Layer-by-layer water filling in molecular-scale capillaries monitored by AFM

arXiv:2604.07946 · cond-mat.mes-hall · Submitted 2026-04-09 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Quantum Radio. Generated commentary on the latest quantum physics and condensed matter papers.

Kai: We're looking at the paper: "Layer-by-layer water filling in molecular-scale capillaries monitored by AFM".

Mira: Here's the gist of the paper. Layer-by-layer water filling in molecular-scale capillaries is studied using van der Waals assembly and atomic force microscopy to observe two distinct regimes: layer-by-layer filling of flexible capillaries and abrupt filling of rigid ones The molecular discreteness of water can profoundly affect ubiquitous capillary phenomena, with wall compliance selecting between discrete and abrupt filling Experimental Setup and Observation The nanocapillaries were fabricated using van der Waals (vdW) assembly, forming multilayer graphene strips sandwiched between two atomically flat graphite crystals To monitor water filling, the top graphite crystal was chosen to have a thickness H  20-40 nm to allow measurable (Å-scale) deformations upon water imbibition Water filling was controlled using a two-chamber setup where the upper chamber provided AFM access at low humidity and the lower chamber provided variable RH AFM imaging of the top capillary walls was performed in PeakForce mode to monitor topography changes with high vertical precision Filling Regimes and Molecular Discreteness The study observed two distinct regimes during water uptake: layer-by-layer filling of flexible capillaries and abrupt filling of rigid ones Flexible walls deform in steps of 3 Å, corresponding to the sequential entry of individual water molecular layers The different filling regimes are explained by the competition between deformation energy and oscillatory wall-water interactions This suggests that wall compliance selects between discrete and abrupt filling Theoretical Framework and Energy Competition The classical continuum framework for capillarity describes the equilibrium state where the elastic force balances the capillary pressure and determines the top-wall position h after condensation occurs For molecular-scale capillaries, disjoining energy can exceed Ucap, making it important to consider entropic solvation energy Uent and vdW energy UvdW The competition between these four energy terms determines the water-filling behavior The study demonstrates that wall compliance determines whether condensation remains effectively abrupt or proceeds via sequential entry of molecular layers These findings connect the molecular-scale interfacial structure in liquids with mesoscale mechanics in a way that is directly relevant to numerous ambient processes involving nanoconfined water The mechanism revealed here should generally apply to soft nanoporous materials and may also help guide strategies for engineering responsive nanoscale systems References 1.

Kai: Gennes, P.-G., Brochard-Wyart, F.

Mira: & Quéré, D.

Kai: Capillarity and wetting phenomena: Drops, bubbles, pearls, waves 2.

Title and authors: Kai: So we're looking at this paper by Chen and Wang about layer-by-layer water filling in molecular-scale capillaries monitored by AFM. It’s interesting because it looks at how water fills these tiny tubes when you introduce humidity, and they found two very different ways this can happen depending on the wall.

Mira: Right, it's all about how molecular size affects things that we usually treat as continuous fluids. They built these nanocapillaries using van der Waals assembly and used atomic force microscopy to watch the wall change as water gets in.

Lev: The setup sounds like they are trying to get real measurements on these nanoscale deformations, which is always a challenge when you start dealing with such small features.

Kai: Exactly, and what they observed was that flexible walls show a step-by-step filling of about three angstrom increments, which is consistent with water molecules stacking up one by one.

Mira: That’s the key observation here—the sequential entry of individual water layers—and they link this directly to the wall's compliance. They suggest that how flexible the wall is determines whether you see these discrete steps or just a smooth, abrupt filling of water.

Lev: So, it sounds like the paper wants to show that we need to consider both the liquid structure and the mechanics of the container when we talk about condensation at this scale.

Kai: And they set up a two-chamber system where one side is low humidity for AFM access and the other side varies humidity, which is crucial for seeing those changes in height.

Mira: They also noted some practical constraints on their experiment, saying that below ten percent relative humidity, no measurable changes were seen because of an adsorbed water layer that just won't leave even at zero percent humidity <ref:2604.07946#pg3,of an adsorbed water layer that>.

Lev: That’s a big caveat; if you want to study the very first layer of water structure, you have to contend with what's already stuck there from before.

