First-principles description of pumped inelastic X-ray scattering: example of K-edge RIXS in graphite

arXiv:2606.09440 · cond-mat.mtrl-sci · Submitted 2026-06-08 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Condensed Matter. The day in condensed matter: materials, phases and the measurements under them.

Kai: We're looking at the paper: "First-principles description of pumped inelastic X-ray scattering".

Mira: Here's the gist of the paper. First-principles description of pumped inelastic X-ray scattering: example of K-edge RIXS in graphite is an ab initio framework for predicting resonant inelastic X-ray scattering (RIXS) in optically pumped materials.

Kai: This methodology combines the Kramers-Heisenberg formula with results from many-body perturbation theory and time-dependent density functional theory to study RIXS dynamics, which is crucial for understanding non-equilibrium phenomena in solids.

Mira: Theoretical Framework The theoretical approach utilizes the Kramers-Heisenberg formula to describe the double-differential cross section of RIXS, based on results from many-body perturbation theory via the Bethe-Salpeter equation (BSE).

Kai: The excited states are described using BSE in the Tamm–Dancoff approximation, which explicitly captures excitonic effects essential for accurate descriptions of valence and core-level excitations.

Paper summary: Kai: This paper introduces an ab initio framework for predicting resonant inelastic X-ray scattering in optically pumped materials using first principles.

Mira: The thesis is combining the Kramers Heisenberg formula with results from many body perturbation theory through the Bethe-Salpeter equation to study RIXS dynamics.

Lev: It specifically uses real time time dependent density functional theory to incorporate non equilibrium charge carrier distributions into those calculations.

Kai: The core claim is that generalizing the RIXS implementation with respect to arbitrary polarizations allows us to consider different orientations of incoming and outgoing light.

Mira: They demonstrate this by studying RIXS at the carbon K edge of graphite for various non equilibrium charge carrier distributions, which represent different delay times after optical excitation.

Lev: The methodology is built on DFT calculations providing the basis for obtaining the dielectric tensors used in those Bethe-Salpeter equation calculations.

Kai: It’s important because it gives us a way to understand non equilibrium phenomena in solids by linking these fundamental quantum mechanical equations to observable scattering spectra.

Mira: And because they show good agreement with experiment for the main spectral features, even though there are minor deviations due to electron-phonon coupling, it’s a solid tool for prediction.

Conclusion: Kai: So, looking at "First-principles description of pumped inelastic X-ray scattering: example of K-edge RIXS in graphite," the authors have created a compact, general approach to compute polarization and time resolved RIXS spectra.

Mira: They show that you can capture the characteristic anisotropy of materials like graphite in both static and non equilibrium scenarios using this framework.

Lev: What this means practically is that we can use this to design experiments where we know exactly what kind of light we need to pump and measure to get specific spectral information about the material's electronic structure.

Kai: It’s a fully parameter free approach, which simplifies things because you don't have to rely on material specific fitting parameters for every single calculation.

Mira: The implication is that this method provides a solid path forward for predicting how materials will behave after they get excited by an optical pump in a real experiment.

Lev: It’s a tool that can handle the complexity of non equilibrium charge carrier distributions without needing to solve impossibly large many body problems from scratch every time.

Elias Richter, Benedikt Maurer, Claudia Draxl

Department of Physics and CSMB, Humboldt-Universität zu Berlin · European Theoretical Spectroscopy Facility (ETSF)

cond-mat.mtrl-sci

Submitted: 2026-06-08

Updated: 2026-10-02

Comments: 10 pages, 8 figures

Journal ref: J. Chem. Phys. 165, 154110 (2026)

DOI: 10.1063/5.0347858

Code: https://github.com/exciting/BRIXS

License: http://creativecommons.org/licenses/by/4.0/

Importance score: 79/100

The gist: First-principles description of pumped inelastic X-ray scattering: example of K-edge RIXS in graphite is an ab initio framework for predicting resonant inelastic X-ray scattering (RIXS) in optically…

Key concepts

Kramers-Heisenberg formula
This formula is used to calculate the double-differential cross section of RIXS, which describes how much X-ray scattering occurs when an electron absorbs a photon and then emits another. It provides the mathematical link between the initial state, intermediate states, and final states in this inelastic process.
Bethe-Salpeter equation (BSE)
The BSE is a many-body perturbation theory tool used to describe excited electronic states, particularly excitonic effects. In this context, it helps accurately model how electrons move and interact within the material after being excited by an X-ray photon, which is crucial for understanding core-level excitations.
Time-dependent density functional theory (TDDFT)
TDDFT is a computational method used to simulate how electronic systems change over time, especially when they are not in equilibrium. It allows the researchers to calculate non-equilibrium occupation factors, which are necessary to model the effects of an optically pumped system where energy is being added.
Polarization-dependent RIXS
This refers to how the scattering signal changes depending on the direction of the incident and scattered X-rays relative to the material's structure. The study found that graphite shows distinct spectral regions for in-plane versus out-of-plane polarizations, revealing its inherent electronic anisotropy.

