Structure and energetics of grain boundaries in self-assembled double-gyroid block copolymer networks
Listen
Radio episode about this paper
Transcript
Introduction to the show: ident: Condensed Matter. The day in condensed matter: materials, phases and the measurements under them.
Kai: We're looking at the paper: "Structure and energetics of grain boundaries in self-assembled double-gyroid block copolymer networks".
Mira: Here's the gist of the paper. Grain boundaries (GBs) are ubiquitous defects in crystalline materials, but they remain less explored in block copolymer ordered phases The GB energy landscape is obtained as a function of GB orientation, which reveals multiple local minima representing distinct network-switching GBs Remarkably, the global minimum is a previously unidentified asymmetric-tilt network-switching GB (ATNS), exhibiting a lower energy than the experimentally observed (422) twin boundary (TB).
Kai: Comparative analyses of representative low-(ATNS, (422) TB) and high-energy twist ((0¯1¯1), (100) TNSs) GBs reveal that, unlike enthalpy-dominated hard matter, GB stability in DG networks is predominantly entropy-driven.
Mira: Theoretical Framework The computational framework involves a selfconsistent field theory (SCFT) model for the spontaneous formation of a GB when two grains of the same phase with different orientations come into contact.
Kai: The SCFT calculations are performed in a rectangular box where two grains, each with a predefined orientation, are positioned in opposing half-spaces to allow for the full relaxation of the GB.
Paper summary: Kai: So to wrap this up on "Structure and energetics of grain boundaries in self-assembled double-gyroid block copolymer networks," they’ve shown that the energy landscape has multiple switching states, but the global minimum is an asymmetric-tilt network-switching grain boundary, or ATNS.
Mira: The key finding is that stability in these double gyroid networks is driven by entropy penalties associated with node formation and coplanarity, which contrasts with enthalpy-dominated behavior seen in hard matter.
Lev: It seems like the authors are pointing toward a specific way to engineer defects by minimizing those entropic costs, which is crucial for understanding how these networks behave under real operating conditions.
Kai: They provide a theoretical framework and some guiding principles for designing defects in these complex soft-matter networks based on minimizing entropy penalties rather than just strict lattice matching.
Mira: It gives us a deeper understanding of the structural defects in these BCP systems, which is important because these materials are used in things like photonic crystals and ion transport media.
Lev: For us, it means when we look at designing real hardware with these network features, we need to focus on avoiding new-node formation and maintaining nodal coplanarity to get the most stable structures possible.
Conclusion: Kai: So we're wrapping up on "Structure and energetics of grain boundaries in self-assembled double-gyroid block copolymer networks." The core thing here is that they looked at how these network switching defects work and found a specific low-energy structure called the ATNS.
Mira: Exactly. They’re showing that for these double gyroid systems, the stability isn't just about how well the lattice matches perfectly, but more about entropy—specifically avoiding things like new nodes and keeping things coplanar.
Lev: From an error correction standpoint, that sounds promising if we can model those entropic penalties accurately. It tells us what kind of local geometry actually has the lowest energy penalty when you’re trying to form a boundary in this material.
Kai: I mean, they identified this ATNS structure as the global minimum compared to the twin boundary they saw experimentally. That’s a big piece of data because it points toward a different physical mechanism than we usually see in hard matter.
Mira: It really does. They highlight that for block copolymer networks, entropy penalties are the main thing governing stability, whereas in hard materials, you're usually looking at enthalpy—the energy cost of stretching or breaking bonds.
Lev: If the authors can nail that entropic contribution calculation—especially how it relates to chain conformation frustration—then we might be able to predict defect formation in actual device architectures with higher fidelity than just trial and error.
Kai: So, basically, the implication is that when designing these soft materials, focusing on avoiding those entropic penalties is a better guide for engineering stable structures than trying to force a perfect lattice match.
Mira: Right. It gives us concrete physical principles to use when we’re trying to control the morphology of these complex self-assembled systems.
