Probing bilayer topological order with layer-resolved transport

arXiv:2604.19955 · cond-mat.mes-hall · Submitted 2026-04-21 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Quantum Radio. Generated commentary on the latest quantum physics and condensed matter papers.

Kai: I'm Kai.

Mira: And I'm Mira, here with Lev.

Kai: We're looking at the paper: "Probing bilayer topological order with layer-resolved transport".

Mira: Here's the gist of the paper. Shot noise has been used to measure fractional charges of anyons <ref:2604.19955#pg2> The protocol applies to the fractional quantum spin Hall effect in MoTe2, topological states in multilayer graphene and bilayer GaAs, and to recently discovered fractional excitons in bilayer graphene <ref:2604.19955#pg2>.

Kai: This research proposes a method to probe the statistics of charged and neutral anyons in multi-component systems with layer-resolved or spin-resolved noise <ref:2604.19955#pg2>.

Mira: Probing Topological Order via Noise Signatures The paper introduces a protocol that utilizes layer-resolved or spin-resolved noise to distinguish the statistics of anyons, which is particularly important in multi-component systems where traditional anyonic interferometry has not been implemented <ref:2604.19955#pg2>.

Kai: The approach relies on the relation between statistics and the distribution of the anyon charge over the components <ref:2604.19955#pg2>.

Paper summary: Kai: So, this paper, "Probing bilayer topological order with layer-resolved transport," is looking at how we can use noise to figure out if these exotic states are Abelian or non-Abelian.

Mira: Exactly. The main idea here is that shot noise has been used before to measure the fractional charges of anyons in other systems, but this paper proposes a way to probe the statistics of both charged and neutral anyons in multi-component systems using layer-resolved or spin-resolved noise.

Lev: So it’s about extending that technique beyond simpler setups where traditional interferometry hasn't been implemented.

Kai: Right. They are looking at things like the fractional quantum spin Hall effect in MoTe2, topological states in multilayer graphene, and even recently discovered fractional excitons in bilayer graphene. The paper suggests this method applies to all of those areas because it relies on the relation between statistics and how the anyon charge is distributed across different components.

Mira: It’s important because we often don't know the statistics if we only look at the zero charge of neutral anyons, for instance in bilayer graphene.

Lev: And they specifically look at distinguishing between Abelian and non-Abelian states using quantum Hall effect in half-filled bilayer systems. They show that different charge distributions between layers for Abelian and non-Abelian anyons lead to distinct signatures in the shot noise.

Kai: That’s what I find interesting because it gives us a direct measurement of the statistics based on the noise itself, rather than just looking at some static property of the system.

Mira: And they also show that interlayer correlations affect how the electric field depends on space in a way that is sensitive to fractional statistics. It connects how things are correlated across layers to what kind of particles we are dealing with.

Lev: From an engineering standpoint, if this works, it means we can potentially read out which topological state we have just by measuring the noise spectrum through a narrow constriction in a Hall bar, even when you have long-range interactions and other non-universal effects present.

Kai: That’s what I mean. It moves us from just seeing the current or voltage to getting information about the underlying charge distribution in these bilayer excitations.

Mira: And they calculate scaling dimensions for tunneling operators using an O(two one) pseudorotation to make the interaction matrix easier to handle and diagonalize it <ref:2604.19955#pg1>.

Lev: They find that for charged anyons with g equals gamma c equals three eighths, the scaling dimension is determined by complex expressions involving parameters a and b. For the non-interacting case, they find that the scaling dimensions are g one zero zero and g zero one zero are both three eighths.

Paper summary: Kai: So they are using these mathematical tools to figure out how tunneling operators behave in these specific topological regimes.

Mira: Then they extend this to probing neutral anyons in graphene bilayers by considering the tunneling of neutral quasiparticles, which have a vector of one one zero. For the Pfaffian state, they suggest that excitons will dominate tunneling through a constriction near the center of the plateau.

Lev: The tunneling current and noise in that case depend only on the difference between two voltage biases applied to each layer, V one minus V two over two.

Kai: And they find a fractional value of e star would provide evidence for anyonic excitons.

Mira: They also look at the layer current operator, which they call I sub k equals e kappa gamma times the length of the region times two.

Lev: The cross-correlation noise S one two can be used as evidence of simultaneous tunneling of layer resolved charges e one and e two.

