Millisecond-long electron spin lifetime in CsPbI 3 perovskite nanocrystals revealed by optically detected magnetic resonance

arXiv:2603.03038 · cond-mat.mes-hall · Submitted 2026-03-03 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Quantum Radio. Generated commentary on the latest quantum physics and condensed matter papers.

Kai: I'm Kai.

Mira: And I'm Mira, here with Lev.

Kai: We're looking at the paper: "Millisecond-long electron spin lifetime in CsPbI 3 perovskite nanocrystals revealed by optically detected magnetic resonance".

Paper summary: Kai: So we’re looking at this paper titled "Millisecond-long electron spin lifetime in CsPbI3 perovskite nanocrystals revealed by optically detected magnetic resonance." It's about using this technique to figure out how long these electron spins live.

Mira: Exactly. The core idea is that they use something called resonant spin inertia, which combines Faraday rotation with the spin inertia effect to measure the time T1 for electrons or holes in CsPbI3 nanocrystals, and they claim it can be as long as zero point nine milliseconds at a temperature of one point six Kelvin.

Lev: That's a significant number when you think about spin dynamics in these materials; milliseconds is way longer than what we typically see in smaller quantum dots like GaAs thirty-three <ref:2603.03038#pg2>. But I wonder, how stable is this measurement technique for real hardware?

Kai: Well, the methodology they use involves exciting the sample with a coherent chameleon discovery laser system emitting pulses at one hundred femtosecond duration and an eight zero MHz repetition rate to probe these electron and hole resonances <ref:2603.03038#pg3>.

Mira: And they found that as you increase the magnetic field, the electron T1 actually increases because it suppresses those fluctuating nuclear fields on the electron spin relaxation, which is a key finding <ref:2603.03038#pg2>.

Lev: Suppressing fluctuations sounds promising for error correction, but what are the actual constraints on that magnetic field increase? If we need high fields to see this effect, does that mean we're dealing with very complex cryogenic setups?

Kai: The paper shows an electron T1 increasing up to sixty millitesla before it starts saturating, which suggests there’s a limit to how much you can suppress those nuclear field fluctuations by just cranking up the magnetic field.

Mira: And they estimate that this characteristic time of the nuclear field variations is around sixty microseconds, which they say is much longer than what was previously reported for things like GaAs quantum dots <ref:2603.03038#pg2>.

Lev: Sixty microseconds is still a relatively fast timescale compared to what we need for some of our error correction codes, so that suggests this might be an intermediate step rather than the final solution for long coherence.

Kai: They also noted a temperature dependence where T1 shows an activation-like behavior with an energy corresponding to a low frequency longitudinal optical phonon energy in CsPbI3 perovskite <ref:2603.03038#pg2>.

Mira: That activation-like behavior points toward specific phonon processes driving the spin relaxation, which is what their theoretical modeling explains using a two zero longitudinal optical phonon Raman process <ref:2603.03038#pg1>.

Lev: So, the theory predicts this temperature dependence based on those specific lattice vibrations; that gives us a concrete physical mechanism to work with before we even look at building anything.

Kai: It's interesting how they determined the electron g factor is one point six eight from the magnetic field dependence of the resonance frequency, which is shown in their figure one <ref:2603.03038#pg3>.

Mira: That g factor measurement gives us a specific parameter to plug into their relaxation model, and they show how that fits the observed data for both electrons and holes at one point six Kelvin <ref:2603.03038#pg2>.

Lev: From an engineering standpoint, determining the g factor precisely is crucial because it affects how we design microwave pulses or fields to manipulate these spins later on; getting that value right is a non-trivial experimental hurdle.

Kai: The authors also pointed out that their technique allows them to clearly observe both electron and hole resonances at low magnetic fields, which is something they say was difficult before <ref:2603.03038#pg2>.

Mira: So the main thrust of this paper is establishing a measurable electron spin lifetime in CsPbI3 NCs that's on the millisecond scale, opening it up as a model system for optical spin orientation and manipulation <ref:2603.03038#pg1>.

Lev: What does this mean for us who are building real hardware? It suggests that perovskite nanocrystals could be a viable platform to test these optical spin control concepts because the coherence time is getting into the millisecond range, which is better than what we’ve seen in some other systems <ref:2603.03038#pg1>.

Kai: But I have to mention their limitation; they didn't fully address how this measurement technique scales up to really demanding hardware applications, which is something they acknowledge as incomplete knowledge on spin relaxation times obscures <ref:2603.03038#pg1>.

