Confinement Limits Cell Shape and Mitotic Pressure During Division

arXiv:2602.18909 · cond-mat.soft, physics.bio-ph, q-bio.CB · Submitted 2026-02-21 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Condensed Matter. The day in condensed matter: materials, phases and the measurements under them.

Kai: I'm Kai.

Mira: And I'm Mira, here with Lev.

Kai: We're looking at the paper: "Confinement Limits Cell Shape and Mitotic Pressure During Division".

Mira: Here's the gist of the paper. Cells often divide under mechanical confinement, where surrounding structures restrict shape changes during cytokinesis <ref:2602.18909#pg2>.

Kai: Here we develop a minimal mechanical theory of cell division under confinement <ref:2602.18909#pg2>.

Mira: Modeling the cell as an incompressible volume bounded by an interface with effective isotropic tension, we show that confinement restricts the set of mechanically admissible furrow shapes <ref:2602.18909#pg2>.

Kai: As the furrow radius decreases, it reaches a confinement-induced minimum <ref:2602.18909#pg3>.

Paper summary: Kai: So, to recap what we're seeing with this paper on "Confinement Limits Cell Shape and Mitotic Pressure During Division," it’s centered on how surrounding structures restrict shape changes during cytokinesis. The authors develop a minimal mechanical theory where they model the cell as an incompressible volume with an interface under effective isotropic tension >

Mira: They show that confinement restricts the set of mechanically admissible furrow shapes, and as the furrow radius decreases, it hits a confinement-induced minimum size >

Lev: Beyond that minimum radius, further ingression doesn't change the interface shape at all, meaning both the pressure and the axial force just saturate >

Kai: They then analyze this in rigid, soft, and strong three-dimensional confinement and conclude that there is one underlying geometric mechanism for all those different setups >

Mira: And after rescaling everything by their appropriate geometric scale—like using the cell size for rigid confinement or the confinement size in fully enclosing three dimensional confinement—cells of different sizes collapse onto a single universal curve >

Lev: The relevant length scale depends on the setup; it’s the cell size for rigid and soft confinement, but it’s the physical size of the environment when it's fully enclosing three dimensions >

Kai: In soft confinement specifically, environmental stiffness and spindle-generated axial forces control how much pressure there is, but that geometric constraint is what fixes the absolute maximum levels >

Conclusion: Mira: Thinking about the title "Confinement Limits Cell Shape and Mitotic Pressure During Division," it really boils down to this idea that geometry sets the boundaries for division mechanics >

Kai: It’s not just that things get squished; it’s that there's a fundamental geometric constraint on how small the furrow can get before it stops changing its shape >

Lev: And for real hardware, what this tells us is that even if you try to push the division process further, you hit a hard mechanical ceiling dictated by the walls or environment >

Mira: So, when we look at cells in tight spaces or dense tissues, this paper suggests that force and pressure scale with the confining diameter instead of just the cell size >

Kai: It’s interesting because it gives us a physical explanation for seeing amplified mitotic forces in narrow channels, which is something we see experimentally >

Lev: And for future work, they point out that their model assumes incompressibility and effective isotropic surface tension, which means it doesn't account for things like viscous dissipation or active cortical remodeling >

Mira: That’s a fair limitation. If we want to build more realistic models, we need to include those dynamic elements that the current framework simplifies away >

Centre for Mechanochemical Cell Biology and Division of Biomedical Sciences, University of Warwick

cond-mat.soft, physics.bio-ph, q-bio.CB

Submitted: 2026-02-21

Updated: 2026-11-10

Comments: 11 pages, 4 figures

License: http://creativecommons.org/licenses/by-sa/4.0/

Importance score: 80/100

The gist: Cells often divide under mechanical confinement, where surrounding structures restrict shape changes during cytokinesis <ref:2602.18909#pg2>.

Key concepts

Furrow Radius (Rdiv)
This is defined as the narrowest cross-section of the cell's membrane-cortex interface at the division plane. It is a key geometric parameter used to characterize cytokinesis and determine when further cell ingression stops due to confinement constraints.
Confinement Geometries
The paper analyzes three types of confinement: rigid, soft, and cylindrical. These geometries impose different mechanical restrictions on the cell's shape during division, dictating whether the cell size or the confining boundaries set the relevant length scale for force and pressure calculations.
Geometric Constraint Saturation
As a furrow radius decreases, it reaches a minimum value imposed by confinement geometry. Beyond this point, adding more ingression does not change the interface shape; consequently, both mitotic pressure and axial force saturate at essentially constant levels.