Kai: And then when they got above ninety percent humidity, the height changes became really small and the AFM imaging started getting unstable because a water meniscus formed between the tip and the graphite surface <ref:2604.07946#pg3,tip and the graphite surface>.

Mira: That instability is explained by a wetting layer spreading micrometers away from the capillary openings into the dry chamber, which hits the tip, which is a kind of stiction effect.

Lev: So, when you try to probe these systems with AFM under real-world conditions like varying humidity, you run into issues with surface tension effects that aren't always accounted for in simple models.

Kai: The paper then discusses the underlying physics by talking about the competition between four energy terms in a total energy term called Utot.

Title and authors: Mira: They point out that for molecular-scale capillaries, the entropic term is especially important here because it creates energy minima when the capillary height is an integer multiple of sigma, which is about three angstroms.

Lev: I wonder if that entropic term really dominates when you're talking about these small deformations in a flexible wall versus a rigid one.

Kai: They used some characteristic numbers to estimate this, saying that for the flexible wall with a height of twenty nanometers, the combined capillary and disjoining pressures overwhelmed the elastic restoring force, leading to negative Utot with pronounced energy minima corresponding to one, two, three and four water monolayers inside <ref:2604.07946#pg3>.

Mira: That result is pretty telling; it means that for flexible walls, the system wants to settle into a state where it's holding a specific number of molecular layers in there because of those energy minima.

Lev: So if you're designing something nanoscale, knowing that the elastic force can be overcome by these pressure terms tells you that your mechanical design has to account for that energy competition.

Kai: The paper also calculated the free energy for a model capillary with six layers as a function of the number of water layers inside, and they found that the minimum in Utot corresponds to the equilibrium state where elastic force balances capillary pressure and determines the top wall position after condensation.

Mira: That confirms what we suspected—the minimum in that total energy represents the stable filling pathway, which is dictated by how those four energy terms balance out.

Lev: For a real quantum system, if you can map that competition onto your error landscape, it would help you predict which configurations are stable under noisy conditions.

Kai: The main implication for us is that this mechanism should apply to soft nanoporous materials generally, and it could guide how we engineer responsive nanoscale systems.

Mira: It connects the microscopic structure of liquids right to mesoscale mechanics in a way that's relevant to things like adhesion or friction in granular media, which is pretty broad.

Lev: If this holds up when you scale up the complexity, we might be able to predict how those large-scale mechanical behaviors emerge from these tiny molecular interactions.

Kai: So the main thing they're driving home with this paper, "Layer-by-layer water filling in molecular-scale capillaries monitored by AFM," is that wall compliance decides whether you get a smooth transition or discrete steps in water filling.

Mira: And it shows that even when you think about classical continuum models, the molecular reality of discreteness can completely change the picture of how condensation happens under ambient conditions.

Lev: We'll see if we can translate this energy competition into something useful for designing better quantum devices where confinement and surface effects are critical.

Kai: So that’s what they’re showing us about these molecular capillaries and wall compliance, and that sets us up to think about how other ambient processes behave at the nanoscale.

The paper's summary: Kai: So this paper basically says that when you look at water filling in these tiny molecular tubes using atomic force microscopy, there are two very different ways it can happen depending on how flexible the walls are.

Mira: Right, they found this competition between the energy of deforming the wall and how much the water pushes back against those wall movements. That's what’s driving these two regimes.

Kai: The key result is that for flexible walls, you don't just see one big jump when humidity changes; you see little steps in height, about three angstrom increments, which matches how water molecules stack up one by one.

Mira: And the authors explain that this happens because the entropic term in their total energy calculation has these energy minima that line up with integer numbers of water layers inside.

Kai: That’s really important because it means you can predict exactly how many layers of water are trapped inside a capillary just by looking at its height.

Mira: They show that for a flexible wall, the combined forces—the capillary pressure and the disjoining pressure—actually overpower the wall's ability to spring back when it tries to deform.

Kai: That leads them to this total energy calculation where they find that for a flexible wall with a diameter of twenty nanometers, there are pronounced energy minima corresponding to one, two, three, and four water layers inside.

Mira: So instead of a smooth transition or an abrupt filling you might see in bigger tubes, the system settles into one of these discrete states depending on the wall material.

