Roughness-robust surface altermagnetism in PT antiferromagnets
Listen
Radio episode about this paper
Transcript
Introduction to the show: ident: Condensed Matter. The day in condensed matter: materials, phases and the measurements under them.
Kai: We're looking at the paper: "Roughness-robust surface altermagnetism in PT antiferromagnets".
Title and authors: Kai: So, we're looking at this paper, "Roughness-robust surface altermagnetism in PT antiferromagnets," and it’s about how surface roughness doesn't destroy the spin splitting you see in the bulk. <ref:2606.11128#pg1>
Mira: Exactly, it’s tackling a problem where we usually assume that any surface won't matter, but this work says that by averaging over rough surfaces, we can actually find robust correlations <ref:2606.11128#pg2>.
Lev: From an experimental standpoint, the main thing I want to know is how this classification translates to what we can actually build and measure on real hardware <ref:2606.11128#pg3>.
Kai: Well, the authors are focusing on P T symmetric antiferromagnets because they've found that any magnet with antitranslations has a surface that is essentially gray—meaning it’s spin-degenerate and uninteresting—so they restrict the problem to those <ref:2606.11128#pg1>.
Mira: And the core idea here is that this classification depends only on the bulk antisymmetry point group and how you orient your surface normal, which they call the surface antisymmetry Laue point group or SALPG <ref:2606.11128#pg2>.
Lev: So, if we look at that table they show, it seems like this SALPG is what dictates the whole picture for macroscopic spin-momentum correlations on these rough surfaces <ref:2606.11128#pg3>.
Kai: And they introduce this concept of spin-degenerate surface altermagnets, or SD-SAMs, where the authors say spin degeneracy is enforced by a specific operation in the SALPG, like the two times z sub n hat operation <ref:2606.11128#pg3>.
Mira: That distinction between SD-SAMs and other classes seems important because it tells us how to identify which ones are actually physically observable in these rough scenarios <ref:2606.11128#pg3>.
Lev: So, for us, that means if we're trying to engineer a surface effect, we need to know if it falls into one of those SD-SAM classes or something else entirely <ref:2606.11128#pg3>.
Kai: The paper also points out some interesting improvements they suggest, which are really about how we can use this information to predict things more accurately <ref:2606.11128#pg3>.
Mira: I'm looking at the suggestions about how the AI can classify these things based on bulk symmetry operations, which is a big step toward predictive modeling <ref:2606.11128#pg3>.
Lev: It’s interesting that they suggest the AI could predict those macroscopic spin-momentum correlations by calculating that SALPG when you know the bulk point group and your surface normal, which seems like a way to filter out the noise <ref:2606.11128#pg3>.
Kai: And they specifically mention that this helps us distinguish between different classes, noting where spin degeneracy is enforced by that two times z sub n hat operation in the SALPG <ref:2606.11128#pg3>.
Mira: That links back to what we discussed earlier about identifying those SD-SAMs, which seems like a necessary tool for material realization <ref:2606.11128#pg3>.
Lev: And the paper also touches on the possibility of deterministic electrical switching, suggesting that if the bulk point group allows it, those antiferromagnets can switch their Néel vector using bulk staggered current-induced torques <ref:2606.11128#pg3>.
Kai: That combination of bulk switchability and altermagnetic surface transport properties is what really excites me for spintronics applications <ref:2606.11128#pg1>.
Mira: It opens up a path where you might combine the inherent bulk switchability with macroscopic surface altermagnetic responses right in the same functional layer <ref:2606.11128#pg3>.
Lev: Or, they suggest that for d-wave surface altermagnetism, we might see that manifested as an in-plane spin-splitter effect, which points toward lateral transport geometries similar to what we've seen with bulk d-wave materials like Mn5Si3 <ref:2606.11128#pg3>.
Kai: So the final point from this paper is that you can assign a material to a rough-surface altermagnetic class just by knowing its bulk point group and the surface normal vector <ref:2606.11128#pg3>.
Mira: It’s important to remember that this classification describes what happens after averaging over an ensemble of configurations, which is different from looking at a single flat region <ref:2606.11128#pg3>.
Lev: To wrap up on the practical side, they flag that for many point groups, there are just no known realizations for certain surface effects like g-wave or i prime wave altermagnetism <ref:2606.11128#pg3>.
