Anharmonicity Driven by Vacancy Ordering Unlocks High-performance Thermoelectric Conversion in Defective Chalcopyrites II-III 2-VI 4
Listen
Radio episode about this paper
Transcript
Introduction to the show: ident: Condensed Matter. The day in condensed matter: materials, phases and the measurements under them.
Kai: We're looking at the paper: "Anharmonicity Driven by Vacancy Ordering Unlocks High-performance Thermoelectric Conversion in Defective Chalcopyrites II-III 2-VI 4".
Mira: Here's the gist of the paper. Defective chalcopyrites have recently emerged as promising thermoelectric materials because their ordered intrinsic vacancies can profoundly reshape both lattice dynamics and electronic structure Here, we present a comprehensive theoretical investigation of the lattice thermal and carrier transport properties of II-III2-VI4 defective chalcopyrites by combining first-principles calculations with machine-learning interatomic potentials.
Kai: Lattice Thermal Transport Suppression The study demonstrates that vacancy ordering enhances lattice distortion, leading to strong anharmonicity and metavalent bonding The interplay of soft low-frequency phonons, strongly negative Grüneisen parameters, and a substantially enlarged four-phonon scattering phase space results in four-phonon-scattering-dominated heat transport, yielding ultralow lattice thermal conductivity.
Mira: Specifically, for CdGa2Te4, the inclusion of 4ph scattering at 300 K reduces κL from 0.61 W·m−1K−1 to 0.19 W·m−1K−1, corresponding to a reduction of 68%.
Kai: This is because the inclusion of 4ph scattering leads to a 50–70% reduction in lattice thermal conductivity in defective chalcopyrites at 300 K.
Paper summary: Kai: So, we're looking at this paper today, "Anharmonicity Driven by Vacancy Ordering Unlocks High-performance Thermoelectric Conversion in Defective Chalcopyrites II-III two-VI four" <ref:2603.16477#pg1,Anharmonicity Driven by Vacancy Ordering Unlocks High-performance Thermoelectric Conversion in Defective>. This study is digging into defective chalcopyrites and what happens to their heat and electricity when you introduce these ordered vacancies.
Mira: Exactly. The main idea here is that these ordered vacancies don't just change the structure; they reshape both how the atoms vibrate, which we call lattice dynamics, and how electrons move through the material. It claims that this reshaping opens up a route to very low lattice thermal conductivity and better electrical transport at room temperature.
Lev: From an engineering standpoint, I’m interested in how much of this is structural versus what you can actually build reliably with these defects. The paper suggests vacancy ordering enhances lattice distortion and leads to strong anharmonicity, which means the vibrations become way more complex than just simple waves.
Kai: Right. And this enhanced anharmonicity, when combined with soft low-frequency phonons and a large phase space for four-phonon scattering, is supposed to drive heat transport down significantly. The paper shows that for cadmium gallate telluride, CdGa2Te4, the lattice thermal conductivity drops from zero point sixty-one watts per meter Kelvin to just zero point nineteen watts per meter Kelvin at room temperature.
Mira: That's a big drop, a sixty-eight percent reduction in lattice thermal conductivity for that specific material when you include four-phonon scattering. What the paper emphasizes is that this four-phonon scattering becomes the dominant heat transport mechanism in these defective chalcopyrites at room temperature.
Lev: I need to know how those numbers translate to real hardware. If we're talking about running this on actual chips, does that mean the phonon lifetimes are long enough for meaningful electronic properties, or are we fighting overwhelming scattering?
Kai: The paper also looks at tuning the electronic structure by substituting anions at the VI site. They found that making the anion less electronegative weakens how much it hybridizes with the metal atoms. This action shifts those anion p states upward and narrows the band gap, which directly improves electrical transport.
Paper summary: Mira: So, it’s a dual approach: you use vacancy ordering to suppress heat flow via phonon scattering, and you use anion substitution to tune the electronics to improve carrier movement simultaneously. That synergy is what they’re proposing as a design principle.
