Self-consistent field theory of semiflexible nematics: Density-nematic coupling, anisotropic elasticity, and defect core sizes

arXiv:2606.31009 · cond-mat.soft · Submitted 2026-06-30 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Condensed Matter. The day in condensed matter: materials, phases and the measurements under them.

Kai: We're looking at the paper: "Self-consistent field theory of semiflexible nematics".

Mira: Here's the gist of the paper. Self-consistent field theory of semiflexible nematics: Density–nematic coupling, anisotropic elasticity, and defect core sizes is a study that develops a microscopic framework using self-consistent field theory to investigate the linear response of wormlike chains in lyotropic nematic phases, which is important because it provides a unified description for density-nematic order coupling and elastic properties The linear response of wormlike chains in the nematic phase is studied by self-consistent field theory Our results show that strong density–nematic degree of order coupling can destabilize the nematic state.

Kai: The Frank elastic constants and the correlation lengths are obtained from a linear response analysis based on the self-consistent field theory free energy.

Mira: Increasing flexibility strongly suppresses twist and bend elasticity while affecting splay elasticity comparatively weakly, leading to a crossover from bend-dominated to splay-dominated elasticity.

Kai: The correlation lengths and Frank elastic anisotropy obtained from the linear response analysis explain well director profiles around a +1/2 disclination core, including the core size.

Paper summary: Kai: Looking at the whole thing, this paper is really about linking the microscopic stuff—the flexibility of a chain—to the macroscopic properties we observe in these liquid crystals <ref:2606.31009#pg1>.

Mira: The core message is that density and nematic order are strongly coupled, and this coupling can destabilize the nematic phase entirely, depending on how those two things interact <ref:2606.31009#pg1>.

Lev: From an engineering standpoint, this tells us that if we're building devices based on these systems, we have to account for that density fluctuation feedback loop when designing stability parameters <ref:2606.31009#pg2>.

Kai: The title itself really captures the scope—it covers density coupling, anisotropic elasticity, and those defect core sizes that are so important for how the material behaves in real space <ref:2606.31009#pg1>.

Mira: It provides a microscopic framework where you can see how continuum properties emerge from the statistics of individual chains <ref:2606.31009#pg1>.

Lev: The implication is that we might be able to derive the Landau-de Gennes type gradient free energy directly from this self-consistent field theory, which would be a big step for connecting theory to practical material design <ref:2606.31009#pg2>.

Kai: Right. So it’s about taking these detailed microscopic chain descriptions and seeing how they map onto the continuum physics we use every day <ref:2606.31009#pg1>.

Conclusion: Kai: So, we're wrapping up this look at the paper titled "Self-consistent field theory of semiflexible nematics: Density–nematic coupling, anisotropic elasticity, and defect core sizes."

Mira: It’s a deep dive into how you link the microscopic flexibility of these chain molecules to the big picture stuff like density and how they move together.

Lev: The authors are using self-consistent field theory to model wormlike chains in lyotropic nematic phases, which is pretty specific work.

Kai: Exactly. They’re setting up a framework to see how the density of segments and the nematic order parameter are coupled, and how that coupling messes with the elastic properties of the material.

Mira: The main finding is that strong density-nematic coupling can actually destabilize the nematic state, which is pretty counterintuitive because you usually expect order to stabilize things.

Lev: That needs to be tested on real hardware because if this coupling drives a phase transition, it changes how we design those liquid crystal displays or optical components.

Kai: And they got some concrete numbers on the elastic constants and correlation lengths from this linear response analysis, which is what they did using the free energy description.

Mira: They found that when you increase flexibility of the chain, it really suppresses the twist and bend elasticity a lot, but splay elasticity doesn't change as much.

Lev: That crossover point where bend dominance switches to splay dominance is important because it dictates how you’d have to tune the physical parameters for a system to behave in one way or another.

Kai: They also explained how the correlation lengths and the elastic anisotropy they got map onto director profiles around a +one-half disclination core, including how big that core actually is.

Mira: The authors found that this characteristic defect core size scales roughly linearly with the nematic correlation length, which aligns with what Landau-de Gennes theory predicted.

Lev: That scaling relationship is the key link here, suggesting that the structure of these defects isn't just random; it’s tied directly to how ordered the material is at its equilibrium.

Kai: It’s a microscopic framework connecting molecular flexibility, density coupling, and defect structure in one unified theory.

Mira: The implication for me is that we might be able to derive the Landau-de Gennes type gradient free energy directly from this self-consistent field theory.

Lev: If they can do that, it means you don't have to rely on phenomenological models for how density variations affect elasticity; you can calculate it from first principles.

Kai: That moves us closer to a unified description of how these systems behave under different conditions than just the uniform ones they studied.

Mira: This work opens up new avenues for incorporating density variations into existing nematic theories, especially for lyotropic systems where those two factors are so important.

Lev: We should look at how this framework handles the spinodal limits; understanding when the system becomes unstable is crucial for any practical realization of these materials.

Kai: Next time, we're going to look at how these microscopic results translate into actual experimental measurements on real samples.