Terminology

Summary

Cells often divide under mechanical confinement, where surrounding structures restrict shape changes during cytokinesis <ref:2602. p. 0

Where the paper says it

Geometric Limits of Mitotic Pressure Under Confinement Amit Singh Vishen1, ∗ 1Centre for Mechanochemical Cell Biology and Division of Biomedical Sciences, Warwick Medical School, University of Warwick, Coventry CV4 7AL, United Kingdom. (Dated: February 24, 2026) Cells often divide under mechanical confinement, where surrounding structures restrict shape changes during cytokinesis.

18909#pg2>. Here we develop a minimal mechanical theory of cell division under confinement <ref:2602. p. 0
Where the paper says it

Although forces generated during confined division have been measured experimentally, it remains unclear how confinement geometry and mechanics determine the transmitted force. Here we develop a minimal mechanical theory of cell division under confinement.

18909#pg2>. Modeling the cell as an incompressible volume bounded by an interface with effective isotropic tension, we show that confinement restricts the set of mechanically admissible furrow shapes <ref:2602. p. 0
Where the paper says it

Here we develop a minimal mechanical theory of cell division under confinement. Modeling the cell as an incompressible volume bounded by an interface with effective isotropic tension, we show that confinement restricts the set of mechanically admissible furrow shapes.

18909#pg2>. As the furrow radius decreases, it reaches a confinement-induced minimum <ref:2602. p. 0
Where the paper says it

Modeling the cell as an incompressible volume bounded by an interface with effective isotropic tension, we show that confinement restricts the set of mechanically admissible furrow shapes. As the furrow radius decreases, it reaches it reaches a confinement-induced minimum.

18909#pg3>. Beyond this point, further ingression does not alter the interface shape, and both pressure and axial force saturate <ref:2602. p. 0
Where the paper says it

As the furrow radius decreases, it reaches it reaches a confinement-induced minimum. Beyond this point, further ingression does not alter the interface shape, and both pressure and axial force saturate.

18909#pg4>. We analyze force and pressure in rigid, soft, and strong three-dimensional confinement and demonstrate that a single geometric mechanism underlies these distinct cases <ref:2602. p. 0
Where the paper says it

Beyond this point, further ingression does not alter the interface shape, and both pressure and axial force saturate. We analyze force and pressure in rigid, soft, and strong three-dimensional confinement and demonstrate that a single geometric mechanism underlies these distinct cases.

18909#pg4>. After rescaling force and length by the appropriate geometric scale, cells of different size and surface tension collapse onto a single universal curve <ref:2602. p. 0
Where the paper says it

We analyze force and pressure in rigid, soft, and strong three-dimensional confinement and demonstrate that a single geometric mechanism underlies these distinct cases. After rescaling force and length by the appropriate geometric scale, cells of different size and surface tension collapse onto a single universal curve.

18909#pg4>. The relevant length scale is the cell size for rigid and soft confinement, and the confinement size in fully enclosing three-dimensional confinement <ref:2602. p. 0
Where the paper says it

After rescaling force and length by the appropriate geometric scale, cells of different size and surface tension collapse onto a single universal curve. The relevant length scale is the cell size for rigid and soft confinement, and the confinement size in fully enclosing three-dimensional confinement.

18909#pg4>. In soft confinement, environmental stiffness and spindle-generated axial forces determine the operating force and pressure, while the geometric constraint fixes the maximal attainable levels <ref:2602. p. 0
Where the paper says it

The relevant length scale is the cell size for rigid and soft confinement, and the confinement size in fully enclosing three-dimensional confinement. In soft confinement, environmental stiffness and spindle-generated axial forces determine the operating force and pressure, while the geometric constraint fixes the maximal attainable levels.

18909#pg4>. In summary, our results show that mitotic force transmission and mitotic pressure during cytokinesis are bounded by confinement geometry, with material properties and active forces selecting the operating point within these geometry-imposed limits <ref:2602. p. 0
Where the paper says it

In soft confinement, environmental stiffness and spindle-generated axial forces determine the operating force and pressure, while the geometric constraint fixes the maximal attainable levels. In summary, our results show that mitotic force transmission and mitotic pressure during cytokinesis are bounded by confinement geometry, with material properties and active forces selecting the operating point within these geometry-imposed limits.

