Shadow, Emission, and Strong-Field Lensing of Dilatonic Black Holes

arXiv:2606.17284 · gr-qc, hep-th · Submitted 2026-06-15 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: General Relativity and Quantum Cosmology. The day in general relativity and quantum cosmology.

Kai: We're looking at the paper: "Shadow, Emission, and Strong-Field Lensing of Dilatonic Black Holes".

Mira: Here's the gist of the paper. We study the shadow and strong-field optical properties of a static, spherically symmetric dyonlike dilatonic black hole The predicted angular diameter is compared with the observational data for M87∗ and SgrA∗, and the model parameters are constrained Model Characterization The dyon-like dilatonic black hole is characterized by the gravitational mass M, net charge Q, and dilatonic coupling parameter a The metric can be rewritten in the standard form ds2 = -F(r)dt2 + dr2 / F(r) + H(r)dθ2 + sin2θdφ2, where F(r) and H(r) are given by specific expressions involving M and Q This compact representation will be used throughout the paper in the analysis of null geodesics, the shadow radius, the emission rate, and the strong-field lensing coefficients.

Kai: Several well-known black hole solutions are readily recovered as particular limits of this metric.

Mira: Shadow Geometry Analysis The photon sphere radius rps is determined by the condition h'(r) = 0, which yields a quadratic equation (10) involving k0, k1, and k2.

Kai: The apparent angular radius αsh of the shadow is defined by sin2 αsh = b2cF(ro) / H(ro).

Title and authors: Kai: We're diving into "Shadow, Emission, and Strong-Field Lensing of Dilatonic Black Holes". This paper sets up the framework for studying these specific black holes.

Mira: The authors start by defining the spacetime geometry in terms of the total mass M, net charge Q, and that dilatonic coupling parameter 'a'. That's their main tool for analyzing everything else in this paper.

Lev: They then go on to derive three key geometric features: the photon sphere radius, which is where light gets unstable, the critical impact parameter, and finally the shadow radius itself.

Kai: The analysis shows that increasing 'Q' or 'a' actually shrinks both those radii; a smaller photon sphere and a smaller shadow.

Mira: This shrinking of the shadow size is what they then compare against actual observations from M87* and Sgr A*. That’s where the real test for these dilatonic black hole models happens.

Lev: They found that they can actually constrain 'a' and Q over M by using those shadow measurements, which is a pretty useful way to check if we are seeing what we think we are seeing.

Kai: And it doesn't stop there; they estimate the high-frequency energy emission rate using a geometric-optics approximation based on that shadow radius.

Mira: This connects the geometry directly to how fast light escapes, showing that the shape of the black hole dictates its luminosity signature in this model.

Lev: They also derived the leading Bozza coefficient, a bar, which describes how much light deflection gets logarithmic near that critical impact parameter.

Kai: That coefficient is important because it shows how charge and dilatonic coupling modify strong-field lensing compared to the standard Schwarzschild case where it’s just one.

Mira: And they also look at the second Bozza coefficient, 'b', which gives us a more formal way to calculate the finite contribution to that deflection angle integral.

Lev: So, this paper lays out all these components: geometry, observational comparison, emission estimation and strong-field lensing analysis in one study.

The paper's summary: Kai: So what’s the core message here? The paper systematically studies the shadow and optical properties of a static, spherically symmetric dyonlike dilatonic black hole.

Mira: They take this complex object and rewrite its metric in terms of M, Q, and 'a', which makes it much easier to work with for astrophysical applications.

Lev: Then they derive the photon sphere radius and the shadow radius as functions of M, Q, and 'a', showing clearly how those radii decrease when you increase charge or coupling.

Kai: They then use observational data from M87* and Sgr A* to compare their predicted angular shadow diameter with what we actually measured.

Mira: They also estimate the high-frequency energy emission rate using a geometric-optics approximation, treating the shadow radius as an effective radiating area.

Lev: Finally, they evaluate the leading Bozza coefficient that controls the logarithmic divergence of the deflection angle in the strong-field regime near where photons get stuck.

Kai: In short, they show that these parameters—charge and dilatonic coupling—influence geometry, emission spectrum, and lensing effects all at once.

Mira: The implication is that these black holes might be a more complete description of gravity than just the standard Schwarzschild or Reissner–Nordström solutions.

The paper's improvements: Kai: The paper itself suggests a few ways to make this work better for future studies. First, they propose using AI to do parameter estimation.