Longyu Qing, Jorge Viónals

University of Minnesota

cond-mat.soft

Submitted: 2026-06-30

Updated: 2026-11-09

Comments: 21 pages, 8 figures

License: http://creativecommons.org/licenses/by/4.0/

Importance score: 86/100

The gist: Self-consistent field theory of semiflexible nematics: Density–nematic coupling, anisotropic elasticity…

Key concepts

Self-consistent field theory (SCFT)
A microscopic framework used to investigate the linear response of wormlike chains in nematic phases. It models the system by defining a density field for chain segments and an order parameter for nematic orientation, allowing researchers to calculate collective properties from microscopic interactions.
Density–nematic coupling
The strong interaction between how densely packed the polymer chains are (density) and the degree of orientational order in the liquid crystal phase (nematic order). The study shows this coupling can destabilize the nematic state under certain conditions.
Frank elastic constants
These constants describe how much energy is required to distort a nematic director field, characterizing its anisotropic elasticity. The paper derives these from a linear response analysis based on the SCFT free energy, revealing how flexibility changes this response.
Defect core size scaling
The characteristic size of topological defects in the nematic structure is found to scale approximately linearly with the nematic correlation length ($\xi_Q$). This scaling aligns with predictions from Landau–de Gennes theory, linking microscopic chain statistics to macroscopic defect structure.

Terminology

Summary

Self-consistent field theory of semiflexible nematics: Density–nematic coupling, anisotropic elasticity, and defect core sizes is a study that develops a microscopic framework using self-consistent field theory to investigate the linear response of wormlike chains in lyotropic nematic phases, which is important because it provides a unified description for density-nematic order coupling and elastic properties

The linear response of wormlike chains in the nematic phase is studied by self-consistent field theory Our results show that strong density–nematic degree of order coupling can destabilize the nematic state. p. 0

Where the paper says it

An effective free energy description for uniform nematic states is constructed in terms of the chain segment density and uniaxial nematic order parameter, providing a unified framework for density–degree of order coupling, isotropic-nematic coexistence, and the limit of stability of the nematic phase. Our results show that strong density– nematic degree of order coupling can destabilize the nematic state.

The Frank elastic constants and the correlation lengths are obtained from a linear response analysis based on the self-consistent field theory free energy. p. 0
Where the paper says it

In contrast, director distortions couple to density and nematic order variations only at higher order, remaining effectively decoupled in the linear response regime. The Frank elastic constants and the correlation lengths are obtained from a linear response analysis based on the self-consistent field theory free energy.

p. 0
Where the paper says it

In contrast, director distortions couple to density and nematic order variations only at higher order, remaining effectively decoupled in the linear response regime. The Frank elastic constants and the correlation lengths are obtained from a linear response analysis based on the self-consistent field theory free energy.

Increasing flexibility strongly suppresses twist and bend elasticity while affecting splay elasticity comparatively weakly, leading to a crossover from bend-dominated to splay-dominated elasticity. p. 0
Where the paper says it

The Frank elastic constants and the correlation lengths are obtained from a linear response analysis based on the self-consistent field theory free energy. Increasing flexibility strongly suppresses twist and bend elasticity while affecting splay elasticity comparatively weakly, leading to a crossover from bend-dominated to splay-dominated elasticity.

p. 0
Where the paper says it

The Frank elastic constants and the correlation lengths are obtained from a linear response analysis based on the self-consistent field theory free energy. Increasing flexibility strongly suppresses twist and bend elasticity while affecting splay elasticity comparatively weakly, leading to a crossover from bend-dominated to splay-dominated elasticity.

The correlation lengths and Frank elastic anisotropy obtained from the linear response analysis explain well director profiles around a +1/2 disclination core, including the core size. p. 0
Where the paper says it

Increasing flexibility strongly suppresses twist and bend elasticity while affecting splay elasticity comparatively weakly, leading to a crossover from bend-dominated to splay-dominated elasticity. The correlation lengths and Frank elastic anisotropy obtained from the linear response analysis explain well director profiles around a +1/2 disclination core, including the core size.

p. 0
Where the paper says it

Increasing flexibility strongly suppresses twist and bend elasticity while affecting splay elasticity comparatively weakly, leading to a crossover from bend-dominated to splay-dominated elasticity. The correlation lengths and Frank elastic anisotropy obtained from the linear response analysis explain well director profiles around a +1/2 disclination core, including the core size.

SCFT Framework for Wormlike Chains

The SCFT framework for semiflexible nematics is briefly summarized by modeling them as wormlike chains with Maier–Saupe (MS) interactions The microscopic density of segment positions and orientations is defined as a specific expression involving the chain contour length and persistence length. The Hamiltonian of the system without external fields includes terms for bending energy and pairwise segment interactions defined by the interaction kernel. p. 1

Where the paper says it

The Hamiltonian of the system without external fields is given by βH0 = lp 2 Xn i=1 Z L 0 ds dui ds 2 + 1 2 Z dr dr ′ du du ′ ρˆ(r, u)VI (r, r ′ ; u, u ′ )ˆρ(r ′ , u ′ ), (2) where β = 1/(kBT), with kB the Boltzmann constant. The first term represents the bending energy of individual chains, while the second term accounts for pairwise segment interactions.

An external field is introduced via a linear coupling to the density field. p. 1
Where the paper says it

Its value depends on solution conditions such as solvent quality, salt concentration, and temperature, with good solvents generally corresponding to larger effective repulsion and poor solvents to weaker repulsion. An external field is introduced via a linear coupling to ρˆ(r, u), βHext = Xn i=1 Z L 0 ds v(ri(s), ui(s)) = Z dr du v(r, u)ˆρ(r, u).

Effective Free Energy Description

An effective free energy description for uniform nematic states is constructed in terms of the chain segment density and uniaxial nematic order parameter. The MS interaction contribution in Eq. p. 2

Where the paper says it

Finally, restricting the theory to uniform uniaxial states reduces the free energy to a function of the ρ and S. The MS interaction contribution in Eq.

(6) to the free energy is completely determined by the coarse grained fields ρ(r) and Qij (r). p. 2
Where the paper says it

The MS interaction contribution in Eq. (6) to the free energy is completely determined by the coarse grained fields ρ(r) and Qij (r), 1 2 R dr(u0ρ 2 − 3 2 u2QijQij ), where repeated tensor indices imply summation throughout the paper.

