Advances in electrical contacts to single crystals of emerging materials for transport measurements

arXiv:2606.00173 · cond-mat.mtrl-sci, physics.app-ph · Submitted 2026-05-29 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Condensed Matter. The day in condensed matter: materials, phases and the measurements under them.

Kai: We're looking at the paper: "Advances in electrical contacts to single crystals of emerging materials for transport measurements".

Mira: Here's the gist of the paper. Transport measurements that probe electrical resistivity of a material under varying external stimuli, such as temperature, magnetic field, optical illumination, and gate voltage, are among the most important experimental techniques in condensed matter physics <ref:2606.00173#pg2> In this review we highlight recent technological advancements in the fabrication of high-quality, lithographically defined multi-terminal electrodes on both exfoliable and nonexfoliable single crystals for transport measurements <ref:2606.00173#pg3> This work provides a practical guide for researchers seeking to select appropriate contact-fabrication strategies tailored to unique characteristics of emerging crystals <ref:2606.00173#pg6> Challenges in Contact Establishment Newly synthesized single crystals often pose substantial challenges in establishing reliable electrical contacts due to their irregular geometries, limited dimensions, inherent structural characteristics, and potential susceptibility to degradation <ref:2606.00173#pg5> Traditional manual placement of thin metal wires onto as-grown single crystals under an optical microscope and securing them with conductive adhesives remains one of the few viable solutions for single-crystal device fabrication <ref:2606.00173#pg6> This manual technique requires crystals of at least millimeter-scale dimensions and demands extensive user skills to manually position metal wires without electrically shorting each other <ref:2606.00173#pg6> Furthermore, the lack of capabilities to precisely control over contact geometries or for systematic contact optimization significantly limits the device quality <ref:2606.00173#pg6> Poor contacts can compromise device performance and, in some cases, lead to misinterpretation of transport behaviors by failing to resolve subtle variations in channel resistance <ref:2606.00173#pg6> Planarization Methodologies Recent developments in single-crystal device microfabrication, particularly those enabled lithography-based patterning and etching processes, have significantly advanced electrical transport studies of emerging single crystals <ref:2606.00173#pg7> Three key planarization approaches enable the realization of in-plane multi-terminal electrodes through lithographic processes: (1) mechanical exfoliation of layered crystals to obtain thin flakes, (2) thin lamella lift-out using the focused ion beam (FIB) technique, and (3) bulk crystal planarization via polymeric embedding <ref:2606.00173#pg7> (1) Mechanical exfoliation of layered crystals represents a major class of materials that have attracted substantial interest in recent transport studies due to their intrinsic two-dimensional (2D) nature <ref:2606.00173#pg8> Efforts to exfoliate and transfer layered transition metal dichalcogenides (TMDs) predate the successful isolation of monolayer graphene in 2004 via the widely known “Scotch tape method” <ref:2606.00173#pg9> Electron-beam lithography (EBL) has become the technique of choice for fabricating such small-scale 2D devices, owing to its sub-micron resolution and high patterning flexibility <ref:2606.00173#pg9> (2) FIB-based multi-terminal bulk device fabrication is adopted because it enables the preparation of thin lamellas from bulk crystals and the fabrication of multi-terminal transport devices <ref:2606.00173#pg10> This technique allows for probing electronic anisotropies by carving lamellae along specific crystallographic orientations, such as in SmFeAs(O, F) crystals However, the use of high-energy ion beam inevitably induces structural defects or unintentional doping in the vicinity of crystal surface (3) Polymeric planarization strategies represent a bottom-up strategy that involves filling the gap between the substrate and the top surface of a small, bulk crystal using a polymeric matrix This technique enables a flat, uniform surface compatible with standard microfabrication processes through UV-curable adhesive curing For strain-sensitive systems such as phase-change materials, the low-stress polyimide planarization method is preferred to preserve their intrinsic transport properties Dielectric Encapsulation Strategies A significant subset of materials is highly sensitive to ambient conditions, necessitating the use of dielectric encapsulation layers to protect pristine crystal surfaces from oxygen and moisture Hexagonal boron nitride (h-BN) plays a pivotal role as an effective encapsulation layer for air-sensitive 2D materials For polymer-planarized, nonexfoliable crystals, polyimide-based encapsulation combined with lithographically defined VIA structures offers a promising route for handling air-sensitive bulk crystals Transfer-Based Electrode Integration A promising strategy to improve electrical contacts to TMDs involves the transfer of prepatterned metal electrodes rather than through direct metal deposition This method circumvents chemical disorder and defect-induced gap states commonly introduced from metal evaporation processes Examples include laminating atomically flat metal electrodes onto the clean, dangling-bond-free surfaces of TMDs to form van der Waals (vdW) metal-semiconductor junctions Charge-transfer contacts can be used to create low-resistance p-type Ohmic contact to monolayer WSe2 by inducing strong hole doping in the contact region Depending on a material’s exfoliability, available sample dimensions, and propensity to degradation, a range of techniques can be strategically employed <ref:2606.00173#pg5> Each contact fabrication strategy still presents certain limitations and only works well for specific materials <ref:2606.00173#pg5> Continued research efforts are needed to further optimize contact fabrication procedures for non-exfoliable crystals in a manner comparable to conventional semiconductors and 2D materials <ref:2606.00173#pg6> Page 1 --- Advances in electrical contacts to single crystals of emerging materials for transport measurements Huandong Chen, Abhay N.

