Universal Hamiltonian control in a planar trimon circuit
Listen
Radio episode about this paper
Transcript
Introduction to the show: ident: Quantum Radio. Generated commentary on the latest quantum physics and condensed matter papers.
Kai: We're looking at the paper: "Universal Hamiltonian control in a planar trimon circuit".
Paper summary: Kai: So we're looking at this paper now "Universal Hamiltonian control in a planar trimon circuit", and what they're claiming is that this compact device could replace transmons in standard superconducting processor architectures because it has three transmon-like modes with strong all-to-all ZZ coupling <ref:2603.04566#pg1>.
Mira: Right, it’s about this trimon circuit and how you can do universal Hamiltonian control on it by using those strong couplings between the modes <ref:2603.04566#pg1>. The main thesis here is that this setup allows for flexible control over its rich state space <ref:2603.04566#pg1>.
Lev: From an engineering standpoint, what's interesting is that they show high fidelity operations on the trimon, achieving fidelities exceeding ninety-nine point nine percent for native three-qubit conditional rotation gates <ref:2603.04566#pg2>. That level of fidelity is what we need to actually run meaningful error correction <ref:2603.04566#pg2>.
Kai: So, they are demonstrating this universal control using simultaneous pulses applied through a single drive line for fast single and two-qubit control <ref:2603.04566#pg1>. What does that mean for the hardware?
Mira: It means they’ve figured out how to use the inherent inter-mode dispersive couplings to perform those three-qubit conditional rotation gates <ref:2603.04566#pg1>. They also showed that you can get high fidelity square root iSWAP and square root i bSWAP gates in a two-qubit subspace using second order stimulated Raman transitions <ref:2603.04566#pg2>.
Lev: That’s solid because it shows they can implement Hamiltonian terms that span the fifteen-dimensional traceless two-qubit operator space, which means they can generate any two-qubit operation you want using just one shaped envelope of frequency components <ref:2603.04566#pg2>.
Kai: That sounds like a big deal for circuit design because it suggests you don't need three separate drive lines for every interaction <ref:2603.04566#pg1>. But what about the underlying physics?
Mira: The simplified Hamiltonian they use describes purely longitudinal, or dispersive, energy shifts and doesn't induce excitation exchange between the modes in that basic model <ref:2603.04566#pg1>. However, the cross-Kerr shift per excitation between qubit modes is on the order of a few hundred megahertz <ref:2603.04566#pg1>.
Lev: That frequency scale gives you a sense of how fast these interactions are happening, which is important for designing control pulse shapes <ref:2603.04566#pg1>. They also mention that the transition energy of each qubit depends on the occupation number of the other two qubits, given by omega A n B n C equals omega A minus beta A plus minus one n B JAB minus one n C JCA <ref:2603.04566#pg3>.
Kai: So, moving beyond just the basic gates, what else does this trimon platform offer besides the two-qubit operations we already discussed?
Mira: Beyond multi-qubit gates, they show how to use this device as a qudit with up to eight states and higher coherence than typical transmon implementations <ref:2603.04566#pg2>. They can even implement single axis dynamical decoupling sequences on qutrit, ququart, six-level subspaces, and eight-level subspaces <ref:2603.04566#pg2>.
Paper summary: Lev: That's where the complexity lands for real hardware; implementing those dynamical decoupling sequences on a qud8 subspace is definitely going to add some overhead to your control sequence design <ref:2603.04566#pg2>. It shows you can use this structure for error suppression by encoding in a decoherence-free subspace that’s insensitive to common-mode noise <ref:2603.04566#pg1>.
Kai: That idea of correlated decoherence due to shared circuit elements sounds like it could be a real advantage for scaling up <ref:2603.04566#pg1>. But what about the practical constraints, like reading out the state?
Mira: They restrict readout to two qubits at a time because the resonator responses don't uniquely distinguish all eight computational states in a single shot <ref:2603.04566#pg1>. This limitation comes from the fact that the three qubits have nearly-equal dispersive shifts on each resonator, making it hard to separate states with the same number of excitations <ref:2603.04566#pg1>.