Kai: And in a specific case where the dominant tunneling process involves particles with charge one minus one and their antiparticles with minus one plus one, the Fano factors in the noise all equal e over two.

Lev: This noise measurement gives us ways to probe how charge is distributed within bilayer excitations.

Kai: So, layer-resolved current and noise are providing information about the charge distribution in bilayer excitations which then provides information about their statistics and topological order.

Mira: It seems like this paper is really laying out a framework where layer-resolved measurements give you the statistical information you need.

Lev: The analysis of scaling dimensions using the transformation to a Minkowski metric allows for computing tunneling exponents based on interaction matrix elements.

Kai: That’s how they connect the microscopic details of the interaction matrix U with these macroscopic observables like scaling dimensions and noise characteristics.

Mira: And they show that for the lowest order expansion, g one zero zero is found to be three eighths plus a term involving x over z and y squared over z squared, and g zero one zero is found to be three eighths minus that same term.

Lev: The scaling dimension for g n plus two is found to be three cosh squared b plus some terms involving x over z squared and y squared.

Kai: It’s a lot of detailed math, but it shows how the specific structure of the topological order dictates these measurable quantities like the tunneling exponents.

Paper summary: Mira: The paper also discusses how for n greater than one, the most relevant quasiparticles are plus one plus one zero. They show that the scaling dimension for g n plus two is found to be one over n plus one.

Lev: And in the lowest order expansion, g n plus two is found to be three cosh squared b plus some terms involving x over z squared and y squared.

Kai: It seems like they’ve mapped out exactly what we should expect to see in the noise when we look at these specific types of quasiparticles.

Mira: The paper also provides a formula for g one one zero, which involves a term with n plus one over n plus one, and another part involving the interaction matrix U.

Lev: And they show that for g n plus one the scaling dimension is three cosh squared b plus some terms involving x over z squared and y squared <ref:2604.19955#pg1>.

Kai: It shows that even for more complex states like g one one zero, we can still use this framework to extract information about the statistics.

Mira: So, what this means for us is that layer-resolved current and noise are powerful tools here because they link the charge distribution directly to the statistics of these topological orders.

Lev: It also implies that this method can be applied to many other systems beyond just bilayer graphene, like MoTe2 or multilayer graphene.

Kai: I think if we can build the hardware to measure these layer-resolved noise correlations accurately, we could start experimentally distinguishing between different types of topological states in real materials.

Mira: But they also flag a limitation: the analysis relies on certain assumptions about the renormalization group sense and the tunneling term being irrelevant there.

Lev: And they note that for some cases, like when n is greater than one, we focus on specific quasiparticle types like plus one plus one zero.

Kai: So, while the framework is strong, it depends a lot on which specific topological sector you are looking at and what assumptions about interactions you make.

Mira: Overall, the work of Hongquan Liu and J.I.A Li and D E Feldman is providing a protocol to probe statistics using noise signatures in multi-component systems.

Lev: It’s a solid way to extract information about the topological order by measuring transport properties at the layer level.

Kai: It’s a lot of detailed work, but it shows how we can use experimental measurements of current and noise to understand the underlying quantum states better.

Conclusion: Kai: So this paper, "Probing bilayer topological order with layer-resolved transport," is essentially about using noise measurements to figure out if a two-layer material is in an Abelian or non-Abelian state. Mira Right. They use something called layer current and cross-correlation noise to get clues about the charge distribution within those states.

Lev: I mean, they’re taking something that’s usually studied in simpler systems and trying to apply it here, where you have these more complex topological orders. Kai Exactly. It's about linking how charges are distributed across the layers to the actual statistics of the particles.

Mira: The authors show that this method lets you distinguish between different states by looking at how that noise behaves when you change things like the layer voltages or the interaction strength. Lev So it’s a way to see which topological order we're dealing with without needing some heavy interferometry setup.

Kai: It suggests this approach is useful for many other systems, not just bilayer graphene, because it relies on that fundamental link between charge distribution and statistics. Mira The main implication is that layer-resolved measurements could be a much simpler way to characterize these exotic materials compared to some of the traditional methods out there.

Lev: It’s a solid protocol for extracting information about the topological order from transport data, provided you can actually measure that noise with enough fidelity on real hardware. Kai That’s the engineering hurdle, though, getting that clean layer-resolved signal without all the noise overwhelming it.