Mira: So the paper gives us a solid physical handle on T1 in this material, linking it to nuclear field dynamics and phonon processes, but the next step for the community will be testing how robust these findings are when you push them into a real device architecture.

Conclusion: Kai: So we're wrapping up this look at the paper "Millisecond-long electron spin lifetime in CsPbI three perovskite nanocrystals revealed by optically detected magnetic resonance."

Mira: Right, so to recap, they used resonant spin inertia to measure electron and hole resonances in cesium lead iodide nanocrystals, and they found a millisecond lifetime for the electrons.

Lev: I’m looking at that title now, "Millisecond-long electron spin lifetime." That sounds really good on paper for any spintronics application.

Kai: It is a long time compared to what we usually see in other quantum dots, which is what they are comparing it to.

Mira: The implication there is that these perovskite nanocrystals could actually be a model system for how we control the spin orientation using light.

Lev: A model system sounds nice until you get to the actual hardware reality of building something that long-lived.

Kai: The authors are pointing toward using this material because it shows a strong increase in electron lifetime when you apply a magnetic field, up to sixty millitesla before it starts leveling off.

Mira: That magnetic field dependence is tied directly to those nuclear fields inside the crystal, which they estimate have a correlation time of about sixty microseconds.

Lev: Sixty microseconds is still on the faster side for some error correction codes we’re trying to build, so we need to figure out how that really translates into a usable system.

Kai: The temperature dependence also shows an activation-like behavior linked to the low frequency longitudinal optical phonon energy in cesium lead iodide.

Mira: That tells us the physics driving this relaxation is specifically tied to those lattice vibrations, which their theoretical model explains using a two zero longitudinal optical phonon Raman process.

Lev: So they have a physical mechanism mapped out linking the temperature, the magnetic field, and the material's internal structure.

Kai: The overall conclusion is that electron spin relaxation time T1 is twice longer than what they found for holes.

Mira: That difference between electrons and holes is a key piece of information for understanding how spin physics works in this specific crystal structure.

Lev: It gives us a concrete scaling factor to consider when we look at building the next generation of quantum devices on these perovskites.

Technische Universitaet Dortmund University of Technology Dortmund Institute Ioffe Institute Russian Academy of Sciences P N Lebedev Physical Institute of the Russian Academy of Sciences Spin Optics Laboratory St Petersburg State University ITMO University St Petersburg State Institute of Technology Research Center FEMS Technische Universitaet Dortmund

cond-mat.mes-hall

Submitted: 2026-03-03

Updated: 2026-11-18

Comments: 12 pages, 3 figures

Journal ref: Phys. Rev. B 114, 225301 (2026)

DOI: 10.1103/84nx-1r8c

License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/

The gist: Millisecond-long electron spin lifetime in CsPbI3 perovskite nanocrystals revealed by optically detected magnetic resonance allows researchers to determine key spin parameters like longitudinal…

Key concepts

Optically Detected Magnetic Resonance (ODMR)
This technique measures electron and hole resonances by combining Faraday rotation with the spin inertia effect. It allows researchers to attribute the measured T1 time specifically to electrons or holes within the nanocrystals, providing detailed information about their spin dynamics.
Longitudinal Relaxation Time (T1)
T1 is a measure of how quickly an electron's spin returns to its equilibrium state after being disturbed. In this study, T1 was found to be twice as long for electrons compared to holes, indicating that electrons have a much longer spin lifetime in CsPbI3 NCs under specific conditions.
Two-LO-Phonon Raman Process
This is the theoretical model used to explain how the electron spin relaxes. It involves virtual transitions between energy states in the nanocrystal, where phonons (lattice vibrations) are absorbed and emitted. This process accounts for the observed temperature dependence of T1.
Spin Parameter Determination
The study successfully determined key spin parameters like g factors and T1 by analyzing how these values change with magnetic field and temperature. The findings show that the increase in electron T1 with magnetic field is due to the suppression of fluctuating internal nuclear fields.

