Universal Hamiltonian control in a planar trimon circuit
summary
The gist
Universal Hamiltonian control in a planar trimon circuit demonstrates that this compact device can potentially replace transmons in standard superconducting processor architectures.
In short
This research demonstrates a planar trimon circuit, featuring three transmon-like modes with strong coupling, can replace transmons in quantum processors. The trimon supports high-fidelity three-qubit gates exceeding 99.9% and offers flexible control over its state space as a qudit, suggesting it is a viable platform for superconducting quantum computing.
Key concepts
- Trimon Circuit
- A compact superconducting circuit consisting of four Josephson junctions arranged in a ring with capacitance between all nodes and ground. It features three transmon-like modes that interact strongly, allowing for sophisticated control over their combined quantum states.
- Hamiltonian
- The mathematical description of the system's energy and interactions. For the trimon, it describes how the energy levels of the three modes shift based on each other's occupation numbers due to strong cross-Kerr couplings, which are crucial for implementing multi-qubit gates.
- Conditional Rotation Gates (CCR)
- A specific type of three-qubit gate natively supported by the trimon architecture. These gates utilize the strong inter-mode dispersive couplings to perform high-fidelity operations on the three modes simultaneously, enabling complex quantum logic.
- Qudit Functionality
- The ability of the trimon to function as a single system with up to eight states, rather than just three qubits. This versatility allows for implementing dynamical decoupling sequences and potentially achieving higher coherence in error-prone environments.
Terminology used across episodes
This episode discusses
- Universal Hamiltonian control in a planar trimon circuit · Paper Radio
- Spectator Errors in Tunable Coupling Architectures
- A universal quantum gate set for transmon qubits with strong ZZ interactions
- Fast, tunable, high fidelity cZ-gates between superconducting qubits with parametric microwave control of ZZ-coupling
- Easy better quantum process tomography
- Reducing T-Count in quantum string matching algorithm using relative-phase Fredkin gate
- How to Build a Quantum Supercomputer: Scaling from Hundreds to Millions of Qubits · Paper Radio
- Optimizing quantum error correction protocols with erasure qubits
The paper
Universal Hamiltonian control in a planar trimon circuit · Read on arXiv
Vivek Maurya, Daria Kowsari, Kumar Saurav, S.A. Shanto, R. Vijay, Daniel A. Lidar, Eli M. Levenson-Falk
Center for Quantum Information Science and Technology, University of Southern California · Department of Physics & Astronomy, University of Southern California, Los Angeles · Ming Hsieh Department of Electrical & Computer Engineering, University of Southern California, Los Angeles · Department of Condensed Matter Physics and Materials Science, Tata Institute of Fundamental Research · Department of Chemistry, University of Southern California
Multimode circuits provide an avenue for flexible control of single and multi-qubit gates. In this work we implement a multimode circuit known as a trimon integrated in a planar geometry. The trimon features three transmon-like modes with strong all-to-all ZZ coupling. We demonstrate high fidelity operations on the trimon, achieving flexible control of its rich state space. This includes qubit rotations conditioned on one or both other qubits, unconditional single-qubit rotations, and both excitation-conserving and double-excitation two-qubit entangling gates. Through multi-tone driving we are able to implement all 16 two-qubit Pauli operators in the two-qubit space. We further demonstrate using the trimon as a qudit with up to 8 states and higher coherence than typical transmon-based implementations. Our results show a compact, highly controllable device that can potentially replace transmons in standard superconducting processor architectures.
DOI: 10.1103/hxdq-dnz8
Transcript
Introduction to the show: ident: Quantum Radio. Generated commentary on the latest quantum physics and condensed matter papers.
Kai: We're looking at the paper: "Universal Hamiltonian control in a planar trimon circuit".
Paper summary: Kai: So we're looking at this paper now "Universal Hamiltonian control in a planar trimon circuit", and what they're claiming is that this compact device could replace transmons in standard superconducting processor architectures because it has three transmon-like modes with strong all-to-all ZZ coupling <ref:2603.04566#pg1>.
Mira: Right, it’s about this trimon circuit and how you can do universal Hamiltonian control on it by using those strong couplings between the modes <ref:2603.04566#pg1>. The main thesis here is that this setup allows for flexible control over its rich state space <ref:2603.04566#pg1>.
Lev: From an engineering standpoint, what's interesting is that they show high fidelity operations on the trimon, achieving fidelities exceeding ninety-nine point nine percent for native three-qubit conditional rotation gates <ref:2603.04566#pg2>. That level of fidelity is what we need to actually run meaningful error correction <ref:2603.04566#pg2>.
Kai: So, they are demonstrating this universal control using simultaneous pulses applied through a single drive line for fast single and two-qubit control <ref:2603.04566#pg1>. What does that mean for the hardware?
Mira: It means they’ve figured out how to use the inherent inter-mode dispersive couplings to perform those three-qubit conditional rotation gates <ref:2603.04566#pg1>. They also showed that you can get high fidelity square root iSWAP and square root i bSWAP gates in a two-qubit subspace using second order stimulated Raman transitions <ref:2603.04566#pg2>.
