Stacking-Directed Polarization and Excitonic Engineering in MoS 2 /MoSe 2 van der Waals Heterostructures

arXiv:2606.22014 · cond-mat.mtrl-sci · Submitted 2026-06-20 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Condensed Matter. The day in condensed matter: materials, phases and the measurements under them.

Kai: We're looking at the paper: "Stacking-Directed Polarization and Excitonic Engineering in MoS 2 /MoSe 2 van der Waals Heterostructures".

Mira: Here's the gist of the paper. The stacking-dependent polarization and excitonic response of MoS2/MoSe2 heterostructures were investigated using GW+BSE many-body perturbation theory.

Kai: Core Findings on Polarization and Excitons The study found that the MoS2 homobilayer exhibits a switchable interlayer dipole driven by registry-induced symmetry breaking.

Mira: In contrast, the MoS2/MoSe2 hetero-interface remained pinned by the intrinsic chemical potential mismatch between sulfur and selenium.

Kai: In trilayer configurations, stacking sequence enabled a deterministic control of photogenerated electrons between the central and bottom MoS2 layers, governed by internal electric fields and quasiparticle band-edge shifts of 60–70 meV.

Paper summary: Kai: So looking at the title, "Stacking-Directed Polarization and Excitonic Engineering in MoS2 /MoSe2 van der Waals Heterostructures," it really tells you that the core message is about controlling these two things by changing how you stack them.

Mira: Exactly, it’s not just about one material; it’s about the specific arrangement of MoS2 and MoSe2 that dictates if you get a switchable dipole or a pinned interface.

Lev: From an implementation view, the implication is that if we can reliably control this stacking sequence, we might be able to design devices where the optical response switches based on structural configuration.

Kai: It moves us toward realizing multi-state optoelectronic memory systems where the light-matter interaction itself is programmable through physical arrangement.

Mira: And it points toward creating ferroelectric switching devices where the polarization can be tuned by stacking, which is a significant leap from current designs that often rely on external electric fields.

Lev: But we have to be careful; the paper does acknowledge that a systematic understanding of how atomic registry governs many-body excitonic behavior at the many-body level is still elusive.

Kai: So the implication is that while this work shows a clear pathway, we still need more theoretical tools to fully map out all those subtle many-body effects across different stacking orders.

Mira: It's a solid foundation, showing that atomic registry and many-body interactions are fundamentally linked in these vdW heterostructures.

Lev: For the future work, I’d say we need to see if we can incorporate these calculated shifts into models that account for real device imperfections and disorder.

Kai: That sounds like a good direction for the next phase, moving from ideal theoretical control to practical device performance under realistic conditions.

Conclusion: Kai: So, this paper is about how you can control the electrical properties of stacked layers of molybdenum disulfide and molybdenum diselenide just by changing how you put them together, specifically using stacking to steer polarization and excitons.

Mira: Yeah, the authors are looking at this using many-body perturbation theory to see exactly how that stacking sequence affects the energy levels and the dipoles between the two materials.

Lev: From an engineering standpoint, they're mapping out a way to design these heterostructures where you can predict which way it will polarize before you even build it, which is huge for controlling light-matter interactions.

Kai: It’s interesting because they find that while one layer by itself has a dipole switchable by symmetry breaking, the interface between MoS2 and MoSe2 gets pinned because of the difference in their chemical potentials.

Mira: Right, so the key discovery here is that you can use stacking to override that pinning effect, giving you control over those interfacial dipoles.

Lev: And for trilayer stacks—three layers—they show that you can deterministically choose which layer has the photogenerated electrons between the central MoS2 and the bottom one by tuning internal electric fields.

Kai: It means we aren't just getting random energy shifts; we are engineering a specific carrier transfer pathway based on which layer you stack where.

Mira: That control over excitonic energy shifts, seeing things up to one hundred eight meV change based on registry, suggests a new way to tune the optical response of these materials.

Lev: But if this is true for trilayers, we need to figure out how much real-world disorder or imperfections in the stacking process will ruin that precise control.

Kai: That’s what’s next; we need to see if we can build a device that actually maintains this stacking-dependent excitonic shift under operating conditions.