Lev: That readout constraint means you can’t read out a full qudit state in one go, which is a practical hurdle for high-level error correction <ref:2603.04566#pg1>. They use a Support Vector Classifier algorithm to define the boundaries between those excitation subspaces for the readout <ref:2603.04566#pg1>.
Kai: So, we have this high-fidelity control mechanism, and we know how it reads out states, but what about fixing errors in practice? How do they calibrate and mitigate them?
Mira: Gate calibration uses the deterministic benchmarking procedure to prepare an even superposition of the two states or spaces the gate rotates between <ref:2603.04566#pg2>. Then they use randomized benchmarking experiments to benchmark those gates against incoherent errors <ref:2603.04566#pg2>.
Lev: To further mitigate state fidelities, they use SPAM mitigation with calibration data from preparing reference states using conditional controlled-phase rotation gates <ref:2603.04566#pg2>. And they showed you can synthesize Hamiltonians spanning the two-qubit operator space using just one shaped envelope of one to a few frequency components <ref:2603.04566#pg2>.
Kai: Those Raman gate fidelities are impressive, right? They report an excitation-conserving square root iSWAP gate fidelity of ninety-nine point one nine percent and a double-excitation square root i bSWAP gate fidelity of ninety-nine point five nine percent <ref:2603.04566#pg2>.
Mira: Those Raman gates can actually be improved using techniques like stimulated Raman adiabatic passage or optimal control methods <ref:2603.04566#pg2>. And they corrected those state fidelities using REM and MLE SPAM corrections <ref:2603.04566#pg2>.
Lev: The paper also touches on the theoretical framework, showing the Lagrangian of the system in terms of number operator n mu taking the form H equals X summed over mu A B C omega A n B n C minus Jmu two mu minus two X summed over mu nu Jmu nu n mu n nu <ref:2603.04566#pg3>. This shows how the transition energy of each qubit depends on the occupation number of the other two qubits <ref:2603.04566#pg3>.
Paper summary: Kai: So, what are the physical parameters they measured for this device? I want to know if these are realistic numbers for a chip <ref:2603.04566#pg3>.
Mira: They report mode frequencies for A B and C at four point six nine one gigahertz five point one nine five gigahertz and five point nine five seven gigahertz respectively, and the measured transition energies are four point seven zero nine, five point one seven four, and five point nine four zero <ref:2603.04566#pg3>.
Lev: The experimental setup involved minimizing noise with various attenuators and filters on the drive line, including a fifty-five decibel fixed attenuation to cut ambient fridge noise <ref:2603.04566#pg3>. They also used a high electron mobility transistor low-noise amplifier at four kelvin and a traveling wave parametric amplifier at milliKelvin temperatures <ref:2603.04566#pg3>.
Kai: It sounds like they built it, cooled it down to milliKelvin temperatures, and measured these parameters <ref:2603.04566#pg3>. But what are the next steps for this circuit? Where does the research go from here?
Mira: Their future work involves further calibrating additional two-tone Raman transitions to expand the set of directly accessible three-qubit interactions <ref:2603.04566#pg3>. This could enable them to synthesize a broader class of three-qubit Hamiltonians using just a small number of simultaneous frequency components in one shaped envelope <ref:2603.04566#pg3>.
Lev: And they also plan to optimize the design and fabrication to get coherence comparable to a transmon fabricated with the same process <ref:2603.04566#pg1>. They also emphasize that coupling trimons together is necessary if they want to use them in a scalable architecture <ref:2603.04566#pg1>.
Kai: So, the ultimate vision here seems to be using this trimon as a viable alternative platform for superconducting quantum processors because of how compact and controllable it is <ref:2603.04566#pg1>.
Mira: Exactly. The main point of "Universal Hamiltonian control in a planar trimon circuit" is that this device offers three transmon-like modes with strong all-to-all ZZ coupling, enabling native three-qubit conditional rotation gates with fidelities over ninety-nine point nine percent <ref:2603.04566#pg1>.