Lev: And that moves us toward developing predictive models for how defects propagate through these networks in real hardware scenarios.
Jing Chen, Aiping Zhu, Dan Wei, An-Chang Shi, Kai Jiang
Hunan Key Laboratory for Computation and Simulation in Science and Engineering · Key Laboratory of Intelligent Computing and Information Processing of Ministry of Education Department of Physics and Astronomy at McMaster University
cond-mat.soft
Submitted: 2026-05-26
Updated: 2026-10-28
Code: https://github.com/wanglizhi02/Self-Consistent-Field-Theory-MPI
License: http://creativecommons.org/licenses/by/4.0/
Importance score: 83/100
The gist: Grain boundaries (GBs) are ubiquitous defects in crystalline materials, but they remain less explored in block copolymer ordered phases The GB energy landscape is obtained as a function of GB…
Key concepts
- Grain Boundaries (GBs)
- These are defects or interfaces where two regions of a crystalline material meet, such as different orientations of grains. In block copolymer networks, they are crucial because their structure and energy dictate the overall stability and defect behavior of the material.
- Self-Consistent Field Theory (SCFT)
- This is a computational method used to model how polymer chains behave in a complex system. It allows researchers to calculate the free energy of forming a grain boundary by considering the interactions between all the polymer segments in the network.
- Entropy-Driven Stability
- In typical materials, stability is driven by minimizing energy (enthalpy). However, for block copolymer networks, stability is mainly driven by entropy. This means low-energy boundaries are those that minimize unfavorable chain conformations and packing frustrations rather than just matching a perfect geometric lattice.
- Asymmetric-Tilt Network-Switching GB (ATNS)
- This is the lowest energy grain boundary found in the study. It represents a specific way two grains can switch their orientation while minimizing chain packing frustration. Its lower energy compared to other boundaries suggests it is the most thermodynamically stable defect type in these networks.
Terminology
Summary
Grain boundaries (GBs) are ubiquitous defects in crystalline materials, but they remain less explored in block copolymer ordered phases The GB energy landscape is obtained as a function of GB orientation, which reveals multiple local minima representing distinct network-switching GBs Remarkably, the global minimum is a previously unidentified asymmetric-tilt network-switching GB (ATNS), exhibiting a lower energy than the experimentally observed (422) twin boundary (TB). p. 1 The GB energy landscape is obtained as a
function of GB orientation, which reveals multiple local minima representing distinct
network-switching GBs. Remarkably, the global minimum is a previously unidentified
asymmetric-tilt network-switching GB (ATNS), exhibiting a lower energy than the experimentally observed (422) twin boundary (TB). The GB energy landscape is obtained as a
function of GB orientation, which reveals multiple local minima representing distinct
network-switching GBs. Remarkably, the global minimum is a previously unidentified
asymmetric-tilt network-switching GB (ATNS), exhibiting a lower energy than the experimentally observed (422) twin boundary (TB). The GB energy landscape is obtained as a
function of GB orientation, which reveals multiple local minima representing distinct
network-switching GBs. Remarkably, the global minimum is a previously unidentified
asymmetric-tilt network-switching GB (ATNS), exhibiting a lower energy than the experimentally observed (422) twin boundary (TB). Remarkably, the global minimum is a previously unidentified
asymmetric-tilt network-switching GB (ATNS), exhibiting a lower energy than the experimentally observed (422) twin boundary (TB). Comparative analyses of representative low- (ATNS, (422) TB) and high-energy twist ((0¯1¯1), (100) TNSs) GBs reveal that,