Mohammed El Amine Miloudi, Oliver K¨uhn

Institute of Physics, University of Rostock

cond-mat.mtrl-sci

Submitted: 2026-06-20

Updated: 2026-10-30

Comments: revised version

License: http://creativecommons.org/licenses/by/4.0/

Importance score: 83/100

The gist: The stacking-dependent polarization and excitonic response of MoS2/MoSe2 heterostructures were investigated using GW+BSE many-body perturbation theory to establish a microscopic link between atomic…

Key concepts

Interlayer Dipole
This is a separation of charge between adjacent layers of the MoS2/MoSe2 heterostructure. The paper found that how these layers are stacked (AA, AB, or BA) causes this dipole to switch or become polarized, which is crucial for controlling the material's electrical response.
Excitonic Engineering
This refers to precisely tuning the energy of excitons—bound pairs of an electron and a hole. By changing the stacking order, researchers could shift these excitonic energies significantly (up to 108 meV), allowing for the design of specific light-matter interactions.
GW+BSE Theory
This is a high-level theoretical method used to calculate the electronic and optical properties of materials. It combines Density Functional Theory (DFT) with many-body perturbation theory to accurately predict how atomic arrangements and interlayer interactions influence the material's behavior.

Terminology

Summary

The stacking-dependent polarization and excitonic response of MoS2/MoSe2 heterostructures were investigated using GW+BSE many-body perturbation theory to establish a microscopic link between atomic registry and many-body interactions The stacking sequence enables a deterministic control of photogenerated electrons between the central and bottom MoS2 layers, governed by internal electric fields and quasiparticle band-edge shifts of 60–70 meV

Interlayer Dipole Formation in Bilayers

The impact of stacking registry on interlayer coupling in both homobilayer MoS2 and MoS2/MoSe2 heterobilayers was systematically evaluated for AA, AB, and BA configurations The AA registry preserves high structural symmetry, whereas the staggered AB and BA configurations break global inversion symmetry, thereby inducing a finite out-of-plane electric polarization, Pz In the homobilayer MoS2 in the AB configuration (Fig. 1i and Fig. p. 3

Where the paper says it

Following full structural relaxation, the AA registry preserves high structural symmetry, whereas the staggered AB and BA configurations break global inversion symmetry, thereby inducing a finite out-of-plane electric polarization, Pz. The optimized geometries for these polar registries, including both top and side views, are illustrated for the homobilayer in Fig.

2a), a spontaneous electronic redistribution occurs, with charge depletion (holes) localized near the lower layer (L1, red region) and charge accumulation (electrons) concentrated near the top layer (L2, green region) The existence of these two energetically degenerate states with opposing dipole moments confirms a switchable, bistable interlayer configuration, representing the essential microscopic prerequisite for sliding ferroelectricity in MoS2 bilayers

Pinning Mechanisms in Heterobilayers

For the chemically asymmetric MoS2/MoSe2 heterobilayer (Fig. 1k,l), a spontaneous electronic redistribution occurs, with charge depletion localized in the MoS2 layer (L1, red) and charge accumulation in the MoSe2 layer (L2, green) Both AB and BA stackings display essentially the same distribution, confirming that the intrinsic chemical potential gradient dominates over the geometric registry The calculated vacuum levels and work functions provide a complementary perspective on the electrostatic environment of these layered systems (Table 1) The MoS2/MoSe2 interface does not support a stacking-dependent, switchable internal electric field, as the intrinsic chemical potential gradient effectively pins the electronic state, suppressing the collective, registry-dependent charge transfer required for the bistable dipolar states observed in the homobilayer

Trilayer Control and Excitonic Tuning

In trilayer 2L-MoS2/MoSe2 configurations, an expanded parameter space for deterministic control of charge carriers emerges The stacking sequence dictates whether photogenerated electrons are localized in the central or bottom MoS2 layer, while holes remain confined to the MoSe2 monolayer Interlayer excitons exhibit strong sensitivity to atomic registry, with stacking-dependent energy shifts reaching up to 108 meV The calculated average interlayer excitonic shift of 36 meV shows excellent agreement with the experimentally reported ∼40 meV ferroelectric shift in 3R-MoS2/MoSe2 heterostructures