Lev: It’s a compact, planar device that reduces wiring complexity by addressing those three trimon modes with a single charge drive line, which is an advantage over typical transmons requiring three independent lines <ref:2603.04566#pg1>. That reduction in wiring is something engineers really care about for scaling up hardware <ref:2603.04566#pg1>.
Kai: So, to sum up, the trimon provides a compact, planar circuit where those three modes can function as either three transmon-like qubits or a single collective qudit <ref:2603.04566#pg1>. The strong cross-Kerr couplings allow for high fidelity operations and flexible multi-qubit control <ref:2603.04566#pg1>.
Mira: It's a platform that enables high fidelity, flexible multi-qubit and qudit control in a compact circuit, and the trimon may be a viable alternative platform for superconducting quantum processors <ref:2603.04566#pg1>.
Conclusion: Kai: So we’ve been looking at this paper on universal Hamiltonian control in a planar trimon circuit and what it means for superconducting hardware generally.
Mira: It shows this compact device, these three transmon-like modes, can actually replace transmons in standard processor architectures because of how well they handle those couplings.
Lev: It's about getting flexible control over the rich state space of this trimon by using its strong all-to-all coupling between the modes.
Kai: The authors are showing high fidelity operations on these three modes, exceeding ninety-nine point nine percent for native three qubit conditional rotation gates.
Mira: That level of fidelity is what you need to actually run meaningful error correction schemes on real hardware.
Lev: They do this by using simultaneous pulses through just one drive line for fast single and two qubit control, which cuts down on the wiring complexity a lot compared to standard transmons that need three separate drive lines.
Kai: So, they’re demonstrating this universal control capability in a compact circuit where the modes can either work as three qubits or as a single collective qudit.
Mira: That's the core idea, using those strong cross-kerr couplings to get high fidelity gates and flexible multi qubit control in a small package.
Lev: It’s an important piece of hardware because it shows how you can reduce wiring complexity while keeping the gate fidelities high enough to actually run some kind of quantum computer.
Kai: But there are still limitations, like the readout only working on two qubits at a time, so they can't read out all eight states in a single shot.
Mira: That limitation is because the three qubits have nearly equal dispersive shifts on each resonator, making it hard to tell states with the same number of excitations apart.
Lev: They use a support vector classifier algorithm to define those boundaries for the readout, which means you can’t just take a single measurement and know everything.
Kai: The authors are also talking about how they can encode in a decoherence-free subspace to suppress noise from shared circuit elements.
Mira: That's an interesting idea because correlated decoherence from those shared elements could lead to efficient error suppression if you use the right encoding.
Lev: The dominant remaining error channel they expect is erasure, which means the paper points toward new types of error correction schemes tailored specifically for that type of noise.
Vivek Maurya, Daria Kowsari, Kumar Saurav, S.A. Shanto, R. Vijay, Daniel A. Lidar, Eli M. Levenson-Falk
Center for Quantum Information Science and Technology, University of Southern California · Department of Physics & Astronomy, University of Southern California, Los Angeles · Ming Hsieh Department of Electrical & Computer Engineering, University of Southern California, Los Angeles · Department of Condensed Matter Physics and Materials Science, Tata Institute of Fundamental Research · Department of Chemistry, University of Southern California
quant-ph
Submitted: 2026-03-04
Updated: 2026-11-18
Comments: 7 pages, 5 figures
Journal ref: Phys. Rev. Applied 26, 054049 (2026)
DOI: 10.1103/hxdq-dnz8
License: http://creativecommons.org/licenses/by/4.0/
The gist: Universal Hamiltonian control in a planar trimon circuit demonstrates that this compact device can potentially replace transmons in standard superconducting processor architectures.
Key concepts
- Trimon Circuit
- A compact superconducting circuit consisting of four Josephson junctions arranged in a ring with capacitance between all nodes and ground. It features three transmon-like modes that interact strongly, allowing for sophisticated control over their combined quantum states.