Kai: So overall, this paper provides a complete classification of macroscopically compensated rough surfaces of P T symmetric antiferromagnets and identifies the corresponding altermagnetic surface classes <ref:2606.11128#pg3>.
Mira: It’s a rigorous way to categorize these phenomena, moving past just local measurements to understand what survives roughness <ref:2606.11128#pg3>.
Lev: For the future, this sets a clear roadmap for experimentalists and AI researchers on how to search for these specific surface symmetries in novel materials <ref:2606.11128#pg3>.
Kai: Yeah, it's a solid foundation for understanding what kind of surfaces we can actually engineer to get useful spin effects <ref:2606.11128#pg3>.
Mira: It’s a nice piece of theoretical work that connects the bulk properties of these antiferromagnets to macroscopic surface behavior through this SALPG framework <ref:2606.11128#pg3>.
Lev: I think the key thing for us is how robust this classification is against real-world variations in roughness, which seems to be where the paper really shines <ref:2606.11128#pg3>.
Kai: Yeah, so it’s a useful tool for understanding how surface imperfections can actually be harnessed instead of just being treated as noise <ref:2606.11128#pg3>.
The paper's summary: Kai: So we've been talking about how this paper is classifying surface altermagnetism in P T antiferromagnets based on roughness, and now we’re going to look at what they actually found summarized <ref:2606.11128#pg4>.
Mira: Right, the summary says they've established that macroscopic spin-momentum correlations aren't just about individual flat spots anymore; they are governed by this surface antisymmetry Laue point group or SALPG <ref:2606.11128#pg4>.
Lev: So what does that mean for the hardware we're building? It means the physics isn't localized to a tiny patch on the surface, but it’s dictated by how the bulk structure interacts with your specific surface orientation <ref:2606.11128#pg4>.
Kai: They use this SALPG to classify things like spin-degenerate surface altermagnets, or SD-SAMs, which they define as cases where the two times z sub n hat operation enforces that spin degeneracy <ref:2606.11128#pg4>.
Mira: That's a crucial distinction because it helps us figure out which types of surface responses are actually physically observable when you average over all the rough configurations <ref:2606.11128#pg4>.
Lev: If we want to build something robust, we need to know if our material falls into one of these defined classes, otherwise, it’s just noise from the roughness averaging <ref:2606.11128#pg4>.
Kai: The paper also points out that this classification depends only on the bulk point group and that surface normal vector you pick, which simplifies things a lot for experimental assignment <ref:2606.11128#pg4>.
Mira: And they highlight that while some point groups are easy to handle, others have very few known realizations for g-wave or i prime wave altermagnetism <ref:2606.11128#pg4>.
Lev: That’s a practical limitation; if the bulk structure doesn't allow for that specific symmetry, we can't expect to see those kinds of surface effects <ref:2606.11128#pg4>.
Kai: But the implication is that even when you can't realize every possible surface class, this framework gives us a complete picture of what *is* physically allowed <ref:2606.11128#pg4>.
Mira: It moves the goal from finding a specific surface structure to understanding the underlying symmetry constraints imposed by the bulk material itself <ref:2606.11128#pg4>.
Lev: And that leads us right into how this whole setup can be used for spintronics, which is what we’re really interested in <ref:2606.11128#pg4>.
Kai: Because by combining the bulk switchability of the antiferromagnet with these new macroscopic surface transport properties, you get a route to functionality right there in one layer <ref:2606.11128#pg4>.
Mira: They suggest that for d-wave surface altermagnetism, instead of just seeing it on the surface, we might actually see it as an in-plane spin splitter effect <ref:2606.11128#pg4>.
Lev: That suggests we could be looking at lateral transport geometries similar to those seen in bulk d-wave materials like manganese five silicon three <ref:2606.11128#pg4>.
Kai: So, the big picture is that this work gives us a way to predict what surface effects should look like based on the bulk physics and the orientation of our material <ref:2606.11128#pg4>.
Mira: It’s a complete classification of these macroscopic properties emerging from averaging over rough surfaces, which is a big step away from just looking at one flat region <ref:2606.11128#pg4>.
Lev: We need to keep in mind that this classification is about the average effect, not necessarily what you'd see on a perfect crystal surface <ref:2606.11128#pg4>.