18909#pg4>.

Geometric Constraints on Furrow Evolution

The authors characterize cytokinesis by the furrow radius Rdiv, defined as the radius of the narrowest cross-section of the membrane–cortex interface at the division plane <ref:2602.18909#pg2>. Within this framework, they identify two mechanical regimes <ref:2602. p. 0

Where the paper says it

Within this framework, we identify two mechanical regimes. During early ingression, admissible interface shapes evolve continuously as the furrow radius decreases, leading to systematic curvature changes and a corresponding arXiv:2602.

18909#pg4>. During early ingression, admissible interface shapes evolve continuously as the furrow radius decreases, leading to systematic curvature changes and a corresponding arXiv:2602. p. 0
Where the paper says it

Within this framework, we identify two mechanical regimes. During early ingression, admissible interface shapes evolve continuously as the furrow radius decreases, leading to systematic curvature changes and a corresponding arXiv:2602.

18909v1 [cond-mat. p. 0
Where the paper says it

During early ingression, admissible interface shapes evolve continuously as the furrow radius decreases, leading to systematic curvature changes and a corresponding arXiv:2602. 18909v1 [cond-mat.

soft] 21 Feb 2026 <ref:2602. p. 0
Where the paper says it

18909v1 [cond-mat. soft] 21 Feb 2026

18909#pg4>. Once the furrow radius reaches a confinement-induced minimum set by geometric constraints, further ring contraction does not lead to additional furrow ingression <ref:2602. p. 2
Where the paper says it

Once Rcyto reaches Rmin div , further ring contraction does not lead to additional furrow ingression (Fig. The two unknowns RF and RH are determined by imposing the two constraints: given confinement separation L, and constant volume Vcell (see Appendix A).

18909#pg4>. As a consequence, mitotic pressure saturates, and cytokinesis proceeds through septum-like closure at essentially constant pressure <ref:2602. p. 1
Where the paper says it

Beyond this point, further ingression does not modify the interface shape. As a consequence, mitotic pressure saturates, and cytokinesis proceeds through septum-like closure at essentially constant pressure.

18909#pg4>.

Analysis of Confinement Geometries

The study analyzes a hierarchy of confinement geometries: rigid, soft, and cylindrical confinement <ref:2602.18909#pg4>. Rigid axial confinement determines the admissible interface shapes and how mitotic pressure evolves with furrow ingression <ref:2602. p. 1

Where the paper says it

We analyze a hierarchy of confinement geometries: rigid, soft, and cylindrical confinement. Rigid axial confinement determines the admissible interface shapes and how mitotic pressure evolves with furrow ingression.

18909#pg4>. Soft confinement is modeled as a deformable environment with finite stiffness and selects the operating force through force balance, making explicit how mitotic pressure depends on environmental mechanics <ref:2602. p. 1
Where the paper says it

Rigid axial confinement determines the admissible interface shapes and how mitotic pressure evolves with furrow ingression. Soft confinement is modeled as a deformable environment with finite stiffness and selects the operating force through force balance, making explicit how mitotic pressure depends on environmental mechanics.

18909#pg5>. Cylindrical confinement restricts both axial and radial deformations, and the cylinder radius sets the relevant geometric length scale <ref:2602. p. 1
Where the paper says it

Soft confinement is modeled as a deformable environment with finite stiffness and selects the operating force through force balance, making explicit how mitotic pressure depends on environmental mechanics. We then consider cylindrical confinement, in which both axial and radial deformations are restricted and the cylinder radius sets the relevant geometric length scale.

18909#pg5>.

Role of Material Properties and Active Forces

The analysis shows that material properties and active forces select the operating point within geometry-imposed limits <ref:2602.18909#pg4>. In soft confinement, increasing environmental stiffness shifts the operating pressure while leaving the minimum furrow radius unchanged <ref:2602. p. 5

Where the paper says it

Under confinement, septum-like division emerges naturally once admissible shapes are exhausted, without invoking detailed assumptions about ring mechanics. In soft confinement, increasing environmental stiffness shifts the operating pressure while leaving the minimum furrow radius unchanged.

