Bubbles in highly porous media: Clogging and unclogging at constrictions

arXiv:2603.28511 · cond-mat.soft, physics.flu-dyn · Submitted 2026-03-30 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Condensed Matter. The day in condensed matter: materials, phases and the measurements under them.

Kai: We're looking at the paper: "Bubbles in highly porous media".

Mira: Here's the gist of the paper. Gas bubble transport through highly porous transport layers (PTLs) is a key process in electrochemical devices such as proton exchange membrane water electrolyzers, where bubbles generated at catalyst surfaces must migrate through complex porous networks <ref:2603.28511#pg2>.

Kai: The study focuses on modeling the motion of single, paired and multiple bubbles in capillaries to understand clogging and unclogging mechanisms <ref:2603.28511#pg2>.

Mira: Fundamental Physical Principles The transport of bubbles through PTLs is governed by the interplay between buoyancydriven forces, capillary resistance, and hydrodynamic stresses within the liquid phase <ref:2603.28511#pg3>.

Kai: Constrictions act as bottlenecks where capillary barriers arise, leading to localized clogging events <ref:2603.28511#pg3>.

Paper summary: Kai: So, looking at "Bubbles in highly porous media: Clogging and unclogging at constrictions," the paper establishes a dimensionless framework for predicting gas transport through highly porous media by focusing on these pore-scale constrictions.

Mira: The authors model how single, paired, and multiple bubbles behave as they navigate these complex networks, and they show how the interplay between buoyancy forces, capillary resistance, and hydrodynamics dictates whether you get a clog or an unclog.

Lev: For someone building real hardware like error correction systems or electrolyzers, this framework helps define the boundaries for what we need to model when designing those materials.

Kai: What this means for the world is that understanding these specific pore-scale physics allows us to design better components for electrochemical devices, improving their efficiency and stability by anticipating where transport bottlenecks will occur.

Mira: It shows how even at the micro-level, the physics of fluid flow in porous materials can be rigorously analyzed using tools like lattice Boltzmann methods and clear dimensionless numbers.

Lev: The paper gives us a predictive tool for understanding when things get stuck or move, which is always useful before you start expensive physical prototyping.

Conclusion: Kai: So, this paper is about how bubbles move through these really tight porous layers and how they get stuck or move again when they hit a narrow spot.

Mira: It focuses on modeling single bubbles, pairs of bubbles, and even multiple bubbles in capillaries to figure out the mechanisms behind clogging and unclogging.

Lev: From an engineering standpoint, this is about understanding the physical limits of transport in these networks so we know what to expect when we build things like proton exchange membrane electrolyzers.

Kai: The authors developed a way to predict the critical Bond number, Bocr—which is basically the minimum value needed for a single bubble to get through that constriction.

Mira: They derive this expression by relating the Laplace pressure from the bubble deforming to gravity forces, and they found that Bocr depends only on one thing: the confinement ratio C.

Lev: That dependence on just one geometric ratio is important because it means we can predict clogging based purely on the shape of the pore structure, not some complex fluid dynamic correction.

Kai: The simulation used a multiphase lattice Boltzmann method with a D3Q19 lattice to see how bubbles and the carrier fluid behave at that constriction.

Mira: They looked at bubble pairs too, finding extra pathways for clogging or unclogging caused by pressure buildup in the space between them, which they call hydrodynamic unclogging.

Lev: Hydrodynamic unclogging happens when pressure builds up behind the leading bubble as fluid gets squeezed out of that interbubble gap.

Kai: Experimentally, they used x-ray radiography on bubble chains in nickel foam to check if their clogging and unclogging predictions actually hold up in the real world.

Mira: The experimental results confirmed their model, showing that the unclogging they saw was mostly due to those hydrodynamic effects we talked about rather than just the coalescence of bubbles.

Lev: So, this work provides a way to predict when things get stuck or move based on the pore geometry and fluid pressure.

Kai: It gives us a clearer picture of why bubbles behave the way they do in these complex media, which is crucial for designing better electrochemical devices.

Helmholtz-Institut Erlangen-N¨urnberg f¨ur Erneuerbare Energien (IET–2) · Department of Chemical and Biological Engineering, Friedrich-Alexander-Universit¨at Erlangen-N¨urnberg · Institute of Fluid Dynamics, Helmholtz-Zentrum Dresden Rossendorf · Institute of Process Engineering and Environmental Technology, Technische Universit¨at Dresden · Department of Chemical and Biological Engineering and Department of Physics, Friedrich-Alexander-Universit¨at Erlangen-N¨urnberg

cond-mat.soft, physics.flu-dyn

Submitted: 2026-03-30

Updated: 2026-11-10

Comments: 17 pages, 8 figures

Journal ref: Physical Review Fluids (2026)

License: http://creativecommons.org/licenses/by/4.0/

Importance score: 77/100

The gist: Gas bubble transport through highly porous transport layers (PTLs) is a key process in electrochemical devices such as proton exchange membrane water electrolyzers…

Key concepts

Bond number (Bocr)
This dimensionless number determines the minimum force required for a single bubble to pass through a constriction. It is calculated by balancing the driving forces, like buoyancy and gravity, against the capillary resistance caused by surface tension at that specific pore size.
Capillary barrier
This refers to the physical resistance bubbles face when trying to enter a narrow passage or constriction in the porous medium. The geometry of this constriction significantly amplifies this barrier, making it harder for a bubble to move through.
Hydrodynamic unclogging
This is a specific mechanism where bubble pairs clear a blockage not by merging (coalescence), but by pressure buildup within the liquid film between them. As fluid is squeezed out of this gap, the pressure change drives the leading bubble forward, effectively unclogging the path.