unlike enthalpy-dominated hard matter, GB stability in DG networks is predominantly
entropy-driven. Remarkably, the global minimum is a previously unidentified
asymmetric-tilt network-switching GB (ATNS), exhibiting a lower energy than the experimentally observed (422) twin boundary (TB). Comparative analyses of representative low- (ATNS, (422) TB) and high-energy twist ((0¯1¯1), (100) TNSs) GBs reveal that,
unlike enthalpy-dominated hard matter, GB stability in DG networks is predominantly
entropy-driven. Remarkably, the global minimum is a previously unidentified
asymmetric-tilt network-switching GB (ATNS), exhibiting a lower energy than the experimentally observed (422) twin boundary (TB). Comparative analyses of representative low- (ATNS, (422) TB) and high-energy twist ((0¯1¯1), (100) TNSs) GBs reveal that,
unlike enthalpy-dominated hard matter, GB stability in DG networks is predominantly
entropy-driven.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Theoretical Framework
The computational framework involves a selfconsistent field theory (SCFT) model for the spontaneous formation of a GB when two grains of the same phase with different orientations come into contact. The SCFT calculations are performed in a rectangular box where two grains, each with a predefined orientation, are positioned in opposing half-spaces to allow for the full relaxation of the GB. p. 4 The two grains, each with a predefined orientation, are positioned
in the two opposing half-spaces, grain 1 at x ≤ −Lx/2 and grain 2 at x ≥ Lx/2. The
intermediate region −Lx/2 < x < Lx/2 is made sufficiently large to allow for the full
relaxation of the GB.Where the paper says it
SCFT Model for GBs
The SCFT model considers an incompressible melt of n flexible AB diblock copolymers in the rectangular box. The degree of polymerization of the A-block is denoted by NA = fN, where f represents the volume fraction of the A-block, and NB = (1 − f)N. p. 5 Each polymer chain consists of two conformationally symmetric A- and B-blocks. The
degree of polymerization of the A-block is denoted by NA = fN, where f represents the
volume fraction of the A-block, and N is the total degree of polymerization of the chain. (4)
The free energy per chain in unity of kBT is obtained by 44,54
FGB
nkBT
=
1
V
Z
V
{χNϕA, GB(r)ϕB, GB(r) −
X
α∈{A, B}
wα(r)ϕα, GB(r)
+ η(r)[1 −
X
α∈{A, B}
ϕα, GB(r)]} dr − ln Q,
(5)
where T is the temperature, kB is the Boltzmann constant, χ is the Flory-Huggins interaction
parameter, and η(r) is the “pressure” field that ensures the incompressibility of the system. The free energy per chain FGB/nkBT can be divided into two parts, the segment-segment
7Where the paper says it
Where the paper says it
Results and Discussion
The resulting energy landscape exhibits a complex and corrugated surface with multiple local minima, suggesting that the network switching is more favorable to the GB stability within the DG phase. The global minimum (I, γ = 0. p. 1 The GB energy landscape is obtained as a
function of GB orientation, which reveals multiple local minima representing distinct
network-switching GBs. Remarkably, the global minimum is a previously unidentified
asymmetric-tilt network-switching GB (ATNS), exhibiting a lower energy than the experimentally observed (422) twin boundary (TB). The GB energy landscape is obtained as a
function of GB orientation, which reveals multiple local minima representing distinct
network-switching GBs. Remarkably, the global minimum is a previously unidentified
asymmetric-tilt network-switching GB (ATNS), exhibiting a lower energy than the experimentally observed (422) twin boundary (TB). To elucidate the underlying mechanism, we investigate a