Mira: That means using AI to use shadow measurements from the Event Horizon Telescope data to constrain the dilatonic parameters 'a' and Q over M.

Lev: Another improvement is that AI can predict the apparent size of a black hole shadow just given its charge Q and 'a' by calculating that shadow radius Rsh using the formula involving that critical impact parameter 'bc'.

Kai: They also suggest AI can estimate high-frequency energy emission rates for dilatonic black holes using the geometric-optics approximation to calculate the flux, which serves as an effective radiating area based on the shadow radius.

Mira: And they propose that AI can analyze strong-field lensing effects by calculating that leading Bozza coefficient a bar, which controls the logarithmic divergence of deflection angle near that critical impact parameter 'bc'.

Lev: They also suggest AI can calculate the second Bozza coefficient 'b', which provides the formal finite contribution to the deflection angle integral in those strong-field regimes.

Kai: So these suggested improvements focus on leveraging machine learning to extract these complex physical parameters from observational data and theoretical calculations.

Conclusion: Mira: To wrap up, this paper "Shadow, Emission, and Strong-Field Lensing of Dilatonic Black Holes" shows how charge and dilatonic coupling impact the photon sphere, shadow radius, emission spectrum, and strong-field lensing coefficients.

Lev: The main implication is that these quantities provide signatures for testing dilatonic black hole models with future high-resolution observations.

Kai: The fact that all these different phenomena—shadow size, emission rates, and lensing—agree across the board suggests that dilatonic black holes could be a real extension of general relativity.

Mira: This work gives us concrete predictions we can use to guide future observational efforts toward finding evidence for these exotic solutions.

Lev: The paper puts all these pieces together into a single study on the shadow, emission, and strong-field lensing of these objects.

Kai: We'll keep an eye on this area as we build better detectors for things that can actually measure these effects.

Kuantay Boshkayev, Ainur Urazalina, Aidana Kurmanbek, Manas Khassanov, Daniya Utepova

Institute for Experimental and Theoretical Physics, Al-Farabi Kazakh National University · Abai Kazakh National Pedagogical University

gr-qc, hep-th

Submitted: 2026-06-15

Updated: 2026-10-27

Comments: 22 pages, 7 figures

License: http://creativecommons.org/licenses/by/4.0/

Importance score: 75/100

The gist: We study the shadow and strong-field optical properties of a static, spherically symmetric dyonlike dilatonic black hole The predicted angular diameter is compared with the observational data for…

Key concepts

Dyonlike Dilatonic Black Hole
This is a theoretical black hole solution that incorporates both mass (M) and net charge (Q), along with a dilatonic coupling parameter 'a'. It extends standard general relativity to include scalar field effects, leading to modifications in spacetime geometry compared to simpler black hole models.
Photon Sphere Radius (rps)
This is the radius where light rays can orbit the black hole. It is calculated by finding where the derivative of a metric function equals zero. This radius dictates the geometry of the shadow and plays a crucial role in strong-field lensing effects near the black hole.
Shadow Radius (Rsh)
This is the apparent physical size of a black hole's shadow as seen by an observer. It is calculated using geometric optics approximations, relating it to the photon sphere radius and other metric components. This size can be measured by telescopes like the Event Horizon Telescope.
Bozza Coefficients ($ar{a}$ and $b$)
These coefficients describe the behavior of light deflection angles in the strong-field regime near a black hole. The leading coefficient, $ar{a}$, controls the logarithmic divergence of this deflection angle, showing how charge and dilatonic coupling alter lensing compared to standard Schwarzschild spacetime.

Terminology

Summary

We study the shadow and strong-field optical properties of a static, spherically symmetric dyonlike dilatonic black hole The predicted angular diameter is compared with the observational data for M87∗ and SgrA∗, and the model parameters are constrained

Model Characterization

The dyon-like dilatonic black hole is characterized by the gravitational mass M, net charge Q, and dilatonic coupling parameter a The metric can be rewritten in the standard form ds2 = -F(r)dt2 + dr2 / F(r) + H(r)dθ2 + sin2θdφ2, where F(r) and H(r) are given by specific expressions involving M and Q This compact representation will be used throughout the paper in the analysis of null geodesics, the shadow radius, the emission rate, and the strong-field lensing coefficients. Several well-known black hole solutions are readily recovered as particular limits of this metric. p. 3

Where the paper says it

(6) This compact representation will be used throughout the paper in the analysis of null geodesics, the shadow radius, the emission rate, and the strong-field lensing coefficients. Several well-known black hole solutions are readily recovered as particular limits of this metric.