Kai: It’s not just about what happens when it’s very wet; it’s about how the physical structure of the container dictates that path.

Mira: This connects what happens at a molecular level—the way water molecules stack—to larger mechanical properties of materials, which is pretty big for understanding things like adhesion and friction in granular stuff.

Kai: It suggests that if you want to engineer nanoscale systems responsive to humidity or liquid uptake, you have to look beyond just the fluid physics and really consider that wall compliance.

Mira: And they’re hinting that this idea about wall compliance choosing between discrete steps versus abrupt filling could apply to many soft nanoporous materials we see in ambient conditions.

Kai: It shifts the view away from just one single condensation event and toward a sequence of events dictated by the microscopic structure of the interface.

The paper's improvements: Tom: So this paper goes on to suggest ways to make these kinds of measurements better or more predictive than just what they did initially.

Kai: They’re talking about how you can use the results to actually predict what will happen next instead of just observing it once.

Mira: The main idea is that you can use the energy competition we discussed earlier, with the four energy terms, to predict which filling pathway a capillary will take based on its initial height.

Kai: Specifically, they’re proposing using a model where if your initial height is between two of those energy minima—say sigma less than your height less than one point five times sigma—then changes in humidity can actually drive the system straight into that low-height equilibrium state.

Mira: That means you could identify the conditions, like humidity, that force the capillary to settle into a specific number of water layers inside before it even starts filling.

Kai: It moves from just looking at static measurements to identifying initial conditions that steer a dynamic process.

Mira: And they suggest this framework isn't just for these simple molecular tubes; it’s meant for soft nanoporous materials in general, which is where things get really interesting because those are the materials we deal with in real-world applications.

Kai: It suggests that if we can map out these energy landscapes, maybe we can design responsive nanoscale systems that switch their behavior based on environmental changes.

Mira: Right, it connects the microscopic structure of liquids to mesoscale mechanics in a way that’s relevant to adhesion and friction in granular media, which is pretty big for how things stick together.

Kai: So the next step seems to be taking these predictions and trying to see if we can test them on more complex systems that have even more layers or different wall structures.

Conclusion: Kai: So to wrap up, this paper on "Layer-by-layer water filling in molecular-scale capillaries monitored by AFM" shows that wall compliance is what decides whether you get smooth filling or those discrete steps we talked about earlier.

Mira: Yeah, it’s about how the microscopic structure of the liquid and the mechanics of the container interact to determine if condensation is abrupt or sequential.

Kai: It really connects these tiny molecular stacking effects to larger mechanical behaviors in soft nanoporous materials that we see all around.

Lev: From an engineering standpoint, knowing this competition between deformation energy and those oscillatory wall-water interactions helps us set better expectations for how these systems will behave when we try to build actual hardware that needs to handle moisture or liquid ingress.

Kai: It suggests that if you want to design responsive nanoscale devices, you can't just rely on classical continuum models; you have to account for the molecular discreteness of the water itself.

Mira: Exactly, it means our understanding of capillary condensation under ambient conditions needs to incorporate this layer-by-layer physics instead of assuming a single abrupt transition always happens.

Lev: If we take these energy competition terms and try to model them on real hardware, the computational overhead for simulating those many energy minima will be significant, but the fidelity gain in predicting failure modes could be valuable.

Kai: So this work on "Layer-by-layer water filling in molecular-scale capillaries monitored by AFM" gives us a much clearer picture of how these tiny interfaces behave under real conditions.

Mira: It’s a nice piece of work showing that the classical view of abrupt filling can be altered by wall compliance when you look at the forces involved.

Lev: Anyway, this is cool because it sets up some interesting questions for how we model even more complex confinement scenarios, like those in high-pressure environments.

Kai: Definitely. We’ll see if we can use these energy landscape predictions to guide our next set of experiments on water transport in different types of confined geometries.