Kai: Pasupathy, Jayakanth Ravichandran Mork Family Department of Chemical Engineering and Materials Science, University of Southern California, Los Angeles, CA, USA Condensed Matter Physics and Materials Science Department, Brookhaven National Laboratory, Upton NY, USA Department of Physics, Columbia University Academic transport measurements that probe electrical resistivity of a material under varying external stimuli <ref:2606.00173#pg2> These measurements provide critical insights into the fundamental electronic properties of materials <ref:2606.00173#pg3> In recent years, they have facilitated the discovery and exploration of intriguing physical phenomena (e.g., superconductivity and quantum oscillations) and unique device functionalities(e.g., photoresponse and electrostatic gating effects) in various emerging materials, particularly in the form of single crystals <ref:2606.00173#pg3> However, unlike large-scale wafers or thin films, newly synthesized single crystals often pose substantial challenges in establishing reliable electrical contacts due to their irregular geometries, limited dimensions, inherent structural characteristics, and potential susceptibility to degradation <ref:2606.00173#pg5> In this review we highlight recent technological advancements in the fabrication of high-quality, lithographically defined multi-terminal electrodes on both exfoliable and nonexfoliable single crystals for transport measurements <ref:2606.00173#pg6> Keywords: single crystals; exfoliable; non-exfoliable; transport measurements; planarization; contact optimization Page 2 --- Abstract Transport measurements that probe electrical resistivity of a material under varying external stimuli, such as temperature, magnetic field, optical illumination, and gate voltage, are among the most important experimental techniques in condensed matter physics <ref:2606.00173#pg2> These measurements provide critical insights into the fundamental electronic properties of materials <ref:2606.00173#pg3> In recent years, they have facilitated the discovery and exploration of intriguing physical phenomena (e.g., superconductivity and quantum oscillations) and unique device functionalities(e.g., photoresponse and electrostatic gating effects) in various emerging materials, particularly in the form of single crystals <ref:2606.00173#pg3> However, unlike large-scale wafers or thin films, newly synthesized single crystals often pose substantial challenges in establishing reliable electrical contacts due to their irregular geometries, limited dimensions, inherent structural characteristics, and potential susceptibility to degradation <ref:2606.00173#pg5> In this review we highlight recent technological advancements in the fabrication of high-quality, lithographically defined multi-terminal electrodes on both exfoliable and nonexfoliable single crystals for transport measurements <ref:2606.00173#pg6> Keywords: single crystals; exfoliable; non-exfoliable; transport measurements; planarization; contact optimization Page 3 --- 1 Introduction Electrical transport measurements, enabled by successful establishment of high-quality electrical contacts, represent one of the most extensively employed experimental techniques for discovering novel physical phenomena and demonstrating unique electronic functionalities in emerging materials <ref:2606.00173#pg2> Particularly, single-crystal forms of materials, with the absence of grain boundaryrelated defects, provide an ideal platform for probing intrinsic electrical properties closely tied to their crystallographic structurers <ref:2606.00173#pg2> Additional advantages of transport studies on single crystals include the ability to investigate electronic anisotropy <ref:2606.00173#pg3>, establish benchmark performance metrics, and facilitate direct comparison with theoretical models <ref:2606.00173#pg3> Figure 1a shows several examples of recently developed single-crystal materials that have attracted significant research interest, including the flat-band lattice metal Pd5AlI2 <ref:2606.00173#pg4>, the heavy-fermion metal CeSiI <ref:2606.00173#pg5>, the Kagome metal CsV3Sb5 <ref:2606.00173#pg6>, the photoactive semiconductor BaZrS3 <ref:2606.00173#pg6>, the phase-change chalcogenide BaTiS3 and the Dirac/Weyl semimetals such as ZrTe5 <ref:2606.00173#pg9>, TaAs <ref:2606.00173#pg10> and Cd3As2 Notably, these single crystals, typically synthesized through laboratory-scale techniques such as chemical vapor transport (CVT) or molten-flux growth methods, often exhibit irregular shapes and limited lateral dimensions ranging from a few hundred micrometers to several millimeters <ref:2606.00173#pg6> On the other hand, specific multi-terminal contact geometries are often essential for transport measurements under various external perturbations such as temperature, gate voltage, and magnetic field Figure 1b and 1c depict several archetypal transport experiments alongside the commonly adopted contact geometries of devices Page 3 --- 3 Introduction Electrical transport measurements, enabled by successful establishment of high-quality electrical contacts, represent one of the most extensively employed experimental techniques for discovering novel physical phenomena and demonstrating unique electronic functionalities in emerging materials <ref:2606.00173#pg2> Particularly, single-crystal forms of materials, with the absence of grain boundaryrelated defects, provide an ideal platform for probing intrinsic electrical properties closely tied to their crystallographic structurers <ref:2606.00173#pg2> Additional advantages of transport studies on single crystals include the ability to investigate electronic anisotropy <ref:2606.00173#pg3>, establish benchmark performance metrics, and facilitate direct comparison with theoretical models <ref:2606.00173#pg3> Figure 1a shows several examples of recently developed single-crystal materials that have attracted significant research interest, including the flat-band lattice metal Pd5AlI2 <ref:2606.00173#pg4>, the heavy-fermion metal CeSiI <ref:2606.00173#pg5>, the Kagome metal CsV3Sb5 <ref:2606.00173#pg6>, the photoactive semiconductor BaZrS3 <ref:2606.00173#pg6>, the phase-change chalcogenide BaTiS3 and the Dirac/Weyl semimetals such as ZrTe5 <ref:2606.00173#pg9>, TaAs <ref:2606.00173#pg10> and Cd3As2 Notably, these single crystals, typically synthesized through laboratory-scale techniques such as chemical vapor transport (CVT) or molten-flux growth methods, often exhibit irregular shapes and limited lateral dimensions ranging from a few hundred micrometers to several millimeters <ref:2606.00173#pg6> On the other hand, specific multi-terminal contact geometries are often essential for transport measurements under various external perturbations such as temperature, gate voltage, and magnetic field Page 4 --- 4 Figure 1 Emerging crystals and transport measurements.

Mira: (a) Optical images of representative emerging single crystals.

Kai: Pd5AlI2, Ref.

Title and authors: Kai: So we’re looking at this paper titled "Advances in electrical contacts to single crystals of emerging materials for transport measurements" today. It's really about how we get those reliable electrical connections on these new single crystals that are so hard to work with.

Mira: Exactly. It points out that transport measurements, which probe things like temperature or magnetic fields, are super important for finding new physics in these emerging materials, but the real hurdle is always making those contacts work properly.

Lev: Yeah, the paper highlights how newly synthesized single crystals often have irregular shapes and limited dimensions that make getting a good electrical connection really tough.

Kai: It shows that traditional ways of just sticking thin wires onto them under a microscope aren't really cutting it anymore, especially for getting detailed measurements.

Mira: They highlight recent technological advancements in making high-quality, lithographically defined multi-terminal electrodes on both exfoliable and nonexfoliable crystals. That’s the core focus here.

The paper's summary: Kai: Okay, so what the paper is actually saying is that they're showing us new ways to create these contacts using lithography. They've broken it down into three main planarization approaches for getting those in-plane electrodes.

Mira: Right. They focus on three key methods: first, mechanical exfoliation of layered crystals to get thin flakes; second, using the focused ion beam or FIB technique for thin lamella lift-out from bulk crystals; and third, bulk crystal planarization by embedding it in a polymer matrix.

Lev: The paper mentions that mechanical exfoliation is a big deal because it deals with those two-dimensional nature of some materials, like transition metal dichalcogenides.

Kai: And they point out that electron beam lithography or EBL is becoming the preferred technique for fabricating those small-scale two dimensional devices because of its resolution and flexibility.

Mira: They also bring up the FIB technique for bulk crystals, which lets you carve lamellae along specific crystallographic orientations, like in SmFeAs(O, F) crystals. But they do warn that using a high energy ion beam can introduce structural defects or unintentional doping near the crystal surface.

The paper's improvements: Kai: Moving on to the improvements they suggest, one big thing is using FIB milling to define multi-terminal transport devices from sub-millimeter, nonexfoliable crystals. This lets researchers actually extract key electronic parameters like resistivity and carrier concentration on materials that are otherwise impossible to cleave.

Mira: That addresses a major limitation they pointed out earlier—the difficulty of getting good contacts on bulk crystals without destroying the crystal structure too much.

Lev: For us, if you're building real hardware, being able to get those accurate parameters from non-exfoliable crystals through FIB sounds like it solves a real problem for characterizing material quality.

Kai: They also discuss dielectric encapsulation strategies for air sensitive crystals. They suggest using hexagonal boron nitride or polyimide combined with lithographically defined vias for handling bulk materials that are sensitive to oxygen and moisture.

Mira: That makes sense, because those pristine crystal surfaces can degrade quickly in the air, so having a protective layer is necessary for reliable measurements.

Conclusion: Kai: So wrapping up this paper on "Advances in electrical contacts to single crystals of emerging materials for transport measurements," the main point is that you need a tailored strategy based on what kind of crystal you have—whether it's exfoliable or not, and how sensitive it is.