Lev: It sounds like a very specific set of conditions that need to be met perfectly for this synergy to work out in practice. What kind of modeling did they use for these predictions? Was it just theory, or were they using something closer to reality?
Kai: They combined first-principles calculations with machine learning interatomic potentials, or MLIPs. They used the Perdew-Burke-Ernzerhof revised for solids functional within the generalized gradient approximation, PBEsol.
Mira: And they validated those forces using moment tensor potentials and then trained deep potential models using that same data set. They even got pretty good agreement, with maximum rootmeansquare errors of zero point sixty-three electron volts for energies and zero point thirty-two electron volts per angstrom for forces.
Lev: That's solid validation for the interatomic potentials. But if you're using potentials to predict transport, what are the limitations there? How far away from the DFT data is this MLIP reliable when predicting something as complex as phonon transport?
Kai: They calculated lattice thermal conductivity using a linearized wigner transport equation framework, where they treat it as the sum of point P and constant C contributions. The total lattice thermal conductivity is given by kappa L equals kappa P plus kappa C.
Mira: And the results for CdGa2Te4 are really compelling: an ultralow lattice thermal conductivity of zero point nineteen watts per meter Kelvin, paired with a room temperature figure of zero point nine five seven for the thermoelectric figure of merit, or ZT.
Lev: ZT zero point nine five seven at room temperature is high, but what does that mean for actual device performance? Does that high value hold up when you factor in the scattering rates from the lattice itself?
Kai: The paper compares CdGa2Te4 against other materials like lead selenide and other chalcopyrites, whose ZT values are generally below zero point four five at room temperature. This shows that this specific material is performing significantly better than those established candidates under these conditions.
Paper summary: Mira: What's really important here, beyond just the numbers, is the practical design strategy they offer. They aren't just finding a material; they are proposing a way to build them by controlling vacancy ordering, increasing higher-order phonon scattering, and engineering the band gap via anion choice.
Lev: So if I were designing this from scratch for fabrication, I'd have to ensure the synthesis process actually gets that specific ordered vacancy structure right. That sounds like a tough hurdle for scaling up.
Kai: It is tough, but they found that this synergy between controlling the phonon side through vacancies and controlling the carrier side through anions is crucial for making high-performance chalcopyrite materials work better than what we currently have.
Mira: So, to wrap up this paper on "Anharmonicity Driven by Vacancy Ordering Unlocks High-performance Thermoelectric Conversion in Defective Chalcopyrites II-III two-VI four", the authors are pointing to ordered intrinsic vacancies as the core structural feature driving low lattice thermal conductivity through strong anharmonicity <ref:2603.16477#pg1,Anharmonicity Driven by Vacancy Ordering Unlocks High-performance Thermoelectric Conversion in Defective>.
Lev: And they show that this, combined with anion engineering, can lead to a material like CdGa2Te4 achieving a ZT of zero point nine five seven at room temperature, which is much higher than other chalcopyrite candidates.
Kai: The implication for me in the hardware world is that we might be able to design materials based on intrinsic structural features rather than just external doping to suppress heat flow. We move from adding defects to engineering the defect structure itself.
Mira: And for theory, it provides a clear roadmap: vacancy ordering and anion tuning are two coupled levers you can pull to optimize both phonon and electronic transport properties together.
Lev: The main thing I take away is that while the theory is strong, translating that precise ordered structure into a scalable material where you maintain those specific atomic arrangements is the next big challenge for realizing this potential.
Kai: And it sets a high bar for what we expect from future defective chalcopyrite research. We see these materials as a promising platform because of this inherent structural control they’ve shown.
Conclusion: Kai: So, we're wrapping up this look at "Anharmonicity Driven by Vacancy Ordering Unlocks High-performance Thermoelectric Conversion in Defective Chalcopyrites II-III two-VI four."
Mira: The authors are focusing on how you can actually tune the crystal structure using defects to get better heat and electricity performance.
Lev: It sounds like they’ve found a way to use vacancy ordering not just as a structural quirk, but as the main reason why these materials have such low lattice thermal conductivity.
