CHIMERA: Couette Hydrodynamics for the Investigation of Multi-fluid Extreme-Reynolds Turbulence in Annuli

arXiv:2605.23396 · physics.flu-dyn · Submitted 2026-05-22 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Physics. The day in general physics: instruments, methods and results across the field.

Kai: We're looking at the paper: "CHIMERA: Couette Hydrodynamics for the Investigation of Multi-fluid Extreme-Reynolds Turbulence in Annuli".

Mira: Here's the gist of the paper. CHIMERA: A wide Reynolds number range Taylor-Couette facility presents a novel apparatus designed to investigate angular momentum transport across a vast spectrum of flow regimes, from moderate gas flows to extreme cryogenic conditions in liquid helium, which is crucial for understanding classical-to-quantum transitions in turbulent transport.

Kai: Apparatus Design and Torque Measurement The CHIMERA facility features a novel torque measurement technique where the outer cylinder is suspended as a torsion pendulum, allowing direct inference of the fluid-induced torque from its angular deflection.

Mira: This approach eliminates the need for rotating torque transducers and is particularly well suited for operation in cryogenic environments.

Kai: Angular deflections are measured optically using a two-dimensional position-sensitive device, providing high sensitivity while enabling detection of spurious motions.

Paper summary: Kai: The authors are showing this facility can span more than five decades in Reynolds number, up to Re around one hundred six.

Mira: They’re measuring a dimensionless torque, defined as T over rho times the square of the radius, and they find that the scaling behavior is consistent with what we already know in classical regimes.

Lev: The paper mentions they tested this across helium, nitrogen, and C4F8 gases at room temperature and variable pressure.

Kai: Crucially, they also operated it with liquid helium between one point six Kelvin and three point six Kelvin.

Mira: That’s where the real interest is for us—they claim this setup lets them investigate how quantum effects like quantized vortices might influence that turbulent transport in superfluid helium.

Lev: The methodology involves using an optical two-dimensional position-sensitive device to measure the angular deflection of the outer cylinder.

Kai: They also have an eddy-current damping system to stabilize those oscillations really fast, which is key for getting steady state measurements.

Conclusion: Kai: So looking at "CHIMERA: Couette Hydrodynamics for the Investigation of Multi-fluid Extreme-Reynolds Turbulence in Annuli", it’s really about bridging those classical and quantum fluid dynamics using one setup.

Mira: The authors have built this specific Taylor-Couette apparatus to see how angular momentum moves across a very wide range of flow regimes.

Lev: It’s about taking the concept of angular momentum transport, which is usually studied in simpler flows, and pushing it into extreme turbulence where quantum weirdness might start showing up.

Kai: The implication is that we now have a versatile experimental framework for studying this turbulent Taylor-Couette flow across many physical regimes simultaneously.

Mira: It gives us a way to look at how classical physics transitions into the superfluid phase of helium and how things like quantized vortices affect transport.

dSBT/IRIG CEA, University Grenoble Alpes

physics.flu-dyn

Submitted: 2026-05-22

Updated: 2026-10-30

Comments: 9 pages, 5 figures

License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/

Importance score: 79/100

The gist: CHIMERA: A wide Reynolds number range Taylor-Couette facility presents a novel apparatus designed to investigate angular momentum transport across a vast spectrum of flow regimes…

Key concepts

Taylor-Couette facility
This is the physical setup where fluid flows between two concentric cylinders rotating at different speeds. The goal is to investigate how angular momentum moves through this flow, especially when the flow becomes highly turbulent across many different speed ranges.
Torque measurement technique
Instead of using rotating sensors, the outer cylinder is suspended as a torsion pendulum. Its angular deflection is measured optically using a position-sensitive device. This allows for direct calculation of the fluid's torque without needing external rotating torque devices, which is especially useful in cold environments.
Normal and superfluid phases
Helium exhibits two distinct states: the normal phase, where classical turbulence occurs, and the superfluid phase at very low temperatures (1.6 K to 3.6 K). Studying both allows researchers to investigate how quantum effects like quantized vortices influence turbulent transport in fluids.