18909#pg5>. Furthermore, spindle-generated forces enter additively in the axial force balance and therefore shift the operating point along the force-geometry relation determined by confinement <ref:2602. p. 3
Where the paper says it

Spindle forces enter additively in the force balance and therefore shift the operating point along the forcegeometry relation determined by confinement. The effect of a constant spindle force can be included in the model by redefining the rest length of the spring as X′ ref = Xref + Fspindle/k.

18909#pg5>. The authors conclude that geometry defines the allowable range of pressure; material properties and active forces select an operating point within that range <ref:2602. p. 5
Where the paper says it

Spindle-generated forces enter additively in the axial force balance and similarly shift the pressure level and the onset of saturation, but they do not remove the confinement-induced constraint on shape. Geometry defines the allowable range of pressure; material properties and active forces select an operating point within that range.

18909#pg7>.

Implications for Mechanical Explanation

The model provides a physical explanation for septum-like closure in confined environments <ref:2602.18909#pg7>. Under strong three-dimensional confinement, the confining diameter replaces cell size as the relevant geometric scale <ref:2602. p. 5

Where the paper says it

Geometry defines the allowable range of pressure; material properties and active forces select an operating point within that range. Under strong three-dimensional confinement, the confining diameter replaces cell size as the relevant geometric scale.

18909#pg7>. This provides a mechanical explanation for the amplification of mitotic forces observed in narrow channels and dense tissues <ref:2602. p. 5
Where the paper says it

Once radial confinement is saturated, curvature is fixed by chamber geometry, and axial force becomes independent of intrinsic cell size. This provides a mechanical explanation for the amplification of mitotic forces observed in narrow channels and dense tissues.

18909#pg7>. The framework yields clear experimental predictions, such as force and pressure scaling with the confining diameter rather than cell size under strong three-dimensional confinement. p. 5
Where the paper says it

The framework yields clear experimental predictions. Under strong three-dimensional confinement, force and pressure should scale with the confining diameter rather than cell size.

Appendix A Details

The shape of a confined dividing cell is derived assuming axisymmetry and constant surface tension. The surface is parametrized by arc length s and local radius r(s), with θ(s) the angle between the surface tangent and the axis of symmetry. p. 5

Where the paper says it

The cell surface is modeled as a constant–mean–curvature (CMC) surface enclosing an incompressible fluid [11, 24–26]. The surface is parametrized by arc length s and local radius r(s), with θ(s) the angle between the surface tangent and the axis of symmetry.

The axial coordinate follows from dz/ds = cos θ, yielding z(s) = RH / Rmax E(u, α) - RF / Rmax F(u, α). p. 6
Where the paper says it

(A2) integrates to the standard CMC profile r(s) = Rmax p 1 − α sin2 u. (A5) The axial coordinate follows from dz/ds = cos θ.

The half-length of the confined cell is L = z(sd) + z(sw), so that the total axial extent is 2L. p. 6
Where the paper says it

(A5) by setting r = Rdiv and r = Rw, respectively. p. 6

Where the paper says it

The arc-length positions sd and sw are obtained from Eq. (A5) by setting r = Rdiv and r = Rw, respectively.

The half-length of the confined cell is L = z(sd) + z(sw), (A7) so that the total axial extent is 2L.

Appendix A Details Continued

The arc-length positions sd and sw are obtained from Eq. (A5) by setting r = Rdiv and r = Rw, respectively. The enclosed volume between the division plane and the wall is V = V (sd) + V (sw), where V (s) = π / Z s 0 r 2(s) dz / ds ds. p. 6

Where the paper says it

The half-length of the confined cell is L = z(sd) + z(sw), (A7) so that the total axial extent is 2L. The enclosed volume between the division plane and the wall is V = V (sd) + V (sw), where V (s) = π Z s 0 r 2 (s) dz ds ds.

This integral can be expressed in closed form using elliptic integrals. p. 6
Where the paper says it

The enclosed volume between the division plane and the wall is V = V (sd) + V (sw), where V (s) = π Z s 0 r 2 (s) dz ds ds. (A8) This integral can be expressed in closed form using elliptic integrals.

For a given confinement geometry and applied force, the curvature radius c RH is determined self-consistently by imposing volume conservation. p. 6
Where the paper says it

(A8) This integral can be expressed in closed form using elliptic integrals. For a given confinement geometry and applied force, the curvature radius c RH is determined self-consistently by imposing volume conservation.