representative set of GBs, including the low-energy ATNS and (422) TB, together with two
higher-energy twist GBs ((0¯1¯1) and (100) TNSs) for comparison. Analyses of entropy and
interaction energies, chain conformations, network topologies, and geometric deformations
demonstrate that, GB stability in BCP network phases is primarily governed by entropy
penalties associated with node formation and coplanarity, in stark contrast to the enthalpydominated behavior typically found in hard materials.Where the paper says it
Where the paper says it
Where the paper says it
Chain Trajectories
The dominance of entropy in determining GB stability motivates a microscopic analysis of chain conformations and network geometry near the interface. The deviation angle θ between the normalized polar order parameter Pˆ(r) and the unit normal vector of the IMDS nˆ(r) characterizes chain conformational frustration. p. 1 Twist-type GBs generate new nodes and disrupt nodal coplanarity,
causing chain packing frustration and large entropy penalties. Conversely, the ATNS
preserves favorable network connectivity and minimizes conformational constraints on
polymer chains, making it the energetically preferred GB. Comparative analyses of representative low- (ATNS, (422) TB) and high-energy twist ((0¯1¯1), (100) TNSs) GBs reveal that,
unlike enthalpy-dominated hard matter, GB stability in DG networks is predominantly
entropy-driven. Twist-type GBs generate new nodes and disrupt nodal coplanarity,
causing chain packing frustration and large entropy penalties.Where the paper says it
Where the paper says it
GB Network Topologies
The ATNS exhibits the highest thermodynamic stability among the four investigated DG network-switching GBs. Due to the 180◦ rotational symmetry of the two grains about the [¯1¯11] axis, it is sufficient to analyze one network branch. p. 2 16–21 Among these, grain boundaries
(GBs) are the ubiquitous two-dimensional defects, which are interfaces separating grains of
the same phase with different orientations. Their presence disrupts the structural symmetry,
and can strongly influence the macroscopic properties of materials. Comparative analyses of representative low- (ATNS, (422) TB) and high-energy twist ((0¯1¯1), (100) TNSs) GBs reveal that,
unlike enthalpy-dominated hard matter, GB stability in DG networks is predominantly
entropy-driven. Twist-type GBs generate new nodes and disrupt nodal coplanarity,
causing chain packing frustration and large entropy penalties.Where the paper says it
Where the paper says it
Conclusion
Low-energy GBs are selected by minimizing entropy penalties, notably the avoidance of new-node formation and the preservation of nodal coplanarity, rather than by strict lattice matching. This work provides a theoretical framework and guiding principles for understanding and engineering defects in complex soft-matter networks. p. 0 Structure and energetics of grain boundaries
in self-assembled double-gyroid block
copolymer networks
Jing Chen,†,‡ Aiping Zhu,†,‡ Dan Wei,∗,† An-Chang Shi,∗,¶
and Kai Jiang∗,†
†Hunan Key Laboratory for Computation and Simulation in Science and Engineering, Key
Laboratory of Intelligent Computing and Information Processing of Ministry of Education,
School of Mathematics and Computational Science, Xiangtan University, Xiangtan, Hunan,
China, 411105
‡These authors contributed equally to this work. ¶Department of Physics and Astronomy, McMaster University, Hamilton, Ontario,
L8S4M1, Canada
E-mail: danwei@xtu. Structure and energetics of grain boundaries
in self-assembled double-gyroid block
copolymer networks
Jing Chen,†,‡ Aiping Zhu,†,‡ Dan Wei,∗,† An-Chang Shi,∗,¶
and Kai Jiang∗,†
†Hunan Key Laboratory for Computation and Simulation in Science and Engineering, Key
Laboratory of Intelligent Computing and Information Processing of Ministry of Education,