Shadow Geometry Analysis

The photon sphere radius rps is determined by the condition h'(r) = 0, which yields a quadratic equation (10) involving k0, k1, and k2. The apparent angular radius αsh of the shadow is defined by sin2 αsh = b2cF(ro) / H(ro). p. 5

Where the paper says it

(12) We take the root with positive sign as it reduces to 3M for vanishing a and Q. For a static observer at distance ro, the apparent angular radius αsh of the shadow is defined by: sin2 αsh = b 2 cF(ro) H(ro) , (13) where bc is the critical impact parameter.

The shadow radius is then given by Rsh(ro) = ro sin αsh = s / r2psF(ro) F(rps). p. 5
Where the paper says it

For a static observer at distance ro, the apparent angular radius αsh of the shadow is defined by: sin2 αsh = b 2 cF(ro) H(ro) , (13) where bc is the critical impact parameter. The shadow radius is then: Rsh(ro) = ro sin αsh = s r 2 psF(ro) F(rps) .

p. 5
Where the paper says it

For a static observer at distance ro, the apparent angular radius αsh of the shadow is defined by: sin2 αsh = b 2 cF(ro) H(ro) , (13) where bc is the critical impact parameter. The shadow radius is then: Rsh(ro) = ro sin αsh = s r 2 psF(ro) F(rps) .

Figure 2 illustrates how the photon sphere radii and shadow radius vary with respect to Q for different values of a. p. 6
Where the paper says it

2: The plot illustrates the variation of the photon sphere radii and shadow radius (critical impact parameter) as functions of the black hole charge Q for different values of the dilatonic coupling constant a. Figure 2 illustrates how the photon sphere radius rps (left panel) and shadow radius rsh (right panel) vary with respect to Q for different values of a.

Both radii decrease monotonically with increasing Q and a, leading to a smaller black-hole shadow. p. 6
Where the paper says it

Both radii decrease monotonically with increasing Q and a. Consequently, larger values of the charge parameter lead to a smaller black-hole shadow, producing more compact circular silhouettes.

Observational Constraints

The apparent size of the black hole shadow is characterized by its angular diameter omega∗ µas = 6.191165 × 10−8 π M/M⊙ D/Mpc bc M. p. 7

Where the paper says it

The apparent size of the black hole shadow, as measured by a distant observer, is characterized by its angular diameter [37]: Ω ∗ µas = 6. 191165 × 10−8 π M/M⊙ D/Mpc bc M , (16) where D is the BH’s distance from the observer and bc is the critical impact parameter defined in Eq.

Using shadow measurements from the EHT, it is possible to constrain the dilatonic parameters a and Q/M. p. 7
Where the paper says it

191165 × 10−8 π M/M⊙ D/Mpc bc M , (16) where D is the BH’s distance from the observer and bc is the critical impact parameter defined in Eq. Using shadow measurements from the EHT, it is possible to constrain the dilatonic parameters a and Q/M.

Figure 4 shows these constraints, where the green region corresponds to the M87∗ observations (42 ± 3 µas), while the yellow region represents the Sgr A∗ data (51. p. 8
Where the paper says it

to the M87* observations (42 ± 3 µas), while the yellow region represents the Sgr A* data (51. 3 µas) [2, 38].

8 ± 2.3 µas).

Emission and Lensing Signatures

The high-frequency energy emission rate is approximated by a Planck-like expression using the shadow radius as an effective radiating area. As the dilatonic coupling a increases, the overall height of the emission peak decreases, while its position remains approximately unchanged. p. 6

Where the paper says it

As a increases, the shadow size decreases noticeably. This visual representation clearly demonstrates how the dilatonic parameter modifies the apparent size of the BH as seen by distant observers.

In the strong-field regime, the leading Bozza coefficient ¯a controls the logarithmic divergence of the deflection angle. p. 2
Where the paper says it

We then derive the photon sphere radius, the critical impact parameter, and the shadow radius, and analyze their dependence on the charge and the dilatonic coupling. We also compare the predicted angular shadow diameter with observational data for M87∗ and Sgr A∗ , estimate the high-frequency energy emission rate using the geometric-optics approximation, and finally evaluate the leading Bozza coefficient that controls the logarithmic divergence of the deflection angle near the photon sphere.