- Hamiltonian
- The mathematical description of the system's energy and interactions. For the trimon, it describes how the energy levels of the three modes shift based on each other's occupation numbers due to strong cross-Kerr couplings, which are crucial for implementing multi-qubit gates.
- Conditional Rotation Gates (CCR)
- A specific type of three-qubit gate natively supported by the trimon architecture. These gates utilize the strong inter-mode dispersive couplings to perform high-fidelity operations on the three modes simultaneously, enabling complex quantum logic.
- Qudit Functionality
- The ability of the trimon to function as a single system with up to eight states, rather than just three qubits. This versatility allows for implementing dynamical decoupling sequences and potentially achieving higher coherence in error-prone environments.
Terminology
Summary
Universal Hamiltonian control in a planar trimon circuit demonstrates that this compact device can potentially replace transmons in standard superconducting processor architectures. p. 0 Our results show a compact, highly controllable device
that can potentially replace transmons in standard superconducting processor architectures. INTRODUCTION
Achieving precise and versatile multi-qubit control is
essential for quantum simulation and computation, both
of which necessitate the ability to implement a wide range
of Hamiltonian interactions—a requirement made all the
more pressing in the NISQ era, where gate fidelities and
circuit depths remain constrained. The trimon features three transmon-like modes with strong all-to-all ZZ coupling. We demonstrate
high fidelity operations on the trimon, achieving flexible control of its rich state space.Where the paper says it
Where the paper says it
Device Architecture and Hamiltonian
The trimon consists of a ring of four Josephson junctions with capacitance between all circuit nodes and to ground. The simplified Hamiltonian for a trimon can be expressed as H = X sum µ=A,B,C ωµˆµ − Jµˆ2 µ − 2X sum µ>ν Jµνnˆµnˆν. p. 1 DEVICE DESCRIPTION
The trimon consists of a ring of four Josephson junctions with capacitance between all circuit nodes and to
ground. The simplified Hamiltonian for a trimon can be
expressed as
H =
X
µ=A,B,C
ωµnˆµ − Jµnˆ
2
µ
− 2
X
µ>ν
Jµνnˆµnˆν (1)
where ˆnµ is the excitation number operator, ωµ is a
mode frequency parameter (so that in this convention the
|0⟩→ |1⟩ transition frequency of mode µ, with the other
modes unexcited, is ωµ − Jµ), −2Jµ is its anharmonicity, and −2Jµν is the cross-Kerr (dispersive) shift per
excitation between qubit modes µ and ν (see Appendix
A for a derivation of this effective Hamiltonian). Because the interaction is diagonal in the excitation-number
basis (i. , it commutes with the uncoupled number operators), it produces purely longitudinal (dispersive) energy shifts and does not induce excitation exchange or
hybridize the eigenstates in this simplified model. DEVICE DESCRIPTION
The trimon consists of a ring of four Josephson junctions with capacitance between all circuit nodes and to
ground. The simplified Hamiltonian for a trimon can be
expressed as
H =
X
µ=A,B,C
ωµnˆµ − Jµnˆ
2
µ
− 2
X
µ>ν
Jµνnˆµnˆν (1)
where ˆnµ is the excitation number operator, ωµ is a
mode frequency parameter (so that in this convention the
|0⟩→ |1⟩ transition frequency of mode µ, with the other
modes unexcited, is ωµ − Jµ), −2Jµ is its anharmonicity, and −2Jµν is the cross-Kerr (dispersive) shift per
excitation between qubit modes µ and ν (see Appendix
A for a derivation of this effective Hamiltonian).Where the paper says it
Where the paper says it
Where the paper says it
Gate Implementation Capabilities
The trimon architecture natively supports three-qubit conditional rotation CCR(θ, ϕ) gates due to strong inter-mode dispersive couplings. The authors demonstrate that it is straightforward to implement complete control of the trimon, performing fast single- and two-qubit control using simultaneous pulses applied through the drive line. p. 0 This architecture natively supports three-qubit conditional rotation CCR(θ, ϕ) gates due to strong inter-mode dispersive couplings. We demonstrate that it is straightforward
to implement complete control of the trimon, performing fast single- and two-qubit control using simultaneous
pulses applied through the drive line. We also demonstrate gates mediated by second order stimulated Raman transitions [27–30]. We use these Raman transitions
to perform high-fidelity √
iSWAP (excitation-conserving)