Mingwei Chen, Jingshan Wang, Artem Mishchenko, Ivan Timokhin, Fengchao Wang, Andre K. Geim, Qian Yang

National Graphene Institute, University of Manchester, University of Manchester, Department of Modern Mechanics, University of Science and Technology of China

cond-mat.mes-hall

Submitted: 2026-04-09

Updated: 2026-11-09

License: http://creativecommons.org/licenses/by/4.0/

Importance score: 92/100

The gist: Layer-by-layer water filling in molecular-scale capillaries is studied using van der Waals assembly and atomic force microscopy to observe two distinct regimes…

Key concepts

Layer-by-layer filling
This describes a process where water enters a capillary one molecular layer at a time. It happens when the capillary walls are flexible, allowing them to deform gradually as water is added. This contrasts with abrupt filling, which is typical for very rigid structures.
Wall compliance
This refers to how easily the capillary wall can bend or deform in response to water pressure. The study found that this compliance acts as a selector; it determines whether the system follows a smooth, stepwise filling process or an immediate, abrupt condensation transition.
Utot energy competition
This is a mathematical framework used to determine how water fills the capillary. It involves balancing four different energies: elastic deformation energy, capillary pressure, disjoining energy (molecular forces), and entropic solvation energy. The balance dictates the final filling state.
Molecular discreteness
This refers to the fact that water molecules are discrete entities with a specific size and spacing. Because of this discreteness, the filling process is not always smooth; it can be governed by the precise spacing between water layers, leading to quantized or stepwise filling patterns.

Terminology

Summary

Layer-by-layer water filling in molecular-scale capillaries is studied using van der Waals assembly and atomic force microscopy to observe two distinct regimes: layer-by-layer filling of flexible capillaries and abrupt filling of rigid ones The molecular discreteness of water can profoundly affect ubiquitous capillary phenomena, with wall compliance selecting between discrete and abrupt filling

Experimental Setup and Observation

The nanocapillaries were fabricated using van der Waals (vdW) assembly, forming multilayer graphene strips sandwiched between two atomically flat graphite crystals To monitor water filling, the top graphite crystal was chosen to have a thickness H  20-40 nm to allow measurable (Å-scale) deformations upon water imbibition Water filling was controlled using a two-chamber setup where the upper chamber provided AFM access at low humidity and the lower chamber provided variable RH AFM imaging of the top capillary walls was performed in PeakForce mode to monitor topography changes with high vertical precision

Filling Regimes and Molecular Discreteness

The study observed two distinct regimes during water uptake: layer-by-layer filling of flexible capillaries and abrupt filling of rigid ones Flexible walls deform in steps of 3 Å, corresponding to the sequential entry of individual water molecular layers The different filling regimes are explained by the competition between deformation energy and oscillatory wall-water interactions This suggests that wall compliance selects between discrete and abrupt filling

Theoretical Framework and Energy Competition

The classical continuum framework for capillarity describes the equilibrium state where the elastic force balances the capillary pressure and determines the top-wall position h after condensation occurs For molecular-scale capillaries, disjoining energy can exceed Ucap, making it important to consider entropic solvation energy Uent and vdW energy UvdW The competition between these four energy terms determines the water-filling behavior

Conclusion and Broader Implications

The study demonstrates that wall compliance determines whether condensation remains effectively abrupt or proceeds via sequential entry of molecular layers These findings connect the molecular-scale interfacial structure in liquids with mesoscale mechanics in a way that is directly relevant to numerous ambient processes involving nanoconfined water The mechanism revealed here should generally apply to soft nanoporous materials and may also help guide strategies for engineering responsive nanoscale systems

References

  1. Gennes, P.-G., Brochard-Wyart, F. p. 7

    Where the paper says it

    8 References 1. , Brochard-Wyart, F.

    & Quéré, D. p. 7
    Where the paper says it

    , Brochard-Wyart, F. & Quéré, D.

    Capillarity and wetting phenomena: Drops, bubbles, pearls, waves

  2. Israelachvili, J. p. 7

    Where the paper says it

    Springer (2004). Israelachvili, J.

    N. Intermolecular and surface forces

  3. van Honschoten, J. p. 7

    Where the paper says it

    Academic Press (2011). van Honschoten, J.

    W., Brunets, N. p. 7
    Where the paper says it

    van Honschoten, J. , Brunets, N.

    p. 7
    Where the paper says it

    van Honschoten, J. , Brunets, N.