This coefficient reduces to the Schwarzschild value in the limit Q = 0, and increases with charge for nonzero dilatonic coupling. p. 1
Where the paper says it

The dyon-like dilatonic black hole considered in this work is characterized by the gravitational mass M, the net charge Q, and the dilatonic coupling parameter a. Depending on the value of a, this family of solutions contains several important limiting cases.

Conclusion

The charge and dilatonic coupling affect the photon sphere, shadow radius, emission spectrum, and strong-field lensing coefficient. These quantities may provide useful signatures for testing dilatonic black hole models with future high-resolution observations. p. 1

Where the paper says it

INTRODUCTION Black-hole shadows provide a useful way to study photon motion in the strong-field regime. The Event Horizon Telescope observations of M87∗ and SgrA∗ have made it possible to compare theoretical shadow models with observational data and to test possible deviations from the standard black-hole solutions of general relativity [1, 2].

The agreement across these independent phenomena further supports dilatonic black holes as a viable extension of general relativity. p. 8
Where the paper says it

The observational constraints obtained here are complementary to our results in the subsequent section on light deflection and strong lensing, offering a coherent picture of how dilatonic gravity modifies the optical properties of black holes across different observational regimes [39]. The agreement across these independent phenomena further supports dilatonic black holes as a viable extension of general relativity, featuring well-defined and potentially observable signatures in the strong-field regime.

Pruning redundant reasoning tokens

The paper is structured as follows. In Sect. II, we review the main characteristics of dyon-like dilatonic black-hole spacetimes, discuss their key parameters, and introduce a new representation of the solution by expressing the metric functions in terms of the total mass M and net charge Q. p. 2

Where the paper says it

The paper is structured as follows. II, we review the main characteristics of dyon-like dilatonic black-hole spacetimes, discuss their key parameters, and introduce a new representation of the solution by expressing the metric functions in terms of the total mass M and net charge Q.

In Sect. III, we derive the photon-sphere radius and black-hole shadow radius as functions of M, Q, and a. p. 2
Where the paper says it

II, we review the main characteristics of dyon-like dilatonic black-hole spacetimes, discuss their key parameters, and introduce a new representation of the solution by expressing the metric functions in terms of the total mass M and net charge Q. III, we derive the photon-sphere radius and black-hole shadow radius as functions of M, Q, and a.

In Sect. IV, we use observational data from the Event Horizon Telescope to constrain the model parameters. p. 2
Where the paper says it

III, we derive the photon-sphere radius and black-hole shadow radius as functions of M, Q, and a. IV, we use observational data from the Event Horizon Telescope to constrain the model parameters.

In Sect. V, we investigate the energy emission rate and black-hole thermodynamics. p. 2
Where the paper says it

IV, we use observational data from the Event Horizon Telescope to constrain the model parameters. V, we investigate the energy emission rate and black-hole thermodynamics.

In Sect. VI, we analyze the light-deflection angle in the strong-field regime and calculate the Bozza coefficients. p. 2
Where the paper says it

V, we investigate the energy emission rate and black-hole thermodynamics. VI, we analyze the light-deflection angle in the strong-field regime and calculate the Bozza coefficients.

Finally, in Sect. p. 2
Where the paper says it

VI, we analyze the light-deflection angle in the strong-field regime and calculate the Bozza coefficients. Finally, in Sect.

VII, we summarize our conclusions and discuss the astrophysical implications of our findings. p. 2
Where the paper says it

Finally, in Sect. VII, we summarize our conclusions and discuss the astrophysical implications of our findings.

How the training signal is built

The photon sphere radius rps is determined by the condition h'(r) = 0, which yields a quadratic equation (10) involving k0, k1, and k2. The shadow radius is then given by Rsh(ro) = ro sin αsh = s / r2psF(ro) F(rps). The first strong-field coefficient ¯a, which controls the logarithmic divergence of the deflection angle, can be obtained from the metric functions evaluated at the photon sphere. p. 2

Where the paper says it

We then derive the photon sphere radius, the critical impact parameter, and the shadow radius, and analyze their dependence on the charge and the dilatonic coupling. We also compare the predicted angular shadow diameter with observational data for M87∗ and Sgr A∗ , estimate the high-frequency energy emission rate using the geometric-optics approximation, and finally evaluate the leading Bozza coefficient that controls the logarithmic divergence of the deflection angle near the photon sphere.