arXiv:2603.Where the paper says it
Where the paper says it
Control Synthesis and Qudit Functionality
The control can implement Hamiltonian terms that span the 15-dimensional traceless two-qubit operator space (equivalently, the 15 non-identity two-qubit Pauli products). Beyond multi-qubit gates, the device is versatile by being used as a qudit with up to 8 states and higher coherence than typical transmon-based implementations. p. 0 Through multi-tone
driving we are able to implement all 16 two-qubit Pauli operators in the two-qubit space. We
further demonstrate using the trimon as a qudit with up to 8 states and higher coherence than
typical transmon-based implementations. Beyond multi-qubit gates, we demonstrate the versatility of this platform by using it as a
qudit. We show high-fidelity control by implementing
single axis dynamical decoupling sequences on qutrit,
ququart, six-level (qud6), and eight-level (qud8) subspaces.Where the paper says it
Where the paper says it
Performance and Potential
The trimon achieves high fidelity operations on the three-mode circuit with fidelities exceeding 99.9% for native three-qubit conditional rotation gates. p. 6 7
ated as three transmon-like qubits or as a single collective qudit. The strong cross-Kerr couplings between
modes allow for native three-qubit conditional rotation
gates with fidelities exceeding 99. Our results demonstrate that high-fidelity, flexible multi-qubit
and qudit control is possible in a compact circuit, and
that the trimon may be a viable alternative platform for
superconducting quantum processors. Aside from the high fidelity control we demonstrate
in this work, using trimons can reduce wiring complexity by reducing the number of dedicated microwave control channels: a single charge drive line can address
three trimon modes, whereas three transmons typically
require three independent drive lines (in the absence of
frequency-multiplexed driving). Finally, the trimon qubit modes are likely to experience correlated decoherence due to shared circuit elements, such as common-mode frequency fluctuations (Z
noise) affecting all modes simultaneously. Importantly,
to the extent that frequency fluctuations are predominantly common-mode, each excitation manifold acquires
only a global phase and is therefore (approximately) insensitive to this noise source. We therefore actually demonstrated three-qubit
gates C√
iSWAP and C√
ibSWAP (conditional on qubit
C); C√
iSWAP is a controlled partial-exchange operation related to the controlled-SWAP (Fredkin) gate [48],
which can improve algorithmic performance [49]. Our results demonstrate that high-fidelity, flexible multi-qubit
and qudit control is possible in a compact circuit, and
that the trimon may be a viable alternative platform for
superconducting quantum processors.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Readout Constraints
The authors restrict readout to two qubits at a time because the resonator responses do not uniquely distinguish all 8 computational states in a single shot. This limitation is due to the nearly-equal dispersive shifts of the three qubits on each resonator making it difficult to distinguish states with the same number of excitations. p. 9 Red, blue, and
green arrows correspond to qubit modes A, B, and C, respectively. Appendix C: Readout
The nearly-equal dispersive shifts of the three qubits on
each resonator make it difficult to distinguish states with
the same number of excitations. Before each experiment, we obtain single-shot measurement histograms by preparing each of the four basis states individually many times and recording their
corresponding measurement outcomes. We then apply
a Support Vector Classifier (SVC) algorithm to define
demarcation boundaries that separate the different excitation subspaces, n = 0 (|00⟩), n = 1 (|01⟩ or |10⟩), and
n = 2 (|11⟩) (Fig.Where the paper says it
Where the paper says it
Gate Calibration and Error Correction
Gate calibration is performed using the deterministic benchmarking (DB) procedure, which involves preparing an even superposition of the two states or spaces the gate rotates between. Randomized Benchmarking (RB) experiments are used to benchmark gates against incoherent errors. p. 3 While conditional gates require only a single pulse and
exhibit high fidelity, implementing unconditional operations requires combining multiple pulses with opposite
control conditions. When applied sequentially, this approach doubles or quadruples the gate duration, increasing incoherent errors from decay and dephasing. Note that the different