School of Mathematics and Computational Science, Xiangtan University, Xiangtan, Hunan,
China, 411105
‡These authors contributed equally to this work. ¶Department of Physics and Astronomy, McMaster University, Hamilton, Ontario,
L8S4M1, Canada
E-mail: danwei@xtu.Where the paper says it
Where the paper says it
Acknowledgement
This work is supported by the National Key R&D Program of China (2023YFA1008802), the Science and Technology Innovation Program of Hunan Province (2024RC1052), the Innovative Research Group Project of Natural Science Foundation of Hunan Province of China (2024JJ1008), the Natural Sciences and Engineering Research Council of Canada, the Postgraduate Scientific Research Innovation Project of Hunan Province (CX20240589), the Postgraduate Scientific Research Innovation Project of Xiangtan University (XDCX2025Y237), and the High Performance Computing Platform of Xiangtan University
References
(1) Bates, F. S.; Fredrickson, G. H. Block copolymers—designer soft materials
(2) Hajduk, D. A.; Harper, P. E.; Gruner, S. M.; Honeker, C. C.; Kim, G.; Thomas, E. L.; Fetters, L. J., The gyroid: a new equilibrium morphology in weakly segregated diblock copolymers
(3) Roy, R.; Park, J. K.; Young, W.-S.; Mastroianni, S. E.; Tureau, M. S.; Epps III, T. p. 1 021) II (0. 025)
(III)
III (0.Where the paper says it
(4) Chang, C.-Y.; Manesi, G.-M.; Yang, C.-Y.; Hung, Y.-C.; Yang, K.-C.; Chiu, P.-T.; Avgeropoulos, A., Mesoscale networks and corresponding transitions from self-assembly of block copolymers
(5) Asai, Y.; Suzuki, J.; Aoyama, Y.; Nishioka, H.; Takano, A.; Matsushita, Y., Tricontinuous double diamond network structure from binary blends of ABC triblock terpolymers
(6) Bailey, T. S.; Hardy, C. M.; Epps, T. H.; Bates, F. S., A noncubic triply periodic network morphology in poly (isoprene-b-styrene-b-ethylene oxide) triblock copolymers
(7) Epps, T. H.; Cochran, E. W.; Hardy, C. M.; Bailey, T. S.; Waletzko, R. S.; Bates, F. S., Network phases in ABC triblock copolymers
(8) Maldovan, M.; Urbas, A.; Yufa, N.; Carter, W.; Thomas, E., Photonic properties of bicontinuous cubic microphases
(9) Urbas, A. M.; Maldovan, M.; DeRege, P.; Thomas, E. L., Bicontinuous cubic block copolymer photonic crystals
(10) Saba, M.; Thiel, M.; Turner, M. D.; Hyde, S.; Gu, M.; Grosse-Brauckmann, K.; Neshev, D. N.; Mecke, K.; Schröder-Turk, G. E., Circular dichroism in biological photonic crystals and cubic chiral nets
(11) Goto, K.; Rozhanskii, I.; Yamakawa, Y.; Otsuki, T.; Naito, Y., Development of aromatic polymer electrolyte membrane with high conductivity and durability for fuel cell
(12) Prasad, I.; Jinnai, H.; Ho, R.-M.; Thomas, E. L.; Grason, G. M., Anatomy of triplyperiodic network assemblies: characterizing skeletal and inter-domain surface geometry of block copolymer gyroids
(13) Oh, S. S.; Demetriadou, A.; Wuestner, S.; Hess, O., On the origin of chirality in nanoplasmonic gyroid metamaterials
(14) Lee, J.-H.; Koh, C. Y.; Singer, J. P.; Jeon, S.-J.; Maldovan, M.; Stein, O.; Thomas, E. L., 25th anniversary article: Ordered polymer structures for the engineering of photons and phonons
(15) Hur, K.; Francescato, Y.; Giannini, V.; Maier, S. A.; Hennig, R. G.; Wiesner, U., Three-dimensionally isotropic negative refractive index materials from block copolymer self-assembled chiral gyroid networks
(16) Li, W.; Müller, M., Defects in the self-assembly of block copolymers and their relevance for directed self-assembly
(17) Li, Z.; Hur, K.; Sai, H.; Higuchi, T.; Takahara, A.; Jinnai, H.; Gruner, S. M.; Wiesner, U., Linking experiment and theory for three-dimensional networked binary metal nanoparticle–triblock terpolymer superstructures
(18) Feng, X.; Guo, H.; Thomas, E. L., Topological defects in tubular network block copolymers