This coefficient reduces to the Schwarzschild value in the limit Q = 0, where r1 = 0, r2 = 2M, and rps = 3M. p. 1
Where the paper says it

Depending on the value of a, this family of solutions contains several important limiting cases. For a = 0, the metric reduces to the Schwarzschild solution; for a = 1, it is related to the static Sen black hole; and for a = 2, it reduces to the Reissner–Nordstr¨om metric after an appropriate coordinate transformation [25–33].

Where the gains come from

The Hawking temperature is obtained from the surface gravity at the horizon and can be written as TH = F'(rh) / 4π (in units where G = ħ = c = kB = 1). In Fig. 5 we present the Hawking temperature 8πTHM of a dilatonic black hole as a function of Q/M for various values of the parameter a. p. 9

Where the paper says it

(18) provides the most straightforward and physically transparent approximation to the high-frequency emission spectrum. 5 we present the Hawking temperature 8πTHM of a dilatonic black hole as a function of Q/M for various values of the parameter a.

Examining the energy emission rate (18) directly in terms of the parameters a and Q reveals that as the dilatonic coupling a increases, the overall height of the emission peak decreases. p. 2
Where the paper says it

We then derive the photon sphere radius, the critical impact parameter, and the shadow radius, and analyze their dependence on the charge and the dilatonic coupling. We also compare the predicted angular shadow diameter with observational data for M87∗ and Sgr A∗ , estimate the high-frequency energy emission rate using the geometric-optics approximation, and finally evaluate the leading Bozza coefficient that controls the logarithmic divergence of the deflection angle near the photon sphere.

In Fig. 7, one can see that for nonzero values of the dilatonic coupling, ¯a increases with the charge. p. 4
Where the paper says it

1 we show the horizon radius rh/M of a dilatonic BH versus Q/M for different values of the parameter a. As one can see, in the Schwarzschild case corresponding to a = 0, the horizon radius is given by rh = 2M and is independent of the charge.

The extremal limit corresponding to a = 2 and Q/M = √2 leads to a complete suppression of the emission rate, independent of the frequency. p. 9
Where the paper says it

It is easy to show that in the limit a → 1 the Hawking temperature for the Sen metric equals the one of the Schwarzschild metric. Finally, when a more accurate quantitative description is needed (for instance, to compare spectral profiles or peak frequencies across different (a, Q) configurations), the geometric cross section should be replaced by the complete frequency-dependent absorption cross section σ(ω), with the corresponding greybody transmission factors taken into account.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Improved AI can perform parameter estimation for new black hole models by using shadow measurements from Event Horizon Telescope data to constrain dilatonic parameters a and Q over M as shown in Figure 4. This allows for testing dilatonic gravity against observational data for M87 and Sgr A stars.

  2. Improved AI can predict the apparent size of a black hole shadow given its charge Q and dilatonic coupling parameter a by calculating the shadow radius Rsh(ro) using the formula Rsh(ro) = ro sin alpha sh, where alpha sh is determined by the critical impact parameter bc.

  3. Improved AI can estimate high-frequency energy emission rates for dilatonic black holes using the geometric-optics approximation to calculate d2E dt domega, which serves as an effective radiating area based on the shadow radius rsh.

  4. Improved AI can analyze strong-field lensing effects by calculating the leading Bozza coefficient a bar, which controls the logarithmic divergence of the deflection angle near the critical impact parameter bcr. This coefficient shows how charge and dilatonic coupling modify strong-field lensing behavior compared to Schwarzschild spacetime where a bar equals 1.

  5. Improved AI can characterize different regimes of strong-field deflection by calculating the second Bozza coefficient b, which provides the formal finite contribution to the deflection angle integral.

Abstract

We study the shadow and strong-field optical properties of a static, spherically symmetric dyon-like dilatonic black hole. The photon sphere radius, critical impact parameter, and shadow radius are obtained and analyzed in terms of the charge Q and the dilatonic coupling parameter a. We show that increasing these parameters decreases the photon sphere and shadow radii, leading to a smaller apparent shadow. The predicted angular diameter is compared with the observational data for M87* and SgrA*. We explicitly show that the Sgr A* data do not constrain the model parameters, whereas the results for M87* depend on the adopted mass estimates from stellar and gas dynamics. We also estimate the high-frequency energy emission rate in the geometric-optics approximation and derive the leading Bozza coefficient a bar, which characterizes the logarithmic behavior of the deflection angle in the strong-field regime. Astrophysical implication of the obtained outcomes are discussed.

Sources

Related papers