    & Tas, N. R. Capillarity at the nanoscale

  4. Cai, J., Chen, Y., Liu, Y., Li, S. & Sun, C. Capillary imbibition and flow of wetting liquid in irregular capillaries: A 100-year review

  5. Eijkel, J. C. T. & Berg, A. v. d. Nanofluidics: what is it and what can we expect from it? p. 7

    Where the paper says it

    Advances in Colloid and Interface Science 304, 102654 (2022). Nanofluidics: what is it and what can we expect from it?

    Microfluidics and Nanofluidics 1, 249-267

  6. Robin, P. & Bocquet, L. p. 7

    Where the paper says it

    Microfluidics and Nanofluidics 1, 249-267 (2005). & Bocquet, L.

    Nanofluidics at the crossroads

  7. Emmerich, T. p. 7

    Where the paper says it

    The Journal of Chemical Physics 158 (2023). Emmerich, T.

    et al. Nanofluidics

  8. Yang, Q. et al. Capillary condensation under atomic-scale confinement

  9. Nazari, M., Davoodabadi, A. p. 7

    Where the paper says it

    Nature 588, 250-253 (2020). , Davoodabadi, A.

    , Huang, D. p. 7
    Where the paper says it

    , Davoodabadi, A. , Huang, D.

    , Luo, T. & Ghasemi, H. p. 7
    Where the paper says it

    , Huang, D. & Ghasemi, H.

    Transport phenomena in nano/molecular confinements

  10. Gravelle, S. p. 7

    Where the paper says it

    ACS Nano 14, 16348-16391 (2020). Gravelle, S.

    , Ybert, C. p. 7
    Where the paper says it

    Gravelle, S. , Ybert, C.

    , Bocquet, L. p. 7
    Where the paper says it

    Microfluidics and Nanofluidics 1, 249-267 (2005). & Bocquet, L.

    & Joly, L. Anomalous capillary filling and wettability reversal in nanochannels

  11. Chen, Z., Yang, J., Ma, C., Zhou, K. & Jiao, S. Continuous water filling in a graphene nanochannel: A molecular dynamics study

  12. Kapil, V. et al. The first-principles phase diagram of monolayer nanoconfined water

  13. Fenter, P. & Lee, S. S. Hydration layer structure at solid–water interfaces

  14. Björneholm, O. p. 7

    Where the paper says it

    MRS Bulletin 39, 1056-1061 (2014). Björneholm, O.

    et al. Water at interfaces

  15. Garcia, R. Interfacial liquid water on graphite, graphene, and 2D materials

  16. Söngen, H. p. 7

    Where the paper says it

    ACS Nano 17, 51-69 (2023). Söngen, H.

    et al. Hydration layers at the graphite-water interface: Attraction or confinement

  17. Lin, W. & Klein, J. p. 7

    Where the paper says it

    Physical Review B 100 (2019). & Klein, J.

    Direct measurement of surface forces: Recent advances and insights

  18. Petrov, P., Miklavcic, S. p. 7

    Where the paper says it

    Applied Physics Reviews 8, 031316 (2021). , Miklavcic, S.

    , Olsson, U. p. 7
    Where the paper says it

    , Miklavcic, S. , Olsson, U.

    & Wennerstroem, H. p. 7
    Where the paper says it

    , Olsson, U. & Wennerstroem, H.

    A confined complex liquid

  19. Lei, Y. & Leng, Y. Force oscillation and phase transition of simple fluids under confinement

  20. Chakraborty, S. p. 7

    Where the paper says it

    Physical Review E 82 (2010). Chakraborty, S.

    , Kumar, H. p. 7
    Where the paper says it

    Chakraborty, S. , Kumar, H.

    , Dasgupta, C. p. 7
    Where the paper says it

    , Kumar, H. , Dasgupta, C.

    & Maiti, P. p. 7
    Where the paper says it

    , Dasgupta, C. & Maiti, P.

    K. Confined water: Structure, dynamics, and thermodynamics

  21. Ochoa, C., Gao, S., Srivastava, S. p. 7

    Where the paper says it

    Accounts of Chemical Research Research 50, 2139-2146 (2017). , Srivastava, S.

    & Sharma, V. p. 7
    Where the paper says it

    , Srivastava, S. & Sharma, V.

