--- Page 25 ---
We used the value of κl,eff as determined from the zerotension fits in Fig. 5a. The agreement between the predicted curvature deviation under tension and the simulation measurements is good, although the high tension systems seem to not deform to the extent predicted by the simplified theory
--- Page 26 ---
The results are shown in Fig. 5a Also plotted in this figure are the theoretical predictions for the equilibrium curvature radius as calculated from Eqn. (16)
--- Page 27 ---
We used the value of κl,eff as determined from the zerotension fits in Fig. 5a. The agreement between the predicted curvature deviation under tension and the simulation measurements is good, although the high tension systems seem to not deform to the extent predicted by the simplified theory
--- Page 28 ---
The results are shown in Fig. 5a Also plotted in this figure are the theoretical predictions for the equilibrium curvature radius as calculated from Eqn. (16)
--- Page 29 ---
We used the value of κl,eff as determined from the zerotension fits in Fig. 5a. The agreement between the predicted curvature deviation under tension and the simulation measurements is good, although the high tension systems seem to not deform to the extent predicted by the simplified theory
--- Page 30 ---
The results are shown in Fig. 5a Also plotted in this figure are the theoretical predictions for the equilibrium curvature radius as calculated from Eqn. (16)
--- Page 31 ---
We used the value of κl,eff as determined from the zerotension fits in Fig. 5a. The agreement between the predicted curvature deviation under tension and the simulation measurements is good, although the high tension systems seem to not deform to the extent predicted by the simplified theory
--- Page 14 ---
The results are shown in Fig. 5a Also plotted in this figure are the theoretical predictions for the equilibrium curvature radius as calculated from Eqn. (16)
Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.
Improvements for AI systems
-
Precise determination of effective lattice rigidity for spherical bud formation: The improved system can quantify how
the effective rigidity relevant for spherical bud formation increases as the lattice grows
by correlating coarse-grained interaction parameters directly to emergent mechanical properties, moving beyond assuming a single constant stiffness throughout assembly. -
Validation of simplified continuum models against structural details: The AI can test whether the approximation of a single fixed coarse-grained continuum rigidity is valid by measuring
how the elastic response changes as the lattice bends,
specifically identifying whenstructural differences can significantly alter the apparent stiffness inferred from membrane-bending behavior.
-
Prediction of tension effects on curvature: The system can predict how membrane tension influences the spherical cap's curvature using Eqn. (16), allowing for a quantitative assessment of how
increasing the membrane tension Sigma has the result of effectively stiffening the membrane, as its contribution is added directly to kappa m.
-
Structure-informed parameter calibration: The improved system can use buckling simulations to calibrate microscopic parameters, such as
kσ, kθ, and kω,
to reproduce experimentally measured rigidity values like kappa l flex (κl flex), providing a direct link betweenmicroscopic energy parameters and emergent lattice mechanics.
-
Transfer of arbitrary structural data: The AI can automate the conversion of any pre-existing reaction-diffusion simulation output into a
ready-to-simulate input
for the coupled framework, enabling the study of diverse geometries like HIV-1 Gag lattices without manual parameter entry.
Sources
- Beads, springs and fields: particle-based vs continuum models in cell biophysics
- Shapes of fluid membranes with chiral edges
Related papers
- Coarse-graining dense, deformable active particles
- Three-body corrections to the Brownian viscosity of hard spheres without hydrodynamic interactions
- Thin active nematohydrodynamic layers: asymptotic theories and instabilities
- Origins of suppressed self-diffusion of nanoscale constituents of a complex liquid
- Soft material mechanical property degradation at high strain rates
- Avalanche criticality emerges by thermal fluctuation in a quiescent glass