The effective free energy density is given by βfeff(ρ, S) = ρ/L ln ρv0 L + 1/2 u0ρ squared + ρ/L h g(S;L/lp) − α squared S 2i. p. 3
Where the paper says it

The free energy contribution of e −w0L cancels exactly with the term involving w ∗ 0ρ in the first term of Eq. Using the relation w ∗ Q(S), w ∗ Q can be eliminated in favor of S, thereby expressing the effective free energy density in terms of ρ and S, βfeff(ρ, S) = ρ L ln ρv0 L + 1 2 u0ρ 2+ ρ L h g(S;L/lp) − α 2 S 2 i , (19) where α = u2ρL = nL2u2/V can be interpreted as the effective strength of the alignment interaction.

This form shows that ρ and S are coupled in two ways, where the prefactor rho/L = n/V indicates that the free energy density is a sum over single chain contributions. p. 3
Where the paper says it

The effective free energy form shows that ρ and S are coupled in two ways. First, the prefactor ρ/L = n/V indicates that the free energy density is a sum over single chain contributions.

Elastic Response and Coupling

Frank elastic constants are obtained from the director response by varying the wavevector magnitude k and computing χi(k). In the nematic phase, variations in ρ and S exhibit strong coupling, where AρQ and KρQ are both negative, implying that the system energetically favors in a certain configuration. p. 9

Where the paper says it

In the nematic reference state, the off-diagonal elements of M(k) are comparable in magnitude to the diagonal ones, indicating strong density–nematic degree of order coupling. Moreover, AρQ and KρQ are both negative, implying that the system energetically favors in

The soft mode eigenvalue is dominated by the mode with the smaller eigenvalue, λ−(k), which is referred to as the soft mode. p. 7
Where the paper says it

The corresponding eigenvalues are λ±(k) = 1 2 Mρρ + MQQ ± q (Mρρ − MQQ) 2 + 4M2 ρQ . (43) The collective behavior is dominated by the mode with the smaller eigenvalue, λ−(k), referred to as the soft mode.

This soft mode characterizes the collective responses of the coupled system. p. 7
Where the paper says it

The correlation length ξ ∥,⊥ − characterizes the spatial scale of the soft mode, governing the decay of the coupled modes. While the soft mode characterizes the collective responses of the coupled system, the quantity most directly accessed in simulations and experiments is Q.

Topological Defects and Core Size

The characteristic core size obtained from SCFT calculations scales approximately linearly with the correlation length ξQ, in agreement with Landau–de Gennes predicted scaling. The core radius on the side where the gradient is parallel to n, denoted r∥, is significantly larger than that on the side where the gradient is perpendicular to n, denoted r⊥. p. 9

Where the paper says it

In contrast, the uniform nematic state possesses a spontaneously chosen director n, leading to an anisotropic response that depends on the orientation of k relative to n. Accordingly, the gradient coefficients are decomposed into parallel and perpendicular components as in Eq.

This indicates that the characteristic defect core size is largely determined by the nematic equilibrium correlation length. p. 0
Where the paper says it

The correlation lengths and Frank elastic anisotropy obtained from the linear response analysis explain well director profiles around a +1/2 disclination core, including the core size. The latter is proportional to the equilibrium correlation length, in agreement with Landau–de Gennes scaling.

Conclusion and Outlook

The present work provides a microscopic framework linking molecular flexibility, density–nematic-order coupling, elastic anisotropy, and defect structure in semiflexible nematics. The results demonstrate how collective continuum properties can emerge from microscopic chain statistics within a unified SCFT description. p. 0

Where the paper says it

Since these phenomena are strongly influenced by molecular flexibility, wormlike chain models within self-consistent field theory (SCFT) provide a natural theoretical framework [18]. Such a microscopic framework has been widely applied to the description of order in confined geometries [19], nematic-isotropic interfaces [20, 21], the determination of elastic constants [22, 23], and structure of topological defects[20].

p. 0
Where the paper says it

Since these phenomena are strongly influenced by molecular flexibility, wormlike chain models within self-consistent field theory (SCFT) provide a natural theoretical framework [18]. Such a microscopic framework has been widely applied to the description of order in confined geometries [19], nematic-isotropic interfaces [20, 21], the determination of elastic constants [22, 23], and structure of topological defects[20].

Several directions remain open for future work, such as deriving Landau–de Gennes type gradient free energy directly from the SCFT framework. p. 4
Where the paper says it

In what follows, such gradient effects are instead investigated in the long-wavelength regime through the linear response formalism developed in the next section. LINEAR RESPONSE While the effective free energy derived in the previous section describes uniform states, spatially varying perturbations are investigated through a linear response approach within the SCFT framework around a uniform bulk state.

The present results also suggest possible extensions to the Landau–de Gennes theory to incorporate density variations, particularly in semiflexible and lyotropic nematic systems where density–nematic-order coupling plays an important role. p. 0
Where the paper says it

In fact, the Landau–de Gennes theory has become the de facto standard in studies of active nematic matter, including biopolymers [10–13]. Existing microscopic theories of liquid-crystalline ordering are largely based on the Onsager model and its extensions to semiflexible rods and polymers [14–17].