fidelities of |Φ+⟩ vs |Φ−⟩ and |Ψ+⟩ vs |Ψ−⟩ merely reflect
small calibration drifts between taking data, as the definitions of these states are arbitrary. These fidelities are
SPAM-corrected using REM and MLE, and thus depend
on the mitigation/reconstruction model (see Appendix
E), but the high gate-fidelity demonstrated via QPT and
RB (which we report as independent validation) further
confirms that we can generate nearly pure entanglement
with simple pulses. 59% fidelity,
respectively, with simple pulse shapes, which can be improved using stimulated Raman adiabatic passage (STIRAP) or optimal control techniques [46]. With conditional, unconditional, and Raman gates,
combined with virtual Z and CZ rotations, we demonstrate the ability to synthesize Hamiltonians spanning
the two-qubit operator space, enabling complete control of an effective two-qubit Hamiltonian using a single
shaped envelope comprising one to a few simultaneous
frequency components.Where the paper says it
Where the paper says it
Where the paper says it
Raman Gate Fidelity
The two-tone Raman drives allow for the realization of an excitation-conserving √iSWAP gate with 99.19% fidelity and a double-excitation √ibSWAP gate with 99. p. 1 2
and √
ibSWAP [31] (double-excitation) gates in a twoqubit subspace (with the third mode prepared in |0⟩),
with SPAM-corrected QPT gate fidelities of 99. 19% and
99. The trimon features three transmon-like modes with strong all-to-all ZZ coupling. We demonstrate
high fidelity operations on the trimon, achieving flexible control of its rich state space. 59% fidelity,
respectively, with simple pulse shapes, which can be improved using stimulated Raman adiabatic passage (STIRAP) or optimal control techniques [46]. With conditional, unconditional, and Raman gates,
combined with virtual Z and CZ rotations, we demonstrate the ability to synthesize Hamiltonians spanning
the two-qubit operator space, enabling complete control of an effective two-qubit Hamiltonian using a single
shaped envelope comprising one to a few simultaneous
frequency components. These fidelities are
SPAM-corrected using REM and MLE, and thus depend
on the mitigation/reconstruction model (see Appendix
E), but the high gate-fidelity demonstrated via QPT and
RB (which we report as independent validation) further
confirms that we can generate nearly pure entanglement
with simple pulses. Moreover, we next demonstrate the
capability to generate a two-qubit maximally entangled
state (a Bell state up to a relative phase) with just one
pulse.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Theoretical Framework
The Lagrangian of the system in terms of number operator nµ takes the form H = X sum µ=A,B,C ωµnˆµ − Jµˆ2 µ − 2X sum µ>ν Jµνnˆµnˆν. The transition energy of each qubit depends on the occupation number of the other two qubits, given by ωA⟨nB⟩⟨nC ⟩ = ωA−βA+(−1)nB JAB +(−1)nC JCA. p. 8 The transition energy
of each qubit, therefore, depends on the occupation number of the other two qubits. This gives us state-dependent
transition energies:
ωA⟨nB⟩⟨nC ⟩ = ωA−βA+(−1)nB JAB +(−1)nC JCA (A12)
ω⟨nA⟩B⟨nC ⟩ = ωB−βB+(−1)nA JAB+(−1)nC JBC (A13)
ω⟨nA⟩⟨nB⟩C = ωC −βC +(−1)nA JCA+(−1)nB JBC (A14)
Appendix B: Device Design
Circuit parameters were optimized by first approximately solving the circuit Hamiltonian analytically, assuming two-fold mirror symmetry of the circuit and weak
nonlinearity. 9
are ECµ = e
2/(2C
eff
µ
):
ECA =
e
2
2(CC + CA) + C11
, ECB =
e
2
2(CC + CB) + C22
,
ECC =
e
2
4CC + C11 + C22 +
q
16(CC )
2 + (C11 − C22)
2
(A6)
The effective charging energies are strongly affected by
the large pad to ground capacitances Cii (in contrast to a
trimon in a 3D cavity, where the ground capacitances are
much smaller). The remainder of the theoretical treatment follows the framework of [65].Where the paper says it
Where the paper says it
Device Parameters
The measured device parameters show mode frequencies of ωA/2π =4.691 GHz, ωB/2π =5. p. 8 This yields
the following mode frequencies: ωA/2π =4. 691 GHz,
ωB/2π =5. 691 GHz,
ωB/2π =5. 195 GHz, and ωC /2π =5. Brown elements are Josephson junctions, which are
fabricated to be nominally identical. (b) Measured transition
energies of the device used in the experiment. 709 118 AB, 211 54 45 -
B 5. 174 129 BC, 270 38 34 -
C 5. 174 129 BC, 270 38 34 -
C 5. 940 164 CA, 243 33 30 -
Resonator 1 7.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Experimental Setup