(19) Feng, X.; Burke, C. J.; Zhuo, M.; Guo, H.; Yang, K.; Reddy, A.; Prasad, I.; Ho, R.-M.; Avgeropoulos, A., Seeing mesoatomic distortions in soft-matter crystals of a double-gyroid block copolymer
(20) Miyata, T.; Wang, H.-F.; Suenaga, T.; Watanabe, D.; Marubayashi, H.; Jinnai, H., Dislocation-induced defect formation in a double-gyroid network
(21) Shan, W.; Subramanian, V.; Feng, X.; Thomas, E. L., The nature of crystallographic defects in noncrystalline tubular network block copolymers
(22) Sutton, A. P.; Balluffi, R. W., Interfaces in Crystalline Materials; Oxford University Press: Oxford, UK, 1995
(23) Gottstein, G.; Shvindlerman, L. S., Grain boundary migration in metals: thermodynamics, kinetics, applications; CRC press
(24) Murdoch, H. A.; Schuh, C. A., Estimation of grain boundary segregation enthalpy and its role in stable nanocrystalline alloy design
(25) Read, W. T.; Shockley, W., Dislocation models of crystal grain boundaries
(26) Bulatov, V. V.; Reed, B. W.; Kumar, M., Grain boundary energy function for fcc metals
(27) Tschopp, M. A.; Coleman, S. P.; McDowell, D. L., Symmetric and asymmetric tilt grain boundary structure and energy in Cu and Al (and transferability to other fcc metals)
(28) Hahn, E. N.; Fensin, S. J.; Germann, T. C.; Meyers, M. A., Symmetric tilt boundaries in body-centered cubic tantalum
(29) Li, S.; Yang, L.; Lai, C., Atomistic simulations of energies for arbitrary grain boundaries; Part I: Model and validation. p. 5 grain 1 GB grain 2
Lx
Lz
x
y z
Ly
Figure 1: Schematic of the computational setup. SCFT model for GBs
We consider an incompressible melt of n flexible AB diblock copolymers in the rectangular
box.Where the paper says it
(30) Gido, S. P.; Gunther, J.; Thomas, E. L.; Hoffman, D., Lamellar diblock copolymer grain boundary morphology. p. 9 When the value of D(x) satisfies D(x) ≤ ϵ (a prescribed threshold),
the local morphology is considered to be consistent with that of the corresponding bulk
structure, and the region is identified as an undeformed grain region. Conversely, when D(x)
exceeds this threshold, the structure deviates significantly from the bulk morphology and is
classified as a deformed region influenced by the GB or the imposed boundary conditions.Where the paper says it
(31) Gido, S. P.; Thomas, E. L., Lamellar diblock copolymer grain boundary morphology; Tilt boundaries
(32) Carvalho, B. L.; Lescanec, R. L.; Thomas, E. L., Grain boundary defects in block copolymer systems: Bulk and thin film results
--- Page 1 ---
Grain boundaries (GBs) are ubiquitous defects in crystalline materials However, they remain less explored in block copolymer ordered phases Here, we develop a selfconsistent field theory framework to investigate GB structure and energetics in doublegyroid (DG) diblock copolymer networks.
Abstract
Grain boundaries (GBs) are ubiquitous defects in crystalline materials However, they remain less explored in block copolymer ordered phases Here, we develop a selfconsistent field theory framework to investigate GB structure and energetics in doublegyroid (DG) diblock copolymer networks. The GB energy landscape is obtained as a function of GB orientation, which reveals multiple local minima representing distinct network-switching GBs. p. 1 Here, we develop a selfconsistent field theory framework to investigate GB structure and energetics in doublegyroid (DG) diblock copolymer networks. The GB energy landscape is obtained as a
function of GB orientation, which reveals multiple local minima representing distinct
network-switching GBs.Where the paper says it
Pruning redundant reasoning tokens
Grain boundaries (GBs) are ubiquitous defects in crystalline materials However, they remain less explored in block copolymer ordered phases Here, we develop a selfconsistent field theory framework to investigate GB structure and energetics in doublegyroid (DG) diblock copolymer networks.