REFERENCES

2606.31009 1 Self-consistent field theory of semiflexible nematics: Density–nematic coupling, anisotropic elasticity, and defect core sizes

5 Page 2 chain density (related to concentration in solution-based systems) and nematic order are strongly coupled, with chain flexibility significantly influencing elastic response

1 Page 1 The linear response of wormlike chains in the nematic phase is studied by self-consistent field theory. Our results show that strong density–nematic degree of order coupling can destabilize the nematic state. The Frank elastic constants and the correlation lengths are obtained from a linear response analysis based on the self-consistent field theory free energy. Increasing flexibility strongly suppresses twist and bend elasticity while affecting splay elasticity comparatively weakly, leading to a crossover from bend-dominated to splay-dominated elasticity. The correlation lengths and Frank elastic anisotropy obtained from the linear response analysis explain well director profiles around a +1/2 disclination core, including the core size.

2 Page 3 The microscopic density of segments is given by ˆρ(r) ≡ R du ρˆ(r, u), which measures the local contour length per unit volume. p. 1

Where the paper says it

The microscopic density of segment positions and orientations is defined as ρˆ(r, u) = Xn i=1 Z L 0 ds δ(r − ri(s))δ(u − ui(s)), (1) which satisfies the normalization condition R dr du ρˆ(r, u) = nL. The microscopic density of segments is given by ˆρ(r) ≡ R du ρˆ(r, u), which measures the local contour length per unit volume.

The Hamiltonian of the system without external fields is given by βH0 = lp 2/2 Xn i=1 Z L 0 ds du i/ds squared + 1/2 Z dr dr' du du' ρˆ(r', u') VI (r, r'; u, u')ˆρ(r', u').

3 Page 4 The partition function of the system can be expressed as Z = 1/n! p. 2

Where the paper says it

The partition function of the system can be expressed as Z = 1 n! v n 0 Yn i=1 Z D∗ ri exp(−βH), (4) where v0 is a reference volume introduced to make the partition function dimensionless.

v n 0 Y n i=1 Z D∗ ri exp(−βH). p. 2
Where the paper says it

The partition function of the system can be expressed as Z = 1 n! v n 0 Yn i=1 Z D∗ ri exp(−βH), (4) where v0 is a reference volume introduced to make the partition function dimensionless.

Applying a Hubbard–Stratonovich transformation to decouple the interaction term, the partition function can be rewritten, up to an irrelevant normalization constant, as a functional integral over a density field ρ(r, u) (introduced via the identity R Dρ δ[ρ − ρˆ] = 1, which enforces the constraint ρ = ˆρ) and an auxiliary field w(r, u) conjugate to ρ(r, u), Z ∝ Z Dρ Dw exp (−βF[ρ, w]). p. 2
Where the paper says it

These delta function constraints enforce local inextensibility and unit tangent vectors along the chain contour. Applying a Hubbard–Stratonovich transformation to decouple the interaction term, the partition function can be rewritten, up to an irrelevant normalization constant, as a functional integral over a density field ρ(r, u) (introduced via the identity R Dρ δ[ρ − ρˆ] = 1, which enforces the constraint ρ = ˆρ) and an auxiliary field w(r, u) conjugate to ρ(r, u), Z ∝ Z Dρ Dw exp (−βF[ρ, w]).

4 Page 5 In the saddle-point approximation, the free energy is evaluated at its stationary configurations. p. 2

Where the paper says it

(6) Here, Z1[w] denotes the single chain partition function, normalized by its value in the absence of external fields. In the saddle-point approximation, the free energy is evaluated at its stationary configurations.

The stationary condition that follows from minimization with respect to ρ(r, u) gives w(r, u) = Z dr' du' VI (r', r'; u', u') ρ(r', u') +v(r, u), where v(u, r) is the external field.

5 Page 6 The orientational order parameter tensor can be computed Q(r) = Z du ρ(r, u) / (1/3 I). p. 2

Where the paper says it

In practice, these equations are solved iteratively until convergence is achieved. From the equilibrium distribution ρ(r, u), the orientational order parameter tensor can be computed [18], Q(r) = Z du ρ(r, u) u ⊗ u − 1 3 I , (12) where I is the identity tensor.

Q(r) can be further parametrized as Q(r) = ρ(r)/S(r) n n ij − 1/3 I + P(r)(m n - l l) ij. p. 2
Where the paper says it

From the equilibrium distribution ρ(r, u), the orientational order parameter tensor can be computed [18], Q(r) = Z du ρ(r, u) u ⊗ u − 1 3 I , (12) where I is the identity tensor. Q(r) can be further parametrized as Q(r) = ρ(r) S(r) n ⊗ n − 1 3 I + P(r) (m ⊗ m − l ⊗ l) , (13) where n(r), m(r), and l(r) define a local orthonormal triad, with n(r) denoting the local nematic director.

6 Page 7 The effective free energy density in terms of ρ and S is given by βfeff(ρ, S) = ρ/L ln ρv0 L + 1/2 u0ρ squared + ρ/L h g(S;L/lp) − α squared S 2i. p. 3

Where the paper says it

The free energy contribution of e −w0L cancels exactly with the term involving w ∗ 0ρ in the first term of Eq. Using the relation w ∗ Q(S), w ∗ Q can be eliminated in favor of S, thereby expressing the effective free energy density in terms of ρ and S, βfeff(ρ, S) = ρ L ln ρv0 L + 1 2 u0ρ 2+ ρ L h g(S;L/lp) − α 2 S 2 i , (19) where α = u2ρL = nL2u2/V can be interpreted as the effective strength of the alignment interaction.

The chemical potential and osmotic pressure follow from the effective free energy density in Eq. p. 3
Where the paper says it

Therefore, the extrema correspond to the intersections between the curves αS and − 2 3w˜ ∗ Q(S). The chemical potential and osmotic pressure follow from the effective free energy density in Eq.