Excitonic Response Modulation

The optical response of the 2LMoS2/MoSe2 trilayer was systematically evaluated to elucidate the impact of stacking-dependent polarization on the many-body excitonic landscape The lowest-energy excitations are dominated by interlayer excitons (ILXs), characterized by spatial separation of charge carriers, with holes localized in the MoSe2 valence band and electrons residing in the MoS2 bilayer The variation in intensity across different stackings reflects differences in interlayer coupling; for example, ABB and BAB configurations exhibit higher oscillator strengths than BAA, indicating enhanced wavefunction overlap across the vdW gap The characteristic energy is defined as Eavg AB = (EABA + EABB)/2 ≈ 1.339 eV, whereas for BA-type configurations it is given by Eavg BA = (EBAA + EBAB)/2 ≈ 1. p. 2

Where the paper says it

We demonstrate that AB and BA registries generate interfacial dipoles of opposite polarity, resulting in switchable band-edge shifts while maintaining the robust type-II alignment necessary for charge separation. Furthermore, we show that in trilayer configurations, stacking-induced asymmetry allows for the finetuning of polarization states and excitonic transitions, offering a predictive road map for the design of non-volatile excitonic transistors and atomically controlled ferroelectric optoelectronic logic.

375 eV

Conclusion

The ability to modulate excitonic energies and carrier transfer pathways through precise control of stacking sequence offers a promising route toward multi-state optoelectronic memory and next-generation sliding ferroelectric devices The predicted shift of 36 meV is in excellent agreement with the experimentally reported value of approximately 40 meV [29] Overall, these results demonstrate that the interplay between structural sliding and many-body interactions in TMD trilayers provides a powerful degree of freedom for engineering programmable light–matter interactions The stacking registry in 2L-MoS2/MoSe2 trilayers emerges as an internal electrostatic boundary condition that encodes atomic configuration into a self-consistent dipolar landscape The resulting registry electrostatics orbital hierarchy establishes atomic-scale stacking as a deterministic control knob for internal fields, band-edge reconstruction, and optical response in layered heterostructures The analysis of the MoS2 homobilayer demonstrates that lateral sliding between AB and BA registries enables a reversible inversion of the out-of-plane dipole moment The stacking sequence dictates whether photogenerated electrons are localized in the central or bottom MoS2 layer, while holes remain confined to the MoSe2 monolayer The many-body excitonic spectra further corroborate these findings The ability to modulate excitonic energies and carrier transfer pathways through precise control of stacking sequence offers a promising route toward multi-state optoelectronic memory and next-generation sliding ferroelectric devices The predicted shift of 36 meV is in excellent agreement with the experimentally reported value of approximately 40 meV [29]

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Predict sliding ferroelectricity in MoS2 trilayers by utilizing stacking sequence as an input parameter for calculating interlayer excitonic energy shifts, specifically predicting a 36 meV shift based on registry-dependent dipole moments.

  2. Design programmable optoelectronic logic devices by mapping specific stacking registries (like AB versus BA) to switchable internal electric fields and band-edge shifts, allowing the system to function as a programmable optoelectronic functionality.

  3. Develop an AI model for material design that uses the calculated interlayer charge redistribution profiles (CDD isosurfaces) to determine whether a given heterostructure will exhibit a switchable dipole or be pinned by intrinsic chemical potential mismatch.

Abstract

The stacking-dependent polarization and excitonic response of MoS 2 /MoSe 2 heterostructures were investigated using GW+BSE many-body perturbation theory. While homobilayer MoS 2 exhibited a switchable interlayer dipole driven by registry-induced symmetry breaking, the MoS 2 /MoSe 2 hetero-interface remained pinned by the intrinsic chemical potential mismatch between sulfur and selenium. In 2L-MoS 2 /MoSe 2 trilayers, the stacking sequence enabled a deterministic control of photogenerated electrons between the central and bottom MoS 2 layers, governed by internal electric fields and quasiparticle band-edge shifts of 60--70 meV. Our calculations predicted a 36 meV interlayer excitonic shift, in remarkable agreement with recent experiments. These results elucidate the microscopic link between atomic registry and many-body interactions, establishing transition metal dichalcogenide trilayers as a potential platform for sliding ferroelectricity and programmable optoelectronic functionalities.

Related papers