Terminology

Summary

Gas bubble transport through highly porous transport layers (PTLs) is a key process in electrochemical devices such as proton exchange membrane water electrolyzers, where bubbles generated at catalyst surfaces must migrate through complex porous networks <ref:2603. p. 0

Where the paper says it

1, 91058 Erlangen, Germany 3 Institute of Fluid Dynamics, Helmholtz-Zentrum Dresden-Rossendorf, 01328 Dresden, Germany 4 Institute of Process Engineering and Environmental Technology, Technische Universit¨at Dresden, 01062 Dresden, Germany 5Department of Chemical and Biological Engineering and Department of Physics, Friedrich-Alexander-Universit¨at Erlangen-N¨urnberg, Cauerstr. 1, 91058 Erlangen, Germany Gas bubble transport through highly porous transport layers (PTLs) is a key process in electrochemical devices such as proton exchange membrane water electrolyzers, where bubbles generated at catalyst surfaces must migrate through complex porous networks.

28511#pg2>. The study focuses on modeling the motion of single, paired and multiple bubbles in capillaries to understand clogging and unclogging mechanisms <ref:2603. p. 0
Where the paper says it

To understand this process, we focus on model systems, namely the motion of single, paired and multiple bubbles in capillaries and study these by combining analytical modeling, three-dimensional color-gradient lattice Boltzmann simulations, and X-ray radiography. For single bubbles, we derive an analytical expression for the critical Bond number separating passage from clogging and show that, in the low deformation regime, it accurately predicts this transition in circular capillaries.

28511#pg2>.

Fundamental Physical Principles

The transport of bubbles through PTLs is governed by the interplay between buoyancydriven forces, capillary resistance, and hydrodynamic stresses within the liquid phase <ref:2603.28511#pg3>. Constrictions act as bottlenecks where capillary barriers arise, leading to localized clogging events <ref:2603. p. 1

Where the paper says it

In addition to the above-mentioned PTLs and catalytic systems [10–12], bubble dynamics across porous materials also plays a critical role in microfluidic diagnostics [13, 14], and in geological flows where the migration of trapped gas influences permeability and phase distribution [15]. In all of these systems, constrictions function as bottlenecks where capillary barriers arise, and flow may transition sharply between passage and clogging.

28511#pg3>. The fundamental physics of a bubble approaching a constriction is determined by the balance between the driving force and the interfacial tension, commonly expressed by the Bond number <ref:2603. p. 1
Where the paper says it

In all of these systems, constrictions function as bottlenecks where capillary barriers arise, and flow may transition sharply between passage and clogging. The fundamental physics of a bubble approaching a constriction is determined by the balance between the driving force and the interfacial tension, commonly expressed by the Bond number.

28511#pg3>. Geometric confinement amplifies the capillary barrier that must be overcome for entry <ref:2603. p. 1
Where the paper says it

This interplay between curvature, confinement, and forcing underlies classical descriptions of snap-off and capillary penetration, which have been studied in detail in experiments, theory, and simulations [16–22]. Related analyses for droplets and soft particles squeezing through narrow openings [23, 24] formalize the same principle: geometric confinement amplifies the capillary barrier that must be overcome for entry.

28511#pg3>.

Analytical Framework for Single Bubbles

The critical Bond number, Bocr, is defined as the minimum value required for a single bubble to pass through the constriction <ref:2603.28511#pg6>. The authors derive an analytical expression for this critical Bond number based on a model that relates Laplace pressure due to bubble deformation and gravity-induced driving forces <ref:2603. p. 3

Where the paper says it

For Bo < Bocr, a single bubble gets trapped upstream of the constriction; for Bo > Bocr, it passes. We estimate the critical Bond number using a simple analytical model that relates the Laplace pressure due to bubble deformation induced by the constriction and gravity-induced driving forces.

28511#pg6>. The resulting expression for the critical Bond number, Bocr, depends solely on the confinement ratio C <ref:2603. p. 4
Where the paper says it

(10) and Eq. (7) and with the definition of the confinement ratio, we obtain Bocr = 3 C 2 + Cβ − β 2 2 2C (C4 − C2β 2 + β 4) (14) as an expression for the critical Bond number with β = 4 + p 5C6 − 16C3 + 16 − 2C3 1 3 .

28511#pg6>.