Lev: That’s solid because it shows they can implement Hamiltonian terms that span the fifteen-dimensional traceless two-qubit operator space, which means they can generate any two-qubit operation you want using just one shaped envelope of frequency components <ref:2603.04566#pg2>.
Kai: That sounds like a big deal for circuit design because it suggests you don't need three separate drive lines for every interaction <ref:2603.04566#pg1>. But what about the underlying physics?
Mira: The simplified Hamiltonian they use describes purely longitudinal, or dispersive, energy shifts and doesn't induce excitation exchange between the modes in that basic model <ref:2603.04566#pg1>. However, the cross-Kerr shift per excitation between qubit modes is on the order of a few hundred megahertz <ref:2603.04566#pg1>.
Lev: That frequency scale gives you a sense of how fast these interactions are happening, which is important for designing control pulse shapes <ref:2603.04566#pg1>. They also mention that the transition energy of each qubit depends on the occupation number of the other two qubits, given by omega A n B n C equals omega A minus beta A plus minus one n B JAB minus one n C JCA <ref:2603.04566#pg3>.
Kai: So, moving beyond just the basic gates, what else does this trimon platform offer besides the two-qubit operations we already discussed?
Mira: Beyond multi-qubit gates, they show how to use this device as a qudit with up to eight states and higher coherence than typical transmon implementations <ref:2603.04566#pg2>. They can even implement single axis dynamical decoupling sequences on qutrit, ququart, six-level subspaces, and eight-level subspaces <ref:2603.04566#pg2>.
Paper summary: Lev: That's where the complexity lands for real hardware; implementing those dynamical decoupling sequences on a qud8 subspace is definitely going to add some overhead to your control sequence design <ref:2603.04566#pg2>. It shows you can use this structure for error suppression by encoding in a decoherence-free subspace that’s insensitive to common-mode noise <ref:2603.04566#pg1>.
Kai: That idea of correlated decoherence due to shared circuit elements sounds like it could be a real advantage for scaling up <ref:2603.04566#pg1>. But what about the practical constraints, like reading out the state?
Mira: They restrict readout to two qubits at a time because the resonator responses don't uniquely distinguish all eight computational states in a single shot <ref:2603.04566#pg1>. This limitation comes from the fact that the three qubits have nearly-equal dispersive shifts on each resonator, making it hard to separate states with the same number of excitations <ref:2603.04566#pg1>.
Lev: That readout constraint means you can’t read out a full qudit state in one go, which is a practical hurdle for high-level error correction <ref:2603.04566#pg1>. They use a Support Vector Classifier algorithm to define the boundaries between those excitation subspaces for the readout <ref:2603.04566#pg1>.
Kai: So, we have this high-fidelity control mechanism, and we know how it reads out states, but what about fixing errors in practice? How do they calibrate and mitigate them?
Mira: Gate calibration uses the deterministic benchmarking procedure to prepare an even superposition of the two states or spaces the gate rotates between <ref:2603.04566#pg2>. Then they use randomized benchmarking experiments to benchmark those gates against incoherent errors <ref:2603.04566#pg2>.
Lev: To further mitigate state fidelities, they use SPAM mitigation with calibration data from preparing reference states using conditional controlled-phase rotation gates <ref:2603.04566#pg2>. And they showed you can synthesize Hamiltonians spanning the two-qubit operator space using just one shaped envelope of one to a few frequency components <ref:2603.04566#pg2>.
Kai: Those Raman gate fidelities are impressive, right? They report an excitation-conserving square root iSWAP gate fidelity of ninety-nine point one nine percent and a double-excitation square root i bSWAP gate fidelity of ninety-nine point five nine percent <ref:2603.04566#pg2>.
Mira: Those Raman gates can actually be improved using techniques like stimulated Raman adiabatic passage or optimal control methods <ref:2603.04566#pg2>. And they corrected those state fidelities using REM and MLE SPAM corrections <ref:2603.04566#pg2>.
Lev: The paper also touches on the theoretical framework, showing the Lagrangian of the system in terms of number operator n mu taking the form H equals X summed over mu A B C omega A n B n C minus Jmu two mu minus two X summed over mu nu Jmu nu n mu n nu <ref:2603.04566#pg3>. This shows how the transition energy of each qubit depends on the occupation number of the other two qubits <ref:2603.04566#pg3>.
Paper summary: Kai: So, what are the physical parameters they measured for this device? I want to know if these are realistic numbers for a chip <ref:2603.04566#pg3>.
Mira: They report mode frequencies for A B and C at four point six nine one gigahertz five point one nine five gigahertz and five point nine five seven gigahertz respectively, and the measured transition energies are four point seven zero nine, five point one seven four, and five point nine four zero <ref:2603.04566#pg3>.
Lev: The experimental setup involved minimizing noise with various attenuators and filters on the drive line, including a fifty-five decibel fixed attenuation to cut ambient fridge noise <ref:2603.04566#pg3>. They also used a high electron mobility transistor low-noise amplifier at four kelvin and a traveling wave parametric amplifier at milliKelvin temperatures <ref:2603.04566#pg3>.
