A Novel Approach for Direct Measurement of the Stretch Factor in Laminar Premixed Hydrogen-Air Flames Affected by Thermodiffusive Instabilities

arXiv:2603.18852 · physics.flu-dyn · Submitted 2026-03-19 · Read on arXiv

physics.flu-dyn

Submitted: 2026-03-19

Updated: 2026-03-20

DOI: 10.1016/j.proci.2026.106086

License: http://creativecommons.org/licenses/by/4.0/

The gist: This study introduces a novel experimental configuration using OH-PLIF imaging to directly determine the stretch factor (I 0) in laminar premixed hydrogen flames transitioning from a quasi-stable to…

Terminology

Abstract

This study introduces a novel experimental configuration using OH-PLIF imaging to directly determine the stretch factor (I 0) in laminar premixed hydrogen flames transitioning from a quasi-stable to a thermodiffusively unstable regime. A rod-anchored V-flame is stabilised in a laminar premixed reactant flow. Near the anchoring rod, the mildly strained flame remains quasi-stable, exhibiting a smooth surface and a well-defined inclination angle (θ s) to the main flow. This stable branch is associated with a burning rate S s. Farther downstream, the flame abruptly transitions to a regime dominated by thermodiffusive (TD) instabilities, characterised by cellular structures and a wrinkled surface. The distance between this transition and the anchor decreases with increasing equivalence ratio. This TD-unstable branch exhibits a larger mean flame-surface angle (θ u), enabling direct determination of the flame-speed increase, S u/S s. It is assumed that this ratio represents the normalised flame consumption speed, S c/S L. Determination of I 0 additionally requires the increase in flame-surface area caused by the thermodiffusive instabilities. Three complementary methods are therefore used to evaluate the surface area of the TD-unstable branch (A) relative to a smooth reference area (A 0), yielding consistent trends in A/A 0 over the investigated equivalence-ratio range. The resulting I 0 values, with the main uncertainty arising from A, decrease monotonically with increasing equivalence ratio, from about 1.1--1.3 at ϕ=0.35 to 0.8--0.9 at ϕ=0.40, consistent with theoretical predictions. Additional numerical simulations in a reduced two-dimensional representation reproduce the same transition behaviour and yield qualitatively consistent results.

Related papers