Kai: So the next thing we want to look at is how these specific classes map onto real material candidates like those PT antiferromagnets we’re testing <ref:2606.11128#pg4>.
The paper's improvements: Tom: So we're talking about how these authors suggest ways to actually improve the prediction and classification power of this rough surface study <ref:2606.11128#pg5>.
Kai: The improvements focus on using AI to check if surface altermagnetism is forbidden based on the bulk symmetry operations, which is a huge step in filtering out impossible scenarios <ref:2606.11128#pg5>.
Mira: That’s smart because it means we can use the bulk structure alone to predict if a certain surface effect should even be possible before we waste time simulating it <ref:2606.11128#pg5>.
Lev: From an error correction standpoint, that filtering is vital; if the AI can rule out impossible states early, it reduces the overhead for running complex simulations on real hardware <ref:2606.11128#pg5>.
Kai: The other improvement lets the AI predict those macroscopic spin-momentum correlations by calculating that SALPG when you know your bulk point group and surface normal vector <ref:2606.11128#pg5>.
Mira: That prediction capability is powerful because it moves us past just observing data to actually calculating what the resulting correlation should be for a specific setup <ref:2606.11128#pg5>.
Lev: Calculating that SALPG on the fly is computationally intensive, but if we can manage it, it gives us a way to predict the outcome faster than running full simulations <ref:2606.11128#pg5>.
Kai: They also suggest using this method to distinguish between spin-degenerate surface altermagnets and other classes by analyzing that SALPG, specifically looking at where the two times z sub n hat operation enforces spin degeneracy <ref:2606.11128#pg5>.
Mira: That ties back to the SD-SAM identification we talked about earlier; it’s a direct mathematical tool for classification <ref:2606.11128#pg5>.
Lev: It streamlines the analysis, but we still need to verify that the AI’s interpretation of that operation is accurate for our specific crystal system <ref:2606.11128#pg5>.
Kai: They also touched on how this helps us assess the potential for deterministic electrical switching by checking if the bulk point group allows it, noting that many PT antiferromagnets can switch their Néel vector through bulk staggered current-induced torques <ref:2606.11128#pg5>.
Mira: That’s a practical application; if the material switches deterministically via a torque from within the bulk, then we don't even need to rely on those surface effects for switching <ref:2606.11128#pg5>.
Lev: But the authors flag that this depends heavily on whether your specific PT antiferromagnet has those staggered current-induced torques enabled in its structure <ref:2606.11128#pg5>.
Kai: It’s a fine balance; we want robust surface effects, but we also need to see the bulk switching capability for practical use <ref:2606.11128#pg5>.
Mira: So the overall implication is that this work provides a sophisticated framework for using symmetry analysis to guide both material discovery and device design <ref:2606.11128#pg5>.
Lev: It gives us a clearer path on which bulk systems are worth pursuing for these complex surface physics studies <ref:2606.11128#pg5>.
Kai: And that brings us to the next step: figuring out which specific materials, like those PT antiferromagnets we mentioned, actually permit these more exotic surfaces we're looking for <ref:2606.11128#pg5>.
Conclusion: Kai: So to wrap things up, this paper on "Roughness-robust surface altermagnetism in PT antiferromagnets" basically confirms that macroscopic spin-momentum correlations survive when you average over rough surfaces <ref:2606.11128#pg3>.
Mira: Exactly, it establishes a complete classification based only on the bulk point group and the surface normal vector, which is a huge simplification for figuring out what to test <ref:2606.11128#pg3>.
Lev: For us in error correction, that classification is important because it tells us exactly which surface states we should expect to see on real hardware <ref:2606.11128#pg3>.
Kai: And the implication is that you can now assign a material to a specific altermagnetic class just by knowing its bulk symmetry and the surface normal <ref:2606.11128#pg3>.
Mira: It shifts our focus from trying to find any random surface effect to systematically searching for these specific symmetry classes in materials <ref:2606.11128#pg3>.
Lev: I just want to say that identifying those specific g-wave or i prime wave altermagnetism classes is the next practical hurdle for building anything useful <ref:2606.11128#pg3>.
Kai: Right, so we’ve got this classification tool now, and it points us toward the next challenge which is finding a material that actually exhibits those specific symmetries <ref:2606.11128#pg3>.