(20) as βµ(ρ, S) = L ∂(βfeff)/∂ρ = ln ρv0 L + 1 + u0ρL + g − u2ρLS 2i. p. 3
Where the paper says it

The chemical potential and osmotic pressure follow from the effective free energy density in Eq. (20) as βµ(ρ, S) = L ∂(βfeff) ∂ρ = ln ρv0 L + 1 + u0ρL + g − u2ρLS2 , βP(ρ, S) = ρ ∂(βfeff) ∂ρ − βfeff = ρ L + 1 2 u0ρ 2 − 1 2 u2ρ 2S 2 .

7 Page 8 The isotropic-nematic coexistence condition is obtained by requiring the chemical potential and osmotic pressure to be equal in the two uniform phases. p. 3

Where the paper says it

(20) as βµ(ρ, S) = L ∂(βfeff) ∂ρ = ln ρv0 L + 1 + u0ρL + g − u2ρLS2 , βP(ρ, S) = ρ ∂(βfeff) ∂ρ − βfeff = ρ L + 1 2 u0ρ 2 − 1 2 u2ρ 2S 2 . (22) The isotropic-nematic coexistence condition is obtained by requiring the chemical potential and osmotic pressure to be equal in the two uniform phases.

The spinodal marks the limit of metastability of a uniform state, defined by the vanishing smallest eigenvalue of the Hessian matrix Aij. p. 3
Where the paper says it

The spinodal marks the limit of metastability of a uniform state. Define the Hessian matrix Aij ≡ ∂ 2 (βfeff) ∂xi∂xj , xi,j ∈ {ρ, S}, (24) evaluated at a uniform stationary state.

8 Page 9 The grand potential density is defined as βω(µ, S) = βfeff(ρ, S) − βµ/L ρ, with the density ρ determined implicitly by ∂(βfeff)/∂ρ = βµ/L. p. 3

Where the paper says it

The chemical potential and osmotic pressure follow from the effective free energy density in Eq. (20) as βµ(ρ, S) = L ∂(βfeff) ∂ρ = ln ρv0 L + 1 + u0ρL + g − u2ρLS2 , βP(ρ, S) = ρ ∂(βfeff) ∂ρ − βfeff = ρ L + 1 2 u0ρ 2 − 1 2 u2ρ 2S 2 .

The spinodal condition is equivalent to the vanishing of det A for the present two-variable problem. p. 6
Where the paper says it

Here the variables are chosen as (ρ, Q) rather than (ρ, S), so the individual matrix elements differ numerically. Nevertheless, both formulations describe the same underlying stability of the uniform state and therefore lead to the same spinodal condition, which, for the present two-variable problem, is equivalent to the vanishing of det A, i.

p. 6
Where the paper says it

Here the variables are chosen as (ρ, Q) rather than (ρ, S), so the individual matrix elements differ numerically. Nevertheless, both formulations describe the same underlying stability of the uniform state and therefore lead to the same spinodal condition, which, for the present two-variable problem, is equivalent to the vanishing of det A, i.

p. 6
Where the paper says it

Here the variables are chosen as (ρ, Q) rather than (ρ, S), so the individual matrix elements differ numerically. Nevertheless, both formulations describe the same underlying stability of the uniform state and therefore lead to the same spinodal condition, which, for the present two-variable problem, is equivalent to the vanishing of det A, i.

p. 6
Where the paper says it

Here the variables are chosen as (ρ, Q) rather than (ρ, S), so the individual matrix elements differ numerically. Nevertheless, both formulations describe the same underlying stability of the uniform state and therefore lead to the same spinodal condition, which, for the present two-variable problem, is equivalent to the vanishing of det A, i.

p. 6
Where the paper says it

Here the variables are chosen as (ρ, Q) rather than (ρ, S), so the individual matrix elements differ numerically. Nevertheless, both formulations describe the same underlying stability of the uniform state and therefore lead to the same spinodal condition, which, for the present two-variable problem, is equivalent to the vanishing of det A, i.

p. 6
Where the paper says it

Here the variables are chosen as (ρ, Q) rather than (ρ, S), so the individual matrix elements differ numerically. Nevertheless, both formulations describe the same underlying stability of the uniform state and therefore lead to the same spinodal condition, which, for the present two-variable problem, is equivalent to the vanishing of det A, i.

p. 6
Where the paper says it

Here the variables are chosen as (ρ, Q) rather than (ρ, S), so the individual matrix elements differ numerically. Nevertheless, both formulations describe the same underlying stability of the uniform state and therefore lead to the same spinodal condition, which, for the present two-variable problem, is equivalent to the vanishing of det A, i.

p. 6
Where the paper says it

Here the variables are chosen as (ρ, Q) rather than (ρ, S), so the individual matrix elements differ numerically. Nevertheless, both formulations describe the same underlying stability of the uniform state and therefore lead to the same spinodal condition, which, for the present two-variable problem, is equivalent to the vanishing of det A, i.

9 Page 10 The resulting coefficients obtained after transforming variables from (ρ, S) to (ρ, Q), with S = 3Q/(2ρ), are Aρrho = u0 + 1/L ρ + S squared L ρ g'', ArhoQ = -3S squared L rho g'', and AQQ = -9/4 u2 + 9/4 L rho g''.

10 Page 11 The corresponding correlation length associated with this observable is defined as ξ∥⊥Q ≡ q K∥⊥Q /A−. p. 7

Where the paper says it

While the soft mode characterizes the collective responses of the coupled system, the quantity most directly accessed in simulations and experiments is Q. It is therefore useful to define a corresponding correlation length associated with this observable.