The resulting force–volume, pressure–volume, and force–radius relations are shown in Fig. p. 4
Where the paper says it

Under cylindrical confinement, the environment replaces the cell as the dominant geometric scale, highlighting the central role of free volume and three-dimensional confinement geometry in controlling axial compression during cytokinesis. The resulting force–volume, pressure–volume, and force–radius relations are shown in Fig.

3(b–e).

In cylindrical confinement, the geometry of the chamber fixes the curvature scale, and the problem reduces to a single effective control parameter, the dimensionless free volume ∆V /V0. In this rescaled description, the cell shape, interface curvature, and confinement-limited furrow radius are fully determined by ∆V /V0 and are independent of the intrinsic cell size and surface tension. p. 4

Where the paper says it

With this choice, the geometry of the chamber fixes the curvature scale, and the problem reduces to a single effective control parameter, the dimensionless free volume ∆V /V0, where V0 = 2πR3 cyl/3. In this rescaled description, the cell shape, interface curvature, and confinement-limited furrow radius are fully determined by ∆V /V0 and are independent of the intrinsic cell size and surface tension.

This behavior contrasts with axial confinement, where the cell radius sets the geometric scale and the force grows proportionally with cell size. p. 4
Where the paper says it

In this rescaled description, the cell shape, interface curvature, and confinement-limited furrow radius are fully determined by ∆V /V0 and are independent of the intrinsic cell size and surface tension. This behavior contrasts with axial confinement, where the cell radius sets the geometric scale and the force grows proportionally with cell size.

The environment replaces the cell as the dominant geometric scale, highlighting the central role of free volume and three-dimensional confinement geometry in controlling axial compression during cytokinesis. p. 4
Where the paper says it

This behavior contrasts with axial confinement, where the cell radius sets the geometric scale and the force grows proportionally with cell size. Under cylindrical confinement, the environment replaces the cell as the dominant geometric scale, highlighting the central role of free volume and three-dimensional confinement geometry in controlling axial compression during cytokinesis.

In cylindrical confinement, once radial confinement is saturated, curvature is fixed by chamber geometry, and axial force becomes independent of intrinsic cell size. This provides a mechanical explanation for the amplification of mitotic forces observed in narrow channels and dense tissues. p. 5

Where the paper says it

Once radial confinement is saturated, curvature is fixed by chamber geometry, and axial force becomes independent of intrinsic cell size. This provides a mechanical explanation for the amplification of mitotic forces observed in narrow channels and dense tissues.

The model assumes incompressibility, effective isotropic surface tension, and quasistatic force balance. p. 5
Where the paper says it

This provides a mechanical explanation for the amplification of mitotic forces observed in narrow channels and dense tissues. The model assumes incompressibility, effective isotropic surface tension, and quasistatic force balance.

p. 5
Where the paper says it

This provides a mechanical explanation for the amplification of mitotic forces observed in narrow channels and dense tissues. The model assumes incompressibility, effective isotropic surface tension, and quasistatic force balance.

p. 5
Where the paper says it

This provides a mechanical explanation for the amplification of mitotic forces observed in narrow channels and dense tissues. The model assumes incompressibility, effective isotropic surface tension, and quasistatic force balance.

p. 5
Where the paper says it

This provides a mechanical explanation for the amplification of mitotic forces observed in narrow channels and dense tissues. The model assumes incompressibility, effective isotropic surface tension, and quasistatic force balance.

These simplifications isolate geometric effects but neglect viscous dissipation and active cortical remodeling <ref:2602. p. 5
Where the paper says it

The model assumes incompressibility, effective isotropic surface tension, and quasistatic force balance. These simplifications isolate geometric effects but neglect viscous dissipation and active cortical remodeling.

p. 5
Where the paper says it

The model assumes incompressibility, effective isotropic surface tension, and quasistatic force balance. These simplifications isolate geometric effects but neglect viscous dissipation and active cortical remodeling.

p. 5
Where the paper says it

The model assumes incompressibility, effective isotropic surface tension, and quasistatic force balance. These simplifications isolate geometric effects but neglect viscous dissipation and active cortical remodeling.

p. 5
Where the paper says it

The model assumes incompressibility, effective isotropic surface tension, and quasistatic force balance. These simplifications isolate geometric effects but neglect viscous dissipation and active cortical remodeling.