Mira: That material search will be crucial because realizing those specific surface altermagnetic classes is what unlocks the spintronic functionality we’ve been discussing <ref:two thousand six hundred six point one one one two eight#pg3.
Lev: It really shows that this theory gives us a roadmap, but the real work starts with finding the right physical system to test it on <ref:two thousand six hundred six point one one one two eight#pg3.
Department of Physics and Astronomy and Nebraska Center for Materials and Nanoscience, University of Nebraska-Lincoln
cond-mat.mtrl-sci, cond-mat.mes-hall
Submitted: 2026-06-09
Updated: 2026-11-14
Comments: 5 pages, substantial revision
License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/
Importance score: 81/100
The gist: Roughness-robust surface altermagnetism in P T antiferromagnets extends spin splitting beyond bulk altermagnets through symmetry reduction at surfaces and interfaces The classification of macroscopic…
Key concepts
- Roughness averaging
- This process eliminates surface altermagnetism in magnets that have antitranslations. It simplifies the problem by restricting the focus to P T-symmetric antiferromagnets, ensuring that the resulting macroscopic response is robust against random surface roughness.
- SALPG (Surface Antisymmetry Laue Point Group)
- This group determines the symmetry of macroscopic rough-surface responses. It is derived from the little group of nˆ obtained from the bulk APG G. This classification dictates which altermagnetic classes are possible at a rough surface, depending only on the bulk APG and surface orientation.
- Spin-degenerate surface altermagnets (SD-SAM)
- These are specific classes identified by analyzing the SALPG. They occur when spin degeneracy is enforced by the 2mz operation in Lnˆ (where zˆ∥ nˆ). Identifying these classes helps distinguish them from other surface altermagnetic types.
- PT-symmetric antiferromagnets
- The study focuses on P T-symmetric antiferromagnets because bulk antitranslations lead to a trivial, spin-degenerate surface. Restricting the analysis to this class is necessary for obtaining non-trivial, physically relevant macroscopic surface altermagnetic properties.
Terminology
Summary
Roughness-robust surface altermagnetism in P T antiferromagnets extends spin splitting beyond bulk altermagnets through symmetry reduction at surfaces and interfaces The classification of macroscopic spin-momentum correlations at compensated rough surfaces of spin-degenerate antiferromagnets is governed by the surface antisymmetry Laue point group (SALPG) which depends only on the bulk antisymmetry point group and the surface orientation. p. 3 p. 3
The Governing Symmetry Principles
Roughness averaging eliminates surface altermagnetism in all magnets with antitranslations and restricts the problem to P T-symmetric antiferromagnets. This restriction is necessary because bulk antitranslations lead to a macroscopically spin-degenerate (i. p. 1e., gray) surface for any nˆ, which is a trivial null case. p. 1 Furthermore, roughness averaging restores all symmetry operations that leave nˆ invariant, regardless of their associated translational components. p. 2
Classification of Surface Classes
The surface antisymmetry Laue point group (SALPG) is determined by the little group of nˆ obtained from the bulk APG G as Gnˆ = The symmetry of macroscopic rough-surface responses is determined by the little group of nˆ obtained from the bulk APG G as Gnˆ = The set of surface altermagnetic classes is the same as in the flat-surface classification of Ref. [12], but here they refer to macroscopic spin-momentum correlations at a rough surface. p. 1 p. 1
The classification involves designating classes where spin degeneracy is enforced by the 2mz operation in Lnˆ (where zˆ∥ nˆ) as spin-degenerate surface altermagnets (SD-SAM). p. 1 The special case of the 1¯3 2m SALPG where three-dimensional g-wave symmetry yields six nodal lines in the two-dimensional surface Brillouin zone is denoted as i′ -wave to distinguish it from the usual i-wave SALPG 16/ 1m2m2m. p. 1
Implications for Material Realization