Mira: And they're already looking at how this method applies to neutral anyons and excitons in graphene bilayers, which opens up a whole new area of research for what we can probe. Lev So it’s not just about charged particles anymore; they’re looking at the neutral stuff too.

Kai: It shows that we can use these transport signatures to learn about the charge distribution in excitations, which tells us what the underlying statistics are all along. Mira The next step is figuring out how robust this technique is when you move from theory to a real experimental setup.

Department of Physics, Brown University · Department of Physics, University of Texas at Austin

cond-mat.mes-hall

Submitted: 2026-04-21

Updated: 2026-11-17

Comments: 18 pages, 5 figures

DOI: 10.1103/fd6s-x6k3

License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/

Importance score: 91/100

The gist: Shot noise has been used to measure fractional charges of anyons <ref:2604.19955#pg2> The protocol applies to the fractional quantum spin Hall effect in MoTe2…

Key concepts

Shot Noise
Shot noise is a measurement technique used in physics to probe the statistical properties of charge transport. In this context, it helps determine the fractional charges of anyons—particles with non-integer charge—by analyzing fluctuations in current.
Layer-Resolved Transport
This involves measuring electrical currents separately for each layer within a bilayer system. By comparing these layer-specific measurements, researchers can gain detailed information about how quasiparticles tunnel and interact across the layers, revealing information about the underlying topological order.
Anyon Statistics
Anyons are exotic particles found in certain topological states where exchanging two identical particles results in a phase factor other than just $+1$ or $-1$. This paper uses noise signatures and charge distributions to determine whether these anyons follow Abelian (simple) or non-Abelian (complex) statistics.
Scaling Dimension
The scaling dimension describes how the probability of a tunneling operator changes with system size. Calculating these dimensions allows researchers to understand the fundamental nature of quasiparticles, such as charged anyons, by analyzing interaction matrix elements.

Terminology

Summary

Shot noise has been used to measure fractional charges of anyons <ref:2604. p. 019955#pg2> The protocol applies to the fractional quantum spin Hall effect in MoTe2, topological states in multilayer graphene and bilayer GaAs, and to recently discovered fractional excitons in bilayer graphene <ref:2604. p. 019955#pg2>. This research proposes a method to probe the statistics of charged and neutral anyons in multi-component systems with layer-resolved or spin-resolved noise <ref:2604. p. 019955#pg2>.

Probing Topological Order via Noise Signatures

The paper introduces a protocol that utilizes layer-resolved or spin-resolved noise to distinguish the statistics of anyons, which is particularly important in multi-component systems where traditional anyonic interferometry has not been implemented <ref:2604.19955#pg2>. The approach relies on the relation between statistics and the distribution of the anyon charge over the components <ref:2604. p. 019955#pg2>. Information about statistics can also be extracted from a simpler measurement of the layer-resolved electric current through a narrow constriction in a Hall bar even in the presence of long-range interactions and other non-universal effects <ref:2604. p. 019955#pg2>.

Distinguishing Abelian and Non-Abelian States

The study uses the quantum Hall effect in half-filled bilayer systems to illustrate how I-V curves and shot noise exhibit qualitative differences between Abelian and non-Abelian states <ref:2604.19955#pg2>. For the 331 topological order, the paper shows that different charge distributions between layers for Abelian and non-Abelian anyons lead to distinct signatures in shot noise <ref:2604. p. 019955#pg2>. Furthermore, interlayer correlations affect the spatial dependence of the electric field in a way sensitive to fractional statistics <ref:2604. p. 019955#pg2>.

Analyzing Quasiparticle Tunneling Exponents

The scaling dimension of tunneling operators is calculated using an O(2, 1) pseudorotation to simplify the interaction matrix and diagonalize it <ref:2604.19955#pg2>. The scaling dimension for charged anyons with g = gc = 3/8 is found to be determined by complex expressions involving parameters a and b <ref:2604.19955#pg2>. For the non-interacting case, the scaling dimensions are shown to be g(1,0,0) = g(0,1,0) = 3/8 <ref:2604. p. 319955#pg2>.