Mira: They emphasize that each contact fabrication strategy still has its own limitations, and they stress that continued research is needed to optimize these procedures for non-exfoliable crystals in a way that matches conventional semiconductors.

Lev: For practical purposes, if you're trying to get reliable transport measurements on these materials, you have to be very careful about which method you pick because the results depend entirely on the material’s specific characteristics and how well the contact is made.

Kai: So yeah, it’s a guide for researchers wanting to select the right fabrication strategy based on those specific crystal traits. It shows where we need to focus our efforts next.

Mira: Definitely. We'll keep looking at these advancements in planarization because getting better contacts is what lets us actually see the fundamental properties of these interesting new materials properly.

Lev: Yeah, the paper gives us a good roadmap for how to build better measurement tools for these complex single crystals.

Huandong Chen, Abhay N. Pasupathy, Jayakanth Ravichandran

Mork Family Department of Chemical Engineering and Materials Science, University of Southern California · Condensed Matter Physics and Materials Science Department, Brookhaven National Laboratory · Department of Physics, Columbia University · Ming Hsieh Department of Electrical and Computer Engineering, University of Southern California · Core Center of Excellence in Nano Imaging, University of Southern California

cond-mat.mtrl-sci, physics.app-ph

Submitted: 2026-05-29

Updated: 2026-11-09

License: http://creativecommons.org/licenses/by/4.0/

Importance score: 83/100

The gist: Transport measurements that probe electrical resistivity of a material under varying external stimuli, such as temperature, magnetic field, optical illumination, and gate voltage…

Key concepts

Transport Measurements
These are experiments that measure how electricity flows through a material when subjected to external changes like temperature or magnetic fields. They are crucial for understanding the fundamental electronic properties of materials, such as their resistivity and how they behave under different conditions.
Planarization Methods
These are techniques used to create flat surfaces on single crystals, which is necessary for making good electrical contacts. The paper discusses three main approaches: mechanical exfoliation to get thin flakes, Focused Ion Beam (FIB) lift-out for lamellae, and polymeric embedding for bulk crystals.
Dielectric Encapsulation
This involves surrounding sensitive single crystals with protective layers like hexagonal boron nitride (h-BN) or polyimide. This protection shields the crystal surface from environmental factors like oxygen and moisture, which is vital for maintaining the material's pristine electrical properties during transport studies.

Terminology

Summary

Transport measurements that probe electrical resistivity of a material under varying external stimuli, such as temperature, magnetic field, optical illumination, and gate voltage, are among the most important experimental techniques in condensed matter physics <ref:2606. p. 1

Where the paper says it

2 Abstract Transport measurements that probe electrical resistivity of a material under varying external stimuli, such as temperature, magnetic field, optical illumination, and gate voltage, are among the most important experimental techniques in condensed matter physics. These measurements provide critical insights into the fundamental electronic properties of materials.

00173#pg2> In this review we highlight recent technological advancements in the fabrication of high-quality, lithographically defined multi-terminal electrodes on both exfoliable and nonexfoliable single crystals for transport measurements <ref:2606. p. 1
Where the paper says it

However, unlike large-scale wafers or thin films, newly synthesized single crystals often pose substantial challenges in establishing reliable electrical contacts due to their irregular geometries, limited dimensions, inherent structural characteristics, and potential susceptibility to degradation. In this review, we highlight recent technological advancements in the fabrication of high-quality, lithographically defined multi-terminal electrodes on both exfoliable and nonexfoliable single crystals for transport measurements.

00173#pg3> This work provides a practical guide for researchers seeking to select appropriate contact-fabrication strategies tailored to unique characteristics of emerging crystals <ref:2606. p. 1
Where the paper says it

In this review, we highlight recent technological advancements in the fabrication of high-quality, lithographically defined multi-terminal electrodes on both exfoliable and nonexfoliable single crystals for transport measurements. Our work provides a practical guide for researchers seeking to select appropriate contact-fabrication strategies tailored to unique characteristics of emerging crystals.

00173#pg6>

Challenges in Contact Establishment

Newly synthesized single crystals often pose substantial challenges in establishing reliable electrical contacts due to their irregular geometries, limited dimensions, inherent structural characteristics, and potential susceptibility to degradation <ref:2606.00173#pg5> Traditional manual placement of thin metal wires onto as-grown single crystals under an optical microscope and securing them with conductive adhesives remains one of the few viable solutions for single-crystal device fabrication <ref:2606. p. 4

Where the paper says it

In contrast to wafer-scale substrates or thin films, the fabrication of such versatile multiterminal electrodes with precisely defined contact geometries on laboratory-grown single crystals is often nontrivial. Traditionally, researchers have relied on manually placing thin metal wires onto as-grown single crystals under an optical microscope and securing them with conductive adhesives, a method that remains one of the few viable solutions for single-crystal device fabrication.

00173#pg6> This manual technique requires crystals of at least millimeter-scale dimensions and demands extensive user skills to manually position metal wires without electrically shorting each other <ref:2606. p. 4
Where the paper says it

3,62 While this technique has played a pivotal role in the discovery of superconductivity and phase transitions in various quantum materials since the 1970s, 63-65 it presents significant limitations. For instance, the method requires crystals of at least millimeter-scale dimensions and demands extensive user skills to manually position metal wires without electrically shorting each other, thereby excluding many interesting but size-limited crystals from systematic transport investigations.

00173#pg6> Furthermore, the lack of capabilities to precisely control over contact geometries or for systematic contact optimization significantly limits the device quality <ref:2606. p. 4
Where the paper says it

For instance, the method requires crystals of at least millimeter-scale dimensions and demands extensive user skills to manually position metal wires without electrically shorting each other, thereby excluding many interesting but size-limited crystals from systematic transport investigations. Furthermore, the lack of capabilities to precisely control over contact geometries or for systematic contact optimization significantly limits the device quality.

00173#pg6> Poor contacts can compromise device performance and, in some cases, lead to misinterpretation of transport behaviors by failing to resolve subtle variations in channel resistance <ref:2606. p. 4
Where the paper says it

Furthermore, the lack of capabilities to precisely control over contact geometries or for systematic contact optimization significantly limits the device quality. These issues are particularly pronounced in gapped systems such as semiconductors, where poor contacts can compromise device performance and, in some cases, lead to misinterpretation of transport behaviors by failing to resolve subtle variations in channel resistance.

00173#pg6>

Planarization Methodologies

Recent developments in single-crystal device microfabrication, particularly those enabled lithography-based patterning and etching processes, have significantly advanced electrical transport studies of emerging single crystals <ref:2606.00173#pg7> Three key planarization approaches enable the realization of in-plane multi-terminal electrodes through lithographic processes: (1) mechanical exfoliation of layered crystals to obtain thin flakes, (2) thin lamella lift-out using the focused ion beam (FIB) technique, and (3) bulk crystal planarization via polymeric embedding <ref:2606. p. 5

Where the paper says it

6,30,66,67 In this review, we present a comprehensive overview of recent technological progress in fabricating high-quality, multi-terminal electrical contacts on emerging exfoliable and non-exfoliable single-crystal materials for transport measurements, with a focus on methodologies for crystal planarization and metallization. We begin by introducing three key planarization approaches that enable the realization of in-plane multi-terminal electrodes through lithographic processes: (1) mechanical exfoliation of layered crystals to obtain thin flakes, (2) thin lamella lift-out using the focused ion beam (FIB) technique, and (3) bulk crystal planarization via polymeric embedding.