The data obtained from scans over n/V, L/lp, and u0 display approximate proportionality between the core size and ξQ. p. 0
Where the paper says it

Increasing flexibility strongly suppresses twist and bend elasticity while affecting splay elasticity comparatively weakly, leading to a crossover from bend-dominated to splay-dominated elasticity. The correlation lengths and Frank elastic anisotropy obtained from the linear response analysis explain well director profiles around a +1/2 disclination core, including the core size.

p. 0
Where the paper says it

Increasing flexibility strongly suppresses twist and bend elasticity while affecting splay elasticity comparatively weakly, leading to a crossover from bend-dominated to splay-dominated elasticity. The correlation lengths and Frank elastic anisotropy obtained from the linear response analysis explain well director profiles around a +1/2 disclination core, including the core size.

p. 0
Where the paper says it

Increasing flexibility strongly suppresses twist and bend elasticity while affecting splay elasticity comparatively weakly, leading to a crossover from bend-dominated to splay-dominated elasticity. The correlation lengths and Frank elastic anisotropy obtained from the linear response analysis explain well director profiles around a +1/2 disclination core, including the core size.

p. 0
Where the paper says it

Increasing flexibility strongly suppresses twist and bend elasticity while affecting splay elasticity comparatively weakly, leading to a crossover from bend-dominated to splay-dominated elasticity. The correlation lengths and Frank elastic anisotropy obtained from the linear response analysis explain well director profiles around a +1/2 disclination core, including the core size.

p. 0
Where the paper says it

Increasing flexibility strongly suppresses twist and bend elasticity while affecting splay elasticity comparatively weakly, leading to a crossover from bend-dominated to splay-dominated elasticity. The correlation lengths and Frank elastic anisotropy obtained from the linear response analysis explain well director profiles around a +1/2 disclination core, including the core size.

p. 0
Where the paper says it

Increasing flexibility strongly suppresses twist and bend elasticity while affecting splay elasticity comparatively weakly, leading to a crossover from bend-dominated to splay-dominated elasticity. The correlation lengths and Frank elastic anisotropy obtained from the linear response analysis explain well director profiles around a +1/2 disclination core, including the core size.

p. 0
Where the paper says it

Increasing flexibility strongly suppresses twist and bend elasticity while affecting splay elasticity comparatively weakly, leading to a crossover from bend-dominated to splay-dominated elasticity. The correlation lengths and Frank elastic anisotropy obtained from the linear response analysis explain well director profiles around a +1/2 disclination core, including the core size.

p. 0
Where the paper says it

Increasing flexibility strongly suppresses twist and bend elasticity while affecting splay elasticity comparatively weakly, leading to a crossover from bend-dominated to splay-dominated elasticity. The correlation lengths and Frank elastic anisotropy obtained from the linear response analysis explain well director profiles around a +1/2 disclination core, including the core size.

11 Page 12 The Frank elastic constants are obtained from the director response by varying the wavevector magnitude k and computing χi(k). p. 7

Where the paper says it

Within the nematic regime, numerical results show that SN increases monotonically with α at fixed L/lp, whereas at fixed α it decreases with increasing L/lp. Director response and Frank elastic constants Frank elastic constants are obtained from the director response by varying the wavevector magnitude k and computing χi(k).

Numerical calculations further show that the induced variations in ρ and S do not contain a component at wavevector k, but instead appear only at 2k. p. 7
Where the paper says it

The inverse susceptibility χ −1 i (k) exhibits a linear dependence on k 2 within the range considered, with a negligible intercept, consistent with the expected Goldstone-mode behavior in Eq. Numerical calculations further show that the induced variations in ρ and S do not contain a component at wavevector k, but instead appear only at 2k.

This confirms that, within linear response, the director variations are effectively decoupled from ρ and S. p. 7
Where the paper says it

Numerical calculations further show that the induced variations in ρ and S do not contain a component at wavevector k, but instead appear only at 2k. This confirms that, within linear response, the director variations are effectively decoupled from ρ and S.

12 Page 13 The matrix elements of M(k) exhibit a clear quadratic dependence on wavevector components, confirming the validity of the small-k expansion in Eq. p. 9

Where the paper says it

The wavevector dependences of the matrix elements of M(k) are shown in Fig. The matrix elements of M(k) exhibit a clear quadratic dependence on wavevector components, confirming the validity of the small-k expansion in Eq.

(41). The collective behavior is dominated by the mode with the smaller eigenvalue, λ−(k), referred to as the soft mode. p. 7
Where the paper says it

The corresponding eigenvalues are λ±(k) = 1 2 Mρρ + MQQ ± q (Mρρ − MQQ) 2 + 4M2 ρQ . (43) The collective behavior is dominated by the mode with the smaller eigenvalue, λ−(k), referred to as the soft mode.

13 Page 14 The characteristic core size obtained from SCFT calculations scales approximately linearly with the correlation length ξQ, in agreement with Landau–de Gennes predicted scaling. p. 0

Where the paper says it

The correlation lengths and Frank elastic anisotropy obtained from the linear response analysis explain well director profiles around a +1/2 disclination core, including the core size. The latter is proportional to the equilibrium correlation length, in agreement with Landau–de Gennes scaling.

The data obtained from scans over n/V, L/lp, and u0 display approximate proportionality between the core size and ξQ.

14 Page 15 The results show that for fixed L/lp, the isotropic spinodal occurs at a constant value. p. 4

Where the paper says it

5 The results show that, for fixed L/lp, the isotropic spinodal occurs at a constant value. In contrast, the nematic spinodal varies with the ratio u0/u2.

In contrast, the nematic spinodal varies with the ratio u0/u2. p. 4
Where the paper says it

5 The results show that, for fixed L/lp, the isotropic spinodal occurs at a constant value. In contrast, the nematic spinodal varies with the ratio u0/u2.