    Foam film stratification studies probe intermicellar interactions

  22. Geim, A. K. Exploring two-dimensional empty space

  23. Ronceray, N. p. 7

    Where the paper says it

    Nano Letters 21, 6356-6358 (2021). Ronceray, N.

    et al. Elastocapillarity-driven 2D nano-switches enable zeptoliter-scale liquid encapsulation

  24. Cambré, S. p. 7

    Where the paper says it

    Nature Communications 15 (2024). Cambré, S.

    , Schoeters, B. p. 7
    Where the paper says it

    Cambré, S. , Schoeters, B.

    , Luyckx, S. p. 7
    Where the paper says it

    , Schoeters, B. , Luyckx, S.

    , Goovaerts, E. p. 7
    Where the paper says it

    , Luyckx, S. , Goovaerts, E.

    & Wenseleers, W. p. 7
    Where the paper says it

    , Goovaerts, E. & Wenseleers, W.

    Experimental observation of singlefile water filling of thin single-wall carbon nanotubes down to chiral index (5,3)

  25. Agrawal, K. p. 7

    Where the paper says it

    Physical Review Letters 104 (2010). Agrawal, K.

    V., Shimizu, S. p. 7
    Where the paper says it

    Agrawal, K. , Shimizu, S.

    , Drahushuk, L. p. 7
    Where the paper says it

    , Shimizu, S. , Drahushuk, L.

    W., Kilcoyne, D. p. 7
    Where the paper says it

    , Drahushuk, L. , Kilcoyne, D.

    & Strano, M. p. 7
    Where the paper says it

    , Kilcoyne, D. & Strano, M.

    S. Observation of extreme phase transition temperatures of water confined inside isolated carbon nanotubes

  26. Faucher, S. p. 7

    Where the paper says it

    Nature Nanotechnology 12, 267-273 (2017). Faucher, S.

    et al. Diameter dependence of water filling in lithographically segmented isolated carbon nanotubes

  27. Li, Z. et al. Breakdown of the Nernst–Einstein relation in carbon nanotube porins

  28. Wang, R. et al. In-plane dielectric constant and conductivity of confined water

  29. Haneveld, J. p. 8

    Where the paper says it

    Haneveld, J. , Brunets, N.

    , Tas, N. R., Brunets, N., Jansen, H. p. 8
    Where the paper says it

    , Brunets, N. , Jansen, H.

    V. & Elwenspoek, M. p. 8
    Where the paper says it

    , Jansen, H. & Elwenspoek, M.

    Capillary filling of sub-10nm nanochannels

  30. Cao, P., Xu, K., Varghese, J. p. 8

    Where the paper says it

    Journal of Applied Physics 104, 014309 (2008). , Varghese, J.

    O. & Heath, J. p. 8
    Where the paper says it

    , Varghese, J. & Heath, J.

    R. The microscopic structure of adsorbed water on hydrophobic surfaces under ambient conditions

  31. Uhlig, M. R. & Garcia, R. p. 8

    Where the paper says it

    Nano Letters 11, 5581-5586 (2011). & Garcia, R.

    In situ atomic-scale imaging of interfacial water under 3D nanoscale confinement

  32. Gor, G. Y. & Bernstein, N. p. 8

    Where the paper says it

    Nano Letters 21, 5593-5598 (2021). & Bernstein, N.

    Revisiting Bangham's law of adsorption-induced deformation: Changes of surface energy and surface stress

  33. Sanchez, J. p. 8

    Where the paper says it

    Physical Chemistry Chemical Physics 18, 9788-9798 (2016). Sanchez, J.

    , Dammann, L. p. 8
    Where the paper says it

    Sanchez, J. , Dammann, L.

    , Gallardo, L. p. 8
    Where the paper says it

    , Dammann, L. , Gallardo, L.

    & Huber, P. p. 8
    Where the paper says it

    , Gallardo, L. & Huber, P.

    Deformation dynamics of nanopores upon water imbibition

  34. Sridi, N., Lebental, B. p. 8

    Where the paper says it

    121, e2318386121 (2024). , Lebental, B.

    , Azevedo, J. p. 8
    Where the paper says it

    , Lebental, B. , Azevedo, J.