00173#pg7>

(1)

Mechanical exfoliation of layered crystals represents a major class of materials that have attracted substantial interest in recent transport studies due to their intrinsic two-dimensional (2D) nature <ref:2606.00173#pg8> Efforts to exfoliate and transfer layered transition metal dichalcogenides (TMDs) predate the successful isolation of monolayer graphene in 2004 via the widely known “Scotch tape method” <ref:2606. p. 6

Where the paper says it

68-71 The recent emergence of heterogeneous integration and twist assembly techniques has further broadened the scope for tuning intriguing properties engineering novel functionalities in these materials. 59,72-74 Notably, efforts to exfoliate and transfer layered transition metal dichalcogenides (TMDs) predate the successful isolation of monolayer graphene in 2004 via the widely known “Scotch tape method”.

00173#pg9> Electron-beam lithography (EBL) has become the technique of choice for fabricating such small-scale 2D devices, owing to its sub-micron resolution and high patterning flexibility <ref:2606. p. 6
Where the paper says it

For example, monolayer or bilayer graphene obtained via regular mechanical exfoliation often exhibits lateral sizes on the orders of ~20 µm, 77,78 while the active regions of twisted TMD devices frequently fall below ~ 10 µm. 79,80 Electron-beam lithography (EBL) has become the technique of choice for fabricating such small-scale 2D devices, owing to its sub-

00173#pg9>

(2)

FIB-based multi-terminal bulk device fabrication is adopted because it enables the preparation of thin lamellas from bulk crystals and the fabrication of multi-terminal transport devices <ref:2606.00173#pg10> This technique allows for probing electronic anisotropies by carving lamellae along specific crystallographic orientations, such as in SmFeAs(O, F) crystals However, the use of high-energy ion beam inevitably induces structural defects or unintentional doping in the vicinity of crystal surface

(3)

Polymeric planarization strategies represent a bottom-up strategy that involves filling the gap between the substrate and the top surface of a small, bulk crystal using a polymeric matrix This technique enables a flat, uniform surface compatible with standard microfabrication processes through UV-curable adhesive curing For strain-sensitive systems such as phase-change materials, the low-stress polyimide planarization method is preferred to preserve their intrinsic transport properties

Dielectric Encapsulation Strategies

A significant subset of materials is highly sensitive to ambient conditions, necessitating the use of dielectric encapsulation layers to protect pristine crystal surfaces from oxygen and moisture Hexagonal boron nitride (h-BN) plays a pivotal role as an effective encapsulation layer for air-sensitive 2D materials For polymer-planarized, nonexfoliable crystals, polyimide-based encapsulation combined with lithographically defined VIA structures offers a promising route for handling air-sensitive bulk crystals

Transfer-Based Electrode Integration

A promising strategy to improve electrical contacts to TMDs involves the transfer of prepatterned metal electrodes rather than through direct metal deposition This method circumvents chemical disorder and defect-induced gap states commonly introduced from metal evaporation processes Examples include laminating atomically flat metal electrodes onto the clean, dangling-bond-free surfaces of TMDs to form van der Waals (vdW) metal-semiconductor junctions Charge-transfer contacts can be used to create low-resistance p-type Ohmic contact to monolayer WSe2 by inducing strong hole doping in the contact region

Conclusion and Outlook

Depending on a material’s exfoliability, available sample dimensions, and propensity to degradation, a range of techniques can be strategically employed <ref:2606.00173#pg5> Each contact fabrication strategy still presents certain limitations and only works well for specific materials <ref:2606. p. 4

Where the paper says it

Traditionally, researchers have relied on manually placing thin metal wires onto as-grown single crystals under an optical microscope and securing them with conductive adhesives, a method that remains one of the few viable solutions for single-crystal device fabrication. 3,62 While this technique has played a pivotal role in the discovery of superconductivity and phase transitions in various quantum materials since the 1970s, 63-65 it presents significant limitations.

00173#pg5> Continued research efforts are needed to further optimize contact fabrication procedures for non-exfoliable crystals in a manner comparable to conventional semiconductors and 2D materials <ref:2606. p. 1
Where the paper says it

Our work provides a practical guide for researchers seeking to select appropriate contact-fabrication strategies tailored to unique characteristics of emerging crystals. Keywords: single crystals; exfoliable; non-exfoliable; transport measurements; planarization; contact optimization.

00173#pg6>

--- Page 1 ---

Advances in electrical contacts to single crystals of emerging materials for transport measurements Huandong Chen, Abhay N. Pasupathy, Jayakanth Ravichandran Mork Family Department of Chemical Engineering and Materials Science, University of Southern California, Los Angeles, CA, USA Condensed Matter Physics and Materials Science Department, Brookhaven National Laboratory, Upton NY, USA Department of Physics, Columbia University Academic transport measurements that probe electrical resistivity of a material under varying external stimuli <ref:2606. p. 0

Where the paper says it

Pasupathy2,3, Jayakanth Ravichandran1,4,5* 1 Mork Family Department of Chemical Engineering and Materials Science, University of Southern California, Los Angeles, CA, USA 2 Condensed Matter Physics and Materials Science Department, Brookhaven National Laboratory, Upton NY, USA 3 Department of Physics, Columbia University, New York, NY, USA 4 Ming Hsieh Department of Electrical and Computer Engineering, University of Southern California, Los Angeles, CA, USA 5 Core Center of Excellence in Nano Imaging, University of Southern California, Los Angeles, CA, USA *Email: hchen3@bnl. ravichandran@usc.

00173#pg2> These measurements provide critical insights into the fundamental electronic properties of materials <ref:2606. p. 1
Where the paper says it

2 Abstract Transport measurements that probe electrical resistivity of a material under varying external stimuli, such as temperature, magnetic field, optical illumination, and gate voltage, are among the most important experimental techniques in condensed matter physics. These measurements provide critical insights into the fundamental electronic properties of materials.

p. 1
Where the paper says it

2 Abstract Transport measurements that probe electrical resistivity of a material under varying external stimuli, such as temperature, magnetic field, optical illumination, and gate voltage, are among the most important experimental techniques in condensed matter physics. These measurements provide critical insights into the fundamental electronic properties of materials.

00173#pg3> In recent years, they have facilitated the discovery and exploration of intriguing physical phenomena (e. p. 1
Where the paper says it

These measurements provide critical insights into the fundamental electronic properties of materials. In recent years, they have facilitated the discovery and exploration of intriguing physical phenomena (e.

p. 1
Where the paper says it

These measurements provide critical insights into the fundamental electronic properties of materials. In recent years, they have facilitated the discovery and exploration of intriguing physical phenomena (e.

g., superconductivity and quantum oscillations) and unique device functionalities(e. p. 1
Where the paper says it

In recent years, they have facilitated the discovery and exploration of intriguing physical phenomena (e. , superconductivity and quantum oscillations) and unique device functionalities(e.

p. 1
Where the paper says it

In recent years, they have facilitated the discovery and exploration of intriguing physical phenomena (e. , superconductivity and quantum oscillations) and unique device functionalities(e.

g., photoresponse and electrostatic gating effects) in various emerging materials, particularly in the form of single crystals <ref:2606. p. 1
Where the paper says it

, superconductivity and quantum oscillations) and unique device functionalities(e. , photoresponse and electrostatic gating effects) in various emerging materials, particularly in the form of single crystals.

p. 1
Where the paper says it

, superconductivity and quantum oscillations) and unique device functionalities(e. , photoresponse and electrostatic gating effects) in various emerging materials, particularly in the form of single crystals.