Terminology

Summary

First-principles description of pumped inelastic X-ray scattering: example of K-edge RIXS in graphite is an ab initio framework for predicting resonant inelastic X-ray scattering (RIXS) in optically pumped materials. p. 0

Where the paper says it

richter@physik. de) We present an ab initio framework for predicting resonant inelastic X-ray scattering (RIXS) in optically pumped materials.

This methodology combines the Kramers-Heisenberg formula with results from many-body perturbation theory and time-dependent density functional theory to study RIXS dynamics, which is crucial for understanding non-equilibrium phenomena in solids. p. 0
Where the paper says it

Our methodology is based on the Kramers-Heisenberg formula for the double-differential cross section formulated using the results of the Bethe-Salpeter equation (BSE) from many-body perturbation theory. To extend this approach to the time domain, we incorporate non-equilibrium charge-carrier distributions obtained from real-time, time-dependent density-functional theory (RT-TDDFT).

Theoretical Framework

The theoretical approach utilizes the Kramers-Heisenberg formula to describe the double-differential cross section of RIXS, based on results from many-body perturbation theory via the Bethe-Salpeter equation (BSE). The excited states are described using BSE in the Tamm–Dancoff approximation, which explicitly captures excitonic effects essential for accurate descriptions of valence and core-level excitations. p. 1

Where the paper says it

Thus, it explicitly captures excitonic effects, which are essential for an accurate description of both valence and core-level excitations62–65. Within the Tamm–Dancoff approximation, it can be cast into an effective eigenvalue problem, X o ′u′k′ HBSE ouk,o′u′k′A λ o ′u′k′ = E λA λ o ′u′k′ , (2) where Aλ ouk is the excitonic eigenvector, Eλ is the corresponding exciton energy, and k indicates points in the reciprocal space.

The RIXS oscillator strength is constructed by combining the core absorption oscillator strength and the excitation pathway. p. 2
Where the paper says it

3 the final state |λ0⟩ by the excitation pathway t (2) λ0,λc = X cvk X µ A λ0 cvk [e ∗ 2 · Pµvk] h A λc cµk i∗ . (4) Combining the two, allows to introduce the RIXS oscillator strength t (3) λ0 (ω1) t (3) λ0 (ω1) = X λc t (2) λ0,λc t (1) λc ω1 − Eλc + iη , (5) and to write the DDCS as d 2σ dΩ2dω2 = α 4 ω2 ω1 ImX λ0 t (3) λ0 (ω1) 2 (ω1 − ω2) − Eλ0 + iη .

Implementation Details

The implementation involves a workflow where DFT calculations provide the basis for obtaining dielectric tensors used in BSE calculations. The method is extended to include time-resolved RIXS (tr-RIXS) by employing RT-TDDFT to obtain non-equilibrium occupation factors. p. 2

Where the paper says it

Furthermore, we extended the method to obtain time-resolved RIXS (tr-RIXS) spectra. For this case, exciting’s RT-TDDFT framework68 is employed to simulate the propagation of the system for a given pump setup and obtain the corresponding electron and hole distributions69,70.

These occupation factors modify both the screened Coulomb interaction and the electron–hole interaction kernel in subsequent BSE calculations. p. 2
Where the paper says it

First, the obtained nonequilibrium occupation numbers are used in subsequent BSE calculations for valence and core-level excitations. They modify the screened Coulomb interaction and, through Fouk(t), also the electron–hole interaction kernel, which is symmetrized accordingly and thus remains Hermitian.

Furthermore, these factors explicitly enter the RIXS pathways to account for Pauli blocking. p. 2
Where the paper says it

This accounts for Pauli blocking. Since t (3) is a coherent combination of t (1) and t (2) , the occupation factors modify both the weights and the interference of the individual RIXS pathways.

Application to Graphite

The study focuses on the carbon K-edge RIXS of graphite, leveraging its prototypical layered structure and electronic anisotropy. The analysis reveals distinct π- and σ-derived spectral regions that are strongly polarization-dependent, in good agreement with experimental observations. p. 0

Where the paper says it

We demonstrate our method’s capabilities by studying RIXS at the K-edge of graphite for various non-equilibrium charge-carrier distributions, representing different delay times after optical pumping. Our results reveal angular dependencies in π- and σ-orbital-derived spectral regions, in good agreement with experiment.