Numerical Simulation Methodology

The numerical method employed is a multiphase lattice Boltzmann method to simulate bubbles moving through a constriction <ref:2603.28511#pg8>. The simulation utilizes a D3Q19 lattice and involves evolving distribution functions for both the bubble and carrier fluid <ref:2603. p. 6

Where the paper says it

7 We consider two immiscible fluids, related to the bubbles b and carrier fluid c, each evolving according to its own distribution functions f b i and f c i . For fluid k = b or c, mass density and momentum are computed from these distribution functions as ρk = ρ0 X i f k i and ρkuk = ρ0 X i f k i ci (24) with ρ0 = 1 being the unit mass.

28511#pg8>. Specific operators are used to reproduce Navier-Stokes equations, interfacial forces, gravity-induced acceleration, and immiscibility <ref:2603. p. 6
Where the paper says it

This results in a sequence of collision steps, as described below. Firstly, we apply the single-phase collision operator according to the well-known BGK formalism [53] Ω k i (1) = − fi − f eq i (ρk,utot) τ , (28) in order to reproduce solutions of the Navier-Stokes equations.

28511#pg8>.

Pair Dynamics and Hydrodynamic Effects

For bubble pairs, the analysis uncovers additional clogging and unclogging pathways including hydrodynamic unclogging driven by pressure buildup in the interbubble film <ref:2603.28511#pg3>. The state space for pairs includes five distinct states: Clogging, Passage, Coalescence-induced clogging, Coalescence-induced unclogging, and Hydrodynamic unclogging <ref:2603. p. 0

Where the paper says it

Extending the study to bubble pairs, we uncover additional clogging and unclogging pathways, including hydrodynamic unclogging driven by pressure buildup in the interbubble film, and coalescence-induced clogging and unclogging. By mapping our results as functions of confinement ratio and Bond number, we define distinct dynamical regimes that control bubble passage.

28511#pg11>. Hydrodynamic unclogging occurs when the pressure behind the leading bubble increases as fluid is squeezed out of the interbubble gap <ref:2603. p. 2
Where the paper says it

Similarly, when the bubble offset ratio increases, the thickness of the lubrication layer increases as well. As a result, the amount of carrier fluid that needs to be squeezed out of the interbubble gap before possible coalescence also increases.

28511#pg14>.

Experimental Validation and Conclusion

X-ray radiographic measurements on bubble chains in open-porous nickel foam confirm the predicted clogging and unclogging mechanisms <ref:2603.28511#pg7>. The experimental results align with simulation predictions, showing that unclogging is rather due to hydrodynamic effects than coalescence-induced ones. p. 0

Where the paper says it

Extending the study to bubble pairs, we uncover additional clogging and unclogging pathways, including hydrodynamic unclogging driven by pressure buildup in the interbubble film, and coalescence-induced clogging and unclogging. By mapping our results as functions of confinement ratio and Bond number, we define distinct dynamical regimes that control bubble passage.

Overall, the work identifies key mechanisms governing bubble motion across pore-scale constrictions and establishes a dimensionless framework for predicting gas transport through highly porous media <ref:2603. p. 0
Where the paper says it

1, 91058 Erlangen, Germany Gas bubble transport through highly porous transport layers (PTLs) is a key process in electrochemical devices such as proton exchange membrane water electrolyzers, where bubbles generated at catalyst surfaces must migrate through complex porous networks. To understand this process, we focus on model systems, namely the motion of single, paired and multiple bubbles in capillaries and study these by combining analytical modeling, three-dimensional color-gradient lattice Boltzmann simulations, and X-ray radiography.

28511#pg17>.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Improved AI can predict whether a single bubble will pass or clog a constriction by calculating a critical Bond number Bocr using Equation (14). This allows for quantitative prediction of passage versus clogging based on the confinement ratio C.

  2. Improved AI can estimate the nominal passage time of a bubble through a constriction by using Equation (23) to calculate tp/t0, which is dependent on the difference between the Bond number and Bocr.

  3. Improved AI can predict if hydrodynamic unclogging will occur when two bubbles are present by calculating the offset Bond number BoB2 offset and comparing it to BoC2, as described in Equation (39).

  4. Improved AI can map complex state spaces for bubble pairs, distinguishing between states like Coalescence-induced clogging and Hydrodynamic unclogging based on confinement and offset Bond numbers.

Abstract

Gas bubble transport through highly porous transport layers (PTLs) is a key process in electrochemical devices such as proton exchange membrane water electrolyzers, where bubbles generated at catalyst surfaces must migrate through complex porous networks. To understand this process, we focus on model systems, namely the motion of single, paired and multiple bubbles in capillaries and study these by combining analytical modeling, three-dimensional color-gradient lattice Boltzmann simulations, and X-ray radiography. For single bubbles, we derive an analytical expression for the critical Bond number separating passage from clogging and show that, in the low deformation regime, it accurately predicts this transition in circular capillaries. Extending the study to bubble pairs, we uncover additional clogging and unclogging pathways, including hydrodynamic unclogging driven by pressure buildup in the interbubble film, and coalescence-induced clogging and unclogging. By mapping our results as functions of confinement ratio and Bond number, we define distinct dynamical regimes that control bubble passage. Experiments on bubble chains rising through highly porous nickel foams confirm the predicted clogging and unclogging mechanisms.

Related papers