00173#pg3> However, unlike large-scale wafers or thin films, newly synthesized single crystals often pose substantial challenges in establishing reliable electrical contacts due to their irregular geometries, limited dimensions, inherent structural characteristics, and potential susceptibility to degradation <ref:2606. p. 1
Where the paper says it

, photoresponse and electrostatic gating effects) in various emerging materials, particularly in the form of single crystals. However, unlike large-scale wafers or thin films, newly synthesized single crystals often pose substantial challenges in establishing reliable electrical contacts due to their irregular geometries, limited dimensions, inherent structural characteristics, and potential susceptibility to degradation.

p. 1
Where the paper says it

, photoresponse and electrostatic gating effects) in various emerging materials, particularly in the form of single crystals. However, unlike large-scale wafers or thin films, newly synthesized single crystals often pose substantial challenges in establishing reliable electrical contacts due to their irregular geometries, limited dimensions, inherent structural characteristics, and potential susceptibility to degradation.

00173#pg5> In this review we highlight recent technological advancements in the fabrication of high-quality, lithographically defined multi-terminal electrodes on both exfoliable and nonexfoliable single crystals for transport measurements <ref:2606. p. 1
Where the paper says it

However, unlike large-scale wafers or thin films, newly synthesized single crystals often pose substantial challenges in establishing reliable electrical contacts due to their irregular geometries, limited dimensions, inherent structural characteristics, and potential susceptibility to degradation. In this review, we highlight recent technological advancements in the fabrication of high-quality, lithographically defined multi-terminal electrodes on both exfoliable and nonexfoliable single crystals for transport measurements.

p. 1
Where the paper says it

However, unlike large-scale wafers or thin films, newly synthesized single crystals often pose substantial challenges in establishing reliable electrical contacts due to their irregular geometries, limited dimensions, inherent structural characteristics, and potential susceptibility to degradation. In this review, we highlight recent technological advancements in the fabrication of high-quality, lithographically defined multi-terminal electrodes on both exfoliable and nonexfoliable single crystals for transport measurements.

00173#pg6> Keywords: single crystals; exfoliable; non-exfoliable; transport measurements; planarization; contact optimization

--- Page 2 ---

Abstract Transport measurements that probe electrical resistivity of a material under varying external stimuli, such as temperature, magnetic field, optical illumination, and gate voltage, are among the most important experimental techniques in condensed matter physics <ref:2606.00173#pg2> These measurements provide critical insights into the fundamental electronic properties of materials <ref:2606.00173#pg3> In recent years, they have facilitated the discovery and exploration of intriguing physical phenomena (e.g., superconductivity and quantum oscillations) and unique device functionalities(e.g., photoresponse and electrostatic gating effects) in various emerging materials, particularly in the form of single crystals <ref:2606.00173#pg3> However, unlike large-scale wafers or thin films, newly synthesized single crystals often pose substantial challenges in establishing reliable electrical contacts due to their irregular geometries, limited dimensions, inherent structural characteristics, and potential susceptibility to degradation <ref:2606.00173#pg5> In this review we highlight recent technological advancements in the fabrication of high-quality, lithographically defined multi-terminal electrodes on both exfoliable and nonexfoliable single crystals for transport measurements <ref:2606.00173#pg6> Keywords: single crystals; exfoliable; non-exfoliable; transport measurements; planarization; contact optimization

--- Page 3 ---

1 Introduction Electrical transport measurements, enabled by successful establishment of high-quality electrical contacts, represent one of the most extensively employed experimental techniques for discovering novel physical phenomena and demonstrating unique electronic functionalities in emerging materials <ref:2606.00173#pg2> Particularly, single-crystal forms of materials, with the absence of grain boundaryrelated defects, provide an ideal platform for probing intrinsic electrical properties closely tied to their crystallographic structurers <ref:2606. p. 2

Where the paper says it

Introduction: Electrical transport measurements, enabled by successful establishment of high-quality electrical contacts, represent one of the most extensively employed experimental techniques for discovering novel physical phenomena and demonstrating unique electronic functionalities in emerging materials. 1-3 Particularly, single-crystal forms of materials, with the absence of grain boundaryrelated defects, provide an ideal platform for probing intrinsic electrical properties closely tied to their crystallographic structurers.

p. 2
Where the paper says it

Introduction: Electrical transport measurements, enabled by successful establishment of high-quality electrical contacts, represent one of the most extensively employed experimental techniques for discovering novel physical phenomena and demonstrating unique electronic functionalities in emerging materials. 1-3 Particularly, single-crystal forms of materials, with the absence of grain boundaryrelated defects, provide an ideal platform for probing intrinsic electrical properties closely tied to their crystallographic structurers.

00173#pg2> Additional advantages of transport studies on single crystals include the ability to investigate electronic anisotropy <ref:2606. p. 2
Where the paper says it

1-3 Particularly, single-crystal forms of materials, with the absence of grain boundaryrelated defects, provide an ideal platform for probing intrinsic electrical properties closely tied to their crystallographic structurers. 4-6 Additional advantages of transport studies on single crystals include the ability to investigate electronic anisotropy, 7-9 establish benchmark performance metrics, 10-12 and facilitate direct comparison with theoretical models.

p. 2
Where the paper says it

1-3 Particularly, single-crystal forms of materials, with the absence of grain boundaryrelated defects, provide an ideal platform for probing intrinsic electrical properties closely tied to their crystallographic structurers. 4-6 Additional advantages of transport studies on single crystals include the ability to investigate electronic anisotropy, 7-9 establish benchmark performance metrics, 10-12 and facilitate direct comparison with theoretical models.

00173#pg3>, establish benchmark performance metrics, and facilitate direct comparison with theoretical models <ref:2606. p. 2
Where the paper says it

1-3 Particularly, single-crystal forms of materials, with the absence of grain boundaryrelated defects, provide an ideal platform for probing intrinsic electrical properties closely tied to their crystallographic structurers. 4-6 Additional advantages of transport studies on single crystals include the ability to investigate electronic anisotropy, 7-9 establish benchmark performance metrics, 10-12 and facilitate direct comparison with theoretical models.

p. 2
Where the paper says it

1-3 Particularly, single-crystal forms of materials, with the absence of grain boundaryrelated defects, provide an ideal platform for probing intrinsic electrical properties closely tied to their crystallographic structurers. 4-6 Additional advantages of transport studies on single crystals include the ability to investigate electronic anisotropy, 7-9 establish benchmark performance metrics, 10-12 and facilitate direct comparison with theoretical models.