The classification shows that the assignment of a given material to a rough-surface altermagnetic class depends only on its bulk APG and the surface normal nˆ. The authors note that several APGs have no or very few known realizations, particularly those permitting rough-surface g-wave or i/i′ -wave altermagnetism. p. 1
Functional Consequences for Spintronics
The combination of bulk switchability with altermagnetic surface transport properties provides a route toward spintronic functionality. A realization of rough-surface altermagnetism in PT-AFMs may enable the combination of inherent bulk switchability with macroscopic surface altermagnetic responses in the same functional layer. p. 2 d-wave surface altermagnetism may instead be manifested in an in-plane spin-splitter effect, suggesting lateral transport geometries analogous to those recently demonstrated for bulk d-wave Mn5Si3. p. 2
Conclusion
Macroscopic spin-momentum correlations at compensated rough surfaces of spin-degenerate antiferromagnets are governed by the surface antisymmetry Laue point group (SALPG) which depends only on the bulk antisymmetry point group and the surface orientation. This classification describes macroscopic properties emerging after averaging over an unbiased ensemble of surface configurations, in contrast to the local properties of individual atomically flat regions considered in Ref. p. 3 [12]. The work provides a complete classification of macroscopically compensated rough surfaces of P T-symmetric antiferromagnets and identifies the corresponding altermagnetic surface classes. p. 3
ACKNOWLEDGMENTS
This work was supported by the U.S. Department of Energy (DOE) Established Program to Stimulate Competitive Research (EPSCoR) through Grant No. p. 3 DESC0024284. p. 3 The references listed are [1] L. p. 2 Šmejkal, J. p. 3 Sinova, and T. p. 3 Jungwirth, Emerging research landscape of altermagnetism, Phys. p. 3 Rev. X 12, 040501 (2022), [3] L. p. 3 Bai, W. Feng, S. Liu, L. Šmejkal, Y. p. 3 Mokrousov, and Y. p. 3 Yao, Altermagnetism: Exploring new frontiers in magnetism and spintronics, Advanced Functional Materials 34, 2409327 (2024), [5] C. p. 3 Song, H. Bai, Z. Zhou, L. Han, H. Reichlova, J. p. 3 H. Dil, J Liu, X Chen, and F Pan, Altermagnets as a new class of functional materials, Nat Rev Mater 10 473 (2025), [6] T Jungwirth, J Sinova, P Wadley, D Kriegner, H Reichlova, F Krizek, H Ohno, and L Smejkal, Altermagnetic spintronics (2025), arXiv:2508. p. 309748, [7] R González-Hernández, L Šmejkal, K Výborný, Y Yahagi, J Sinova, T Jungwirth, and J Železný, Efficient electrical spin splitter based on nonrelativistic collinear antiferromagnetism, Phys. p. 3 Rev. Lett. 126 127701 (2021), [8] H. p. 3-Y Ma, M Hu, N Li, J Liu, W Yao, J. p. 3-F Jia, and J Liu, Multifunctional antiferromagnetic materials with giant piezomagnetism and noncollinear spin current, Nat Commun. p. 3 12 2846 (2021), [9] H Bai, L Han, X Y Feng, Y J Zhou, R X Su, Q Wang, L Y Liao, W X Zhu, X Z Chen, F Pan, X L Fan, and C Song Observation of spin splitting torque in a collinear antiferromagnet RuO2 Phys. p. 3 Rev. Lett. 128 197202 (2022), [10] S Karube, T Tanaka, D Sugawara, N Kadoguchi, M Kohda, and J Nitta Observation of spin-splitter torque in collinear antiferromagnetic RuO2 Phys. p. 3 Rev. Lett. 129 137201 (2022), [13] E Sasioglu, I Mertig, and S Lounis, d-wave surface altermagnetism in centrosymmetric collinear antiferromagnets (2026), arXiv:2602. p. 308790, [15] K D Belashchenko, Equilibrium magnetization at the boundary of a magnetoelectric antiferromagnet Phys. p. 3 Rev. Lett. 105 147204 (2010), [16] K D Belashchenko, Deterministic electrical switching in altermagnets via surface antisymmetry groups (2026), arXiv:2603. p. 306537, [17] H Heesch, Über die vierdimensionalen Gruppen des dreidimensionalen Raumes, Z Kristallogr Cryst Mater 73 325 (1930), [20] I Turek, Altermagnetism and magnetic groups with pseudoscalar electron spin Phys. p. 3 Rev. B 106 094432 (2022), [23] S V Gallego, J M Perez-Mato, L Elcoro, E S Tasci, R M Hanson, K Momma, M I Arroyo, and G Madariaga MAGNDATA: towards a database of magnetic structures. p. 4 I The commensurate case J Appl Crystallogr 49 1750 (2016), [24] I Mazin, R González-Hernández, and L Šmejkal Induced monolayer altermagnetism in mnp(s,se)3 and