Kai: Exactly. They're showing how that ordered arrangement causes strong anharmonicity, which means the vibrations in the material become much more complex than simple waves we usually model.
Mira: And they link that complexity to higher order phonon scattering, which is what actually suppresses heat flow at room temperature for materials like cadmium gallate telluride.
Lev: So, it’s about using a specific structural motif—the vacancy ordering—to amplify the way the atoms vibrate in a way that stops heat from moving through them efficiently.
Kai: Right. And on top of that, they show how tuning the anion at a specific site can simultaneously improve electrical transport by narrowing the band gap.
Mira: It’s a two-pronged approach, controlling both how fast heat moves and how fast charge carriers move in tandem with that vacancy ordering structure.
Lev: From an engineering view, what this means for us is that instead of just adding random impurities hoping to scatter phonons, we might be able to engineer the defect pattern itself for better results.
Kai: It’s about using intrinsic structural features rather than just external doping to suppress heat flow in these chalcopyrite systems.
Mira: And they've identified cadmium gallate telluride as a prime candidate because it hits that sweet spot with an ultralow thermal conductivity and a high room temperature figure of merit.
Lev: That ZT value, zero point nine five seven at room temperature, is what makes this whole paper so interesting for real hardware applications.
Kai: It’s a big jump when you compare that to the other chalcopyrite materials they looked at, like lead selenide or AgSbTe2.
Mira: So the main conclusion is that ordered intrinsic vacancies are the key structural motif driving high performance in these defective chalcopyrites.
Lev: Now we need to look at how this specific ordering gets into a real synthesis process because that’s where the hard work begins.
Hui Zhang, Jincheng Yue, Jiongzhi Zheng, Ning Wang, Wenling Ren, Shuyao Lin, Chen Shen, Hao Gao, ÁYanhui Liu, Áue-Wen Fang, ÁTian Cui
Institute of High-Pressure Physics, Ningbo University · Fisika Aplikatua Saila, Gipuzkoako Ingeniaritza Eskola, University of the Basque Country (UPV/EHU) · Centro de Fósica de Materiales (CFM-MPC), CSIC-UPV/EHU · Energy Technologies Area, Lawrence Berkeley National Laboratory · Thayer School of Engineering, Dartmouth College · Institute of Materials Science, Technical University of Darmstadt · Technische Universität Wien, Institute of Materials Science and Technology, Vienna · Linköoping University
cond-mat.mtrl-sci
Submitted: 2026-03-17
Updated: 2026-11-08
License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/
Importance score: 97/100
The gist: Defective chalcopyrites have recently emerged as promising thermoelectric materials because their ordered intrinsic vacancies can profoundly reshape both lattice dynamics and electronic structure…
Key concepts
- Vacancy Ordering
- Ordered intrinsic vacancies are a key structural feature in defective chalcopyrites. These vacancies lower the crystal symmetry and cause significant local lattice distortion, which is the primary driver for strong lattice anharmonicity and metavalent bonding. This structural change is crucial for suppressing heat transport.
- Lattice Thermal Transport Suppression
- The study shows that vacancy ordering enhances four-phonon scattering, making it a dominant mechanism for heat resistance. This leads to ultralow lattice thermal conductivity ($\kappa_L$), which is significantly reduced when including four-phonon processes compared to just three-phonon processes.
- Anion Substitution Tuning
- Substituting the VI-site anion allows for electronic structure tuning. Decreasing the anion's electronegativity weakens metal-anion hybridization and shifts its p states upward, effectively narrowing the band gap. This modification improves carrier transport properties, which is essential for high thermoelectric performance.