00173#pg3> Figure 1a shows several examples of recently developed single-crystal materials that have attracted significant research interest, including the flat-band lattice metal Pd5AlI2 <ref:2606. p. 2
Where the paper says it

4-6 Additional advantages of transport studies on single crystals include the ability to investigate electronic anisotropy, 7-9 establish benchmark performance metrics, 10-12 and facilitate direct comparison with theoretical models. 13-15 Figure 1a shows several examples of recently developed single-crystal materials that have attracted significant research interest, including the flat-band lattice metal Pd5AlI2, 16 the heavy-fermion metal CeSiI,17,18 the Kagome metal CsV3Sb5, 19-21 the photoactive semiconductor BaZrS3, 22,23 the phase-change chalcogenide BaTiS3, 6,24,25 and the Dirac/Weyl semimetals such as ZrTe5, 26-28 TaAs,29-31 and Cd3As2.

p. 2
Where the paper says it

4-6 Additional advantages of transport studies on single crystals include the ability to investigate electronic anisotropy, 7-9 establish benchmark performance metrics, 10-12 and facilitate direct comparison with theoretical models. 13-15 Figure 1a shows several examples of recently developed single-crystal materials that have attracted significant research interest, including the flat-band lattice metal Pd5AlI2, 16 the heavy-fermion metal CeSiI,17,18 the Kagome metal CsV3Sb5, 19-21 the photoactive semiconductor BaZrS3, 22,23 the phase-change chalcogenide BaTiS3, 6,24,25 and the Dirac/Weyl semimetals such as ZrTe5, 26-28 TaAs,29-31 and Cd3As2.

00173#pg4>, the heavy-fermion metal CeSiI <ref:2606. p. 2
Where the paper says it

4-6 Additional advantages of transport studies on single crystals include the ability to investigate electronic anisotropy, 7-9 establish benchmark performance metrics, 10-12 and facilitate direct comparison with theoretical models. 13-15 Figure 1a shows several examples of recently developed single-crystal materials that have attracted significant research interest, including the flat-band lattice metal Pd5AlI2, 16 the heavy-fermion metal CeSiI,17,18 the Kagome metal CsV3Sb5, 19-21 the photoactive semiconductor BaZrS3, 22,23 the phase-change chalcogenide BaTiS3, 6,24,25 and the Dirac/Weyl semimetals such as ZrTe5, 26-28 TaAs,29-31 and Cd3As2.

p. 2
Where the paper says it

4-6 Additional advantages of transport studies on single crystals include the ability to investigate electronic anisotropy, 7-9 establish benchmark performance metrics, 10-12 and facilitate direct comparison with theoretical models. 13-15 Figure 1a shows several examples of recently developed single-crystal materials that have attracted significant research interest, including the flat-band lattice metal Pd5AlI2, 16 the heavy-fermion metal CeSiI,17,18 the Kagome metal CsV3Sb5, 19-21 the photoactive semiconductor BaZrS3, 22,23 the phase-change chalcogenide BaTiS3, 6,24,25 and the Dirac/Weyl semimetals such as ZrTe5, 26-28 TaAs,29-31 and Cd3As2.

00173#pg5>, the Kagome metal CsV3Sb5 <ref:2606. p. 2
Where the paper says it

4-6 Additional advantages of transport studies on single crystals include the ability to investigate electronic anisotropy, 7-9 establish benchmark performance metrics, 10-12 and facilitate direct comparison with theoretical models. 13-15 Figure 1a shows several examples of recently developed single-crystal materials that have attracted significant research interest, including the flat-band lattice metal Pd5AlI2, 16 the heavy-fermion metal CeSiI,17,18 the Kagome metal CsV3Sb5, 19-21 the photoactive semiconductor BaZrS3, 22,23 the phase-change chalcogenide BaTiS3, 6,24,25 and the Dirac/Weyl semimetals such as ZrTe5, 26-28 TaAs,29-31 and Cd3As2.

p. 2
Where the paper says it

4-6 Additional advantages of transport studies on single crystals include the ability to investigate electronic anisotropy, 7-9 establish benchmark performance metrics, 10-12 and facilitate direct comparison with theoretical models. 13-15 Figure 1a shows several examples of recently developed single-crystal materials that have attracted significant research interest, including the flat-band lattice metal Pd5AlI2, 16 the heavy-fermion metal CeSiI,17,18 the Kagome metal CsV3Sb5, 19-21 the photoactive semiconductor BaZrS3, 22,23 the phase-change chalcogenide BaTiS3, 6,24,25 and the Dirac/Weyl semimetals such as ZrTe5, 26-28 TaAs,29-31 and Cd3As2.

00173#pg6>, the photoactive semiconductor BaZrS3 <ref:2606. p. 2
Where the paper says it

4-6 Additional advantages of transport studies on single crystals include the ability to investigate electronic anisotropy, 7-9 establish benchmark performance metrics, 10-12 and facilitate direct comparison with theoretical models. 13-15 Figure 1a shows several examples of recently developed single-crystal materials that have attracted significant research interest, including the flat-band lattice metal Pd5AlI2, 16 the heavy-fermion metal CeSiI,17,18 the Kagome metal CsV3Sb5, 19-21 the photoactive semiconductor BaZrS3, 22,23 the phase-change chalcogenide BaTiS3, 6,24,25 and the Dirac/Weyl semimetals such as ZrTe5, 26-28 TaAs,29-31 and Cd3As2.

p. 2
Where the paper says it

4-6 Additional advantages of transport studies on single crystals include the ability to investigate electronic anisotropy, 7-9 establish benchmark performance metrics, 10-12 and facilitate direct comparison with theoretical models. 13-15 Figure 1a shows several examples of recently developed single-crystal materials that have attracted significant research interest, including the flat-band lattice metal Pd5AlI2, 16 the heavy-fermion metal CeSiI,17,18 the Kagome metal CsV3Sb5, 19-21 the photoactive semiconductor BaZrS3, 22,23 the phase-change chalcogenide BaTiS3, 6,24,25 and the Dirac/Weyl semimetals such as ZrTe5, 26-28 TaAs,29-31 and Cd3As2.

00173#pg6>, the phase-change chalcogenide BaTiS3 and the Dirac/Weyl semimetals such as ZrTe5 <ref:2606. p. 2
Where the paper says it

4-6 Additional advantages of transport studies on single crystals include the ability to investigate electronic anisotropy, 7-9 establish benchmark performance metrics, 10-12 and facilitate direct comparison with theoretical models. 13-15 Figure 1a shows several examples of recently developed single-crystal materials that have attracted significant research interest, including the flat-band lattice metal Pd5AlI2, 16 the heavy-fermion metal CeSiI,17,18 the Kagome metal CsV3Sb5, 19-21 the photoactive semiconductor BaZrS3, 22,23 the phase-change chalcogenide BaTiS3, 6,24,25 and the Dirac/Weyl semimetals such as ZrTe5, 26-28 TaAs,29-31 and Cd3As2.

p. 2
Where the paper says it

4-6 Additional advantages of transport studies on single crystals include the ability to investigate electronic anisotropy, 7-9 establish benchmark performance metrics, 10-12 and facilitate direct comparison with theoretical models. 13-15 Figure 1a shows several examples of recently developed single-crystal materials that have attracted significant research interest, including the flat-band lattice metal Pd5AlI2, 16 the heavy-fermion metal CeSiI,17,18 the Kagome metal CsV3Sb5, 19-21 the photoactive semiconductor BaZrS3, 22,23 the phase-change chalcogenide BaTiS3, 6,24,25 and the Dirac/Weyl semimetals such as ZrTe5, 26-28 TaAs,29-31 and Cd3As2.