Specifically, the in-plane polarizations show σ-derived excitations above 8 eV, while out-of-plane polarizations are dominated by low energy-loss features involving π-type excitations. p. 4
Where the paper says it

For in-plane polarizations, the energy-loss spectrum is primarily characterized by σ-derived excitations at energies above 8 eV, reflecting transitions that involve deeper valence states of σ character. In contrast, the out-of-plane polarizations are dominated by low energy-loss features involving π-type excitations.

Time Domain Dynamics

For pumped RIXS (tr-RIXS), the system is simulated using RT-TDDFT to obtain time-dependent electronic occupations. The results show that the optical excitation induces only moderate modifications to the spectra, with changes consisting mainly of small shifts and redistributions of relative spectral weights. p. 6

Where the paper says it

These changes consist mainly of small shifts and redistributions of relative spectral weights rather than the emergence of additional excitations and only occur in a region of relatively small absolute RIXS intensity. For mixed polarization, we display tr-RIXS results for two setups in Fig.

While subtle modifications occur for polarization along z, the calculated spectra reproduce experimental features well up to energy losses of 12 eV. p. 6
Where the paper says it

In general, the non-equilibrium spectra closely resemble their equilibrium counterparts and deviations remain subtle. Nonetheless, the calculated spectra reproduce experimental features well up to energy losses of 12 eV, including a persistent shift in the 7–15 eV region, which appears considerably less pronounced than at equilibrium.

Conclusion

The work presents a compact, general, and fully parameter-free approach to compute polarization- and time-resolved RIXS spectra in complex materials. The method successfully demonstrates the ability to capture characteristic anisotropy of graphite in both static and nonequilibrium scenarios. p. 8

Where the paper says it

Using the carbon K-edge of the semimetal graphite as a representative example, we have demonstrated this approach for static and nonequilibrium RIXS spectra. Our results reflect the characteristic anisotropy of graphite, showing up in distinct πand σ-derived features and their evolution with incident photon energy, in excellent agreement with experiment.

The results show good agreement with experiment for the main spectral features, despite minor deviations attributed to electron-phonon coupling. p. 5
Where the paper says it

Overall, the main spectral features reproduce the peak positions observed in experiment. Remaining minor deviations may be attributed to electron–phonon coupling effects45, which are not included in the present approach, and from performing BSE on top of DFT rather than using GW quasi-particle energies.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Generalization of RIXS implementation allows for considering different orientations of incoming and outgoing light by generalizing with respect to arbitrary polarizations. This enables the AI system to predict scattering cross sections for various polarization states beyond simple parallel or perpendicular setups.

  2. Incorporation of non-equilibrium charge-carrier distributions obtained from real-time, time-dependent density-functional theory (RT-TDDFT) allows the AI system to simulate pump induced changes in charge, spin, orbital, and lattice excitations. This enables the AI to track transient changes in correlated materials following an optical pump.

  3. The framework combines RT-TDDFT and BSE to predict polarization and time-resolved RIXS spectra for arbitrary scattering geometries. The improved AI can calculate the double-differential cross section using the generalized Kramers-Heisenberg formula, providing insights into momentum and polarization resolved spectral features of materials like graphite.

  4. The system can perform ab initio calculations for both static and non-equilibrium RIXS spectra by incorporating non-equilibrium occupation factors into subsequent BSE calculations. This allows the AI to account for Pauli blocking effects in time-resolved simulations, modifying the weights and interference of individual pathways.

Abstract

We present an ab initio framework for predicting resonant inelastic X-ray scattering (RIXS) in optically pumped materials. Our methodology is based on the Kramers-Heisenberg formula for the double-differential cross section formulated using the results of the Bethe-Salpeter equation (BSE) from many-body perturbation theory. To extend this approach to the time domain, we incorporate non-equilibrium charge-carrier distributions obtained from real-time, time-dependent density-functional theory (RT-TDDFT). Generalizing the RIXS implementation with respect to arbitrary polarizations, allows us to consider different orientations of incoming and outgoing light. We demonstrate our method's capabilities by studying RIXS at the K-edge of graphite for various non-equilibrium charge-carrier distributions, representing different delay times after optical pumping. Our results reveal angular dependencies in π - and σ-orbital-derived spectral regions, in good agreement with experiment.

Sources

Related papers