Terminology
Summary
Defective chalcopyrites have recently emerged as promising thermoelectric materials because their ordered intrinsic vacancies can profoundly reshape both lattice dynamics and electronic structure Here, we present a comprehensive theoretical investigation of the lattice thermal and carrier transport properties of II-III2-VI4 defective chalcopyrites by combining first-principles calculations with machine-learning interatomic potentials. p. 1 p. 1
Lattice Thermal Transport Suppression
The study demonstrates that vacancy ordering enhances lattice distortion, leading to strong anharmonicity and metavalent bonding The interplay of soft low-frequency phonons, strongly negative Grüneisen parameters, and a substantially enlarged four-phonon scattering phase space results in four-phonon-scattering-dominated heat transport, yielding ultralow lattice thermal conductivity. Specifically, for CdGa2Te4, the inclusion of 4ph scattering at 300 K reduces κL from 0. p. 961 W·m−1K−1 to 0.19 W·m−1K−1, corresponding to a reduction of 68%. p. 9 p. 9 This is because the inclusion of 4ph scattering leads to a 50–70% reduction in lattice thermal conductivity in defective chalcopyrites at 300 K. p. 9
Electronic Structure Tuning via Anion Substitution
Systematic anion substitution at the VI-site provides an effective route to tune the electronic structure As the electronegativity of the VI-site anion decreases, weakened orbital hybridization and the upward shift of anion p states cooperatively narrow the band gap and improve electrical transport. This effect is observed in CdGa2Te4, which exhibits an ultralow lattice thermal conductivity of 0. p. 119 W·m−1K−1 and a high room-temperature ZT of 0. p. 1 p. 1957.
Computational Methodology
The computational framework employed combines Density Functional Theory (DFT) calculations with machine-learning interatomic potentials (MLIPs).
-
Density functional theory calculations used the Perdew-Burke-Ernzerhof revised for solids (PBEsol) functional within the generalized gradient approximation (GGA). p. 4
-
Moment tensor potentials (MTPs) were used to evaluate interatomic forces, and they closely match the DFT calculations, yielding maximum rootmean-square errors (RMSE) of 0. p. 5063 eV for energies and 0. p. 5032 eV·˚A−1 for forces. p. 5
-
Deep potential (DP) models were constructed and trained using the same training data as MTPs, indicating a good agreement between DP predictions and DFT calculations with RMSE less than 0. p. 5057 eV and 0. p. 5029 eV·˚A−1 for energies and forces. p. 5
-
Lattice thermal conductivity was calculated within the linearized Wigner transport equation (LWTE) framework, where the total lattice thermal conductivity is given as κL = κP + κC. p. 6
Synergistic Design Principle
The work provides a practical design strategy by integrating vacancy ordering, higher-order phonon scattering, and anion-dependent band engineering. The findings clarify the coupled roles of vacancy ordering and anion engineering in regulating phonon and carrier transport. p. 3 This synergy is crucial for developing next-generation high-performance chalcopyrite-based thermoelectric materials. p. 2
Performance Comparison
CdGa2Te4 emerges as the best-performing member of this family, combining an ultralow lattice thermal conductivity of 0.19 W·m−1K−1 with a room-temperature ZT of 0. p. 1957. This value drastically outperforms other candidate materials such as the widely studied PbSe [70] and chalcopyrites (e. p. 1g., AgSbTe2 [67] and TlSbTe2 [68]), whose ZT values generally fall below 0. p. 4 p. 445 at 300 K. p. 4 p. 4 The significant performance improvement demonstrates that defective chalcopyrites with intrinsic vacancies, particularly CdGa2Te4, exhibit immense potential as high-performance thermoelectric materials. p. 2 p. 2
Conclusion
Ordered intrinsic vacancies are identified as the central structural motif responsible for their exceptional lattice thermal transport behavior. By further lowering crystal symmetry and amplifying local lattice distortion, vacancy ordering induces pronounced lattice anharmonicity, promotes metavalent bonding, and strengthens higher-order phonon interactions. p. 3 Together with soft lowfrequency phonons, strongly negative Grüneisen parameters, and reduced phonon group velocities, these effects make four-phonon scattering a dominant heat-resistance mechanism and drive the lattice thermal conductivity to ultralow values. p. 1 At the same time, the VI-site anion serves as an effective electronic approach: decreasing anion electronegativity elongates metal-anion bonds, weakens orbital hybridization, shifts anion p states upward, and narrows the band gap, thereby enhancing carrier transport. p. 1 Owing to this synergistic optimization of phonon and electronic properties, CdGa2Te4 is identified as the optimal candidate in terms of overall thermoelectric performance. p. 1 Beyond identifying this high-performance thermoelectric compound, this work integrates vacancy ordering and anion engineering as a unified design principle for developing next-generation thermoelectric materials based on defective chalcopyrite frameworks. p. 1