18909#pg7>. The geometry-induced minimum furrow radius identified here represents a robust mechanical constraint that should persist beyond the present approximations <ref:2602. p. 5
Where the paper says it

Incorporating such dynamics will be necessary to describe the full time evolution of cytokinesis [19, 20]. Nevertheless, the geometry-induced minimum furrow radius identified here represents a robust mechanical constraint that should persist beyond the present approximations.

p. 5
Where the paper says it

Incorporating such dynamics will be necessary to describe the full time evolution of cytokinesis [19, 20]. Nevertheless, the geometry-induced minimum furrow radius identified here represents a robust mechanical constraint that should persist beyond the present approximations.

p. 5
Where the paper says it

Incorporating such dynamics will be necessary to describe the full time evolution of cytokinesis [19, 20]. Nevertheless, the geometry-induced minimum furrow radius identified here represents a robust mechanical constraint that should persist beyond the present approximations.

p. 5
Where the paper says it

Incorporating such dynamics will be necessary to describe the full time evolution of cytokinesis [19, 20]. Nevertheless, the geometry-induced minimum furrow radius identified here represents a robust mechanical constraint that should persist beyond the present approximations.

18909#pg7>.

Constant-tension descriptions of confined interfaces are, in principle, unstable to off-center perturbations. Ring positioning can therefore be regarded as a fast, actively controlled degree of freedom that maintains midplane symmetry. p. 5

Where the paper says it

In living cells, however, the contractile ring is actively positioned and stabilized by spindle-mediated cues and cortical patterning [30]. Ring positioning can therefore be regarded as a fast, actively controlled degree of freedom that maintains midplane symmetry, while slower geometric constraints determine the admissible interface shapes and resulting pressure.

The present framework assumes constant cell volume during cytokinesis <ref:2602. p. 5
Where the paper says it

Ring positioning can therefore be regarded as a fast, actively controlled degree of freedom that maintains midplane symmetry, while slower geometric constraints determine the admissible interface shapes and resulting pressure. The present framework assumes constant cell volume during cytokinesis.

18909#pg7>. In a quasistatic approximation, slow volume changes can be incorporated by treating total volume as a slowly varying parameter, which shifts the force–geometry relation without altering the existence of a confinement-induced minimum furrow radius <ref:2602. p. 5
Where the paper says it

Animal cells exhibit volume changes across the cell cycle [31, 32]. In a quasistatic approximation, slow volume changes can be incorporated by treating total volume as a slowly varying parameter, which shifts the force–geometry relation without altering the existence of a confinement-induced minimum furrow radius.

18909#pg7>. The geometry-induced saturation mechanism therefore persists provided volume changes remain gradual compared to mechanical relaxation <ref:2602. p. 5
Where the paper says it

In a quasistatic approximation, slow volume changes can be incorporated by treating total volume as a slowly varying parameter, which shifts the force–geometry relation without altering the existence of a confinement-induced minimum furrow radius. The geometry-induced saturation mechanism therefore persists provided volume changes remain gradual compared to mechanical relaxation.

18909#pg7>.

The framework yields clear experimental predictions, such as force and pressure scaling with the confining diameter rather than cell size under strong three-dimensional confinement. Under deformable environments, increasing stiffness should shift the operating point without altering the geometry-induced saturation plateau. p. 5

Where the paper says it

Under strong three-dimensional confinement, force and pressure should scale with the confining diameter rather than cell size. In deformable environments, increasing stiffness should shift the operating point without altering the geometry-induced saturation plateau.

Perturbing spindle forces should change the pressure level at which saturation occurs while preserving the minimum furrow radius set by geometric constraints. p. 5
Where the paper says it

In deformable environments, increasing stiffness should shift the operating point without altering the geometry-induced saturation plateau. Perturbing spindle forces should change the pressure level at which saturation occurs while preserving the minimum furrow radius set by geometric constraints.

p. 5
Where the paper says it

In deformable environments, increasing stiffness should shift the operating point without altering the geometry-induced saturation plateau. Perturbing spindle forces should change the pressure level at which saturation occurs while preserving the minimum furrow radius set by geometric constraints.

p. 5
Where the paper says it

In deformable environments, increasing stiffness should shift the operating point without altering the geometry-induced saturation plateau. Perturbing spindle forces should change the pressure level at which saturation occurs while preserving the minimum furrow radius set by geometric constraints.