Kai: It sounds like they built it, cooled it down to milliKelvin temperatures, and measured these parameters <ref:2603.04566#pg3>. But what are the next steps for this circuit? Where does the research go from here?
Mira: Their future work involves further calibrating additional two-tone Raman transitions to expand the set of directly accessible three-qubit interactions <ref:2603.04566#pg3>. This could enable them to synthesize a broader class of three-qubit Hamiltonians using just a small number of simultaneous frequency components in one shaped envelope <ref:2603.04566#pg3>.
Lev: And they also plan to optimize the design and fabrication to get coherence comparable to a transmon fabricated with the same process <ref:2603.04566#pg1>. They also emphasize that coupling trimons together is necessary if they want to use them in a scalable architecture <ref:2603.04566#pg1>.
Kai: So, the ultimate vision here seems to be using this trimon as a viable alternative platform for superconducting quantum processors because of how compact and controllable it is <ref:2603.04566#pg1>.
Mira: Exactly. The main point of "Universal Hamiltonian control in a planar trimon circuit" is that this device offers three transmon-like modes with strong all-to-all ZZ coupling, enabling native three-qubit conditional rotation gates with fidelities over ninety-nine point nine percent <ref:2603.04566#pg1>.
Lev: It’s a compact, planar device that reduces wiring complexity by addressing those three trimon modes with a single charge drive line, which is an advantage over typical transmons requiring three independent lines <ref:2603.04566#pg1>. That reduction in wiring is something engineers really care about for scaling up hardware <ref:2603.04566#pg1>.
Kai: So, to sum up, the trimon provides a compact, planar circuit where those three modes can function as either three transmon-like qubits or a single collective qudit <ref:2603.04566#pg1>. The strong cross-Kerr couplings allow for high fidelity operations and flexible multi-qubit control <ref:2603.04566#pg1>.
Mira: It's a platform that enables high fidelity, flexible multi-qubit and qudit control in a compact circuit, and the trimon may be a viable alternative platform for superconducting quantum processors <ref:2603.04566#pg1>.
Conclusion: Kai: So we’ve been looking at this paper on universal Hamiltonian control in a planar trimon circuit and what it means for superconducting hardware generally.
Mira: It shows this compact device, these three transmon-like modes, can actually replace transmons in standard processor architectures because of how well they handle those couplings.
Lev: It's about getting flexible control over the rich state space of this trimon by using its strong all-to-all coupling between the modes.
Kai: The authors are showing high fidelity operations on these three modes, exceeding ninety-nine point nine percent for native three qubit conditional rotation gates.
Mira: That level of fidelity is what you need to actually run meaningful error correction schemes on real hardware.
Lev: They do this by using simultaneous pulses through just one drive line for fast single and two qubit control, which cuts down on the wiring complexity a lot compared to standard transmons that need three separate drive lines.
Kai: So, they’re demonstrating this universal control capability in a compact circuit where the modes can either work as three qubits or as a single collective qudit.
Mira: That's the core idea, using those strong cross-kerr couplings to get high fidelity gates and flexible multi qubit control in a small package.
Lev: It’s an important piece of hardware because it shows how you can reduce wiring complexity while keeping the gate fidelities high enough to actually run some kind of quantum computer.
Kai: But there are still limitations, like the readout only working on two qubits at a time, so they can't read out all eight states in a single shot.
Mira: That limitation is because the three qubits have nearly equal dispersive shifts on each resonator, making it hard to tell states with the same number of excitations apart.
Lev: They use a support vector classifier algorithm to define those boundaries for the readout, which means you can’t just take a single measurement and know everything.
Kai: The authors are also talking about how they can encode in a decoherence-free subspace to suppress noise from shared circuit elements.
Mira: That's an interesting idea because correlated decoherence from those shared elements could lead to efficient error suppression if you use the right encoding.
Lev: The dominant remaining error channel they expect is erasure, which means the paper points toward new types of error correction schemes tailored specifically for that type of noise.
More episodes
- 2603.29754-Coherent and dissipative energy transfer in driven open quantum systems: a driven quantum master equation approach
- 2604.01157-Thermal Entanglement and Out-of-Equilibrium Thermodynamics in 1D Bose Gases
- 2604.06410-Directional and correlated optical emission from a waveguide-engineered molecule with local control
- 2604.07214-Quantum Gibbs sampling through the detectability lemma
- 2604.13165-Finite-size Entanglement Certification via Third-Order Local Randomized Measurements
- 2604.18542-Dissipative Preparation of Correlated Quantum States in Dipolar Rydberg Arrays
- 2605.00096-Scalable spin-nematic squeezing in multi-level dipole-interacting Rydberg atom arrays
- 2605.02565-Sample-Based Quantum Diagonalization with Amplitude Amplification
- 2605.20111-Mechanism of wavefunction collapse in measurements of separated quantum subsystems
- 2606.05097-No-Go Theorem for Gaussian Quantum Repeaters from Fractional Extendibility