--- Page 1 ---
Anharmonicity Driven by Vacancy Ordering Unlocks High-performance Thermoelectric Conversion in Defective Chalcopyrites II-III2-VI4 Hui Zhang, Jincheng Yue, Jiongzhi Zheng, Ning Wang, Wenling Ren, Shuyao Lin, Chen Shen, Hao Gao, Yanhui Liu, Yue-Wen Fang, Tian Cui 1 Institute of High-Pressure Physics
--- Page 2 ---
Abstract Defective chalcopyrites have recently emerged as promising thermoelectric materials because their ordered intrinsic vacancies can profoundly reshape both lattice dynamics and electronic structure. Here, we present a comprehensive theoretical investigation of the lattice thermal and carrier transport properties of II-III2-VI4 defective chalcopyrites by combining first-principles calculations with machine-learning interatomic potentials. We show that vacancy ordering enhances lattice distortion, leading to strong anharmonicity and metavalent bonding. p. 1 The interplay of soft low-frequency phonons, strongly negative Grüneisen parameters, and a substantially enlarged fourphonon scattering phase space results in four-phonon-scattering-dominated heat transport, yielding ultralow lattice thermal conductivity. p. 1 Meanwhile, systematic anion substitution at the VI-site provides an effective route to tune the electronic structure: reduced anion electronegativity weakens metal-anion hybridization, shifts anion p states upward, narrows the band gap, and thereby improves electrical transport. p. 1 CdGa2Te4 exhibits an ultralow lattice thermal conductivity of 0. p. 119 W·m−1K−1 and a high room-temperature ZT of 0.957. This work not only predicts defective chalcopyrites as a promising platform for high-performance thermoelectrics but also provides a practical design strategy by integrating vacancy ordering, higher-order phonon scattering, and anion-dependent band engineering. p. 1
--- Page 3 ---
I. INTRODUCTION Diamond-like compounds have emerged as a research hotspot in the field of thermoelectric materials due to their tetrahedrally coordinated crystal structures that can be traced back to binary zinc blende or wurtzite frameworks [1–7] frameworks. p. 1 Among them, representative systems with chalcopyrite (I-III-VI2) have been widely investigated as well-known latticedistorted thermoelectric materials [8–13]. p. 1 Their inherent lattice distortion induces strong lattice anharmonicity [14, 15] and gives rise to ultralow lattice thermal conductivity (κL) that is a crucial foundation for high-performance thermoelectric materials [16, 17]. p. 1
--- Page 4 ---
Compared to traditional strategies that rely on external doping to introduce point defects for phonon scattering, intrinsic distortion achieves effective suppression of lattice thermal transport through the inherent characteristics of the crystal structure [26]. Defective chalcopyrites (II-III2-VI4) typically crystallize an ordered vacancy structure derived from the evolution of the chalcopyrite structure, achieved by doubling the original formula unit and removing one group-I atom, thereby creating vacancies at the original group-I atomic sites [25]. p. 2 Lowsymmetry thermoelectric materials typically feature low κL due to structure complexity. p. 2
--- Page 5 ---
In this work, we carry out a comprehensive investigation of the thermoelectric properties of defective chalcopyrites II-III2-VI4 by combining first-principles calculations with machine-learning interatomic potentials (MLIPs). We show that intrinsic vacancy ordering is not merely a crystallographic feature, but a key structural origin of the strong lattice anharmonicity in these materials. p. 3 p. 3 The vacancy-induced symmetry lowering and local lattice distortion foster metavalent bonding and soften low-frequency phonons, which collectively enhance higher-order phonon interactions. p. 3 p. 3
--- Page 8 ---
In this work, we carry out a comprehensive investigation of the thermoelectric properties of defective chalcopyrites II-III2-VI4 by combining first-principles calculations with machine-learning interatomic potentials (MLIPs). We show that intrinsic vacancy ordering is not merely a crystallographic feature, but a key structural origin of the strong lattice anharmonicity in these materials. The vacancy-induced symmetry lowering and local lattice distortion foster metavalent bonding and soften low-frequency phonons, which collectively enhance higher-order phonon interactions.