Probing Neutral Anyons and Excitons

The analysis extends to probing neutral anyons in graphene bilayers by considering the tunneling of neutral quasiparticles (1, 1, 0) <ref:2604.19955#pg2>. For the Pfaffian state, it is suggested that excitons will dominate tunneling through a constriction near the center of the plateau <ref:2604. p. 419955#pg2>. The tunneling current and noise in this case depend only on the difference of the layer-resolved voltages, leading to I1 = -I2 <ref:2604. p. 419955#pg2>. A fractional value of e∗ would provide evidence of anyonic excitons <ref:2604. p. 419955#pg2>.

Layer-Resolved Charge Distribution

The layer current operator is found to be I k = ekΓ 2 <ref:2604.19955#pg2>. The cross-correlation noise S12 can be used as evidence of simultaneous tunneling of layer-resolved charges e1,2 <ref:2604. p. 219955#pg2>. In the case where the dominant tunneling process involves (1, -1) particles and their (-1, 1) antiparticles, the Fano factors in the noise all equal e/2 <ref:2604. p. 219955#pg2>. The layer-resolved current and noise give ways to probe charge distribution in bilayer excitations <ref:2604. p. 419955#pg2>.

Where the Gains Come From

The paper demonstrates that layer-resolved current and noise provide information about the charge distribution in bilayer excitations, which in turn provides information about their statistics and the topological order <ref:2604.19955#pg2>. The analysis of scaling dimensions using the transformation to a Minkowski metric allows for the computation of tunneling exponents based on interaction matrix elements <ref:2604. p. 519955#pg2>. The final expressions for g(1,0,0) and g(0,1,0) are given in terms of determinants involving the interaction matrix U <ref:2604. p. 719955#pg2>.