    , Gabriel, J. p. 8
    Where the paper says it

    , Azevedo, J. , Gabriel, J.

    Christophe P. p. 8
    Where the paper says it

    , Gabriel, J. Christophe P.

    , Ghis, A. Electrostatic method to estimate the mechanical properties of suspended membranes applied to nickel-coated graphene oxide

  35. Landau, L. D., Lifshitz, E. p. 8

    Where the paper says it

    Applied Physics Letters 103, 051907 (2013). , Lifshitz, E.

    M., Kosevich, A. p. 8
    Where the paper says it

    , Lifshitz, E. , Kosevich, A.

    M. & Pitaevskii, L. p. 8
    Where the paper says it

    , Kosevich, A. & Pitaevskii, L.

    P. Theory of elasticity

  36. Cerda, E. & Mahadevan, L. p. 8

    Where the paper says it

    Elsevier (1986). & Mahadevan, L.

    Geometry and physics of wrinkling

  37. Wu, Y. & Aluru, N. p. 8

    Where the paper says it

    Physics Review Letters 90, 074302 (2003). & Aluru, N.

    R. Graphitic carbon–water nonbonded interaction parameters

  38. Plimpton, S. p. 8

    Where the paper says it

    Journal of Physical Chemistry B 117, 8802-8813 (2013). Plimpton, S.

    Fast parallel algorithms for short-range molecular dynamics

Page 1

Layer-by-layer water filling in molecular-scale capillaries is studied using van der Waals assembly and atomic force microscopy to observe two distinct regimes: layer-by-layer filling of flexible capillaries and abrupt filling of rigid ones The molecular discreteness of water can profoundly affect ubiquitous capillary phenomena, with wall compliance selecting between discrete and abrupt filling

Page 2

The studied nanocapillaries were fabricated using van der Waals (vdW) assembly, as reported previously and described in ‘Device fabrication’ in Supplementary Information (SI) To monitor water filling, the nanocapillary walls were made flexible to allow measurable (Å-scale) deformations upon water imbibition The degree of sagging depended critically on the top wall's bending rigidity which scaled as  H / w 4 (SI)

Page 3

The upper chamber, which provided AFM access to the capillary top surface, was maintained at low humidity (RH  10%) using a desiccant, while the lower chamber provided variable RH Above 90% RH, changes in h were very small and AFM imaging became unstable due to a water meniscus frequently forming between the AFM tip and the graphite surface

Three flattenings, spaced by 3.0 ± 0.2 Å, consistent with both the intermolecular spacing in bulk water (3. p. 3

Where the paper says it

The plateaus are separated by 3. 2 Å, consistent with both the intermolecular spacing in bulk water (3.

p. 3
Where the paper says it

The plateaus are separated by 3. 2 Å, consistent with both the intermolecular spacing in bulk water (3.

1 Å) and the spacing typical for the first 1-3 water layers near graphite surfaces (3 Å)

Page 4

In essence, the nanocapillaries swelled with increasing RH such that the top wall gradually lifted up and the capillary height smoothly increased Pronounced flattenings appeared over certain RH intervals, with three plateau-like features evident in Fig. 1c The plateaus are separated by 3. p. 3

Where the paper says it

1c with the most prominent one spanning a wide range from 35% to 55% RH. The plateaus are separated by 3.

0 ± 0.2 Å, consistent with both the intermolecular spacing in bulk water (3.1 Å) and the spacing typical for the first 1-3 water layers near graphite surfaces (3 Å)

Page 5

The competition between the four energy terms in Utot determines the water-filling behavior For molecular-scale capillaries, the entropic term is particularly important because it generates energy minima at integer h/, reflecting commensurability between the capillary height and the stratified water structure

Using E  1,000 GPa,   0.3 and θ  60 together with w  150 nm and H ≈30 nm, characteristic of graphite and our nanocapillaries, estimates show that Uel becomes comparable to Ucap when top-wall deformations reach 1 nm For the more flexible wall (H = 20 nm), however, the combined capillary and disjoining pressures overwhelm the elastic restoring force, leading to negative Utot with pronounced energy minima, corresponding to 1, 2, 3 and 4 water monolayers inside the 2D capillary