--- Page 9 ---
The color scale represents the κL To calculate the relative reduction in the κL, subtract κ3,4phL from κ3phL, then divide by the latter and multiply by 100%.
--- Page 10 ---
As shown in FIG. 1(b), the relationship between the η and the κL of different compounds This trend clearly demonstrates that κL is strongly suppressed as η increases because of the enhanced lattice anharmonicity. p. 8
--- Page 11 ---
Chalcopyrites inherently feature pronounced phonon scattering driven by tetrahedral distortion, making higher-order processes indispensable for an accurate description [10, 16]. Indeed, in CuInTe2, the incorporation of 4ph scattering results in a substantial reduction of κL by 54. p. 96% at 800 K [54]. Our results reveal that the inclusion of 4ph scattering leads to a 50–70% reduction in lattice thermal conductivity in defective chalcopyrites at 300 K. p. 9
--- Page 12 ---
As shown in FIG. 1(c), the κL evaluated by including both 3ph and 4ph scattering processes (κ3,4phL) and by accounting for only 3ph scattering processes (κ3phL). p. 9 For CdGa2Te4, the inclusion of 4ph scattering at 300 K reduces κL from 0. p. 961 W·m−1K−1 (with only 3ph scattering) to 0. p. 619 W·m−1K−1, corresponding to a reduction of 68%.
--- Page 20 ---
FIGs. 4(d) and (e) present the evolution of ZT with carrier concentration for CdGa2Te4 and ZnGa2S4 at 300 K to evaluate the influence of 4ph scattering by comparing the results under two scenarios: one considering only 3ph scattering (ZT3ph) and another incorporating both 3ph and 4ph scattering (ZT3,4ph). p. 6 p. 6 CdGa2Te4 shows a dramatic rise in value from 0. p. 1 p. 1416 to 0.957, corresponding to a ∼2. p. 4 p. 44 times increase, whereas ZnGa2S4 exhibits only a modest increase from 0. p. 5 p. 5041 to 0.073, marking a ∼1.8 times enhancement.
--- Page 21 ---
Benefiting from an ultralow κL and a high PF, CdGa2Te4 exhibits excellent thermoelectric potential at 300 K. Its ZT3ph already reaches 0.416, being ten times larger than that of ZnGa2S4 (0. p. 8041). The inclusion of 4ph scattering enhances ZT for both materials, although the magnitude of the enhancement differs. p. 1 CdGa2Te4 shows a dramatic rise in value from 0.416 to 0.957, corresponding to a ∼2.4 times increase, whereas ZnGa2S4 exhibits only a modest increase from 0.041 to 0.073, marking a ∼1.8 times enhancement.
--- Page 22 ---
FIGs. 4(d) and (e) present the evolution of ZT with carrier concentration for CdGa2Te4 and ZnGa2S4 at 300 K to evaluate the influence of 4ph scattering by comparing the results under two scenarios: one considering only 3ph scattering (ZT3ph) and another incorporating both 3ph and 4ph scattering (ZT3,4ph).
--- Page 29 ---
Finally, we compared the ZT of CdGa2Te4 with those of several representative thermoelectric materials at 300 K, where the specific compounds corresponding to the labels are detailed in Refs. [65–68]. As illustrated in FIG. p. 6 4(f), CdGa2Te4 achieves an outstanding ZT of 0. p. 2957. This value drastically outperforms the other candidate materials such as the widely studied PbSe [70] and chalcopyrites (e. p. 1g., AgSbTe2 [67] and TlSbTe2 [68]), whose ZT values generally fall below 0.45 at 300 K. The significant performance improvement demonstrates that defective chalcopyrites with intrinsic vacancies, particularly CdGa2Te4, exhibit immense potential as high-performance thermoelectric materials.