How the training signal is built
The GB energy landscape is obtained as a function of GB orientation, which reveals multiple local minima representing distinct network-switching GBs. Remarkably, the global minimum is a previously unidentified asymmetric-tilt network-switching GB (ATNS), exhibiting a lower energy than the experimentally observed (422) twin boundary (TB). Comparative analyses of representative low-(ATNS, (422) TB) and high-energy twist ((0¯1¯1), (100) TNSs) GBs reveal that, unlike enthalpy-dominated hard matter, GB stability in DG networks is predominantly entropy-driven.
Where the gains come from
The SCFT framework captures rich GB structures spanning both tilt and twist configurations and enables the identification of novel low-energy GBs. The results reveal that, GB stability in BCP network phases is primarily governed by entropy penalties associated with node formation and coplanarity. p. 4 To elucidate the underlying mechanism, we investigate a
representative set of GBs, including the low-energy ATNS and (422) TB, together with two
higher-energy twist GBs ((0¯1¯1) and (100) TNSs) for comparison. Analyses of entropy and
interaction energies, chain conformations, network topologies, and geometric deformations
demonstrate that, GB stability in BCP network phases is primarily governed by entropy
penalties associated with node formation and coplanarity, in stark contrast to the enthalpydominated behavior typically found in hard materials. To elucidate the underlying mechanism, we investigate a
representative set of GBs, including the low-energy ATNS and (422) TB, together with two
higher-energy twist GBs ((0¯1¯1) and (100) TNSs) for comparison. Analyses of entropy and
interaction energies, chain conformations, network topologies, and geometric deformations
demonstrate that, GB stability in BCP network phases is primarily governed by entropy
penalties associated with node formation and coplanarity, in stark contrast to the enthalpydominated behavior typically found in hard materials.Where the paper says it
Where the paper says it
The SCFT framework captures rich GB structures spanning both tilt and twist configurations and enables the identification of novel low-energy GBs. The results reveal that, GB stability in BCP network phases is primarily governed by entropy penalties associated with node formation and coplanarity.
The GB energy landscape further shows that a previously unidentified asymmetric tilt network-switching GB (ATNS) emerges as the global minimum, surpassing the experimentally reported (422) TNS. The stability of GBs in BCP network phases is predominantly governed by entropy contribution. p. 4 To elucidate the underlying mechanism, we investigate a
representative set of GBs, including the low-energy ATNS and (422) TB, together with two
higher-energy twist GBs ((0¯1¯1) and (100) TNSs) for comparison. Analyses of entropy and
interaction energies, chain conformations, network topologies, and geometric deformations
demonstrate that, GB stability in BCP network phases is primarily governed by entropy
penalties associated with node formation and coplanarity, in stark contrast to the enthalpydominated behavior typically found in hard materials.Where the paper says it
The dominance of entropy in determining GB stability motivates a microscopic analysis of chain conformations and network geometry near the interface. The ATNS connects two grains via existing struts, avoiding new-node generation and largely preserving node coplanarity. p. 4 To elucidate the underlying mechanism, we investigate a
representative set of GBs, including the low-energy ATNS and (422) TB, together with two
higher-energy twist GBs ((0¯1¯1) and (100) TNSs) for comparison. Analyses of entropy and
interaction energies, chain conformations, network topologies, and geometric deformations
demonstrate that, GB stability in BCP network phases is primarily governed by entropy
penalties associated with node formation and coplanarity, in stark contrast to the enthalpydominated behavior typically found in hard materials. To elucidate the underlying mechanism, we investigate a
representative set of GBs, including the low-energy ATNS and (422) TB, together with two
higher-energy twist GBs ((0¯1¯1) and (100) TNSs) for comparison. Analyses of entropy and
interaction energies, chain conformations, network topologies, and geometric deformations
demonstrate that, GB stability in BCP network phases is primarily governed by entropy
penalties associated with node formation and coplanarity, in stark contrast to the enthalpydominated behavior typically found in hard materials.Where the paper says it
Where the paper says it
Low-energy GBs are selected by minimizing entropy penalties, notably the avoidance of new-node formation and the preservation of nodal coplanarity. p. 1 Comparative analyses of representative low- (ATNS, (422) TB) and high-energy twist ((0¯1¯1), (100) TNSs) GBs reveal that,
unlike enthalpy-dominated hard matter, GB stability in DG networks is predominantly
entropy-driven. Twist-type GBs generate new nodes and disrupt nodal coplanarity,
causing chain packing frustration and large entropy penalties.Where the paper says it
The dominance of entropy in determining GB stability motivates a microscopic analysis of chain conformations and network geometry near the interface. The ATNS connects two grains via existing struts, avoiding new-node generation and largely preserving node coplanarity. Low-energy GBs are selected by minimizing entropy penalties, notably the avoidance of new-node formation and the preservation of nodal coplanarity.
Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.
Improvements for AI systems
-
Precise determination of grain boundary stability in soft matter networks can be achieved by employing a self-consistent field theory framework that captures polymer chain conformations, entropy, and interaction energies simultaneously. This allows AI systems to accurately predict which grain boundary configurations are thermodynamically preferred based on the calculated free energy per chain FGB/nkBT.
-
The improved system can perform global optimization of grain boundary structures by searching the orientation space (theta, Psi) to map the GB energy landscape and identify previously unidentified low-energy states like the asymmetric tilt network-switching GB (ATNS). This enables prediction of non-intuitive stable defects that are not observed in hard matter systems.
-
The AI can predict microscopic chain conformational frustration by calculating deviation angles theta between the normalized polar order parameter P(r) and the unit normal vector n hat(r) near the interface. This capability allows for the quantification of entropy penalties associated with new node generation and disruption of nodal coplanarity, providing a physical basis for GB stability predictions.
-
The system can distinguish between low-energy and high-energy grain boundaries by analyzing geometric deformation statistics across strut lengths, angles, and node coplanarity. This allows AI to classify GBs based on the critical indicator that
node coplanarity consistently shows the smallest deviation in low-energy GBs (within 6%)
. -
The AI can predict the topological reconstruction mechanisms of different grain boundaries by analyzing circuit classifications such as single-circuit versus double-circuit arrangements and new node types. This enables targeted design of networks to favor stable network switching over high-energy configurations like the (011) TNS.
Abstract
Grain boundaries (GBs) are ubiquitous defects in crystalline materials, but remain less explored in block copolymer ordered phases. Here, we develop a self-consistent field theory framework to investigate GB structure and energetics in double-gyroid (DG) diblock copolymer networks. Two energy landscapes are obtained for tilt and twist GBs as functions of GB orientations revealing multiple local minima. The lowest-energy GB among the sampled GBs is an asymmetric-tilt network-switching GB ([1 bar 1 bar1] ATNS) rather than the experimentally observed (422) twin boundary (TB) among the sampled GBs. Comparative analyses of tilt ([1 bar 1 bar1], [100] ATNS) and twist ((422) TB, [0 1 bar 1 bar] TNS) GBs reveal that, unlike enthalpy-dominated hard matter, GB stability in DG networks is entropy-driven. Twist-type GBs generate new nodes and disrupt nodal coplanarity, causing chain-packing frustration and entropy penalties. Although the [100] ATNS does not generate new nodes, its disruption of nodal coplanarity still incurs large entropy penalties. Conversely, the [1 bar 1 bar1] ATNS preserves favorable network connectivity and minimizes conformational constraints, making it the energetically preferred GB.
Related papers
- Coarse-graining dense, deformable active particles
- Three-body corrections to the Brownian viscosity of hard spheres without hydrodynamic interactions
- Thin active nematohydrodynamic layers: asymptotic theories and instabilities
- Origins of suppressed self-diffusion of nanoscale constituents of a complex liquid
- Soft material mechanical property degradation at high strain rates
- Avalanche criticality emerges by thermal fluctuation in a quiescent glass