The model assumes incompressibility, effective isotropic surface tension, and quasistatic force balance. These simplifications isolate geometric effects but neglect viscous dissipation and active cortical remodeling <ref:2602.18909#pg7>. The geometry-induced minimum furrow radius identified here represents a robust mechanical constraint that should persist beyond the present approximations <ref:2602.18909#pg7>.

Under strong three-dimensional confinement, force and pressure should scale with the confining diameter rather than cell size. In deformable environments, increasing stiffness should shift the operating point without altering the geometry-induced saturation plateau. p. 5

Where the paper says it

Under strong three-dimensional confinement, force and pressure should scale with the confining diameter rather than cell size. In deformable environments, increasing stiffness should shift the operating point without altering the geometry-induced saturation plateau.

p. 5
Where the paper says it

Under strong three-dimensional confinement, force and pressure should scale with the confining diameter rather than cell size. In deformable environments, increasing stiffness should shift the operating point without altering the geometry-induced saturation plateau.

Perturbing spindle forces should change the pressure level at which saturation occurs while preserving the minimum furrow radius set by geometric constraints. The model assumes incompressibility, effective isotropic surface tension, and quasistatic force balance. These simplifications isolate geometric effects but neglect viscous dissipation and active cortical remodeling <ref:2602.18909#pg7>. The geometry-induced minimum furrow radius identified here represents a robust mechanical constraint that should persist beyond the present approximations <ref:2602.18909#pg7>.

Under strong three-dimensional confinement, force and pressure should scale with the confining diameter rather than cell size. In deformable environments, increasing stiffness should shift the operating point without altering the geometry-induced saturation plateau. Perturbing spindle forces should change the pressure level at which saturation occurs while preserving the minimum furrow radius set by geometric constraints. The model assumes incompressibility, effective isotropic surface tension, and quasistatic force balance. These simplifications isolate geometric effects but neglect viscous dissipation and active cortical remodeling <ref:2602.18909#pg7>. The geometry-induced minimum furrow radius identified here represents a robust mechanical constraint that should persist beyond the present approximations <ref:2602.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. System can predict force and pressure saturation based on confinement geometry, specifically identifying when further ingression does not alter the interface shape leading to a plateau in mitotic pressure.

  2. The system can model force transmission under rigid, soft, and strong three-dimensional confinement by determining if the geometric mechanism is universal across these distinct cases.

  3. The improved system can calculate the confinement-induced minimum furrow radius based on the confinement size and cell size for different types of confinement (rigid, soft, cylindrical).

  4. The system can predict how environmental stiffness in soft confinement shifts the operating pressure while leaving the geometric constraints unchanged, as stated: Increasing stiffness kappa steepens the environmental response and shifts the equilibrium toward smaller separations and larger forces.

  5. The system can analyze force balance under soft confinement by incorporating spindle-generated axial forces additively, shifting the operating point along the force-geometry relation.

  6. The system can determine if a cell will experience septum-like closure in confined environments by checking if its ingression reaches the confinement-induced minimum furrow radius.

  7. Under strong three-dimensional confinement, the system can predict that force and pressure should scale with the confining diameter rather than cell size, providing a mechanical explanation for force amplification in narrow channels.

Abstract

Cells often divide under mechanical confinement, where surrounding structures restrict shape changes during cytokinesis. We analyze a minimal model of a dividing cell as an incompressible volume bounded by an interface with effective isotropic tension, and show that confinement imposes a minimum attainable furrow radius. Beyond this limit, the cytokinetic ring can continue to contract within a septum without further furrow ingression, leaving the cell shape, mitotic pressure, and transmitted force unchanged. We determine this confinement-limited state for rigid parallel walls, soft axial confinement, and three-dimensional enclosures. Between parallel walls, the limiting force and minimum furrow radius collapse onto universal curves when scaled by surface tension and cell size. In soft confinement, environmental stiffness and spindle forces select the operating point. In three-dimensional confinement, the free volume between the cell and the confinement controls force transmission and cell shape. This yields a method for inferring the mechanical state of a cell dividing in deformable three-dimensional confinement from its shape. The radius and tangent angle of the cell surface at the stalled furrow and at the point where the cell detaches from its surroundings determine the mitotic pressure and the axial force carried by the cell surface, relative to the cortical tension.

Related papers