The room temperature and cryogenic setup of the experiment involves various attenuators and filters to minimize noise. The drive line has 55 dB of fixed attenuation to attenuate the ambient noise entering the fridge, in addition to roughly 10 dB of distributed attenuation in the b). p. 5 In addition, Raman drives generate exchange and pair couplings, yielding Hamiltonians proportional to XX +Y Y and XY −Y X (iSWAP Raman) and
to XX−Y Y and XY +Y X (ibSWAP Raman). Taken together, these controls span the space of two-qubit matrices, allowing synthesis of an arbitrary two-qubit Hamiltonian using a single shaped envelope comprising one to a
few frequency components applied through the common
drive line. We find that increasing the number of repetitions n in
the n × dXd sequence does not improve the decay time,
but neither does it worsen fidelity, indicating that our
qudit control pulses are well-calibrated. This behavior
is consistent with a noise spectrum dominated either by
very low-frequency components that are largely averaged
by a single dXd cycle [43], or by higher-frequency components beyond the effective bandwidth of the DD filter
function [44, 45]; in our device, flux noise is a likely contributor to the low-frequency dephasing. Using the procedure described in Appendix A, we diagonalized the capacitance
and inductance matrices constructed from the above values, assuming identical junction Josephson energies of
EJ /h = 8. 16 GHz (equivalently a small-signal Josephson inductance LJ = ϕ
2
0/EJ = 20 nH).Where the paper says it
Where the paper says it
Where the paper says it
Future Work
Further calibrating additional two-tone Raman transitions should expand the set of directly accessible three-qubit interactions and may enable synthesis of a broad class of three-qubit Hamiltonians using a small number of simultaneous frequency components within a single shaped envelope. The design and fabrication can be further optimized to achieve coherence similar to a transmon fabricated with the same process. p. 6 An optimized design
should achieve coherence similar to a transmon fabricated
with the same process, as the two devices have very similar matrix elements [25]. Consequently, any improvement
in fabrication and materials for transmons will translate
to improvements for trimons. A similar mode structure with no flux sensitivity can be achieved, either by
breaking the ring by splitting one of the capacitor pads
to create two halves with large mutual capacitance, or by
using a linear chain of three junctions [25]. Coupling trimons is necessary in order to use them
in a scalable architecture. Importantly,
to the extent that frequency fluctuations are predominantly common-mode, each excitation manifold acquires
only a global phase and is therefore (approximately) insensitive to this noise source. This collective error mechanism naturally enables efficient error suppression by
encoding in a decoherence-free subspace insensitive to
common-mode noise [54–57]. This collective error mechanism naturally enables efficient error suppression by
encoding in a decoherence-free subspace insensitive to
common-mode noise [54–57]. Moreover, the dominant remaining error channel in such an encoding is expected to
be erasure via decay out of the subspace, opening a clear
path toward error correction schemes tailored to erasurebiased noise [58–63].Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Conclusion
The trimon provides a compact, planar, three-mode superconducting circuit where the modes can be operated as three transmon-like qubits or as a single collective qudit. The strong cross-Kerr couplings between modes allow for native three-qubit conditional rotation gates with fidelities exceeding 99. p. 6 7
ated as three transmon-like qubits or as a single collective qudit. The strong cross-Kerr couplings between
modes allow for native three-qubit conditional rotation
gates with fidelities exceeding 99. We therefore actually demonstrated three-qubit
gates C√
iSWAP and C√
ibSWAP (conditional on qubit
C); C√
iSWAP is a controlled partial-exchange operation related to the controlled-SWAP (Fredkin) gate [48],
which can improve algorithmic performance [49]. Our results demonstrate that high-fidelity, flexible multi-qubit
and qudit control is possible in a compact circuit, and
that the trimon may be a viable alternative platform for
superconducting quantum processors.Where the paper says it
Where the paper says it
Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.