15 Page 16 Overall, the present work provides a microscopic framework linking molecular flexibility, density–nematic-order coupling, elastic anisotropy, and defect structure in semiflexible nematics. p. 1

Where the paper says it

II, we present the SCFT framework for semiflexible nematics based on a wormlike chain model with isotropic excluded volume and anisotropic Maier–Saupe interactions. III, we construct an effective free energy description for uniform nematic states in terms of chain segment density and nematic order parameter, clarify the microscopic origin of density–nematic order coupling in the chain model, and determine the corresponding isotropic-nematic coexistence and spinodal boundaries.

The results demonstrate how collective continuum properties can emerge from microscopic chain statistics within a unified SCFT description. Several directions remain open for future work. p. 0
Where the paper says it

Our work follows earlier research on the subject [19, 20, 22– 25]. The same formalism can be used to describe aggregation and scission of semiflexible aggregates [26, 27], and we will address them in future work.

Appendix A Grand potential formulation

A Page 17 The grand potential density is defined as βω(µ, S) = βfeff(ρ, S) − βµ/L ρ, with the density ρ determined implicitly by ∂(βfeff)/∂ρ = βµ/L. The spinodal condition is equivalent to the vanishing of det A for the present two-variable problem.

Appendix B Numerical method for SCFT

B Page 18 The SCFT equations, Eqs. (7) and (8), are solved numerically using a real spherical-harmonic expansion together with an iterative procedure, following the numerical methods developed in our previous work [20] and in Ref. p. 7

Where the paper says it

For notational simplicity, tildes are omitted in the following. Unless otherwise stated, all numerical results presented below are obtained from SCFT calculations using a real spherical harmonics representation.

p. 7
Where the paper says it

For notational simplicity, tildes are omitted in the following. Unless otherwise stated, all numerical results presented below are obtained from SCFT calculations using a real spherical harmonics representation.

p. 7
Where the paper says it

For notational simplicity, tildes are omitted in the following. Unless otherwise stated, all numerical results presented below are obtained from SCFT calculations using a real spherical harmonics representation.

p. 7
Where the paper says it

For notational simplicity, tildes are omitted in the following. Unless otherwise stated, all numerical results presented below are obtained from SCFT calculations using a real spherical harmonics representation.

p. 7
Where the paper says it

For notational simplicity, tildes are omitted in the following. Unless otherwise stated, all numerical results presented below are obtained from SCFT calculations using a real spherical harmonics representation.

p. 7
Where the paper says it

For notational simplicity, tildes are omitted in the following. Unless otherwise stated, all numerical results presented below are obtained from SCFT calculations using a real spherical harmonics representation.

[25].

Appendix C Topological defects Core size and elastic anisotropy

C Page 19 The characteristic core size obtained from SCFT calculations scales approximately linearly with the correlation length ξQ, in agreement with Landau–de Gennes predicted scaling. The data obtained from scans over n/V, L/lp, and u0 display approximate proportionality between the core size and ξQ.

Appendix D Numerical method for SCFT

D Page 20 The Python code used in this work is available at Zenodo [39].

APPENDIX A Grand potential formulation

A Page 21 The grand potential density is defined as βω(µ, S) = βfeff(ρ, S) − βµ/L ρ, with the density ρ determined implicitly by ∂(βfeff)/∂ρ = βµ/L. The spinodal condition is equivalent to the vanishing of det A for the present two-variable problem.

APPENDIX B Numerical method for SCFT

B Page 22 The SCFT equations, Eqs. (7) and (8), are solved numerically using a real spherical-harmonic expansion together with an iterative procedure, following the numerical methods developed in our previous work [20] and in Ref. [25].

APPENDIX C Topological defects Core size and elastic anisotropy

C Page 23 The characteristic core size obtained from SCFT calculations scales approximately linearly with the correlation length ξQ, in agreement with Landau–de Gennes predicted scaling. The data obtained from scans over n/V, L/lp, and u0 display approximate proportionality between the core size and ξQ.

APPENDIX D Numerical method for SCFT

D Page 24 The Python code used in this work is available at Zenodo [39].

Appendix A Grand potential formulation

A Page 25 The grand potential density is defined as βω(µ, S) = βfeff(ρ, S) − βµ/L ρ, with the density ρ determined implicitly by ∂(βfeff)/∂ρ = βµ/L. The spinodal condition is equivalent to the vanishing of det A for the present two-variable problem.

Appendix B Numerical method for SCFT

B Page 26 The SCFT equations, Eqs. (7) and (8), are solved numerically using a real spherical-harmonic expansion together with an iterative procedure, following the numerical methods developed in our previous work [20] and in Ref. [25].

Appendix C Topological defects Core size and elastic anisotropy

C Page 27 The characteristic core size obtained from SCFT calculations scales approximately linearly with the correlation length ξQ, in agreement with Landau–de Gennes predicted scaling. The data obtained from scans over n/V, L/lp, and u0 display approximate proportionality between the core size and ξQ.

Appendix D Numerical method for SCFT

D Page 28 The Python code used in this work is available at Zenodo [39].

Appendix A Grand potential formulation

A Page 29 The grand potential density is defined as βω(µ, S) = βfeff(ρ, S) − βµ/L ρ, with the density ρ determined implicitly by ∂(βfeff)/∂ρ = βµ/L. The spinodal condition is equivalent to the vanishing of det A for the present two-variable problem.

Appendix B Numerical method for SCFT

B Page 30 The SCFT equations, Eqs. (7) and (8), are solved numerically using a real spherical-harmonic expansion together with an iterative procedure, following the numerical methods developed in our previous work [20] and in Ref. [25].