Terminology

Summary

Millisecond-long electron spin lifetime in CsPbI3 perovskite nanocrystals revealed by optically detected magnetic resonance allows researchers to determine key spin parameters like longitudinal relaxation times and g factors in CsPbI3 NCs The electron T1 time can be as long as 0. p. 09 ms at a temperature of 1. p. 06 K This finding reveals the potential of perovskite NCs as a model system for optical spin orientation and manipulation

Experimental Methodology

The study employed the resonant spin inertia technique based on optically detected magnetic resonance to measure electron and hole resonances in CsPbI3 NCs The technique involves measuring the Faraday rotation combined with the spin inertia effect to attribute T1 to electrons or holes The sample was excited by a Coherent Chameleon Discovery laser system emitting 100 fs pulses at a repetition rate of 80 MHz The longitudinal spin relaxation time T1 is evaluated by scanning the magnetic field with the rf frequency frf fixed to detect magnetic resonances for electrons and holes

Spin Parameter Determination

The experiment successfully determined several crucial spin parameters for the NCs Key findings include:

  1. The electron T1 increases with magnetic field due to the suppression of fluctuating nuclear fields on electron spin relaxation. p. 1

  2. The characteristic time of the nuclear field variations is estimated to be much longer than reported for GaAs quantum dots. p. 1

  3. For relatively high magnetic fields, low laser powers, and a temperature of 1. p. 16 K, the electron T1 reaches as long as 0. p. 09 ms.

  4. The temperature dependence of T1 exhibits an activation-like behavior with a characteristic energy corresponding to a low-frequency LO phonon energy in CsPbI3 perovskite. p. 1

Theoretical Modeling of Relaxation

A model for spin relaxation in NCs was developed based on a two-LO-phonon Raman process to explain the observed temperature dependence of T1 This theoretical framework involves virtual transitions between the ground and excited states of the NC accompanied by phonon absorption and emission. The transition rate is given by an expression that includes terms related to the Rashba constant αR and optical phonon energy omegaLO This model successfully reproduces the activation-like character of the T1 temperature dependence. p. 6

Conclusion and Implications

The research concludes that the electron spin relaxation time T1 is twice longer than the T1 for holes The strong increase of electron T1 with magnetic field up to 60 mT and subsequent saturation is attributed to the suppression of fluctuating internal nuclear fields The measured correlation time τc characterizing the random variation of the effective nuclear field in NCs is approximately 60 µs This suggests that perovskite NCs embedded in a glass matrix are a promising artificially created confined system for spintronics applications. The overall spin relaxation rate is estimated by Eq. p. 1 (25), which incorporates factors like the effective Bohr radius and optical phonon energy. p. 6

Acknowledgments

The authors acknowledge fruitful discussions with M. O. Nestoklon They also acknowledge support from the Deutsche Forschungsgemeinschaft (Project YA 65/28-1, No. p. 6 527080192). p. 6 E.V.K. and M.S.K. acknowledge support by the Saint Petersburg State University (Grant No. p. 6 125022803069-4). p. 6

Appendix Details

The appendix details the relevant matrix elements introduced in Eq. (17a) through (17h) for the transition processes The total matrix element M(1)(q1, q2) is given by Eq. p. 7 (18a), and the spin-dependent part of the matrix element Mˆ is described by Eq. p. 8 (23). The final expression for the transition rate in Eq. p. 6 (25) can be rewritten in a form convenient for numerical estimates. p. 8

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Integration of spin relaxation models into material property prediction allows AI systems to accurately predict spin lifetimes T1 based on temperature and magnetic field conditions for perovskite nanocrystals. The improved system can estimate T1 using the derived formula from Equation 5, which shows an activation dependence on temperature with an energy Ea of 3.2 meV.

  2. Development of a simulation module capable of modeling two-phonon Raman processes enables AI to predict the temperature dependence of spin relaxation rates based on the theoretical framework developed in Section V. This allows for more accurate prediction of T1 behavior across a wider range of experimental conditions than simple exponential fits.

  3. Implementation of a model that incorporates magnetic field suppression effects allows the AI system to distinguish between relaxation mechanisms dominated by fluctuating nuclear fields and those limited by external magnetic fields, as described in Equation 4. This enables better classification of spin dynamics observed in experimental data like the saturation behavior of T1 with B.

  4. Creation of a parameter estimation tool that utilizes ODMR spectra to extract key physical parameters such as g factors and the spread of g factors Delta g, using the Gaussian distribution model from Equation 2. This allows AI to automatically fit experimental data to determine material characteristics without relying solely on manual fitting procedures.

  5. A predictive engine that uses calculated matrix elements from Appendix sections, such as Eq 18a and 18b, can estimate the transition rate Gamma down spin flip using the derived expression in Equation 25. This capability allows for theoretical prediction of spin relaxation rates based on calculated physical constants like the Rashba constant alpha R and phonon frequencies.

Sources

Related papers