00173#pg9>, TaAs <ref:2606. p. 2
Where the paper says it

4-6 Additional advantages of transport studies on single crystals include the ability to investigate electronic anisotropy, 7-9 establish benchmark performance metrics, 10-12 and facilitate direct comparison with theoretical models. 13-15 Figure 1a shows several examples of recently developed single-crystal materials that have attracted significant research interest, including the flat-band lattice metal Pd5AlI2, 16 the heavy-fermion metal CeSiI,17,18 the Kagome metal CsV3Sb5, 19-21 the photoactive semiconductor BaZrS3, 22,23 the phase-change chalcogenide BaTiS3, 6,24,25 and the Dirac/Weyl semimetals such as ZrTe5, 26-28 TaAs,29-31 and Cd3As2.

p. 2
Where the paper says it

4-6 Additional advantages of transport studies on single crystals include the ability to investigate electronic anisotropy, 7-9 establish benchmark performance metrics, 10-12 and facilitate direct comparison with theoretical models. 13-15 Figure 1a shows several examples of recently developed single-crystal materials that have attracted significant research interest, including the flat-band lattice metal Pd5AlI2, 16 the heavy-fermion metal CeSiI,17,18 the Kagome metal CsV3Sb5, 19-21 the photoactive semiconductor BaZrS3, 22,23 the phase-change chalcogenide BaTiS3, 6,24,25 and the Dirac/Weyl semimetals such as ZrTe5, 26-28 TaAs,29-31 and Cd3As2.

00173#pg10> and Cd3As2 Notably, these single crystals, typically synthesized through laboratory-scale techniques such as chemical vapor transport (CVT) or molten-flux growth methods, often exhibit irregular shapes and limited lateral dimensions ranging from a few hundred micrometers to several millimeters <ref:2606. p. 2
Where the paper says it

13-15 Figure 1a shows several examples of recently developed single-crystal materials that have attracted significant research interest, including the flat-band lattice metal Pd5AlI2, 16 the heavy-fermion metal CeSiI,17,18 the Kagome metal CsV3Sb5, 19-21 the photoactive semiconductor BaZrS3, 22,23 the phase-change chalcogenide BaTiS3, 6,24,25 and the Dirac/Weyl semimetals such as ZrTe5, 26-28 TaAs,29-31 and Cd3As2. 32,33 Notably, these single crystals, typically synthesized through laboratory-scale techniques such as chemical vapor transport (CVT)34,35 or molten-flux growth methods, 36,37 often exhibit irregular shapes and limited lateral dimensions ranging from a few hundred micrometers to several millimeters.

p. 2
Where the paper says it

13-15 Figure 1a shows several examples of recently developed single-crystal materials that have attracted significant research interest, including the flat-band lattice metal Pd5AlI2, 16 the heavy-fermion metal CeSiI,17,18 the Kagome metal CsV3Sb5, 19-21 the photoactive semiconductor BaZrS3, 22,23 the phase-change chalcogenide BaTiS3, 6,24,25 and the Dirac/Weyl semimetals such as ZrTe5, 26-28 TaAs,29-31 and Cd3As2. 32,33 Notably, these single crystals, typically synthesized through laboratory-scale techniques such as chemical vapor transport (CVT)34,35 or molten-flux growth methods, 36,37 often exhibit irregular shapes and limited lateral dimensions ranging from a few hundred micrometers to several millimeters.

00173#pg6> On the other hand, specific multi-terminal contact geometries are often essential for transport measurements under various external perturbations such as temperature, gate voltage, and magnetic field Figure 1b and 1c depict several archetypal transport experiments alongside the commonly adopted contact geometries of devices

--- Page 3 ---

3 Introduction Electrical transport measurements, enabled by successful establishment of high-quality electrical contacts, represent one of the most extensively employed experimental techniques for discovering novel physical phenomena and demonstrating unique electronic functionalities in emerging materials <ref:2606.00173#pg2> Particularly, single-crystal forms of materials, with the absence of grain boundaryrelated defects, provide an ideal platform for probing intrinsic electrical properties closely tied to their crystallographic structurers <ref:2606.00173#pg2> Additional advantages of transport studies on single crystals include the ability to investigate electronic anisotropy <ref:2606.00173#pg3>, establish benchmark performance metrics, and facilitate direct comparison with theoretical models <ref:2606.00173#pg3> Figure 1a shows several examples of recently developed single-crystal materials that have attracted significant research interest, including the flat-band lattice metal Pd5AlI2 <ref:2606.00173#pg4>, the heavy-fermion metal CeSiI <ref:2606.00173#pg5>, the Kagome metal CsV3Sb5 <ref:2606.00173#pg6>, the photoactive semiconductor BaZrS3 <ref:2606.00173#pg6>, the phase-change chalcogenide BaTiS3 and the Dirac/Weyl semimetals such as ZrTe5 <ref:2606.00173#pg9>, TaAs <ref:2606.00173#pg10> and Cd3As2 Notably, these single crystals, typically synthesized through laboratory-scale techniques such as chemical vapor transport (CVT) or molten-flux growth methods, often exhibit irregular shapes and limited lateral dimensions ranging from a few hundred micrometers to several millimeters <ref:2606.00173#pg6> On the other hand, specific multi-terminal contact geometries are often essential for transport measurements under various external perturbations such as temperature, gate voltage, and magnetic field

--- Page 4 ---

4 Figure 1 Emerging crystals and transport measurements. (a) Optical images of representative emerging single crystals. p. 3

Where the paper says it

45-47 Linear Figure 1 Emerging crystals and transport measurements. (a) Optical images of representative emerging single crystals.

Pd5AlI2, Ref. p. 3
Where the paper says it

(a) Optical images of representative emerging single crystals. Pd5AlI2, Ref.

[16] Copyright 2025, Springer Nature. p. 3
Where the paper says it

Pd5AlI2, Ref. [16] Copyright 2025, Springer Nature.

CeSiI, Ref. p. 3
Where the paper says it

[16] Copyright 2025, Springer Nature. CeSiI, Ref.

[18] Copyright 2024, Springer Nature. p. 3
Where the paper says it

CeSiI, Ref. [18] Copyright 2024, Springer Nature.

CsV3Sb5, Ref. p. 3
Where the paper says it

[18] Copyright 2024, Springer Nature. CsV3Sb5, Ref.

[21] Copyright 2022, Springer Nature. p. 3
Where the paper says it

CsV3Sb5, Ref. [21] Copyright 2022, Springer Nature.

ZrTe5, Ref. p. 3
Where the paper says it

[21] Copyright 2022, Springer Nature. ZrTe5, Ref.

[31] Copyright 2017, Elsevier. p. 3
Where the paper says it

ZrTe5, Ref. [28] Copyright 2017, Elsevier.

BaZrS3, Ref. p. 3
Where the paper says it

[28] Copyright 2017, Elsevier. BaZrS3, Ref.

[22] Copyright 2019, Springer Nature. p. 3
Where the paper says it

BaZrS3, Ref. [22] Copyright 2019, Springer Nature.

BaTiS3, Ref. p. 3
Where the paper says it

[22] Copyright 2019, Springer Nature. BaTiS3, Ref.