Conclusion on Probing Mechanisms

The research concludes that layer-resolved current and noise give ways to probe charge distribution in bilayer excitations <ref:2604.19955#pg2>. This distribution provides information about their statistics and the topological order <ref:2604. p. 419955#pg2>. The findings suggest that this method can be applied to many other systems <ref:2604. p. 019955#pg2>. The work is supported by NSF under Grant DMR-2529089 <ref:2604. p. 419955#pg2>. Layer 3 is the Department of Physics, University of Texas at Austin, Austin, TX 78712, USA <ref:2604. p. 019955#pg2>. The paper was dated April 23, 2026 <ref:2604. p. 019955#pg2>. The K-matrix describing the 331 topological order is given by K = (3 1; 1 3) <ref:2604. p. 019955#pg2>. The charge vector t = (1, 1), where the two entries correspond to the two layers <ref:2604. p. 019955#pg2>. The Lagrangian is given by L = Z dx X squared i,j=1 4π (∂tϕiKij∂xϕj − ∂xϕiUij∂xϕj) <ref:2604. p. 119955#pg2>. The tunneling operator Tˆ = exp[i(phi u1 + phi d1, phi u2 + phi d2)q T] transfers a quasiparticle between the two edges <ref:2604. p. 119955#pg2>. The most relevant tunneling operators in the limit of low voltages and temperatures transfer particles of types p1 = (1, 0) and p2 = (0, 1) with the layer-resolved charges of (3e/8, -e/8) and (-e/8, 3e/8) respectively <ref:2604. p. 119955#pg2>. The scaling dimension of the tunneling operators gc = piK-1p T i = 3/8 <ref:2604. p. 119955#pg2>. The lowest-charge particles are electrically neutral <ref:2604. p. 119955#pg2>. The most relevant such particles are (1, -1) and (-1, 1) with the corresponding scaling dimension gn = 1 and the layer resolved charges ±e/2 <ref:2604. p. 119955#pg2>. The current operator is found to be ˆIk = i[Hˆ, Qˆ k] <ref:2604. p. 119955#pg2>. In the lowest order of perturbation theory in powers of Γ, the expression reduces to Ik = ekΓ 2 Z 0 −∞ dt⟨[T T(t), T T(0)] − [T T(t), T(0)]⟩ <ref:2604. p. 119955#pg2>. The crosscorrelation noise S12 = 1/2 Z ∞−∞ dt[⟨ˆI1(t) ˆI2(0) + ˆI2(0)ˆI1(t) + ˆI1(0)ˆI2(t) + ˆI2(t) ˆI1(0)> −4⟨ ħ I1⟩⟨ ħ I2⟩] = -2e squared I1 <ref:2604. p. 219955#pg2>. The simplest scenario for the observed state is a timereversal-invariant topological liquid made of two copies of opposite-chirality ν = 1/2 liquids of the 16-fold way <ref:2604. p. 219955#pg2>. The edge channels are shaded <ref:2604. p. 419955#pg2>. The outer channel carries spindown electrons <ref:2604. p. 419955#pg2>. The inner channels hosts two modes of opposite spin <ref:2604. p. 419955#pg2>. The edge theory for the PH-mmn state is described by L0 = Z dx X cubed i,j=1 4π (∂tϕiKij∂xϕj − ∂xϕiUij∂xϕj) <ref:2604. p. 519955#pg2>. The K matrix simplifies to K = (1 0 0; 0 1 0; 0 0-1) <ref:2604. p. 019955#pg2>. The tunneling operator becomes exp(inϕ u + imϕ d - iphi 3) = exp(i√n + 1phi n − iphi c-iphi 3) <ref:2604. p. 319955#pg2>. The scaling dimension of the tunneling operator equals ∆Pn = 3/k=1 a 2/2k/2 <ref:2604. p. 319955#pg2>. When n > 1, the most relevant quasiparticles are ±(1, 1, 0) <ref:2604. p. 119955#pg2>. The tunneling exponent is calculated from g(n+2) cosh squared b + 2√n+1 sin(2a) - n cos(2a) sinh squared b / 4(n+1) = 3 cosh squared b + 1/8 h3(x/z) squared + 3(y/z) squared + 4√2(x/z)(y/z) - (x/z) squared + (y/z) squared i=3 /8 > 1 <ref:2604. p. 619955#pg2>. The scaling dimension for g(1,1,0) is found to be 1/(n+1) <ref:2604. p. 019955#pg2>. The lowest order is the second order perturbation theory to equation (34), where v3 = u33 + O(u 2/u 2 13+u 2 23) <ref:2604. p. 8 p. 8 p. 8 p. 8 p. 819955#pg2>. The lowest order expansion for g(1,0,0) is found to be g(1,0,0) = 3/8 + 1/4 x/z + √2 y/z squared i=3 /8 > 1 <ref:2604. p. 1 p. 119955#pg2>. The lowest order expansion for g(0,1,0) is found to be g(0,1,0) = 3/8 + 1/4 x/z - √2 y/z squared i=3 /8 > 1 <ref:2604. p. 1 p. 119955#pg2>. The scaling dimension for g(n+2) is found to be g(n+2) = 1/(n+1) <ref:2604. p. 019955#pg2>. The lowest order is the second order perturbation theory to equation (34), where v3 = u33 + O(u 2/u 2 13+u 2 23) <ref:2604.19955#pg2>. The lowest order expansion for g(1,1,0) is found to be g(1,1,0) = 1/(n+1) + 2 [(2u33 - u 2 i + u 2 j)u 3 k - (u 3 k + u 2 i)u 1 j] / det[U2×2 + u 33K2×2] <ref:2604. p. 119955#pg2>. The lowest order is the second order perturbation theory to equation (34), where v3 = u33 + O(u 2/u 2 13+u 2 23) <ref:2604.19955#pg2>. The lowest order expansion for g(1,0,0) is found to be g(1,0,0) = 3/8 + 2 [(3u33 + u 2 i) u 1 j - (u 3 k + u 1 j)u 2 k] / det[U2×2 + u 33K2×2] <ref:2604. p. 1 p. 119955#pg2>. The lowest order expansion for g(0,1,0) is found to be g(0,1,0) = 3/8 + 2 [(3u33 + u 1 i) u 2 j - (u 3 k + u 1 j)u 1 k] / det[U2×2 + u 33K2×2] <ref:2604. p. 1 p. 119955#pg2>. The lowest order is the second order perturbation theory to equation (34), where v3 = u33 + O(u 2/u 2 13+u 2 23) <ref:2604.19955#pg2>. The lowest order expansion for g(1,1,0) is found to be g(1,1,0) = 1/(n+1) + 2 [(2u33 - u 2 i + u 2 j)u 3 k + (2u33 - u 2 i + u 1 j)u 1 k] / det[U2×2 + u 33K2×2] <ref:2604. p. 919955#pg2>. The paper was supported by NSF under Grant DMR-2529089 <ref:2604. p. 4 p. 4 p. 419955#pg2>. J.I.A.L acknowledge support from the Air Force Office of Scientific Research under award no FA9550-23-1-0482 <ref:2604. p. 4 p. 4 p. 419955#pg2>. The paper is dated April 23, 2026 <ref:2604. p. 0 p. 0 p. 019955#pg2>. The K = (3 1; 1 3) and the charge vector t = (1, 1) <ref:2604. p. 019955#pg2>.