Terminology

Summary

CHIMERA: A wide Reynolds number range Taylor-Couette facility presents a novel apparatus designed to investigate angular momentum transport across a vast spectrum of flow regimes, from moderate gas flows to extreme cryogenic conditions in liquid helium, which is crucial for understanding classical-to-quantum transitions in turbulent transport. p. 0

Apparatus Design and Torque Measurement

The CHIMERA facility features a novel torque measurement technique where the outer cylinder is suspended as a torsion pendulum, allowing direct inference of the fluid-induced torque from its angular deflection. This approach eliminates the need for rotating torque transducers and is particularly well suited for operation in cryogenic environments. p. 0 Angular deflections are measured optically using a two-dimensional position-sensitive device, providing high sensitivity while enabling detection of spurious motions. p. 0 An eddy-current damping system ensures rapid stabilization of the pendulum, allowing for steady-state measurements. p. 0 A dedicated calibration procedure based on the measurement of the natural oscillation frequency yields the torsion constant. p. 0 The apparatus is built with StainlessSteal (X2CrNi18-9) to ensure that all proportions are conserved after cool down to cryogenic temperature. p. 1

Experimental Regimes and Fluid Versatility

Measurements performed in helium, nitrogen, and C4F8 gases at room temperature and variable pressure, as well as in liquid helium between 1.6 K and 3.6 K, cover more than five decades in Reynolds number, up to Re ∼ 106. p. 0 The measured dimensionless torque is consistent with established scaling laws in the classical regime. p. 0 The ability to operate across the classical and superfluid phases of helium provides a unique platform to investigate how quantum effects such as quantized vortices and mutual friction may influence turbulent transport. p. 0 This setup offers a versatile and precise experimental framework for studying the turbulent Taylor–Couette flow across an unprecedented range of physical regimes. p. 0

Measurement System Mechanics

The torque measurement system is designed to determine the torque acting on the outer cylinder by measuring the angular deflection of this cylinder about its suspension axis. A light beam emitted by a 1 mW laser diode passes through three windows and is reflected by a mirror attached to the outer cylinder, which then impinges on a two-dimensional 10 × 10mm2 positionsensitive device (PSD). p. 3 The resulting displacement ∆x measured on the PSD is, at first order, given by ∆x = 2LPSD∆θ, where k is the torsion (spring) constant of the suspension wire. p. 3 Eight eddy-current brakes are added to fully damp these oscillations. p. 3

Results and Uncertainty Analysis

First measurements performed in various gases and in liquid helium demonstrate that the apparatus is capable of spanning more than five decades in Reynolds number, up to Re ∼ 106. The dimensionless torque Γ = T/ρν2 as a function of the Reynolds number shows consistent scaling behavior over the explored range of parameters. p. 5 Several sources of uncertainty affect the torque measurements, with their relative importance depending on the working fluid and operating conditions. p. 6 The total uncertainty on the torque measurement is estimated to be of the order of ∆T/T0 ≈ 1. p. 77% in the worst case scenario of gas Helium at room temperature and 0. p. 73 bar.

Conclusion and Future Outlook

The combination of optical angle detection using a two-dimensional position-sensitive detector and efficient eddy-current damping provides a sensitive and robust measurement of the steady-state torque. Beyond its performance as a high-resolution torque sensor, the ability to operate the same setup across the normal and superfluid phases of helium opens new perspectives for the study of turbulent transport in quantum fluids. p. 7 This facility thus constitutes a versatile experimental platform for exploring Taylor–Couette turbulence across a wide range of physical regimes, bridging classical and quantum fluid dynamics within a unified framework. p. 7

ACKNOWLEDGMENTS

We acknowledge the financial support of the CrossDisciplinary Program on Instrumentation and Detection of CEA, the French Alternative Energies and Atomic Energy Commission.

DATA AVAILABILITY STATEMENT

AIP Publishing believes that all datasets underlying the conclusions of the paper should be available to readers.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Improve fluid dynamics simulations for complex turbulent flows by incorporating quantum effects in helium environments through a framework that models quantized vortex lines and mutual friction between components. This allows AI to predict how these quantum mechanisms influence turbulent transport scaling laws across the classical-to-quantum transition.

  2. Develop a high-fidelity torque measurement model capable of inferring fluid-induced torque directly from the angular deflection of a suspended outer cylinder, eliminating reliance on rotating torque transducers and improving accuracy in cryogenic settings. This capability allows AI systems to accurately quantify global angular momentum flux regardless of microscopic dissipation mechanisms.

  3. Create an experimental data analysis pipeline that accounts for multiple sources of uncertainty, including residual pendular oscillations, optical speckle noise in liquid helium, and zero-torque reference drifts. This enables the AI system to produce torque measurements with a total uncertainty estimation as low as 1.7% in worst-case scenarios.

  4. Implement a parameter sweep tool that maps dimensionless torque Gamma = T/rho ν squared against the Reynolds number for gases (He, N2, C4F8) and liquid helium phases (He I, He II). This allows AI to identify and correlate transitions between laminar flow laws, Wendt correlations, and experimental power laws across five decades of Re.

  5. Build a predictive model for turbulent Taylor-Couette flow that uses the measured dimensionless torque scaling behavior at high Reynolds numbers to extrapolate transport properties into regimes beyond the experimentally tested range up to Re 10 6. This provides a versatile framework for studying flow regimes from moderate gas flows to extreme cryogenic turbulence.

Related papers