[25] Copyright 2024, Springer Nature. p. 3
Where the paper says it

CeSiI, Ref. [18] Copyright 2024, Springer Nature.

TaAs, Ref. [31] Copyright 2015, Springer Nature. p. 3
Where the paper says it

[25] Copyright 2024, Springer Nature. [31] Copyright 2015, Springer Nature.

Cd3As2, Ref. p. 3
Where the paper says it

[31] Copyright 2015, Springer Nature. Cd3As2, Ref.

[33] Copyright 2014, Springer Nature. p. 3
Where the paper says it

Cd3As2, Ref. [33] Copyright 2014, Springer Nature.

(b) Typical electrical transport measurements of various emerging crystals under various external perturbations such as temperature, gate voltage, and magnetic field (c) Schematic illustration of representative device contact geometries adopted for various transport measurements

--- Page 5 ---

5 four-probe geometries are preferred for temperature-dependent resistivity measurements, particularly in studies of superconductivity and phase transitions; when configured in pairs, they can also provide insight into in-plane electronic anisotropy Additionally, the transmission line method (TLM) configuration serves to quantitatively assess contact resistance and can be adapted to accommodate multiple two-terminal devices with varying channel lengths For accurate magnetotransport measurements, geometries such as van der Pauw and Hall bars are still crucial In contrast to wafer-scale substrates or thin films, the fabrication of such versatile multiterminal electrodes with precisely defined contact geometries on laboratory-grown single crystals is often nontrivial Traditionally, researchers have relied on manually placing thin metal wires onto as-grown single crystals under an optical microscope and securing them with conductive adhesives <ref:2606.00173#pg6> This method requires crystals of at least millimeter-scale dimensions and demands extensive user skills to manually position metal wires without electrically shorting each other <ref:2606. p. 4

Where the paper says it

3,62 While this technique has played a pivotal role in the discovery of superconductivity and phase transitions in various quantum materials since the 1970s, 63-65 it presents significant limitations. For instance, the method requires crystals of at least millimeter-scale dimensions and demands extensive user skills to manually position metal wires without electrically shorting each other, thereby excluding many interesting but size-limited crystals from systematic transport investigations.

00173#pg6>

--- Page 6 ---

6 Recent developments in single-crystal device microfabrication, particularly those enabled lithography-based patterning and etching processes, have significantly advanced electrical transport studies of emerging single crystals <ref:2606.00173#pg6> In this review we present a comprehensive overview of recent technological progress in fabricating high-quality, multi-terminal electrical contacts on emerging exfoliable and nonexfoliable single-crystal materials for transport measurements <ref:2606. p. 5

Where the paper says it

6 Recent developments in single-crystal device microfabrication, particularly those enabled lithography-based patterning and etching processes, have significantly advanced electrical transport studies of emerging single crystals. 6,30,66,67 In this review, we present a comprehensive overview of recent technological progress in fabricating high-quality, multi-terminal electrical contacts on emerging exfoliable and non-exfoliable single-crystal materials for transport measurements, with a focus on methodologies for crystal planarization and metallization.

00173#pg6> We begin by introducing three key planarization approaches that enable the realization of in-plane multi-terminal electrodes through lithographic processes: (1) mechanical exfoliation of layered crystals to obtain thin flakes, (2) thin lamella lift-out using the focused ion beam (FIB) technique, and (3) bulk crystal planarization via polymeric embedding <ref:2606. p. 5
Where the paper says it

6,30,66,67 In this review, we present a comprehensive overview of recent technological progress in fabricating high-quality, multi-terminal electrical contacts on emerging exfoliable and non-exfoliable single-crystal materials for transport measurements, with a focus on methodologies for crystal planarization and metallization. We begin by introducing three key planarization approaches that enable the realization of in-plane multi-terminal electrodes through lithographic processes: (1) mechanical exfoliation of layered crystals to obtain thin flakes, (2) thin lamella lift-out using the focused ion beam (FIB) technique, and (3) bulk crystal planarization via polymeric embedding.

00173#pg6>

--- Page 7 ---

7 Layered, or exfoliable, crystals represent a major class of materials that have attracted substantial interest in recent transport studies due to their intrinsic two-dimensional (2D) nature <ref:2606.00173#pg9> The recent emergence of heterogeneous integration and twist assembly techniques has further broadened the scope for tuning intriguing properties engineering novel functionalities in these materials Efforts to exfoliate and transfer layered transition metal dichalcogenides (TMDs) predate the successful isolation of monolayer graph… p. 6

Where the paper says it

68-71 The recent emergence of heterogeneous integration and twist assembly techniques has further broadened the scope for tuning intriguing properties engineering novel functionalities in these materials. 59,72-74 Notably, efforts to exfoliate and transfer layered transition metal dichalcogenides (TMDs) predate the successful isolation of monolayer graphene in 2004 via the widely known “Scotch tape method”.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Improved contact fabrication for non-exfoliable crystals can be achieved by using FIB milling to define multi-terminal transport devices, which enables the fabrication of multi-terminal transport devices from sub-millimeter, non-exfoliable crystals. This allows for the accurate extraction of key electronic parameters such as resistivity, carrier concentration, and mobility on materials that cannot be easily cleaved.

  2. AI systems can be trained to select appropriate contact fabrication strategies based on material characteristics. The system can use criteria such as exfoliability, available sample dimensions, and propensity to degradation to recommend whether a material should undergo mechanical exfoliation or FIB thinning for transport measurements.

  3. The system can utilize knowledge of dielectric encapsulation strategies for air-sensitive crystals. It can recommend dielectric encapsulation layers like h-BN or polyimide based on the crystal's sensitivity to ambient conditions and the required measurement environment, ensuring reliable and reproducible transport measurements.

  4. AI systems can optimize metal deposition processes by predicting contact quality improvements. The system can suggest using techniques like ultra-high vacuum metal deposition or transfer of prepatterned metal electrodes to minimize contact resistance, as these methods have been shown to reduce resistance significantly compared to conventional deposition.

  5. The system can guide the use of micro-patterned shadow masks for contact fabrication on air-sensitive materials. It can recommend this strategy when photolithography and electron beam lithography expose crystals to potentially detrimental processing conditions, as it eliminates the need for thermal processing or polymer residues during contact definition.

Abstract

Transport measurements that probe electrical resistivity of a material under varying external stimuli, such as temperature, magnetic field, optical illumination, and gate voltage, are among the most important experimental techniques in condensed matter physics. These measurements provide critical insights into the fundamental electronic properties of materials. In recent years, they have facilitated the discovery and exploration of intriguing physical phenomena (e.g., superconductivity and quantum oscillations) and unique device functionalities (e.g., photoresponse and electrostatic gating effects) in various emerging materials, particularly in the form of single crystals. However, unlike large-scale wafers or thin films, newly synthesized single crystals often pose substantial challenges in establishing reliable electrical contacts due to their irregular geometries, limited dimensions, inherent structural characteristics, and potential susceptibility to degradation. In this review, we highlight recent technological advancements in the fabrication of high-quality, lithographically defined multi-terminal electrodes on both exfoliable and non-exfoliable single crystals for transport measurements. Our work provides a practical guide for researchers seeking to select appropriate contact-fabrication strategies tailored to unique characteristics of emerging crystals.

Related papers