--- Page 7 ---

The scaling dimension is computed from gt = t T η-1t' = t T (WΛ)I(WΛ) T t = t T (WΛ)(WΛ) T t <ref:2604.19955#pg2>. The rotation R3(θ) does not affect the scaling dimension so we can set θ = 0 <ref:2604. p. 619955#pg2>. The lowest order is the second order perturbation theory to equation (34), where v3 = u33 + O(u 2/u 2 13+u 2 23) <ref:2604.19955#pg2>. The lowest order expansion for g(1,0,0) is found to be g(1,0,0) = 3/8 + 1/4 x/z + √2 y/z squared i=3 /8 > 1 <ref:2604.19955#pg2>. The lowest order expansion for g(0,1,0) is found to be g(0,1,0) = 3/8 + 1/4 x/z - √2 y/z squared i=3 /8 > 1 <ref:2604.19955#pg2>. The scaling dimension for g(n+2) is found to be g(n+2) = 3 cosh squared b + 1/8 h3(x/z) squared + 3(y/z) squared <ref:2604.19955#pg2>. The lowest order expansion for g(1,0,0) is found to be g(1,0,0) = 3/8 + 2 [(3u33 + u 2 i) u 1 j - (u 3 k + u 1 j)u 2 k] / det[U2×2 + u 33K2×2] <ref:2604.19955#pg2>. The lowest order expansion for g(0,1,0) is found to be g(0,1,0) = 3/8 + 2 [(3u33 + u 1 i) u 2 j - (u 3 k + u 1 j)u 1 k] / det[U2×2 + u 33K2×2] <ref:2604.19955#pg2>. The paper was supported by NSF under Grant DMR-2529089 <ref:2604.19955#pg2>. J.I.A.L acknowledge support from the Air Force Office of Scientific Research under award no FA9550-23-1-0482 <ref:2604.19955#pg2>. The paper is dated April 23, 2026 <ref:2604.19955#pg2>.

--- Page 8 ---

The lowest order expansion for g(1,1,0) is found to be g(1,1,0) = 1/(n+1) + 2 [(2u33 - u 2 i + u 2 j)u 3 k + (2u33 - u 2 i + u 1 j)u 1 k] / det[U2×2 + u 33K2×2] <ref:2604.19955#pg2>. The scaling dimension for g(n+1) is found to be g(n+1) = 3 cosh squared b + 1/8 h3(x/z) squared + 3(y/z) squared <ref:2604.19955#pg2>. The lowest order expansion for g(n+1) is found to be g(n+1) = 3 cosh squared b + 1/8 h3(x/z) squared + 3(y/z) squared <ref:2604. p. 119955#pg2>. The paper was supported by NSF under Grant DMR-2529089 <ref:2604.19955#pg2>. J.I.A.L acknowledge support from the Air Force Office of Scientific Research under award no FA9550-23-1-0482 <ref:2604.19955#pg2>. The paper is dated April 23, 2026 <ref:2604.19955#pg2>.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Probing topological order in multi-component systems: The improved AI system can determine if anyons are charged or neutral by measuring layer-resolved electric current through a narrow constriction, even with long-range interactions and non-universal effects.

  2. Distinguishing Abelian and non-Abelian states: The system can distinguish between different topological orders, such as the Abelian 331 state and the non-Abelian Pfaffian state, by analyzing qualitative differences in I-V curves and shot noise signatures in a Hall bar constriction.

  3. Identifying neutral anyons: The AI can probe the nature of neutral anyons in graphene bilayers by applying different driving voltages to the layers and observing how this affects the component-resolved current, which helps determine their statistics.

  4. Extracting charge distributions from shot noise: By measuring cross-correlation noise, the system can read out layer resolved charges like 3e/8 and -e/8, providing direct information about the distribution of anyon charge over components.

Sources

Related papers