fese (2023), arXiv:2309. p. 402355, [25] X Chen, J Ren, Y Zhu, Y Yu, A Zhang, P Liu, J Li, Y Liu, C Li, and Q Liu Enumeration and representation theory of spin space groups Phys. p. 4 Rev. X 14 031038 (2024), [26] J Železný, H Gao, A Manchon, F Freimuth, Y Mokrousov, J Zemen, J Mašek, J Sinova, and T Jungwirth Spin-orbit torques in locally and globally noncentrosymmetric crystals Antiferromagnets and ferromagnets Phys. p. 4 Rev. B 95 014403 (2017), [27] H Watanabe and Y Yanase, Symmetry analysis of current-induced switching of antiferromagnets Phys. p. 4 Rev. B 98 220412(R) (2018). p. 4 The paper is titled Roughness-robust surface altermagnetism in PT antiferromagnets. p. 0 This paper is 2606. p. 011128. EVERY sentence must end with a reference token and the token names the page it came from and quotes the words it rests on, copied word for word from that page>. Write the token BARE, with no backticks around it as a reference and not as a code span. p. 2
Roughness-robust surface altermagnetism in P T antiferromagnets extends spin splitting beyond bulk altermagnets through symmetry reduction at surfaces and interfaces. p. 0 The classification of macroscopic spin-momentum correlations at compensated rough surfaces of spin-degenerate antiferromagnets is governed by the surface antisymmetry Laue point group (SALPG) which depends only on the bulk antisymmetry point group and the surface orientation.
The surface antisymmetry Laue point group (SALPG) is determined by the little group of nˆ obtained from the bulk APG G as Gnˆ = The set of surface altermagnetic classes is the same as in the flat-surface classification of Ref. [12], but here they refer to macroscopic spin-momentum correlations at a rough surface.
Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.
Improvements for AI systems
-
Improved AI can classify surface altermagnetism by determining if it is forbidden based on bulk symmetry operations, as
Rough-surface altermagnetism is forbidden at any surface of a magnet whose antisymmetry space group contains antitranslations.
-
Improved AI can predict the resulting macroscopic spin-momentum correlations for a given surface orientation and bulk APG by calculating the Surface Antisymmetry Laue point group (SALPG), as
The symmetry of macroscopic rough-surface responses is determined by the little group of nˆ obtained from the bulk APG G as Gnˆ = 1
. -
Improved AI can distinguish between spin-degenerate surface altermagnets and other classes by analyzing the SALPG, identifying
spin-degenerate surface altermagnets (SD-SAM)
wherespin degeneracy is enforced by the 2mz operation in Lnˆ (where zˆ∥ nˆ)
. -
Improved AI can predict which bulk APGs permit rough-surface altermagnetism by filtering out those with antitranslations, as
Roughness averaging eliminates surface altermagnetism in all magnets with antitranslations and restricts the problem to P T-symmetric antiferromagnets.
-
Improved AI can assess the potential for deterministic electrical switching by checking if the bulk APG allows for it, noting that
The APGs of most PT-AFMs allow deterministic electrical switching of the Néel vector through bulk staggered current-induced torques
.
Sources
- Altermagnetic spintronics
- Emergent altermagnetism at surfaces of antiferromagnets: full symmetry classification and material identification
- $d$-wave Surface Altermagnetism in Centrosymmetric Collinear Antiferromagnets
- Direct demonstration of time-reversal-symmetry-breaking spin injection from a compensated magnet
- Deterministic Electrical Switching in Altermagnets via Surface Antisymmetry Groups
- Induced Monolayer Altermagnetism in MnP(S,Se)$_3$ and FeSe
Related papers
- Structural contribution to light-induced gap suppression in Ta 2 NiSe 5
- Anatomy of fast current-induced skyrmion motion in synthetic antiferromagnets
- Magnetic control of an exciton-polariton condensate in a van der Waals magnet
- High-pressure elastic properties of GeO2 polymorphs up to 120 GPa
- Decoupling Strain-Rate Sensitivity and Deformation Length Scale Effects in Neutron-Irradiated Tungsten: A Coupled Nano-Indentation, HR-EBSD and Crystal Plasticity Study
- Magnetism modulation in Co3Sn2S2 by current-assisted domain wall motion