Appendix C Topological defects Core size and elastic anisotropy

C Page 31 The characteristic core size obtained from SCFT calculations scales approximately linearly with the correlation length ξQ, in agreement with Landau–de Gennes predicted scaling. The data obtained from scans over n/V, L/lp, and u0 display approximate proportionality between the core size and ξQ.

Appendix D Numerical method for SCFT

D Page 32 The Python code used in this work is available at Zenodo [39].

APPENDIX A Grand potential formulation

A Page 33 The grand potential density is defined as βω(µ, S) = βfeff(ρ, S) − βµ/L ρ, with the density ρ determined implicitly by ∂(βfeff)/∂ρ = βµ/L. The spinodal condition is equivalent to the vanishing of det A for the present two-variable problem.

APPENDIX B Numerical method for SCFT

B Page 34 The SCFT equations, Eqs. (7) and (8), are solved numerically using a real spherical-harmonic expansion together with an iterative procedure, following the numerical methods developed in our previous work [20] and in Ref. [25].

APPENDIX C Topological defects Core size and elastic anisotropy

C Page 35 The characteristic core size obtained from SCFT calculations scales approximately linearly with the correlation length ξQ, in agreement with Landau–de Gennes predicted scaling. The data obtained from scans over n/V, L/lp, and u0 display approximate proportionality between the core size and ξQ.

APPENDIX D Numerical method for SCFT

D Page 36 The Python code used in this work is available at Zenodo [39].

Appendix A Grand potential formulation

A Page 37 The grand potential density is defined as βω(µ, S) = βfeff(ρ, S) − βµ/L ρ, with the density ρ determined implicitly by ∂(βfeff)/∂ρ = βµ/L. The spinodal condition is equivalent to the vanishing of det A for the present two-variable problem.

Appendix B Numerical method for SCFT

B Page 38 The SCFT equations, Eqs. (7) and (8), are solved numerically using a real spherical-harmonic expansion together with an iterative procedure, following the numerical methods developed in our previous work [20] and in Ref. [25].

Appendix C Topological defects Core size and elastic anisotropy

C Page 39 The characteristic core size obtained from SCFT calculations scales approximately linearly with the correlation length ξQ, in agreement with Landau–de Gennes predicted scaling. The data obtained from scans over n/V, L/lp, and u0 display approximate proportionality between the core size and ξQ.

Appendix D Numerical method for SCFT

D Page 40 The Python code used in this work is available at Zenodo [39].

Appendix A Grand potential formulation

A Page 41 The grand potential density is defined as βω(µ, S) = βfeff(ρ, S) − βµ/L ρ, with the density ρ determined implicitly by ∂(βfeff)/∂ρ = βµ/L. The spinodal condition is equivalent to the vanishing of det A for the present two-variable problem.

Appendix B Numerical method for SCFT

B Page 42 The SCFT equations, Eqs. (7) and (8), are solved numerically using a real spherical-harmonic expansion t… p. 7

Where the paper says it

Unless otherwise stated, all numerical results presented below are obtained from SCFT calculations using a real spherical harmonics representation. In practice, the expansion is truncated at finite angular order, which tends to underestimate the equilibrium nematic order parameter.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Improved AI can predict nematic spinodal behavior based on density-nematic order coupling by analyzing how the nematic spinodal varies with the ratio u0/u2. This allows for more accurate phase diagram construction in lyotropic systems beyond simple Landau-de Gennes theory.

  2. The system can accurately calculate Frank elastic constants by performing a linear response analysis to director distortions, yielding scaling forms like beta Ki = u-1/2 K i(alpha, L/lp). This allows for direct determination of elastic constants from long-wavelength responses.

  3. AI can model defect core sizes and their anisotropy in density weighted order parameter profiles by relating them to the equilibrium correlation length ξQ, as shown by the approximate proportionality between the core size and ξQ. This provides a microscopic link between defect structure and continuum properties.

  4. The system can distinguish between different chain flexibility regimes by analyzing how elastic constants like K1 and K3 behave, noting that K1 exhibits a weaker dependence on chain flexibility while K3 is strongly affected. This enables better classification of liquid crystal systems based on molecular architecture.

  5. AI can predict the behavior of correlation lengths near phase transitions by modeling the divergence as ξ (u0 - u0,i) -1/2, showing that the two correlation lengths ξ− and ξQ follow the same scaling. This is crucial for understanding critical phenomena in compressible lyotropic nematics.

Abstract

Landau--de Gennes theory provides a successful continuum description of nematic order and topological defects, but connecting its phenomenological coefficients to microscopic molecular properties remains challenging in lyotropic liquid crystals. They often exhibit strong elastic anisotropy and, as is the case in lyotropic chromonics, defect cores are much larger than characteristic molecular length scales. A self consistent field theory for fixed length wormlike chains is introduced to describe the effects of chain flexibility and of density--nematic order coupling on equilibrium uniform and defected states. Results show that while the coupling between density and nematic director is weak, a stronger density--degree of order coupling softens collective nematic fluctuations, controls the limit of stability of the nematic phase, and modifies the magnitudes and anisotropy of the correlation lengths. Near a +1/2 disclination, density deviations relative to the uniform state are shown to be large, and modify the extent of the core. Further, the director profile is anisotropic. The defect core size is found to scale approximately linearly with the bulk correlation length, a trend also observed in an augmented Landau--de Gennes model. These results provide microscopic insight on how chain density and flexibility couple to nematic order, and point to an augmented Landau--de Gennes model for lyotropic liquid crystals.

Sources

Related papers