Improvements for AI systems
-
Universal Hamiltonian control in a planar trimon circuit allows for synthesis of an arbitrary two-qubit Hamiltonian using a single shaped envelope comprising one to a few frequency components applied through the common drive line. This enables complete control of an effective two-qubit Hamiltonian spanning the 15-dimensional traceless two-qubit operator space (equivalently, the 15 non-identity two-qubit Pauli products).
-
The system can implement a broad class of twoqubit Hamiltonians via a single shaped envelope by combining conditional, unconditional, and Raman gates with virtual Z and CZ rotations. This expanded gate set allows for the synthesis of an arbitrary two-qubit unitary.
-
The trimon can be used as a qudit with up to 8 states, allowing for high-fidelity control by implementing single axis dynamical decoupling sequences to suppress quasi-static noise. This capability could potentially replace transmons in standard superconducting processor architectures.
-
The device enables the realization of excitation-conserving and double-excitation two-qubit entangling gates, such as the sqrt iSWAP and sqrt ibSWAP gates, with high fidelity (99.19% and 99.59% respectively). These Raman gates can be improved using stimulated Raman adiabatic passage or optimal control techniques.
-
The trimon platform reduces wiring complexity by addressing three modes with a single charge drive line, which contrasts with the need for three independent drive lines in typical transmons. This reduction in dedicated microwave control channels simplifies the architecture.
Abstract
Multimode circuits provide an avenue for flexible control of single and multi-qubit gates. In this work we implement a multimode circuit known as a trimon integrated in a planar geometry. The trimon features three transmon-like modes with strong all-to-all ZZ coupling. We demonstrate high fidelity operations on the trimon, achieving flexible control of its rich state space. This includes qubit rotations conditioned on one or both other qubits, unconditional single-qubit rotations, and both excitation-conserving and double-excitation two-qubit entangling gates. Through multi-tone driving we are able to implement all 16 two-qubit Pauli operators in the two-qubit space. We further demonstrate using the trimon as a qudit with up to 8 states and higher coherence than typical transmon-based implementations. Our results show a compact, highly controllable device that can potentially replace transmons in standard superconducting processor architectures.
Sources
- Spectator Errors in Tunable Coupling Architectures
- A universal quantum gate set for transmon qubits with strong ZZ interactions
- Fast, tunable, high fidelity cZ-gates between superconducting qubits with parametric microwave control of ZZ-coupling
- Easy better quantum process tomography
- Reducing T-Count in quantum string matching algorithm using relative-phase Fredkin gate
- How to Build a Quantum Supercomputer: Scaling from Hundreds to Millions of Qubits
- Optimizing quantum error correction protocols with erasure qubits
Related papers
- Fulqrum: a generalized framework for quantum subspace diagonalization
- Flux-Activated Resonant Control of a Bosonic Quantum Memory
- Machine learning the effects of many quantum measurements
- Barriers to dequantization of near-term molecular electronic structure methods
- BRIDGE: Lazy-Move Compilation for Dual-Species Neutral-Atom Quantum Computers
- Non-Hermiticity of an anomalous superradiant phase