Page 6

The competition between the four energy terms in Utot determines the water-filling behavior In contrast, for molecular-scale capillaries, the disjoining energy can exceed Ucap The entropic term is particularly important because it generates energy minima at integer h/, reflecting commensurability between the capillary height and the stratified water structure

Page 7

The calculated free energy of a model capillary with N = 6 as a function of number of water layers inside The minimum in Utot corresponds to the equilibrium state where the elastic force balances the capillary pressure and determines the top-wall position h after the condensation transition occurs

Page 8

The mechanism revealed here should generally apply to soft nanoporous materials and may also help guide strategies for engineering responsive nanoscale systems The study shows that in capillary condensation phenomena ubiquitous under ambient conditions, the filling pathway can depart qualitatively from the classical, century-old picture: instead of a single abrupt condensation transition, capillary filling can proceed through discrete, layer-by-layer states The key insight is that wall compliance determines whether condensation remains effectively abrupt (despite the stratification of water under molecular-scale confinement), as expected in a continuum framework, or proceeds via sequential entry of molecular layers

More broadly, our findings connect the molecular-scale interfacial structure in liquids with mesoscale mechanics in a way that is directly relevant to numerous ambient processes involving nanoconfined water, including adhesion/stiction, friction/lubrication and capillary-driven cohesion in granular media (e.g., sandcastles) The mechanism revealed here should generally apply to soft nanoporous materials and may also help guide strategies for engineering responsive nanoscale systems

The study shows that in capillary condensation phenomena ubiquitous under ambient conditions, the filling pathway can depart qualitatively from the classical, century-old picture: instead of a single abrupt condensation transition, capillary filling can proceed through discrete, layer-by-layer states The key insight is that wall compliance determines whether condensation remains effectively abrupt (despite the stratification of water under molecular-scale confinement), as expected in a continuum framework, or proceeds via sequential entry of molecular layers

More broadly, our findings connect the molecular-scale interfacial structure in liquids with mesoscale mechanics in a way that is directly relevant to numerous ambient processes involving nanoconfined water, including adhesion/stiction, friction/lubrication and capillary-driven cohesion in granular media (e.g.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. System can predict capillary filling pathways based on wall compliance rather than assuming a single abrupt transition, allowing it to distinguish between smooth stepwise filling and abrupt condensation based on wall thickness variations (H 30 nm).

  2. The improved system can model the competition between deformation energy and oscillatory wall-water interactions to select between discrete and abrupt filling regimes in molecular-scale capillaries.

  3. The system can quantitatively predict the equilibrium state of a capillary by calculating Utot, showing that for flexible walls, the combined capillary and disjoining pressures overwhelm the elastic restoring force, leading to negative Utot with pronounced energy minima.

  4. It can predict the number of water monolayers inside a 2D capillary based on its height relative to the monolayer thickness sigma using an analytical model derived from MD simulations, showing energy minima appear close to integer h/sigma.

  5. The system can identify initial conditions that lead to specific filling behaviors by predicting that "if the initial height of a nanocapillary happens to fall between two energy minima (for example, sigma < h < 1.5sigma; see Fig. 2c) changes in RH may first drive the system into the low-h equilibrium state."

Abstract

Under ambient humidity, water spontaneously condenses in pores only a few nanometers in size, making nanoscale capillarity central to numerous natural phenomena and technological applications. At these dimensions, water may no longer be treated as a continuous fluid, yet the consequences of molecular discreteness for capillary condensation and filling remain poorly understood. Here we study two-dimensional (2D) nanocapillaries fabricated by van der Waals assembly and, using atomic force microscopy (AFM), monitor their wall deformations during humidity-driven water uptake. We observe two distinct regimes: layer-by-layer filling of flexible capillaries and abrupt filling of more rigid ones. Flexible walls deform in around 3 Å steps, consistent with the entry of individual molecular layers of water. The different filling regimes are explained by a competition between wall deformation energy and oscillatory wall-water interactions. These results, together with the theoretical framework developed here, show how molecular discreteness can profoundly affect ubiquitous capillary phenomena, with wall rigidity determining whether this discreteness is exposed or hidden within an apparently classical, Kelvin-like response.

Related papers