--- Page 15 ---
FIG. 2(a) Phonon dispersions in the frequency range of 0–4 THz Along the Γ-M direction, the red line represents the linear fit to the acoustic branch, with its slope corresponding to the phonon group velocity. In CdGa2Te4, the fitted slope for ZnGa2S4 is 2. p. 104, which is substantially larger than the value of 0. p. 161 obtained for CdGa2Te4, implying a higher acoustic phonon group velocity in ZnGa2S4. p. 6
--- Page 15 ---
In contrast, ZnGa2S4 displays broader DOS features arising from the collective contributions of Zn, Ga, and S. Furthermore, we plotted the Grüneisen parameter for CdGa2Te4 and ZnGa2S4 in FIG. p. 1 2(c). Within the 0–2 THz range, the Grüneisen parameter of ZnGa2S4 stays close to zero and only reaches a mildly negative value of about –1.6, showing no pronounced peak and thus indicating relatively weak anharmonicity. p. 8 On the other hand, a strongly negative Grüneisen parameter appears in CdGa2Te4 over the same frequency window, with a pronounced minimum of around –10. p. 1
--- Page 15 ---
This large negative value suggests that the presence of heavy atoms is closely linked to strong lattice anharmonicity, which in turn promotes enhanced higher-order phonon–phonon scattering.
--- Page 15 ---
In combination with its lower phonon group velocity, this leads to a stronger suppression of lattice thermal transport in CdGa2Te4 than in ZnGa2S4.
--- Page 15 ---
The spectral heat-carrying contributions associated with 4ph and 3ph scattering show little overlap in this interval, which indicates that low-frequency heat transport is largely controlled by 4ph scattering.
--- Page 15 ---
By contrast, although 4ph scattering in ZnGa2S4 also decreases κL to some extent especially in 1–3 THz, its overall impact is weaker than in CdGa2Te4. The spectral/cumulative lattice thermal conductivity at 300 K is calculated with and without 4ph scattering for comparison. p. 6
--- Page 15 ---
For CdGa2Te4, the reduction of κL caused by 4ph scattering is mainly located in 0–1.5 THz.
--- Page 15 ---
By contrast, although 4ph scattering in ZnGa2S4 also decreases κL to some extent especially in 1–3 THz, its overall impact is weaker than in CdGa2Te4.
--- Page 15 ---
The spectral/cumulative lattice thermal conductivity at 300 K is calculated with and without 4ph scattering for comparison.
Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.
Improvements for AI systems
-
Anharmonicity Driven by Vacancy Ordering Unlocks: The improved AI system can predict ultralow lattice thermal conductivity by modeling how vacancy ordering enhances lattice distortion and leads to strong anharmonicity, which is shown to result in four-phonon scattering dominating heat transport.
-
Anion-Regulated Electronic Tuning: The system can tune electronic structure properties like band gap narrowing by systematically varying anion electronegativity, allowing it to predict optimal material compositions for improved electrical transport based on the
anion-dependent electronic trend
described in the paper. -
Coupled Design Strategy Generation: The improved AI can act as a design tool by integrating vacancy ordering and anion engineering, providing a practical strategy for developing next-generation materials by coupling phonon suppression with electronic optimization.
Related papers
- Structural contribution to light-induced gap suppression in Ta 2 NiSe 5
- Anatomy of fast current-induced skyrmion motion in synthetic antiferromagnets
- Magnetic control of an exciton-polariton condensate in a van der Waals magnet
- High-pressure elastic properties of GeO2 polymorphs up to 120 GPa
- Decoupling Strain-Rate Sensitivity and Deformation Length Scale Effects in Neutron-Irradiated Tungsten: A Coupled Nano-Indentation, HR-EBSD and Crystal Plasticity Study
- Magnetism modulation in Co3Sn2S2 by current-assisted domain wall motion